Download or read book Edge Plasma Phenomena in the Alcator C Mod Tokamak Measured by High Resolution X ray Imaging Diagnostics written by Thomas Sunn Pedersen and published by . This book was released on 2000 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: (cont.) A second array views the top of the plasma. The x-ray emissivity measured with this array also shows a distinct and narrow pedestal in H-mode. However, it is located significantly closer to the separatrix and is often narrower. Both of these differences increase with the safety factor at the edge, q95. Thus, there is a significant poloidal asymmetry in the impurity density in the H-mode edge region, which increases with q95. Therefore, the impurity transport in the H-mode edge is highly two-dimensional. The strong poloidal asymmetries measured show some quantitative agreement with theories developed to explain poloidal impurity asymmetries. However, none of the theories are strictly applicable to the Alcator C-Mod edge, and they all significantly underestimate the actual asymmetries that we observe.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2004 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physics Briefs written by and published by . This book was released on 1992 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book INIS Atomindex written by and published by . This book was released on 1988 with total page 962 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Magnetic Fusion Technology written by Thomas J. Dolan and published by Springer Science & Business Media. This book was released on 2014-02-10 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic Fusion Technology describes the technologies that are required for successful development of nuclear fusion power plants using strong magnetic fields. These technologies include: • magnet systems, • plasma heating systems, • control systems, • energy conversion systems, • advanced materials development, • vacuum systems, • cryogenic systems, • plasma diagnostics, • safety systems, and • power plant design studies. Magnetic Fusion Technology will be useful to students and to specialists working in energy research.
Download or read book Plasma Science written by National Academies of Sciences Engineering and Medicine and published by . This book was released on 2021-02-28 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Science and Engineering transforms fundamental scientific research into powerful societal applications, from materials processing and healthcare to forecasting space weather. Plasma Science: Enabling Technology, Sustainability, Security and Exploration discusses the importance of plasma research, identifies important grand challenges for the next decade, and makes recommendations on funding and workforce. This publication will help federal agencies, policymakers, and academic leadership understand the importance of plasma research and make informed decisions about plasma science funding, workforce, and research directions.
Download or read book The Radon Transform written by Sigurdur Helgason and published by Springer Science & Business Media. This book was released on 1999-08-01 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Radon transform is an important topic in integral geometry which deals with the problem of expressing a function on a manifold in terms of its integrals over certain submanifolds. Solutions to such problems have a wide range of applications, namely to partial differential equations, group representations, X-ray technology, nuclear magnetic resonance scanning, and tomography. This second edition, significantly expanded and updated, presents new material taking into account some of the progress made in the field since 1980. Aimed at beginning graduate students, this monograph will be useful in the classroom or as a resource for self-study. Readers will find here an accessible introduction to Radon transform theory, an elegant topic in integral geometry.
Download or read book Principles of Plasma Diagnostics written by I. H. Hutchinson and published by Cambridge University Press. This book was released on 2005-07-14 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic introduction to the physics of plasma diagnostics measurements. It develops from first principles the concepts needed to plan, execute and interpret plasma measurements, making it a suitable book for graduate students and professionals with little plasma physics background. The book will also be a valuable reference for seasoned plasma physicists, both experimental and theoretical, as well as those with an interest in space and astrophysical applications. This second edition is thoroughly revised and updated, with new sections and chapters covering recent developments in the field.
Download or read book Plasma Confinement written by R. D. Hazeltine and published by Courier Corporation. This book was released on 2013-02-20 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graduate-level text examines the essential physics underlying international research in magnetic confinement fusion with accounts of fundamental concepts behind methods of confining plasma at or near thermonuclear conditions. 1992 edition.
Download or read book Nuclear Fusion written by C.M. Braams and published by CRC Press. This book was released on 2002-06-20 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fusion research started over half a century ago. Although the task remains unfinished, the end of the road could be in sight if society makes the right decisions. Nuclear Fusion: Half a Century of Magnetic Confinement Fusion Research is a careful, scholarly account of the course of fusion energy research over the past fifty years. The authors outline the different paths followed by fusion research from initial ignorance to present understanding. They explore why a particular scheme would not work and why it was more profitable to concentrate on the mainstream tokamak development. The book features descriptive sections, in-depth explanations of certain physical and technical issues, scientific terms, and an extensive glossary that explains relevant abbreviations and acronyms.
Download or read book Plasma Physics written by Alexander Piel and published by Springer. This book was released on 2018-05-18 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: The enlarged new edition of this textbook provides a comprehensive introduction to the basic processes in plasmas and demonstrates that the same fundamental concepts describe cold gas-discharge plasmas, space plasmas, and hot fusion plasmas. Starting from particle drifts in magnetic fields, the principles of magnetic confinement fusion are explained and compared with laser fusion. Collective processes are discussed in terms of plasma waves and instabilities. The concepts of plasma description by magnetohydrodynamics, kinetic theory, and particle simulation are stepwise introduced. Space charge effects in sheath regions, double layers and plasma diodes are given the necessary attention. The novel fundamental mechanisms of dusty plasmas are explored and integrated into the framework of conventional plasmas. The book concludes with a concise description of modern plasma discharges. Written by an internationally renowned researcher in experimental plasma physics, the text keeps the mathematical apparatus simple and emphasizes the underlying concepts. The guidelines of plasma physics are illustrated by a host of practical examples, preferentially from plasma diagnostics. There, Langmuir probe methods, laser interferometry, ionospheric sounding, Faraday rotation, and diagnostics of dusty plasmas are discussed. Though primarily addressing students in plasma physics, the book is easily accessible for researchers in neighboring disciplines, such as space science, astrophysics, material science, applied physics, and electrical engineering. This second edition has been thoroughly revised and contains substantially enlarged chapters on plasma diagnostics, dusty plasmas and plasma discharges. Probe techniques have been rearranged into basic theory and a host of practical examples for probe techniques in dc, rf, and space plasmas. New topics in dusty plasmas, such as plasma crystals, Yukawa balls, phase transitions and attractive forces have been adopted. The chapter on plasma discharges now contains a new section on conventional and high-power impulse magnetron sputtering. The recently discovered electrical asymmetry effect in capacitive rf-discharges is described. The text is based on an introductory course to plasma physics and advanced courses in plasma diagnostics, dusty plasmas, and plasma waves, which the author has taught at Kiel University for three decades. The pedagogical approach combines detailed explanations, a large number of illustrative figures, short summaries of the basics at the end of each chapter, and a selection of problems with detailed solutions.
Download or read book Nuclear Fusion written by Edward Morse and published by Springer. This book was released on 2018-10-15 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: The pursuit of nuclear fusion as an energy source requires a broad knowledge of several disciplines. These include plasma physics, atomic physics, electromagnetics, materials science, computational modeling, superconducting magnet technology, accelerators, lasers, and health physics. Nuclear Fusion distills and combines these disparate subjects to create a concise and coherent foundation to both fusion science and technology. It examines all aspects of physics and technology underlying the major magnetic and inertial confinement approaches to developing nuclear fusion energy. It further chronicles latest developments in the field, and reflects the multi-faceted nature of fusion research, preparing advanced undergraduate and graduate students in physics and engineering to launch into successful and diverse fusion-related research. Nuclear Fusion reflects Dr. Morse’s research in both magnetic and inertial confinement fusion, working with the world’s top laboratories, and embodies his extensive thirty-five year career in teaching three courses in fusion plasma physics and fusion technology at University of California, Berkeley.
Download or read book On the Edge of Magnetic Fusion Devices written by Sergei Krasheninnikov and published by Springer. This book was released on 2021-09-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the current state of understanding concerning edge plasma, which bridges hot fusion plasma, with a temperature of roughly one million degrees Kelvin with plasma-facing materials, which have melting points of only a few thousand degrees Kelvin. In a fact, edge plasma is one of the keys to solution for harnessing fusion energy in magnetic fusion devices. The physics governing the processes at work in the edge plasma involves classical and anomalous transport of multispecies plasma, neutral gas dynamics, atomic physics effects, radiation transport, plasma-material interactions, and even the transport of plasma species within the plasma-facing materials. The book starts with simple physical models, then moves on to rigorous theoretical considerations and state-of-the-art simulation tools that are capable of capturing the most important features of the edge plasma phenomena. The authors compare the conclusions arising from the theoretical and computational analysis with the available experimental data. They also discuss the remaining gaps in their models and make projections for phenomena related to edge plasma in magnetic fusion reactors.
Download or read book The Fairy Tale of Nuclear Fusion written by L. J. Reinders and published by Springer Nature. This book was released on 2021-05-20 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This carefully researched book presents facts and arguments showing, beyond a doubt, that nuclear fusion power will not be technically feasible in time to satisfy the world's urgent need for climate-neutral energy. The author describes the 70-year history of nuclear fusion; the vain attempts to construct an energy-generating nuclear fusion power reactor, and shows that even in the most optimistic scenario nuclear fusion, in spite of the claims of its proponents, will not be able to make a sizable contribution to the energy mix in this century, whatever the outcome of ITER. This implies that fusion power will not be a factor in combating climate change, and that the race to save the climate with carbon-free energy will have been won or lost long before the first nuclear fusion power station comes on line. Aimed at the general public as well as those whose decisions directly affect energy policy, this book will be a valuable resource for informing future debates.
Download or read book Fundamentals of Magnetic Thermonuclear Reactor Design written by Vasilij A. Glukhikh and published by Woodhead Publishing. This book was released on 2018-05-21 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Magnetic Thermonuclear Reactor Design is a comprehensive resource on fusion technology and energy systems written by renowned scientists and engineers from the Russian nuclear industry. It brings together a wealth of invaluable experience and knowledge on controlled thermonuclear fusion (CTF) facilities with magnetic plasma confinement – from the first semi-commercial tokamak T-3, to the multi-billion international experimental thermonuclear reactor ITER, now in construction in France. As the INTOR and ITER projects have made an immense contribution in the past few decades, this book focuses on its practical engineering aspects and the basics of technical physics and electrical engineering. Users will gain an understanding of the key ratios between plasma and technical parameters, design streamlining algorithms and engineering solutions. - Written by a team of qualified experts who have been involved in the design of thermonuclear reactors for over 50 years - Outlines the most important features of the ITER project in France which is building the largest tokamak, including the design, material selection, safety and economic considerations - Includes data on how to design magnetic fusion reactors using CAD tools, along with relevant regulatory documents
Download or read book Tokamak Engineering Mechanics written by Yuntao Song and published by Springer Science & Business Media. This book was released on 2013-09-20 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tokamak Engineering Mechanics offers concise and thorough coverage of engineering mechanics theory and application for tokamaks, and the material is reinforced by numerous examples. Chapter topics include general principles, static mechanics, dynamic mechanics, thermal fluid mechanics and multiphysics structural mechanics of tokamak structure analysis. The theoretical principle of the design and the methods of the analysis for various components and load conditions are presented, while the latest engineering technologies are also introduced. The book will provide readers involved in the study of mechanical/fusion engineering with a general understanding of tokamak engineering mechanics. Yuntao Song is Head of the Tokamak Design Division at the Institute of Plasma Physics, Chinese Academic of Science (ASIPP), China.
