Download or read book Strategic Decision Making in Modern Manufacturing written by Harinder Singh Jagdev and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strategic Decision Making in Modern Manufacturing introduces and explains the AMBIT (Advanced Manufacturing Business ImplemenTation) approach, which has been developed to bridge the gap between strategic management considerations and the operational effects of technology investment decisions on the manufacturing organisation, so that the likely impact of new manufacturing technology and/or programme implementations can be evaluated, anticipated and accurately predicted. The AMBIT approach focuses specifically on the non-financial aspects of such investment decisions and offers an approach that allows a manager, or more frequently a management team, to understand the impacts of a new technology or a new programme on the manufacturing organisation in terms of manufacturing performance.

Download or read book Enterprise Interoperability written by Matthieu Lauras and published by John Wiley & Sons. This book was released on 2015-01-05 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enterprises and organizations of any kind embedded in today's economic environment are deeply dependent on their ability to take part in collaborations. Consequently, it is strongly required for them to get actively involved for their own benefit in emerging, potentially opportunistic collaborative enterprise networks. The concept of “interoperability” has been defined by INTEROP-VLab as “The ability of an enterprise system or application to interact with others at a low cost in a flexible approach”. Consequently, interoperability of organizations appears as a major issue to succeed in building on the fly emerging enterprise networks. The International Conference on Interoperability for Enterprise Systems and Applications (I-ESA 2014) was held under the motto “interoperability for agility, resilience and plasticity of collaborations” on March 26-28, 2014 and organized by the Ecole des Mines d’Albi-Carmaux, France on behalf of the European Laboratory for Enterprise Interoperability (INTEROP-VLab). On March 24-25, co-located with the conference eight workshops and one doctoral symposium were held in four tracks complementing the program of the I-ESA’14 conference. The workshops and the doctoral symposium address areas of greatest current activity focusing on active discussions among the leading researchers in the area of Enterprise Interoperability. This part of the conference helps the community to operate effectively, building co-operative and supportive international links as well as providing new knowledge of on-going research to practitioners. The workshops and doctoral symposium aimed at exploiting new issues, challenges and solutions for Enterprise Interoperability (EI) and associated domains of innovation such as Smart Industry, Internet-Of-Things, Factories of the Future, EI Applications and Standardisation. These proceedings include the short papers from the I-ESA’14 workshops and the doctoral symposium. The book is split up into 9 sections, one for each workshop and one for the doctoral symposium. All sections were organized following four tracks: (1) EI and Future Internet / Factory of the Future; (2) EI Application Domains and IT; (3) EI Standards; (4) EI Doctoral Symposium. For each section, a workshop report is provided summarizing the content and the issues discussed during the sessions. The goal of the first track was to offer a discussion opportunity on interoperability issues regarding the use of Internet of Things on manufacturing environment (Workshops 1 and 3) on one hand, and regarding the potential of innovation derived from the use of digital methods, architectures and services such as Smart Networks (Workshops 2 and 4) on the other hand. The second track focused on particular application domains that are looking for innovative solutions to support their strong collaborative needs. Thus, the track developed one workshop on the use of EI solution for Future City-Logistics (Workshop 5) and one on the use of EI solutions for Crisis / Disaster Management (Workshop 6). The third track studied the recent developments in EI standardization. Two workshops were dedicated to this issue. The first one has proposed to focus on the management of standardization (Workshop 8) and the second one has chosen to work on the new knowledge on standardization developments in the manufacturing service domain (Workshop 9). The last track, the doctoral symposium presented research results from selected dissertations. The session discussed EI knowledge issues, notably in terms of gathering through social networks or Internet of Things and of exploitation through innovative decision support systems.

Download or read book Handbook of Life Cycle Engineering written by Arturo Molina and published by Springer Science & Business Media. This book was released on 1999-01-31 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook focuses on a series of concepts, models and technologies which can be used to improve current practice in life cycle engineering in manufacturing companies around the world. Experts on the main issues relating to life cycle engineering have produced a superb collection of chapters. All the contributing authors are researchers and engineers in the fields of manufacturing paradigms, enterprise integration, product life cycle and technologies for life cycle engineering. Academics and researchers will find this book to be a valuable reference tool. The book illustrates those key factors that ensure successful enterprise and product life cycle integration. Due to the book being developed as a joint industry and university project, its approach should be helpful to both practising professionals and academics. An overview of life cycle engineering concepts, models, methodologies and practices that have been proved to significantly improve the integration and productivity of manufacturing companies have been clearly explained in this handbook. This book will be essential for engineers, designers, product support personnel dealing with enterprise engineering projects. It will also be of immense use to lecturers and senior lecturers working in the fields of enterprise integration, product development, concurrent engineering and integrated manufacturing systems.

Download or read book Benchmarking Theory and Practice written by Asbjørn Rolstadås and published by Springer. This book was released on 2013-06-05 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lecturers and researchers in the areas of industrial engineering, quality management and business development, and middle and higher management in business or technology- oriented positions, will find this book invaluable.

Download or read book Handbook on Enterprise Architecture written by Peter Bernus and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is about methods, tools and examples of how to architect an enterprise through considering all life cycle aspects of Enterprise Entities. It is based on ISO15704:2000, or the GERAM Framework. A wide audience is addressed, as the handbook covers methods and tools necessary to design or redesign enterprises, as well as those necessary to structure the implementation into manageable projects.

Download or read book Metrics and Models for Evaluating the Quality and Effectiveness of ERP Software written by Muketha, Geoffrey Muchiri and published by IGI Global. This book was released on 2019-07-26 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enterprise resource planning (ERP) is a class of integrated software that uses software technologies to implement real-time management of business processes in an organization. ERPs normally cut across organizations, making them large and complex. Software researchers have for many years established that complexity affects software quality negatively and must therefore be controlled with novel metrics and models of evaluation that can determine when the software is at acceptable levels of quality and when not. Metrics and Models for Evaluating the Quality and Effectiveness of ERP Software is a critical scholarly publication that examines ERP development, performance, and challenges in business settings to help improve decision making in organizations that have embraced ERPs, improve the efficiency and effectiveness of their activities, and improve their return on investments (ROI). Highlighting a wide range of topics such as data mining, higher education, and security, this book is essential for professionals, software developers, researchers, academicians, and security professionals.

Download or read book Enterprise Interoperability X written by Raúl Rodríguez-Rodríguez and published by Springer Nature. This book was released on with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Collaborative Systems for Smart Networked Environments written by Luis M. Camarinha-Matos and published by Springer. This book was released on 2014-10-01 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 15th IFIP WG 5.5 Working Conference on Virtual Enterprises, PRO-VE 2014, held in Amsterdam, The Netherlands, in October 2014. The 73 revised papers were carefully selected from 190 submissions. They provide a comprehensive overview of identified challenges and recent advances in various collaborative network (CN) domains and their applications, with a particular focus on the following areas in support of smart networked environments: behavior and coordination; product-service systems; service orientation in collaborative networks; engineering and implementation of collaborative networks; cyber-physical systems; business strategies alignment; innovation networks; sustainability and trust; reference and conceptual models; collaboration platforms; virtual reality and simulation; interoperability and integration; performance management frameworks; performance management systems; risk analysis; optimization in collaborative networks; knowledge management in networks; health and care networks; and mobility and logistics.

Download or read book Advances in Production Management Systems Competitive Manufacturing for Innovative Products and Services written by Christos Emmanouilidis and published by Springer. This book was released on 2013-08-13 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two volumes IFIP AICT 397 and 398 constitute the thoroughly refereed post-conference proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2012, held in Rhodes, Greece, in September 2012. The 182 revised full papers were carefully reviewed and selected for inclusion in the two volumes. They are organized in 6 parts: sustainability; design, manufacturing and production management; human factors, learning and innovation; ICT and emerging technologies in production management; product and asset lifecycle management; and services, supply chains and operations.

Download or read book Human Factors in Organizational Design and Management VI written by P. Vink and published by Elsevier. This book was released on 1998-08-14 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a series of papers that were presented during the Sixth IEA International Symposium on Human Factors in Organizational Design and Management (ODAM '98). The Symposium was sponsored jointly by the International Ergonomics Society, the Dutch Ergonomics Society, NIA TNO and The Ministry of Social Affairs and Employment. These experiences include new ideas, research results, tools, and applications of human-organization interface technology to improving work systems. New technology, changing work force demographics, changing attitudes and values about work and what constitutes real quality of work life, have heightened the need for a true systems approach to optimizing the interfaces between humans, technology and organizational structures and processes. Growing world competition, and the related need to make organizations more productive and efficient, have further intensified this need to improve work systems. This need is reflected in the rapid development of macroergonomics methods and applications since the first of these ODAM Symposia in 1984. What then was recognized by only a few researchers and practitioners has now become a widely accepted part of the human factors/ergonomics discipline. As demonstrated by the papers contained herein, application of macroergonomics is having a very real positive impact on sociotechnical systems internationally. Included in this volume are a broad selection of papers on theory, methodology, tools, research findings, and case studies from leading professionals throughout the world. This volume thus provides the reader with some of the latest developments in human-organization interface technology. Collectively, these papers should provide the reader with a good conceptual understanding of the ergonomic approach to work system design, and of its tremendous potential for improving work systems and the human condition in all cultures.

Download or read book Information Control Problems in Manufacturing 2006 written by Alexandre Dolgui and published by Elsevier. This book was released on 2011-10-10 with total page 839 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information Control Problems in Manufacturing 2006 contains the Proceedings of the 12th IFAC Symposium on Information Control Problems in Manufacturing (INCOM'2006). This symposium took place in Saint Etienne, France, on May 17-19 2006. INCOM is a tri-annual event of symposia series organized by IFAC and it is promoted by the IFAC Technical Committee on Manufacturing Plant Control. The purpose of the symposium INCOM'2006 was to offer a forum to present the state-of-the-art in international research and development work, with special emphasis on the applications of optimisation methods, automation and IT technologies in the control of manufacturing plants and the entire supply chain within the enterprise. The symposium stressed the scientific challenges and issues, covering the whole product and processes life cycle, from the design through the manufacturing and maintenance, to the distribution and service. INCOM'2006 Technical Program also included a special event on Innovative Engineering Techniques in Healthcare Delivery. The application of engineering and IT methods in medicine is a rapidly growing field with many opportunities for innovation. The Proceedings are composed of 3 volumes: Volume 1 - Information Systems, Control & Interoperability Volume 2 - Industrial Engineering Volume 3 - Operational Research * 3-volume set, containing 362 carefully reviewed and selected papers * presenting the state-of-the-art in international research and development in Information Control problems in Manufacturing

Download or read book Human Aspects in Computer Integrated Manufacturing written by G.J. Olling and published by Elsevier. This book was released on 2013-10-22 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume reflect the current research and development of advanced manufacturing software. They may be categorized as follows: New Concepts towards CIM, Product Realization through Product/Process Modelling, Intelligent Management and Control of Manufacturing Activities, and Development of CIM Systems.

Download or read book Quality Reliability and Maintenance 2004 written by G. J. McNulty and published by John Wiley & Sons. This book was released on 2004-05-21 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers included in this volume were presented at the 5th international conference on Quality, Reliability and Maintenance which took place at the University of Oxford in April 2004. They highlight the importance of the QRM disciplines and represent the latest developments, trends and progress, and are essential reference material for all reasearch academics, quality planners, maintenance executives and personnel who have the responsibility to implement the findings of quality audits and maintenance policy. Quality, Reliabilty, and Maintenance - be it in industry, commerce, education, or academia - influences and guides every contemporary aspect of our lives. This collection of papers includes topics such as: Quality Analysis Condition Monitoring Maintenance Management Computer Applications Education and Training Research Applications

Download or read book Optimization Models and Concepts in Production Management written by Bradimaarte and published by CRC Press. This book was released on 1995-04-13 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimization techniques in production management are becoming increasingly important for efficient and competitive manufacturing. This book presents a collection of tutorial papers by outstanding researchers on the application of optimization concepts. Topics introduced include hierarchical production planning and large scale scheduling, optimal production control, exact and heuristic algorithms for production scheduling and stochastic modelling.

Download or read book Advanced Information Technologies for Industrial Material Flow Systems written by Shimon Y. Nof and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 707 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the results of an Advanced Research Workshop that took place in Grenoble, France, in June 1988. The objective of this NATO ARW on Advanced Information Technologies for Industrial Material Flow Systems (MFS) was to bring together eminent research professionals from academia, industry and government who specialize in the study and application of information technology for material flow contro!' The current world status was reviewed and an agenda for needed research was discussed and established. The workshop focused on the following subjects: The nature of information within the material flow domain. Status of contemporary databases for engineering and material flow. Distributed databases and information integration. Artificial intelligence techniques and models for material flow problem solving. Digital communications for material flow systems. Robotics, intelligent systems, and material flow contro!' Material handling and storage systems information and contro!' Implementation, organization, and economic research-issues as related to the above. Material flow control is as important as manufacturing and other process control in the computer integrated environment. Important developments have been occurring internationally in information technology, robotics, artificial intelligence and their application in material flow/material handling systems. In a traditional sense, material flow in manufacturing (and other industrial operations) consists of the independent movement of work-in-process between processing entities in order to fulfill the requirements of the appropriate production and process plans. Generally, information, in this environment, has been communicated from processors to movers.

Download or read book Architectures for Enterprise Integration written by Peter Bernus and published by Springer. This book was released on 2013-04-17 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: Architectures for Enterprise Integration describes the latest methods to guide enterprises and consultants, managers and technical personnel through a complete life-cycle of enterprise development. This book is based on the findings of the IFIP/IFAC Task Force and presents the state-of-the-art in enterprise architecture. This book is essential reading for all practising engineers and researchers in manufacturing and engineering management with special interest for those involved in CIM and Enterprise Modelling and Integration.

Download or read book Advances in Production Management Systems Innovative and Knowledge Based Production Management in a Global Local World written by Bernard Grabot and published by Springer. This book was released on 2014-08-26 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three volumes IFIP AICT 438, 439, and 440 constitute the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2014, held in Ajaccio, France, in September 2014. The 233 revised full papers were carefully reviewed and selected from 271 submissions. They are organized in 6 parts: knowledge discovery and sharing; knowledge-based planning and scheduling; knowledge-based sustainability; knowledge-based services; knowledge-based performance improvement, and case studies.