Download or read book Titanium Powder Metallurgy written by Ma Qian and published by Butterworth-Heinemann. This book was released on 2015-02-10 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium Powder Metallurgy contains the most comprehensive and authoritative information for, and understanding of, all key issues of titanium powder metallurgy (Ti PM). It summarizes the past, reviews the present and discusses the future of the science and technology of Ti PM while providing the world titanium community with a unique and comprehensive book covering all important aspects of titanium powder metallurgy, including powder production, powder processing, green shape formation, consolidation, property evaluation, current industrial applications and future developments. It documents the fundamental understanding and technological developments achieved since 1937 and demonstrates why powder metallurgy now offers a cost-effective approach to the near net or net shape fabrication of titanium, titanium alloys and titanium metal matrix composites for a wide variety of industrial applications. - Provides a comprehensive and in-depth treatment of the science, technology and industrial practice of titanium powder metallurgy - Each chapter is delivered by the most knowledgeable expert on the topic, half from industry and half from academia, including several pioneers in the field, representing our current knowledge base of Ti PM. - Includes a critical review of the current key fundamental and technical issues of Ti PM. - Fills a critical knowledge gap in powder metal science and engineering and in the manufacture of titanium metal and alloys
Download or read book Powder Metallurgy of Titanium written by Ma Qian and published by Trans Tech Publications Ltd. This book was released on 2012-08-24 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder Processing, Consolidation and Metallurgy of Titanium Selected, peer reviewed papers from the Symposium on Powder Processing and Metallurgy of Titanium, December 4-7, 2011, Brisbane, Australia
Download or read book Additive Manufacturing of Titanium Alloys written by Bhaskar Dutta and published by Butterworth-Heinemann. This book was released on 2016-06-17 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing of Titanium Alloys: State of the Art, Challenges and Opportunities provides alternative methods to the conventional approach for the fabrication of the majority of titanium components produced via the cast and wrought technique, a process which involves a considerable amount of expensive machining. In contrast, the Additive Manufacturing (AM) approach allows very close to final part configuration to be directly fabricated minimizing machining cost, while achieving mechanical properties at least at cast and wrought levels. In addition, the book offers the benefit of significant savings through better material utilization for parts with high buy-to-fly ratios (ratio of initial stock mass to final part mass before and after manufacturing). As titanium additive manufacturing has attracted considerable attention from both academicians and technologists, and has already led to many applications in aerospace and terrestrial systems, as well as in the medical industry, this book explores the unique shape making capabilities and attractive mechanical properties which make titanium an ideal material for the additive manufacturing industry. - Includes coverage of the fundamentals of microstructural evolution in titanium alloys - Introduces readers to the various Additive Manufacturing Technologies, such as Powder Bed Fusion (PBF) and Directed Energy Deposition (DED) - Looks at the future of Titanium Additive Manufacturing - Provides a complete review of the science, technology, and applications of Titanium Additive Manufacturing (AM)
Download or read book Powder Injection Molding written by Randall M. German and published by . This book was released on 2003 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Powder Metallurgy written by Isaac Chang and published by Elsevier. This book was released on 2013-08-31 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder metallurgy (PM) is a popular metal forming technology used to produce dense and precision components. Different powder and component forming routes can be used to create an end product with specific properties for a particular application or industry. Advances in powder metallurgy explores a range of materials and techniques used for powder metallurgy and the use of this technology across a variety of application areas.Part one discusses the forming and shaping of metal powders and includes chapters on atomisation techniques, electrolysis and plasma synthesis of metallic nanopowders. Part two goes on to highlight specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys. Part three reviews the manufacture and densification of PM components and explores joining techniques, process optimisation in powder component manufacturing and non-destructive evaluation of PM parts. Finally, part four focusses on the applications of PM in the automotive industry and the use of PM in the production of cutting tools and biomaterials.Advances in powder metallurgy is a standard reference for structural engineers and component manufacturers in the metal forming industry, professionals working in industries that use PM components and academics with a research interest in the field. - Discusses the forming and shaping of metal powders and includes chapters on atomisation techniques - Highlights specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys - Reviews the manufacture and densification of PM components and explores joining techniques
Download or read book Titanium Alloys written by Maciej Motyka and published by BoD – Books on Demand. This book was released on 2019-11-27 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.
Download or read book Extractive Metallurgy of Titanium written by Zhigang Zak Fang and published by Elsevier. This book was released on 2019-11-08 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extractive Metallurgy of Titanium: Conventional and Recent Advances in Extraction and Production of Titanium Metal contains information on current and developing processes for the production of titanium. The methods for producing Ti metal are grouped into two categories, including the reduction of TiCl4 and the reduction of TiO2, with their processes classified as either electrochemical or thermochemical. Descriptions of each method or process include both the fundamental principles of the method and the engineering challenges in their practice. In addition, a review of the chemical and physical characteristics of the product produced by each method is included. Sections cover the purity of titanium metal produced based on ASTM and other industry standards, energy consumption, cost and the potential environmental impacts of the processes. - Provides information on new and developing low cost, high integrity methods for titanium metal production - Discusses new markets for titanium due to the decreased cost of newly developed processes - Covers specific information on new methods, including the chemical and physical characteristics produced
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium Physical Metallurgy Processing and Applications written by F.H. Froes and published by ASM International. This book was released on 2015-02-01 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book covers all aspects of the history, physical metallurgy, corrosion behavior, cost factors and current and potential uses of titanium. The history of titanium is traced from its early beginnings through the work of Kroll, to the present day broadening market place. Extensive detail on extraction processes is discussed, as well as the various beta to alpha transformations and details of the powder metallurgy techniques.
Download or read book AMI Light Metals Conference 2014 written by Heinrich Möller and published by Trans Tech Publications Ltd. This book was released on 2014-10-20 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the AMI Light Metals 2014 Conference, October 15-17, 2014, Pilanesberg National Park, South Africa
Download or read book Advances in powder metallurgy written by F.H. Froes and published by Elsevier Inc. Chapters. This book was released on 2013-08-31 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major reason that there is not more widespread use of titanium and its alloys is the high cost. In this paper, developments in one cost effective approach to fabrication of titanium components – powder metallurgy – is discussed with respect to various aspects of this technology. These aspects are the blended elemental approach, prealloyed techniques, additive layer manufacturing, metal injection molding, spray deposition, far from equilibrium processing (rapid solidification mechanical alloying and vapor deposition) and porous materials. Use of titanium powder for sputtering targets, coating, as a grain refiner in aluminium alloys and fireworks are not addressed.
Download or read book Government Reports Announcements written by and published by . This book was released on 1975-10-17 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book TMS 2014 143rd Annual Meeting Exhibition Annual Meeting Supplemental Proceedings written by The Minerals, Metals & Materials Society (TMS) and published by Springer. This book was released on 2016-12-16 with total page 1152 pages. Available in PDF, EPUB and Kindle. Book excerpt: These papers present advancements in all aspects of high temperature electrochemistry, from the fundamental to the empirical and from the theoretical to the applied. Topics involving the application of electrochemistry to the nuclear fuel cycle, chemical sensors, energy storage, materials synthesis, refractory metals and their alloys, and alkali and alkaline earth metals are included. Also included are papers that discuss various technical, economic, and environmental issues associated with plant operations and industrial practices.
Download or read book Industrial Applications of Titanium and Zirconium written by R. T. Webster and published by ASTM International. This book was released on 1984 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Applications of Titanium and Zirconium Third Conference written by C. S. Young and published by ASTM International. This book was released on 1986 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Racing and High Performance Engines 1998 2003 written by Daniel J Holt and published by SAE International. This book was released on 2003-08-05 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 53 technical papers in this book show the improvements and design techniques that researchers have applied to performance and racing engines. They provide an insight into what the engineers consider to be the top improvements needed to advance engine technology; and cover subjects such as: 1) Direct injection; 2) Valve spring advancements; 3) Turbocharging; 4) Variable valve control; 5) Combustion evaluation; and 5) New racing engines.
Download or read book Machining of Titanium Alloys written by J. Paulo Davim and published by Springer. This book was released on 2014-07-05 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of examples illustrating the resent research advances in the machining of titanium alloys. These materials have excellent strength and fracture toughness as well as low density and good corrosion resistance; however, machinability is still poor due to their low thermal conductivity and high chemical reactivity with cutting tool materials. This book presents solutions to enhance machinability in titanium-based alloys and serves as a useful reference to professionals and researchers in aerospace, automotive and biomedical fields.
