Download or read book Supported Metals in Catalysis written by James Arthur Anderson and published by World Scientific. This book was released on 2012 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from experts in supported metal catalysis, from both the industry and academia, this book presents the latest developments in characterization and application of supported metals in heterogeneous catalysis. In addition to a thorough and updated coverage of the traditional aspects of heterogeneous catalysis such as preparation, characterization and use in well-established technologies such as Naphtha reforming, the book also includes emerging areas where supported metal catalysis will make significant contributions in future developments, such as fuel cells and fine chemicals synthesis. The second edition of Supported Metals in Catalysis comes complete with new and updated chapters containing important summaries of research in a rapidly evolving field. Very few other books deal with this highly pertinent subject matter, and as such, it is a must-have for anyone working in the field of heterogeneous catalysis.

Download or read book Strong Metal support Interactions written by R. T. K. Baker and published by . This book was released on 1986 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Catalysis By Gold written by Geoffrey C Bond and published by World Scientific. This book was released on 2006-08-15 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gold has traditionally been regarded as inactive as a catalytic metal. However, the advent of nanoparticulate gold on high surface area oxide supports has demonstrated its high catalytic activity in many chemical reactions. Gold is active as a heterogeneous catalyst in both gas and liquid phases, and complexes catalyse reactions homogeneously in solution. Many of the reactions being studied will lead to new application areas for catalysis by gold in pollution control, chemical processing, sensors and fuel cell technology. This book describes the properties of gold, the methods for preparing gold catalysts and ways to characterise and use them effectively in reactions. The reaction mechanisms and reasons for the high activities are discussed and the applications for gold catalysis considered./a

Download or read book Recent Advances in Electrochemical Promotion of Catalysis written by Philippe Vernoux and published by Springer Nature. This book was released on 2022-10-03 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume provides a critical review of research in the field of Electrochemical Promotion of Catalysis (EPOC). It presents recent developments during the past decade that have led to a better understanding of the field and towards applications of the EPOC concept. The chapters focus on the implementation of EPOC for developing sinter-resistant catalysts, catalysts for hydrogen production, ammonia production and carbon dioxide valorization. The book also highlights the developments towards electropromoted dispersed catalysts and for self-sustained electrochemical promotion which are currently expanding. This authoritative analysis of EPOC is useful for various scientific communities working at the interface of heterogeneous catalysis, solid state electrochemistry and materials science. It is of particular interest to groups whose research focuses on developments towards a better and more sustainable future.

Download or read book Catalyst Preparation written by John Regalbuto and published by CRC Press. This book was released on 2016-04-19 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text explores the optimization of catalytic materials through traditional and novel methods of catalyst preparation, characterization, and monitoring for oxides, supported metals, zeolites, and heteropolyacids. It focuses on the synthesis of bulk materials and of heterogeneous materials, particularly at the nanoscale. The final chapters examine pretreatment, drying, finishing effects, and future applications involving catalyst preparation and the technological advances necessary for continued progress. Topics also include heat and mass transfer limitations, computation methods for predicting properties, and catalyst monitoring on laboratory and industrial scales.

Download or read book The Development of Catalysis written by Adriano Zecchina and published by John Wiley & Sons. This book was released on 2017-04-03 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gradually brings the reader, through illustrations of the most crucial discoveries, into the modern world of chemical catalysis. Readers and experts will better understand the enormous influence that catalysis has given to the development of modern societies. • Highlights the field's onset up to its modern days, covering the life and achievements of luminaries of the catalytic era • Appeals to general audience in interpretation and analysis, but preserves the precision and clarity of a scientific approach • Fills the gap in publications that cover the history of specific catalytic processes

Download or read book Heterogeneous Catalysis in Sustainable Synthesis written by Bela Torok and published by Elsevier. This book was released on 2021-09-17 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterogeneous Catalysis in Sustainable Synthesis is a practical guide to the use of solid catalysts in synthetic chemistry that focuses on environmentally benign applications. Collating essential information on solid catalysts into a single volume, it reveals how the efficient use of heterogeneous catalysts in synthetic chemistry can support sustainable applications. Beginning with a review of the fundamentals of heterogeneous catalytic synthesis, the book then explores the basic concepts of heterogeneous catalytic reactions from adsorption to catalyst poisons, the use of non-traditional activation methods, recommended solvents, the major types of both metal and non-metal solid catalysts, and applications of these catalysts in sustainable synthesis. Based on the extensive experience of its expert author, this book aims to encourage and support synthetic chemists in using solid catalysts in their own work, while also highlighting the important link between heterogeneous catalysis and sustainability to all those interested. - Combines foundational knowledge with a focus on practical applications - Organizes information by reaction type, allowing readers to easily find examples of how to carry out specific reaction types with solid catalysts - Highlights emerging areas such as nanoparticle catalysis and metal-organic framework (MOF) based catalysts

Download or read book Nanoparticles in Catalysis written by Karine Philippot and published by John Wiley & Sons. This book was released on 2021-06-28 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoparticles in Catalysis Discover an essential overview of recent advances and trends in nanoparticle catalysis Catalysis in the presence of metal nanoparticles is an important and rapidly developing research field at the frontier of homogeneous and heterogeneous catalysis. In Nanoparticles in Catalysis, accomplished chemists and authors Karine Philippot and Alain Roucoux deliver a comprehensive guide to the key aspects of nanoparticle catalysis, ranging from synthesis, activation methodology, characterization, and theoretical modeling, to application in important catalytic reactions, like hydrogen production and biomass conversion. The book offers readers a review of modern and efficient tools for the synthesis of nanoparticles in solution or onto supports. It emphasizes the application of metal nanoparticles in important catalytic reactions and includes chapters on activation methodology and supported nanoclusters. Written by an international team of leading voices in the field, Nanoparticles in Catalysis is an indispensable resource for researchers and professionals in academia and industry alike. Readers will also benefit from the inclusion of: A thorough introduction to New Trends in the Design of Metal Nanoparticles and Derived Nanomaterials for Catalysis An exploration of Dynamic Catalysis and the Interface Between Molecular and Heterogeneous Catalysts A practical discussion of Metal Nanoparticles in Water: A Relevant Toolbox for Green Catalysis Organometallic Metal Nanoparticles for Catalysis A concise treatment of the opportunities and challenges of CO2 Hydrogenation to Oxygenated Chemicals Over Supported Nanoparticle Catalysts Perfect for catalytic, organic, inorganic, and physical chemists, Nanoparticles in Catalysis will also earn a place in the libraries of chemists working with organometallics and materials scientists seeking a one-stop resource with expert knowledge on the synthesis and characterization of nanoparticle catalysis.

Download or read book Catalysis and Electrocatalysis at Nanoparticle Surfaces written by Andrzej Wieckowski and published by CRC Press. This book was released on 2003-02-19 with total page 970 pages. Available in PDF, EPUB and Kindle. Book excerpt: Illustrating developments in electrochemical nanotechnology, heterogeneous catalysis, surface science and theoretical modelling, this reference describes the manipulation, characterization, control, and application of nanoparticles for enhanced catalytic activity and selectivity. It also offers experimental and synthetic strategies in nanoscale surface science. This standard-setting work clariefies several practical methods used to control the size, shape, crystal structure, and composition of nanoparticles; simulate metal-support interactions; predict nanoparticle behavior; enhance catalytic rates in gas phases; and examine catalytic functions on wet and dry surfaces.

Download or read book Metal Nanoparticles written by Daniel L. Fedlheim and published by CRC Press. This book was released on 2001-10-26 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: A state-of-the-art reference, Metal Nanoparticles offers the latest research on the synthesis, characterization, and applications of nanoparticles. Following an introduction of structural, optical, electronic, and electrochemical properties of nanoparticles, the book elaborates on nanoclusters, hyper-Raleigh scattering, nanoarrays, and several applications including single electron devices, chemical sensors, biomolecule sensors, and DNA detection. The text emphasizes how size, shape, and surface chemistry affect particle performance throughout. Topics include synthesis and formation of nanoclusters, nanosphere lithography, modeling of nanoparticle optical properties, and biomolecule sensors.

Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.

Download or read book Nanoporous Gold written by Arne Wittstock and published by Royal Society of Chemistry. This book was released on 2012-03-28 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-surface-area materials have recently attracted significant interest due to potential applications in various fields such as electrochemistry and catalysis, gas-phase catalysis, optics, sensors and actuators, energy harvesting and storage. In contrast to classical materials the properties of high-surface-area materials are no longer determined by their bulk, but by their nanoscale architecture. Nanoporous gold (np-Au) represents the fascinating class of mesoporous metals that have been intensively investigated in recent years. The current interest and the increasing number of scientific publications show that np-Au by itself is an outstanding nano-material that justifies a book devoted to all aspects of its properties and applications. The resulting publication is a discussion of this unique nano-material and is an accessible and comprehensive introduction to the field. The book provides a broad, multi-disciplinary platform to learn more about the properties of nanoporous gold from an inter-disciplinary perspective. It starts with an introduction and overview of state-of-the-art applications and techniques characterizing this material and its applications. It then covers the progress in research within the last years. The chapters are in-depth overviews written by the world's leading scientists in the particular field. Each chapter covers one technique or application so that the reader can easily target their favoured topic and will get the latest and state-of-the-art information in the field.

Download or read book Supported Metal Single Atom Catalysis written by Philippe Serp and published by Wiley-VCH. This book was released on 2022-02-22 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: b”Supported Metal Single Atom CatalysisCovers all key aspects of supported metal single atom catalysts, an invaluable resource for academic researchers and industry professionals alike Single atom catalysis is one of the most innovative and dynamic research areas in catalysis science. Supported metal catalysts are used extensively across the chemical industry, ranging from fine and bulk chemical production to petrochemicals. Single atom catalysts (SACs) combine the advantages of both homogeneous and heterogeneous catalysts such as catalyst stability, activity, and high dispersion of the active phase. Supported Metal Single Atom Catalysis provides an authoritative and up-to-date overview of the emerging field, covering the synthesis, preparation, characterization, modeling, and applications of SACs. This comprehensive volume introduces the basic principles of single atom catalysis, describes metal oxide and carbon support materials for SAC preparation, presents characterization techniques and theoretical calculations, and discusses SACs in areas including selective hydrogenation, oxidation reactions, activation of small molecules, C-C bond formation, and biomedical applications. Highlights the activity, selectivity, and stability advantages of supported metal SACs compared to other heterogeneous catalysts Covers applications of SACs in thermal catalysis, electrocatalysis, and photocatalysis Includes chapters on single atom alloys and supported double and triple metal atom catalysts Discusses the prospects, challenges, and potential industrial applications of SACs Supported Metal Single Atom Catalysis is an indispensable reference for all those working in the fields of catalysis, solid-state chemistry, materials science, and spectroscopy, including catalytic chemists, organic chemists, electrochemists, theoretical chemists, and industrial chemists.

Download or read book Electrochemical Activation of Catalysis written by Costas G. Vayenas and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: I knew nothing of the work of C. G. Vayenas on NEMCA until the early nineties. Then I learned from a paper of his idea (gas interface reactions could be catalyzed electrochemically), which seemed quite marvelous; but I did not understand how it worked. Consequently, I decided to correspond with Professor Vayenas in Patras, Greece, to reach a better understanding of this concept. I think that my early papers (1946, 1947, and 1957), on the relationship between the work function of metal surfaces and electron transfer reactions thereat to particles in solution, held me in good stead to be receptive to what Vayenas told me. As the electrode potential changes, so of course, does the work function at the interface, and gas metal reactions there involve adsorbed particles which have bonding to the surface. Whether electron transfer is complete in such a case, or whether the effect is on the desorption of radicals, the work function determines the strength of their bonding, and if one varies the work function by varying the electrode potential, one can vary the reaction rate at the interface. I got the idea. After that, it has been smooth sailing. Dr. Vayenas wrote a seminal article in Modern Aspects of Electrochemistry, Number 29, and brought the field into the public eye. It has since grown and its usefulness in chemical catalytic reactions has been demonstrated and verified worldwide.

Download or read book Nanocatalysis written by Ulrich Heiz and published by Springer Science & Business Media. This book was released on 2007-01-10 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocatalysis, a subdiscipline of nanoscience, seeks to control chemical reactions by changing the size, dimensionality, chemical composition, and morphology of the reaction center and by changing the kinetics using nanopatterning of the reaction center. This book offers a detailed pedagogical and methodological overview of the field. Readers discover many examples of current research, helping them explore new and emerging applications.

Download or read book Catalytic Application of Nano Gold Catalysts written by Neeraj Kumar Mishra and published by BoD – Books on Demand. This book was released on 2016-08-31 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gold, considered catalytically inactive for a long time, is now a fascinating partner of modern chemistry, as scientists such as Bond, Teles, Haruta, Hutchings, Ito and Hayashi opened new perspectives for the whole synthetic chemist community. Recently gold has attracted significant attention due to its advantageous characteristics as a catalytic material and since it allows easy functionalization with biologically active molecules. In this context, when gold is prepared as very small particles, it turns out to be a highly active catalyst. However, such a phenomenon completely disappears when the gold particle size grows into the micrometer range. Therefore, the preparation for obtaining an active gold catalyst is so important. The primary objective of this book is to provide a comprehensive overview of gold metal nanoparticles and their application as promising catalysts.

Download or read book Graphdiyne written by Yuliang Li and published by John Wiley & Sons. This book was released on 2022-01-10 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphdiyne Discover the most cutting-edge developments in the study of graphdiyne from a pioneer of the field In Graphdiyne: Fundamentals and Applications in Renewable Energy and Electronics, accomplished chemist Dr. Yuliang Li delivers a practical and insightful compilation of theoretical and experimental developments in the study of graphdiyne. Of interest to both academics and industrial researchers in the fields of nanoscience, organic chemistry, carbon science, and renewable energies, the book systematically summarizes recent research into the exciting new material. Discover information about the properties of graphdiyne through theoretical simulations and experimental characterizations, as well as the development of graphdiyne with appropriate preparation technology. Learn to create new graphdiyne-based materials and better understand its intrinsic properties. Find out about synthetic methodologies, the controlled growth of aggregated state structures, and structural characterization. In addition to demonstrating the interdisciplinary potential and relevance of graphdiyne, the book also offers readers: A thorough introduction to basic structure and band gap engineering, including molecular and electronic structure, mechanical properties, and the layers structure of bulk graphdiyne Explorations of Graphdiyne synthesis and characterization, including films, nanotube arrays and nanowires, nanowalls, and nanosheets, as well as characterization methods Discussions of the functionalization of graphdiyne, including heteroatom doping, metal decoration, and absorption of guest molecules Rigorous treatments of Graphdiyne-based materials in catalytic applications, including photo- and electrocatalysts Perfect for organic chemists, electronics engineers, materials scientists, and physicists, Graphdiyne: Fundamentals and Applications in Renewable Energy and Electronics will also find its place on the bookshelves of surface and solid-state chemists, electrochemists, and catalytic chemists seeking a one-stop reference on this rising-star carbon material.