Download or read book PDF Models for Mixing in Turbulent Reactive Flows written by Shankar Subramaniam and published by . This book was released on 1997 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Turbulent Premixed Flames written by Nedunchezhian Swaminathan and published by Cambridge University Press. This book was released on 2011-04-25 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: A work on turbulent premixed combustion is important because of increased concern about the environmental impact of combustion and the search for new combustion concepts and technologies. An improved understanding of lean fuel turbulent premixed flames must play a central role in the fundamental science of these new concepts. Lean premixed flames have the potential to offer ultra-low emission levels, but they are notoriously susceptible to combustion oscillations. Thus, sophisticated control measures are inevitably required. The editors' intent is to set out the modeling aspects in the field of turbulent premixed combustion. Good progress has been made on this topic, and this cohesive volume contains contributions from international experts on various subtopics of the lean premixed flame problem.

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1981 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Experimental Studies of Homogeneous Passive Scalars in Grid generated Turbulence written by Anuvat Sirivat and published by . This book was released on 1983 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Food Mixing written by P. J. Cullen and published by John Wiley & Sons. This book was released on 2009-07-21 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mixing of liquids, solids and gases is one of the most commonunit operations in the food industry. Mixing increases thehomogeneity of a system by reducing non-uniformity or gradients incomposition, properties or temperature. Secondary objectives ofmixing include control of rates of heat and mass transfer,reactions and structural changes. In food processing applications,additional mixing challenges include sanitary design, complexrheology, desire for continuous processing and the effects ofmixing on final product texture and sensory profiles. Mixing ensures delivery of a product with constant properties. Forexample, consumers expect all containers of soups, breakfastcereals, fruit mixes, etc to contain the same amount of eachingredient. If mixing fails to achieve the requiredproduct yield, quality, organoleptic or functional attributes,production costs may increase significantly. This volume brings together essential information on theprinciples and applications of mixing within food processing. Whilethere are a number of creditable references covering generalmixing, such publications tend to be aimed at the chemical industryand so topics specific to food applications are often neglected.Chapters address the underlying principles of mixing, equipmentdesign, novel monitoring techniques and the numerical techniquesavailable to advance the scientific understanding of food mixing.Food mixing applications are described in detail. The book will be useful for engineers and scientists who need tospecify and select mixing equipment for specific processingapplications and will assist with the identification and solving ofthe wide range of mixing problems that occur in the food,pharmaceutical and bioprocessing industries. It will also be ofinterest to those who teach, study and research food science andfood engineering.

Download or read book Ten Chapters in Turbulence written by Peter A. Davidson and published by Cambridge University Press. This book was released on 2013 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Leading experts summarize our current understanding of the fundamental nature of turbulence, covering a wide range of topics.

Download or read book Recent Awards in Engineering written by and published by . This book was released on 1983 with total page 986 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IUTAM Symposium on Turbulent Mixing and Combustion written by Andrew Pollard and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goals of the Symposium were to draw together researchers in turbulence and combustion so as to highlight advances and challenge the boundaries to our understanding of turbulent mixing and combus tion from both experimental and simulation perspectives; to facilitate cross-fertilization between leaders in these two fields. These goals were noted to be important given that turbulence itself is viewed as the last great problem in classical physics and the addition of chemical reaction amplifies the difficulties enormously. The papers that have been included here reflect the richness of our subject. Turbulence is rich and complex in its own right. And, its inner structure, hidden in the morass of scales, large and small, can dominate transport. Earlier IUTAM Symposia have considered this field, Eddy Structure Identification in Free Turbulent Flows, Bonnet and Glauser (eds) 1992 and Simulation and Identification of Organized Structures in Flows, Sorensen, Hopfinger and Aubry (eds) 1997. The combustion community is well served by its specialized events, most notable is the bi annual International Combustion Symposium, held under the auspices of the Combustion Institute. Mixing is often considered somewhere in between these two. This broad landscape was addressed in this Sym posium in a somewhat temporal linear fashion of increasing complexity. The lectures considered the many challenges posed by adding one ele ment to the base formed by others: turbulence and turbulent mixing in the absence of combustion through to turbulent mixing dominated by chemistry and combustion.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 1572 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Research in Engineering and Applied Science at Cornell University written by and published by . This book was released on 1987 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Atmospheric Boundary Layer written by J. R. Garratt and published by Cambridge University Press. This book was released on 1994-04-21 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives a comprehensive and lucid account of the science of the atmospheric boundary layer (ABL). There is an emphasis on the application of the ABL to numerical modelling of the climate. The book comprises nine chapters, several appendices (data tables, information sources, physical constants) and an extensive reference list. Chapter 1 serves as an introduction, with chapters 2 and 3 dealing with the development of mean and turbulence equations, and the many scaling laws and theories that are the cornerstone of any serious ABL treatment. Modelling of the ABL is crucially dependent for its realism on the surface boundary conditions, and chapters 4 and 5 deal with aerodynamic and energy considerations, with attention to both dry and wet land surfaces and sea. The structure of the clear-sky, thermally stratified ABL is treated in chapter 6, including the convective and stable cases over homogeneous land, the marine ABL and the internal boundary layer at the coastline. Chapter 7 then extends the discussion to the cloudy ABL. This is seen as particularly relevant, since the extensive stratocumulus regions over the subtropical oceans and stratus regions over the Arctic are now identified as key players in the climate system. Finally, chapters 8 and 9 bring much of the book's material together in a discussion of appropriate ABL and surface parameterization schemes in general circulation models of the atmosphere that are being used for climate simulation.

Download or read book Large Eddy Simulation in Hydraulics written by Wolfgang Rodi and published by CRC Press. This book was released on 2013-06-27 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the Large-Eddy-Simulation (LES) method, geared primarily toward hydraulic and environmental engineers, the book covers special features of flows in water bodies and summarizes the experience gained with LES for calculating such flows. It can also be a valuable entry to the subject of LES for researchers and students in all fields of fluids engineering, and the applications part will be useful to researchers interested in the physics of flows governed by the dynamics of coherent structures.

Download or read book The Lattice Boltzmann Method written by Timm Krüger and published by Springer. This book was released on 2016-11-07 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to the theory, practice, and implementation of the Lattice Boltzmann (LB) method, a powerful computational fluid dynamics method that is steadily gaining attention due to its simplicity, scalability, extensibility, and simple handling of complex geometries. The book contains chapters on the method's background, fundamental theory, advanced extensions, and implementation. To aid beginners, the most essential paragraphs in each chapter are highlighted, and the introductory chapters on various LB topics are front-loaded with special "in a nutshell" sections that condense the chapter's most important practical results. Together, these sections can be used to quickly get up and running with the method. Exercises are integrated throughout the text, and frequently asked questions about the method are dealt with in a special section at the beginning. In the book itself and through its web page, readers can find example codes showing how the LB method can be implemented efficiently on a variety of hardware platforms, including multi-core processors, clusters, and graphics processing units. Students and scientists learning and using the LB method will appreciate the wealth of clearly presented and structured information in this volume.

Download or read book The Effect of Stable Stratification on Decaying Grid generated Turbulence written by Kyunghwan Yoon and published by . This book was released on 1989 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Turbulence in Rotating Stratified and Electrically Conducting Fluids written by P. A. Davidson and published by Cambridge University Press. This book was released on 2013-09-12 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are two recurring themes in astrophysical and geophysical fluid mechanics: waves and turbulence. This book investigates how turbulence responds to rotation, stratification or magnetic fields, identifying common themes, where they exist, as well as the essential differences which inevitably arise between different classes of flow. The discussion is developed from first principles, making the book suitable for graduate students as well as professional researchers. The author focuses first on the fundamentals and then progresses to such topics as the atmospheric boundary layer, turbulence in the upper atmosphere, turbulence in the core of the earth, zonal winds in the giant planets, turbulence within the interior of the sun, the solar wind, and turbulent flows in accretion discs. The book will appeal to engineers, geophysicists, astrophysicists and applied mathematicians who are interested in naturally occurring turbulent flows.

Download or read book Advances in Turbulence XI written by J. M. L. M. Palma and published by Springer Science & Business Media. This book was released on 2008-01-08 with total page 825 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises the communications presented at the ETC 11, the EUROMECH European Turbulence conference held in 2007 in Porto. The scientific committee has chosen the contributions out of the following topics: Acoustics of turbulent flows; Atmospheric turbulence; Control of turbulent flows; Geophysical and astrophysical turbulence; Instability and transition; Intermittency and scaling; Large eddy simulation and related techniques; MHD turbulence; Reacting and compressible turbulence; Transport and mixing; Turbulence in multiphase and non-Newtonian flows; Vortex dynamics and structure formation; Wall bounded flows.

Download or read book Advanced Approaches in Turbulence written by Paul Durbin and published by Elsevier. This book was released on 2021-07-24 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Approaches in Turbulence: Theory, Modeling, Simulation and Data Analysis for Turbulent Flows focuses on the updated theory, simulation and data analysis of turbulence dealing mainly with turbulence modeling instead of the physics of turbulence. Beginning with the basics of turbulence, the book discusses closure modeling, direct simulation, large eddy simulation and hybrid simulation. The book also covers the entire spectrum of turbulence models for both single-phase and multi-phase flows, as well as turbulence in compressible flow. Turbulence modeling is very extensive and continuously updated with new achievements and improvements of the models. Modern advances in computer speed offer the potential for elaborate numerical analysis of turbulent fluid flow while advances in instrumentation are creating large amounts of data. This book covers these topics in great detail. - Covers the fundamentals of turbulence updated with recent developments - Focuses on hybrid methods such as DES and wall-modeled LES - Gives an updated treatment of numerical simulation and data analysis