Download or read book Effect of Temperature and other Factors on Plastics and Elastomers written by Laurence W. McKeen and published by William Andrew. This book was released on 2008-12-05 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an update to the first edition compiled and published in 1990 by William Woishnis. A lot has changed in the field since 1990 and a lot has not changed. There are new plastic materials. There has been a huge turnover in ownership of plastics producing companies. There has been a lot of consolidation, which of course means discontinued products. Thus, this update is much more extensive than the usual "next edition."It has been reorganized from a chemistry point of view. Plastics of similar polymer types are grouped into nine chapters. Each of these chapters includes an introduction with a brief explanation of the chemistry of the polymers used in the plastics.An extensive first chapter has been added as an introduction that summarizes the chemistry of making polymers, the formulation of plastics, testing and test methods, and plastic selection.Most plastic products and parts are expected to be used in environments other than room temperature and standard humidity conditions. Chapters 2-10 are a databank that serves as an evaluation of plastics as they are exposed to varying operating conditions at different temperatures, humidity, and other factors. Over 900 graphs for more than 45 generic families of plastics are contained in these chapters.Chapter 11 contains extensive mechanical and electrical data in tabular form. The tables contain data on several thousand plastics. Similarly, Chapter 12 contains thermal data on several thousand plastics. Data from the first edition have only been removed if those products were discontinued, and many products were. Product names and manufacturers have been updated. Detailed introductions of plastics properties, testing procedures, and principles of plastics design The only "databook" available on the effects of temperature and humidity conditions on plastics and elastomers More than 1,000 graphs and tables allow for easy comparison between products Covers more than 70 types of plastics, and summarizes the chemistry of each type
Download or read book The Effect of Temperature and Other Factors on Plastics written by and published by . This book was released on 1990 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effect of Temperature and Other Factors on Plastics and Elastomers written by Laurence W. McKeen and published by Noyes Publications. This book was released on 2008-01 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most plastic products and parts are expected to be used in environments other than room temperature and standard humidity conditions. Chapters 2-10 are a databank that serves as an evaluation of plastics as they are exposed to varying operating conditions at different temperatures, humidity, and other factors. Over 900 graphs for more than 45 generic families of plastics are contained in these chapters. Chapter 11 contains extensive mechanical and electrical data in tabular form. The tables contain data on several thousand plastics. Similarly, Chapter 12 contains thermal data on several thousand plastics. Data from the first edition have only been removed if those products were discontinued, and many products were. Product names and manufacturers have been updated. . Detailed introductions of plastics properties, testing procedures, and principles of plastics design. . The only "databook" available on the effects of temperature and humidity conditions on plastics and elastomers. .-
Download or read book The Effect of Temperature and Other Factors on Plastics and Elastomers Second Edition written by Laurence W. McKeen and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effect of Temperature and other Factors on Plastics and Elastomers written by Laurence W. McKeen and published by Elsevier. This book was released on 2023-04-04 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Effect of Temperature and Other Factors on the Properties of Plastics and Elastomers, Fourth Edition provides data on the wide spectrum of plastics and TPEs with special reference to thermal stability. The mechanical, physical and electrical properties of plastics and elastomers are described as a function of temperature and humidity to help with the design of lighter more cost-effective plastic parts to replace metal ones. In this new edition, expertly edited data makes it easy for readers to learn about the properties of plastic materials without having to search the general literature or depend on suppliers. Additional types of plastics are examined, and the latest data on material characteristics are provided. Complex details such as how the thermal prehistory can effect final mechanical properties, and how temperature scans reveal dynamic mechanical behavior are also examined to build a deeper understanding of the materials. Fully updated edition features full coverage of the new data, new plastics and applications that have emerged in recent years Features reorganization of plastics data by manufacturer, facilitating quick reference
Download or read book The Effect of Temperature and Other Factors on Plastics written by and published by . This book was released on 1990 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effect of Long Term Thermal Exposure on Plastics and Elastomers written by Laurence W. McKeen and published by William Andrew. This book was released on 2021-04-25 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Effect of Long Term Thermal Exposure on Plastics and Elastomers, Second Edition brings together a wide range of essential data on the effect of long-term thermal exposure on plastics and elastomers, enabling engineers to make optimal material choices and design decisions. This second edition has been thoroughly revised to include the latest data and materials. This highly valuable handbook will support engineers, product designers, R&D professionals, and scientists who are working on plastics products or parts for high temperature environments across a range of industries. This readily available data will make it easy for practitioners to learn about plastic materials and their long- term thermal exposure without having to search the general literature or depend on suppliers. This book will also be of interest to researchers and advanced students in plastics engineering, polymer processing, coatings, and materials science and engineering. Provides essential data and practical guidance for engineers and scientists working with plastics in high temperature environments Includes introductory chapters on the effect of heat aging and testing methods, providing the underpinning knowledge required to utilize the data Covers a wide range of commercial polymer classes that are updated to include the latest developments in plastics materials
Download or read book The Effect of Creep and Other Time Related Factors on Plastics and Elastomers written by Laurence W. McKeen and published by Elsevier. This book was released on 2009-06-25 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of the classic data book, The Effect of Creep and Other Time Related Factors on Plastics and Elastomers (originally published in 1991), has been extensively revised with the addition of an abundance of new data, the removal of all out-dated information, and the complete rebuilding of the product and company listings.This new edition also has been reorganized from a polymer chemistry point of view. Plastics of similar polymer types are grouped into chapters, each with an introduction that briefly explains the chemistry of the polymers used in the plastics. An extensive introductory chapter has also been added, which summarizes the chemistry of making polymers, the formulation of plastics, creep-testing, test methods, measurements, and charts, as well as theory and plastic selection.Each chapter is generally organized by product and concludes with comparisons of brand or generic products. The appendices include a list of trade names, plastics sold under those names, and manufacturer. A list of conversion factors for stress measures is also included.ABOUT THE AUTHORLaurence W. McKeen earned a B.S. in Chemistry from Rensselaer Polytechnic Institute in 1973 and a Ph.D. in 1978 from the University of Wisconsin. He began his career with DuPont in 1978 as a mass spectroscopist, but moved into product development in the Teflon® Finishes group in 1980. Dr. McKeen has accumulated over 28 years of experience in product development and applications, working with customers in a wide range of industries, which has led to the creation of dozens of commercial products. More than 8 core chapters, which serve as a databank for evaluating the creep of plastics Over 600 uniform graphs for more than 45 generic families of plastics are explained Types of graphs include: (1) Isochronous Stress–Strain Curves at Various Times and Temperatures (2) Creep Strain or Creep Deformation versus Time at Various Stress Levels and Temperatures (3) Various Modulus Measures (Tensile, Compressive, Flexural) versus Time at Various Temperatures (4) Hoop Stress versus Time at Various Temperatures (5) Stress Cracking and Other Plastics Failure versus Time (6) Creep Rupture versus Time
Download or read book Fatigue and Tribological Properties of Plastics and Elastomers written by Laurence W. McKeen and published by Butterworth-Heinemann. This book was released on 2009-11-17 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of a series of core databooks within the William Andrew Plastics Design Library, Fatigue and Tribological Properties of Plastics and Elastomers provides a comprehensive collection of graphical multipoint data and tabular data covering fatigue and tribology. The concept of fatigue is very straightforward: if an object is subjected to a stress or deformation, and it is repeated, the object becomes weaker. This weakening of plastic material is called fatigue. Tribology is the science and technology of surfaces in contact with each other and therefore covers friction, lubrication and wear. The reduction of wear and fatigue and the improvement of lubrication are key bottom-line issues for engineers and scientists involved in the plastics industry and product design with plastics. Fatigue and Tribological Properties of Plastics and Elastomers, Second Edition is an update of all that has changed in the world of plastics since the 1st edition appeared nearly 15 years ago, and has been reorganized from a polymer chemistry point of view. A hard-working reference tool: part of the daily workflow of engineers and scientists involved in the plastics industry and product design with plastics The reduction of wear and fatigue and the improvement of lubrication are key bottom-line issues The data in this book provide engineers with the tools they need to design for low failure rates
Download or read book The Effect of UV Light and Weather on Plastics and Elastomers written by Laurence W. McKeen and published by William Andrew. This book was released on 2013-06-21 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference guide brings together a wide range of essential data on the effects of weather and UV light exposure on plastics and elastomers, enabling engineers to make optimal material choices and design decisions. In both normal and extreme environments, outdoor use has a variety of effects on different plastics and elastomers, including discoloring and brittleness. The data is supported by explanations of real-world engineering applications. The data tables in this book are supported by examples of real-world applications, enabling engineers and scientists to select the right materials for a given situation, across a wide range of sectors including construction, packaging, signage, consumer (e.g. toys, outdoor furniture), automotive and aerospace, defense, etc. The third edition includes new text chapters that provide the fundamental knowledge required to make best use of the data. Author Larry McKeen has also added detailed descriptions of the effect of weathering on the most common polymer classes such as polyolefins, polyamides, polyesters, elastomers, fluoropolymers, biodegradable plastics, etc., making this book an invaluable design guide as well as an industry standard data source. Essential data and practical guidance for engineers and scientists working with plastics in outdoor applications and products New introductory chapters on weathering processes and the effect of light and heat on plastics 25% new data
Download or read book The Effect of UV Light and Weather on Plastics and Elastomers written by Laurence W. McKeen and published by William Andrew. This book was released on 2019-03-22 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Effect of UV Light and Weather on Plastics and Elastomers, Fourth Edition, provides critical data on the effect of UV light and weathering on plastics and elastomers, enabling engineers, designers and R&D professionals to select the right materials when developing plastics products for a range of industries and applications. This information will also support academic researchers and scientists in developing polymeric materials for advanced applications. Provides vital data on the effects of weather and UV light exposure on plastics and elastomers Offers practical guidance for engineers and scientists working with plastics for outdoor applications Expanded revision includes the latest data, polymer classes and newly available materials, including bio-based polymers and plastics for 3D printing
Download or read book The Effect of Creep and other Time Related Factors on Plastics and Elastomers written by Laurence W. McKeen and published by William Andrew. This book was released on 2014-08-26 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference guide brings together a wide range of critical data on the effect of creep and other long term effects on plastics and elastomers, enabling engineers to make optimal material choices and design decisions. The data are supported by explanations of how to make use of the data in real world engineering contexts and provides the long-term properties data that designers need to create a product that will stand the test of time.This new edition represents a full update of the data, removing all obsolete data, adding new data, and updating the list of plastics manufacturers. Additional plastics have also been included for polyesters, polyamides and others where available, including polyolefins, elastomers and fluoropolymers. Entirely new sections on biodegradable polymers and thermosets have been added to the book.The level of data included – along with the large number of graphs and tables for easy comparison – saves readers the need to contact suppliers, and the selection guide has been fully updated, giving assistance on the questions which engineers should be asking when specifying materials for any given application. Trustworthy, current data on creep, stress-strain and environmental stress cracking, enabling easier and more effective material selection and product design. Includes expert guidance to help practitioners make best use of the data. Entirely new sections added on sustainable and biodegradable polymers, and thermosets.
Download or read book Hollow Glass Microspheres for Plastics Elastomers and Adhesives Compounds written by Steve E Amos and published by Elsevier. This book was released on 2015-04-30 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hollow Glass Microspheres for Plastics, Elastomers, and Adhesives Compounds brings together, for the first time, all of the practical and theoretical aspects of glass bubble manufacturing, including its properties, processing, and applications, as well as regulatory, environmental, and health and safety aspects. The book enables the reader to evaluate the applicability of glass bubbles to various applications involving polymers in thermoplastics, elastomers, liquid thermosets, and adhesives. It is an indispensible guide for material selection and improving sustainability of products. Related data sets and case studies complement the book, making it a reference book for plastics processors, product designers, and engineers working with plastics and elastomers, and anyone who wants to improve functionality and performance, make their products lighter, longer lasting, and stronger, all while reducing costs and material needs. Provides best practices for plastics and rubber processing with glass bubbles Synthesizes all of the practical and theoretical aspects of glass bubble manufacturing, including its properties, applications, and more Describes different end-use applications and how glass bubbles influence various properties, including mechanical, structural, thermal, and optical properties in these applications A one-stop reference book that also covers the regulatory and environmental aspects of this important additive
Download or read book The Effect of Sterilization on Plastics and Elastomers written by Laurence W. McKeen and published by William Andrew. This book was released on 2018-02-22 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Effect of Sterilization Methods on Plastics and Elastomers, Fourth Edition brings together a wide range of essential data on the sterilization of plastics and elastomers, thus enabling engineers to make optimal material choices and design decisions. The data tables in this book enable engineers and scientists to select the right materials and sterilization method for a given product or application. The book is a unique and essential reference for anybody working with plastic materials that are likely to be exposed to sterilization methods, be it in medical device or packaging development, food packaging or other applications. Presents essential data and practical guidance for engineers and scientists working with plastics in applications that require sterile packaging and equipment Updated edition removes obsolete data, updates manufacturers, verifies data accuracy, and adds new plastics materials for comparison Provides essential information and guidance for FDA submissions required for new medical devices
Download or read book Fluoroelastomers Handbook written by Jiri George Drobny and published by William Andrew. This book was released on 2016-04-27 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluoroelastomers Handbook: The Definitive User's Guide, Second Edition is a comprehensive reference on fluoroelastomer chemistry, processing technology, and applications. It is a must-have reference for materials scientists and engineers in the automotive, aerospace, chemical, chemical process, and power generation industries. Covering both physical and mechanical properties of fluoroelastomers, it is useful in addressing daily challenges in the use of these materials, as well as the challenges posed in long-term research and development programs. Since the publication of the previous edition in 2005, many new findings and developments in chemistry, technology, and applications of fluoroelastomers have taken place. This is the only book with updated information on the manufacturing process, cross-linking chemistry and the formulation of compounds, as well as mixing, processing, and curing methods. A fully revised chapter is included on applications and examples of fluoroelastomer compounds. Safety, hygiene, and disposal standards and guidelines have been updated, and a new chapter has been added to discuss new developments and current trends, helping engineers and materials scientists stay ahead of the curve. Presents the only definitive reference work on fluoroelastomer chemistry, processing technology, and applications Helps engineers and materials scientists with the day-to-day challenges of using fluoroelastomers, as well as long-term research and development programs Includes fully updated chapters on the chemistry, manufacture, and processing of fluoroelastomers, as well as information on properties, applications, disposal, and safety issues
Download or read book Brydson s Plastics Materials written by Marianne Gilbert and published by William Andrew. This book was released on 2016-09-27 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brydson's Plastics Materials, Eighth Edition, provides a comprehensive overview of the commercially available plastics materials that bridge the gap between theory and practice. The book enables scientists to understand the commercial implications of their work and provides engineers with essential theory. Since the previous edition, many developments have taken place in plastics materials, such as the growth in the commercial use of sustainable bioplastics, so this book brings the user fully up-to-date with the latest materials, references, units, and figures that have all been thoroughly updated. The book remains the authoritiative resource for engineers, suppliers, researchers, materials scientists, and academics in the field of polymers, including current best practice, processing, and material selection information and health and safety guidance, along with discussions of sustainability and the commercial importance of various plastics and additives, including nanofillers and graphene as property modifiers. With a 50 year history as the principal reference in the field of plastics material, and fully updated by an expert team of polymer scientists and engineers, this book is essential reading for researchers and practitioners in this field. Presents a one-stop-shop for easily accessible information on plastics materials, now updated to include the latest biopolymers, high temperature engineering plastics, thermoplastic elastomers, and more Includes thoroughly revised and reorganised material as contributed by an expert team who make the book relevant to all plastics engineers, materials scientists, and students of polymers Includes the latest guidance on health, safety, and sustainability, including materials safety data sheets, local regulations, and a discussion of recycling issues
Download or read book Using the Engineering Literature written by Bonnie A. Osif and published by CRC Press. This book was released on 2006-08-23 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of engineering is becoming increasingly interdisciplinary, and there is an ever-growing need for engineers to investigate engineering and scientific resources outside their own area of expertise. However, studies have shown that quality information-finding skills often tend to be lacking in the engineering profession. Using the Engineerin