Download or read book Effect of Composition on the Corrosion Behavior of 316 Stainless Steel in Flowing Sodium written by J. F. Bates and published by . This book was released on 1976 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effect of Composition on the Corrosion Behavior of 316 Stainless Steel in Flowing Sodium sup 54 Mn Release Rate written by and published by . This book was released on 1976 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Type 316 stainless steel specimens irradiated and non-irradiated, with minor variations in C, N, Cr, Ni, Si, and Mn content, were exposed to flowing sodium in the Source Term Control Loop-1 facility. Test conditions of 604/sup 0/C, a sodium velocity of 6.7 m/s, and an oxygen content of 0.5 and 2.5 ppM were used to ascertain the effect of these compositional variations on the corrosion rate and on the /sup 54/Mn release rate. Variations in C, N, and Mn had no significant effect on the corrosion rate. The corrosion rate increased somewhat as the Ni and Si content of the steel was increased, and decreased with an increase in Cr content. Microprobe examination showed preferential leaching of Mn, Si, Cr, and Ni to depths of up to 10 .mu.m (0.4 mil) after exposure times ranging from 5000 to 8000 hours. Variations in natural (/sup 55/Mn) content did not affect release rates of /sup 54/Mn generated by /sup 54/Fe(n, p)/sup 54/Mn. 10 fig, 4 tables. (auth).
Download or read book ERDA Energy Research Abstracts written by United States. Energy Research and Development Administration and published by . This book was released on 1977 with total page 1104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion by Liquid Metals written by J. E. Draley and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Corrosion Resistant Metals Committee and the Nuclear Metallurgy Committee of the Institute of Metals Division of The Metallurgical Society of AlME sponsored a 2-1/2 day symposium on "Corrosion by Liquid Metals". The symposium was held in Philadelphia, October 13-15, 1969, during the 1969 Fall Meeting of the Metallurgical Society and the Materials Engineering Con gress of the American Society for Metals. Cosponsors included the American Society for Metals and the American Nuclear Society. The purpose of the symposium was to bring together the several aspects of the subject of corrosion by liquid metals, so that perspective could be provided on the entire subject, to help in dividuals dealing with liquid metal corrosion problems acquire a sound basis of understanding, and to provide an opportunity for discussion between those doing research in this field. An exposition of the subject is timely, in view of the in creasing development of liquid metal heat and power sources for special purposes, including heat-pipe systems, NASA's SNAP power systems, and the AEC's liquid metal fast breeder reactor system. This book contains the proceedings of the symposium divided into four separate topics: I. Corrosion of Steels by Sodium, II. Alkali-Refractory Metal Interactions, III. Corrosion by Non-Alkali Metals, and IV. Analysis of Solid-Liquid Metal Inter actions (two sessions).
Download or read book ERDA Energy Research Abstracts written by United States. Energy Research and Development Administration. Technical Information Center and published by . This book was released on 1976 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Characteristics Mechanisms and Control Methods of Candidate Alloys in Sub and Supercritical Water written by Donghai Xu and published by Springer Nature. This book was released on 2021-12-07 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide comprehensive and systematic introduction and summary of corrosion characteristics, mechanisms, and control methods of candidate alloys in sub- and supercritical water environment. First of all, corrosion types of candidate alloys and the effects of major alloying elements on corrosion resistance of potential alloys in sub- and supercritical water are compared and analyzed. At the same time, research status of candidate materials, and development and application trends of several corrosion-resistant alloys are summarized. Then, corrosion characteristics of Ni-Cr, Ni-Cr-Mo, Ni-Fe-Cr and Ni-Fe-Cr-Mo-Cu corrosion-resistant alloys, FeCrAl alloy, and Zircaloy are discussed in detail, including the corrosion rate, the structure and composition of oxide film, and the effects of various surface treatment processes, etc. More specifically, it also investigates corrosion behavior of Ni-based alloy, Fe-Ni-based, and stainless steels in supercritical water. The effects of aggressive species on the corrosion behavior of Ni-base alloys are also explored in supercritical water. Readers will further discover the total corrosion processes and mechanisms of typical candidate alloys in sub- and supercritical water environment. Finally, the work explores the corrosion control methods such as ceramic coatings and passivation processes in supercritical water oxidation and in subcritical water, respectively. Future challenges and development trends of corrosion research of candidate materials in sub- and supercritical water environments are covered at the end of this book. It offers valuable reference for theoretically guiding material selection and design and operating parameter optimization of key equipment in the sub- and supercritical water technologies. The book is written for senior undergraduates, graduate students, scholars, and researchers who are interested in corrosion behavior of candidate materials of supercritical water oxidation system, supercritical water gasification system, and nuclear reactor.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1976-06 with total page 1216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ASM Specialty Handbook written by Joseph R. Davis and published by ASM International. This book was released on 1997-01-01 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials covered include carbon, alloy and stainless steels; alloy cast irons; high-alloy cast steels; superalloys; titanium and titanium alloys; refractory metals and alloys; nickel-chromium and nickel-thoria alloys; structural intermetallics; structural ceramics, cermets, and cemented carbides; and carbon-composites.
Download or read book Reactor Materials written by and published by . This book was released on 1970 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reactor Core Materials written by and published by . This book was released on 1970 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1978 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1982 with total page 1696 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ERDA Energy Research Abstracts written by and published by . This book was released on 1985 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metals Abstracts written by and published by . This book was released on 1998 with total page 1042 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book TID written by and published by . This book was released on 1972 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Tests and Standards written by Robert Baboian and published by ASTM International. This book was released on 2005 with total page 887 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Abstracts written by and published by . This book was released on 1982 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt:
