Download or read book Influence of Material and Testing Parameters on the Lifetime of TBC Systems with MCrAlY and NiPtAl Bondcoats written by Peng Song and published by Forschungszentrum Jülich. This book was released on 2012 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Protective Systems for High Temperature Applications EFC 57 written by M. Schutze and published by CRC Press. This book was released on 2023-04-14 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a review of corrosion and thermal protection topics associated with coatings applied in high temperature applications, namely catalytic converters, combustion and steam environments, and gas turbines. Information on corrosion influencing mechanisms and their impact are reviewed.

Download or read book Thermal Barrier Coatings written by Hongbo Guo and published by Woodhead Publishing. This book was released on 2023-01-18 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Barrier Coatings, Second Edition plays a critical role in counteracting the effects of corrosion and degradation of exposed materials in high-temperature environments such as gas turbine and aero-engines. This updated edition reviews recent advances in the processing and performance of thermal barrier coatings, as well as their failure mechanisms. Novel technologies for the manufacturing of thermal barrier coatings (TBCs) such as plasma spray-physical vapor deposition and suspension plasma spray, are covered, as well as severe degradation of TBCs caused by CMAS attack. In addition to discussions of new materials and technologies, an outlook about next generation TBCs, including T/EBCs is discussed.This edition will provide the fundamental science and engineering of thermal barrier coatings for researchers in the field of TBCs, as well as students looking for a tutorial. - Includes coverage of emerging materials, such as rare-earth doped ceramics - Presents the latest on plasma spray-physical vapor deposition and suspension (solution precursor) - Discusses the degradation of TBCs caused by CMAS attack and its protection - Looks at thermally environmental barrier coatings, interdiffusion and diffusion barrier

Download or read book Issues in Materials and Manufacturing Research 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 7150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Materials and Manufacturing Research: 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Materials and Manufacturing Research. The editors have built Issues in Materials and Manufacturing Research: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Materials and Manufacturing Research in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Materials and Manufacturing Research: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Download or read book Superalloys 2020 written by Sammy Tin and published by Springer Nature. This book was released on 2020-08-28 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 14th International Symposium on Superalloys (Superalloys 2020) highlights technologies for lifecycle improvement of superalloys. In addition to the traditional focus areas of alloy development, processing, mechanical behavior, coatings, and environmental effects, this volume includes contributions from academia, supply chain, and product-user members of the superalloy community that highlight technologies that contribute to improving manufacturability, affordability, life prediction, and performance of superalloys.

Download or read book Superalloys written by Matthew J. Donachie and published by ASM International. This book was released on 2002 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers virtually all technical aspects related to the selection, processing, use, and analysis of superalloys. The text of this new second edition has been completely revised and expanded with many new figures and tables added. In developing this new edition, the focus has been on providing comprehensive and practical coverage of superalloys technology. Some highlights include the most complete and up-to-date presentation available on alloy melting. Coverage of alloy selection provides many tips and guidelines that the reader can use in identifying an appropriate alloy for a specific application. The relation of properties and microstructure is covered in more detail than in previous books.

Download or read book Performance of MCrAlX coatings written by Pimin Zhang and published by Linköping University Electronic Press. This book was released on 2019-11-04 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: MCrAlY coatings (M=Ni and/or Co) are widely used for the protection of superalloy components against oxidation and hot corrosion in the hot sections of gas turbines. The drive for coating systems to bestow adequate oxidation and corrosion resistance upon the components becomes urgent as an inevitable result of the necessary improvement in engine combustion efficiency and service lifetime. Through the careful design of the composition, MCrAlY coating performance can be optimized to meet the needs under different service conditions and component materials, therefore, “MCrAlX”, with “X” stands for the minor alloying elements, is used to highlight the effect. In the present thesis, the performance of new MCrAlX coatings is investigated with respect to oxidation, hot corrosion and interactions between coating-superalloy substrates. Oxidation of MCrAlX coatings can be generally categorized into initial, steady and close-to-end stages. Coating performance can be affected by various factors at different stages, therefore, experiments were designed by targeting the oxidation stages. Investigation on the initial stage oxidation behavior of MCrAlY coatings with post-deposition surface treatments reveals the different growth mechanisms of alumina scales. Surface treatments significantly reduce the alumina growth rate by suppressing transient alumina development and aiding the early formation of ?-Al2O3, which improves the long-term oxidation performance of the coating. Similarly, the modification of minor alloy elements in MCrAlX coatings also serves the purpose. The oxidation behavior of new MCrAlX coatings was investigated at the steady oxidation stage, followed by the microstructure observation, thermodynamic and kinetic simulations. As an alternative reactive element addition of Y, Ce shows a negative effect on the formation of columnar alumina scales of high strain tolerance. In comparison, Fe or Ru addition shows no influence on alumina growth, rather than strengthening the phase stability in the coating and reducing the interdiffusion between coating-substrate through different mechanisms. As the oxidation proceeds to the close-to-end stage, a reliable criterion to estimate the capability of coating to form ?-Al2O3 is of great importance to accurately evaluate coating lifetime. A temperature-dependent critical Al-activity criterion was proposed to better predict the formation of a continuous ?-Al2O3 scale based on correction of elemental activity using thermodynamic database to replace the empirical Al-concentration based criterion. Severe interdiffusion occurs between coating-substrate during high temperature oxidation, accelerating the degradation of the system. Interdiffusion behavior of diffusion couples of superalloys-MCrAlX coatings were examined. It is highlighted that the recrystallization of superficial layer of the substrate contributes to the secondary reaction zone formation and element interdiffusion controls subsequent zone thickening. Study on Type I hot corrosion behavior of new MCrAlX coatings shows that the addition of Fe has no influence on basic fluxing reactions before severe Al depletion from the coating occurs. Instead, it boosts the “effective” Al supply of coating by shifting the equilibrium concentration of Al in the ? phase to a low Al level. Besides, the pre-mature coating degradation at the coating-substrate interface was due to the fast growth of corrosion products from substrate induced large local volume expansions, resulting in early coating spallation. MCrAlY ytbeläggningar (M=Ni och/eller Co) används ofta för att skydda komponenter tillverkade av superlegeringar mot oxidation samt högtemperaturskorrosion i de heta gasturbindelarna. Förbättrad förbränningseffektivitet och livslängd hos gasturbiner, gör att ytbeläggningssystemen måste besitta adekvata oxidations- och korrosionsmotstånd. Genom att omsorgsfullt utforma den kemiska sammansättningen hos MCrAlY ytbeläggningar kan deras prestanda optimeras för att möta kraven från olika driftförhållanden samt olika substratmaterial, därför används beteckningen "MCrAlX" för att belysa förändringar av den kemiska kompositionen, där "X" står för reaktiva legeringsämnen som tillsätts i mindre mängder. I denna avhandling undersöks prestandan hos en ny MCrAlX ytbeläggning med hänsyn till oxidation, högtemperaturskorrosion och interaktionen mellan ytbeläggningen och superlegeringssubstratet. Oxidation av MCrAlX ytbeläggningar kan generellt kategoriseras i tre faser; initiala, stabila och nära-slutet fasen. Ytbeläggningens prestanda kan påverkas av olika faktorer vid de olika faserna, därför utformades olika experiment för att undersöka de olika oxidationsfaserna. Undersökningen av den initiala fasen av oxidationsbeteendet hos MCrAlX ytbeläggningar som genomgått ytbehandlingar efter ytbeläggningsdeponeringen avslöjade olika tillväxtmekanismer hos aluminiumoxidskikten. Aluminiumoxidens tillväxthastighet reducerades signifikant av ytbehandlingarna, detta genom att undertrycka utvecklingen av övergående aluminiumoxid och bistå den tidiga tillväxten av ?-Al2O3, vilket förbättrar ytbeläggningens oxidationsprestanda långsiktigt. De reaktiva legeringsämnena som tillsätts i mindre mänger påverkar ytbeläggningens oxidationsprestanda på liknande sätt. Oxidationsbeteendet hos de nya MCrAlX ytbeläggningarna i den stabila fasen följdes av mikrostrukturundersökning, termodynamiska och kinetiska simuleringar. Det framkom att Ce visar en negativ effekt på bildandet av kolumnära aluminiumoxidskikt med hög töjningstolerans som alternativt reaktivt legeringsämne till Y. Jämförelsevis ger Fe- eller Ru-tillsatser ingen påverkan på aluminiumoxidtillväxten, förutom att det förstärker fasstabiliteten i ytbeläggningen samt genom olika mekanismer reducerar interdiffusionen mellan ytbeläggningen och substratet. När oxidationsprocessen kommit till nära-slutet fasen, är det viktigt att uppskatta kapaciteten hos en ytbeläggning att bilda ?-Al2O3, detta då det är ett tillförlitligt kriterium för att noggrant kunna utvärdera ytbeläggningens livslängd. Därför föreslogs ett temperaturberoende kriterium för kritisk Al-aktivitet för att bättre kunna förutsäga bildandet av ett kontinuerligt ?-Al2O3-skikt. Kriteriet baserades på korrigering av legeringsämnens aktivitet genom att använda en termodynamisk databas, detta för att ersätta det empiriska Al-koncentrations baserade kriteriet. Vid högtemperatursoxidation sker en omfattande interdiffusion mellan ytbeläggningen och substratet, vilket accelererar degraderingen av ytbeläggningssystemet. Därför har interdiffusionsbeteendet mellan superlegeringssubstratet och MCrAlX ytbeläggningen undersökts i denna avhandling. Det framkom att rekristallisationen av ytliga skikt av substratet bidrar till formationen av den sekundära reaktionszonen och att interdiffusion kontrollerar zonens efterföljande tjocklektillväxt. Undersökningen av Typ I högtemperaturskorrosionsbeteendet hos en ny MCrAlX ytbeläggning visar att legeringstillägg av Fe inte påverkar de grundläggande flödesreaktionerna innan en kritisk Al utarmning sker i ytbeläggningen. Istället stimulerar det tillförseln av Al genom att skifta jämviktskoncentrationen av Al i ? fasen till en låg nivå av Al. Det framkom också att den tidiga degraderingen av ytbeläggningen vid gränsskiktet mellan ytbeläggningen och substratet kommer av att den snabba tillväxten av korrosionsprodukter från substratet inducerade en stor lokal volymsutvidgning, vilket ledde till tidig ytbeläggningsspallation.

Download or read book Design of Thermal Barrier Coatings written by Mohit Gupta and published by Springer. This book was released on 2015-05-05 with total page 93 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the relationships between microstructure, interface roughness, and properties of thermal barrier coatings. The author proposes a method for the reduction of the thermal conductivity of the ceramic layer in order to increase the lifetime of thermal barrier coatings. He includes models for the optimization of ceramic layer microstructure and interface roughness.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1989 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiannual, with semiannual and annual indexes. References to all scientific and technical literature coming from DOE, its laboratories, energy centers, and contractors. Includes all works deriving from DOE, other related government-sponsored information, and foreign nonnuclear information. Arranged under 39 categories, e.g., Biomedical sciences, basic studies; Biomedical sciences, applied studies; Health and safety; and Fusion energy. Entry gives bibliographical information and abstract. Corporate, author, subject, report number indexes.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1981 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Paper written by and published by . This book was released on 1988 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Coatings for High Temperature Structural Materials written by National Research Council and published by National Academies Press. This book was released on 1996-05-13 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book assesses the state of the art of coatings materials and processes for gas-turbine blades and vanes, determines potential applications of coatings in high-temperature environments, identifies needs for improved coatings in terms of performance enhancements, design considerations, and fabrication processes, assesses durability of advanced coating systems in expected service environments, and discusses the required inspection, repair, and maintenance methods. The promising areas for research and development of materials and processes for improved coating systems and the approaches to increased coating standardization are identified, with an emphasis on materials and processes with the potential for improved performance, quality, reproducibility, or manufacturing cost reduction.

Download or read book Advanced Ceramic Processing written by Adel Mohamed and published by . This book was released on 2015 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic oxides typically have a combination of properties that make them attractive for many applications compared with other materials. This book attempts to compile, unify, and present a recent development for the production techniques, such as electrochemical, foaming, and microwave sintering, of rare earth ceramic oxide materials. This book presents leading-edge research in this field from around the world. Although there is no formal partition of the book, the chapters cover several preparation methods for ceramic oxides, especially for coating and electrical applications. In addition, a fabrication foaming technique for porous ceramics with tailored microstructure along with distinctive properties is provided. The information provided in this book is very useful for a board of scientists and engineers from both academia and industry.

Download or read book ASME Technical Papers written by and published by . This book was released on with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Environmental Barrier Coatings written by Kang N. Lee and published by MDPI. This book was released on 2020-12-29 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: The global increase in air travel will require commercial vehicles to be more efficient than ever before. Advanced engine hot section materials are a key technology required to keep fuel consumption and emission to a minimum in next-generation gas turbines. Ceramic matrix composites (CMCs) are the most promising material to revolutionize gas turbine hot section materials technology because of their excellent high‐temperature properties. Rapid surface recession due to volatilization by water vapor is the Achilles heel of CMCs. Environmental barrier coatings (EBCs) is an enabling technology for CMCs, since it protects CMCs from water vapor. The first CMC component entered into service in 2016 in a commercial engine, and more CMC components are scheduled to follow within the next few years. One of the most difficult challenges to CMC components is EBC durability, because failure of EBC leads to a rapid reduction in CMC component life. Key contributors to EBC failure include recession, oxidation, degradation by calcium‐aluminum‐magnesium silicates (CMAS) deposits, thermal and thermo‐mechanical strains, particle erosion, and foreign object damage (FOD). Novel EBC chemistries, creative EBC designs, and robust processes are required to meet EBC durability challenges. Engine-relevant testing, characterization, and lifing methods need to be developed to improve EBC reliability. The aim of this Special Issue is to present recent advances in EBC technology to address these issues. In particular, topics of interest include but are not limited to the following: • Novel EBC chemistries and designs; • Processing including plasma spray, suspension plasma spray, solution precursor plasma spray, slurry process, PS-PVD, EB-PVD, and CVD; • Testing, characterization, and modeling; • Lifing.

Download or read book Disease Control Priorities Third Edition Volume 6 written by King K. Holmes and published by World Bank Publications. This book was released on 2017-11-06 with total page 1027 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infectious diseases are the leading cause of death globally, particularly among children and young adults. The spread of new pathogens and the threat of antimicrobial resistance pose particular challenges in combating these diseases. Major Infectious Diseases identifies feasible, cost-effective packages of interventions and strategies across delivery platforms to prevent and treat HIV/AIDS, other sexually transmitted infections, tuberculosis, malaria, adult febrile illness, viral hepatitis, and neglected tropical diseases. The volume emphasizes the need to effectively address emerging antimicrobial resistance, strengthen health systems, and increase access to care. The attainable goals are to reduce incidence, develop innovative approaches, and optimize existing tools in resource-constrained settings.