Download or read book Earthquake Resistant Engineering Structures VIII written by C. A. Brebbia and published by WIT Press. This book was released on 2011 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to protect the built environment in earthquake-prone regions of the world It is important to retrofit and rehabilitate existing structures and infrastructure, as well as to ensure the optimal design and construction of new facilities. The high stakes in human life and property in urban densely populated urban areas has been driving research on advances in this field. These advances are presented biennially at a conference organized by the Wessex Institute of Technology. This book contains the papers from the latest conference in the series, which began in 1991. The papers cover Geographical and geotechnical engineering; Seismic hazard and vulnerability; Seismic isolation and energy dissipation; Structural dynamics; Building performance during earthquakes; Retrofitting; Lifelines; Material mechanics and characterisation; Nonlinear numerical analysis; Performance based design; Experimental studies; Safety and security; and Innovative technologies.
Download or read book Earthquake Resistant Engineering Structures X written by C.A. Brebbia and published by WIT Press. This book was released on 2015-09-15 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing the latest research on preparation for and mitigation of future earthquakes, this book addresses an area of increasing importance to many areas around the world. It contains research presented at the ninth and latest in a series of biennial conferences on the topic organised by the Wessex Institute. As world population has concentrated in urban areas, we have seen the consequences of natural disasters take an ever higher toll in human life and property. Adding to this trend, earthquake activity is being registered in areas that were not previously very active, thus the need for research into the application of technological advances to the specific area of earthquake engineering. This volume presents those advances. The papers cover Seismic Isolation and Energy Dissipation; Building Performance During Earthquakes; Nonlinear Numerical Analysis; Performance Based Design; Experimental Studies; Seismic Hazard Evaluation and Microzoning for Structural Design; Seismic Hazard Assessment; Case Studies.
Download or read book Earthquake Resistant Engineering Structures VI written by C. A. Brebbia and published by WIT Press. This book was released on 2007 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problem of protecting the built environment in earthquake-prone regions of the world involves not only the optimal design and construction of new facilities, but also the upgrading and rehabilitation of existing structures and infrastructures. The latter is a laborious and expensive task, which can be accomplished only gradually. However, the inestimable loss of life and the colossal costs following a major earthquake in a metropolitan area provide sufficient reason to make it an important challenge for the scientific and technical community.Containing papers presented at the Sixth International Conference on Earthquake Resistance and Engineering Structures, this book will be invaluable to engineers, scientists and managers working in industry, academia, research organizations and governments. The book encompasses a wide range of topics such as: Site Effects and Geotechnical aspects; Earthquake resistant design; Seismic Behaviour and Vulnerability; Structural Dynamics; Monitoring and Testing; Bridges; Heritage Buildings; Masonry Construction; Retrofitting; Passive Protection Devices and Seismic Isolation; Lifelines; Design Codes and Response Spectre.
Download or read book Earthquake Resistant Engineering Structures VII written by M. Phocas and published by WIT Press. This book was released on 2009-04-23 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the proceedings of the Seventh International Conference on Earthquake Resistant Engineering Structures (ERES), this book presents basic and applied research in the main fields of engineering relevant to earthquake resistant analysis and design of structural systems.
Download or read book Earthquake Resistant Engineering Structures IX written by C. A. Brebbia and published by WIT Press. This book was released on 2013-07-08 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: In earthquake-prone regions of the world it is important not only to ensure that new facilities meet optimal standards but also that existing structures and infrastructure be retrofitted and rehabilitated. As world populations concentrate in urban areas, the stakes in human life and property of such natural disasters as earthquakes becomes higher and higher. This has been driving research on advances in the field. These advances are presented biennially at a conference organised by the Wessex Institute of Technology.The advances presented at the ninth conference in the series, which began in 1991 are presented in this book. The papers cover Plates and other geological risks; Earthquake prediction; Microzoning; Remote sensing / Monitoring / Early warning systems; Seismic codes; Seismic hazard and vulnerability; Tsunamis; Seismic isolation and energy dissipation; Structural dynamics; Building performance during earthquakes; Retrofitting; Lifelines; Material mechanics and characterisation; Nonlinear numerical analysis; Performance based design; Experimental studies; Forensic analysis; Safety and security; Socio-economic issues; Insurance related issues; Innovative technologies; Case studies.
Download or read book Earthquake Resistant Engineering Structures XI written by C.A. Brebbia and published by WIT Press. This book was released on 2017-09-25 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: In its 11th year, and reporting on the latest research on preparation for and mitigation of future earthquakes, this volume examines an area of increasing importance to many countries around the world. ERES 2017 assembled experts from around the world to present their basic and applied research in the fields of earthquake engineering relevant to the design of structures. As the world’s population has concentrated in urban areas resulting in buildings in regions of high seismic vulnerability, we have seen the consequences of natural disasters take an ever higher toll on human existence. Protecting the built environment in earthquake-prone regions involves not only the optimal design and construction of new facilities, but also the upgrading and rehabilitation of existing structures including heritage buildings, which is an important area of research. Major earthquakes and associated effects, such as tsunamis, continue to stress the need to carry out more research and a better understanding of these phenomena is required to design earthquake resistant buildings and to carry out risk assessment and vulnerability studies. Some of the subject areas covered are: Seismic isolation and energy dissipation; Building performance during earthquakes; Numerical analysis; Performance based design; Experimental studies; Seismic hazards and tsunamis; Safety engineering; Liquefaction; Innovative technologies; Paraseismic devices and Lifelines and resilience.
Download or read book Earthquake Resistant Engineering Structures V written by C. A. Brebbia and published by WIT Press (UK). This book was released on 2005 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains over 70 papers from the fifth in the popular international conference series on the subject. A wide list of topics include: Geophysical and Geotechnical Aspects; Seismic Behaviour and Vulnerability; Structural Dynamics; Seismic Isolation and Control; Monitoring and Testing; Risk Reduction; and Earthquake-resistant Design.
Download or read book Earthquake Resistant Engineering Structures IV written by G. Latini and published by Witpress. This book was released on 2003 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the proceedings of the Fourth International Conference on Earthquake Resistant Engineering Structures (ERES), this title presents basic and applied research in the main fields of engineering relevant to earthquake resistant analysis and design of structural systems.
Download or read book Earthquake Design Practice for Buildings written by Edmund D. Booth and published by Thomas Telford. This book was released on 2006 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Talking about earthquake engineering, this second edition is intended for practising structural engineers, including those with little or no knowledge of the subject, and also for advanced engineering students. It discusses the provisions of seismic codes, particularly Eurocode 8.
Download or read book Earthquake Resistant Structures written by Mohiuddin Ali Khan and published by Butterworth-Heinemann. This book was released on 2013-03-18 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake engineering is the ultimate challenge for structural engineers. Even if natural phenomena involve great uncertainties, structural engineers need to design buildings, bridges, and dams capable of resisting the destructive forces produced by them. These disasters have created a new awareness about the disaster preparedness and mitigation. Before a building, utility system, or transportation structure is built, engineers spend a great deal of time analyzing those structures to make sure they will perform reliably under seismic and other loads. The purpose of this book is to provide structural engineers with tools and information to improve current building and bridge design and construction practices and enhance their sustainability during and after seismic events. In this book, Khan explains the latest theory, design applications and Code Provisions. Earthquake-Resistant Structures features seismic design and retrofitting techniques for low and high raise buildings, single and multi-span bridges, dams and nuclear facilities. The author also compares and contrasts various seismic resistant techniques in USA, Russia, Japan, Turkey, India, China, New Zealand, and Pakistan. Written by a world renowned author and educator Seismic design and retrofitting techniques for all structures Tools improve current building and bridge designs Latest methods for building earthquake-resistant structures Combines physical and geophysical science with structural engineering
Download or read book Earthquake Resistant Engineering Structures III written by C. A. Brebbia and published by WIT Press (UK). This book was released on 2001 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Third International Conference on Earthquake Resistant and Engineering Structures, ERES III"--P. facing t.p.
Download or read book Seismic Resistant Structures written by S. Ivorra and published by WIT Press. This book was released on 2018-03-28 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research studies on the preparation for and mitigation of future earthquakes, an area of increasing importance to many countries around the world, comprise this volume. The selected papers included in this book have been prepared by experts from around the world in the fields of earthquake engineering relevant to the design of structures. As the world’s population has concentrated in urban areas resulting in buildings in regions of high seismic vulnerability, we have seen the consequences of natural disasters take an ever higher toll on human existence. Protecting the built environment in earthquake-prone regions involves not only the optimal design and construction of new facilities, but also the upgrading and rehabilitation of existing structures including heritage buildings, which is an important area of research. Major earthquakes and associated effects, such as tsunamis, continue to stress the need to carry out more research and a better understanding of these phenomena is required to design earthquake resistant buildings and to carry out risk assessment and vulnerability studies.
Download or read book Earthquake Resistant Buildings written by M.Y.H. Bangash and published by Springer Science & Business Media. This book was released on 2011-08-19 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise work provides a general introduction to the design of buildings which must be resistant to the effect of earthquakes. A major part of this design involves the building structure which has a primary role in preventing serious damage or structural collapse. Much of the material presented in this book examines building structures. Due to the recent discovery of vertical components, it examines not only the resistance to lateral forces but also analyses the disastrous influence of vertical components. The work is written for Practicing Civil, Structural, and Mechanical Engineers, Seismologists and Geoscientists. It serves as a knowledge source for graduate students and their instructors.
Download or read book Seismic Design of Concrete Buildings to Eurocode 8 written by Michael Fardis and published by CRC Press. This book was released on 2015-02-04 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Original Source of Expressions and Tools for the Design of Concrete Elements with EurocodeSeismic design of concrete buildings needs to be performed to a strong and recognized standard. Eurocode 8 was introduced recently in the 30 countries belonging to CEN, as part of the suite of Structural Eurocodes, and it represents the first European Stand
Download or read book Seismic Isolation for Earthquake resistant Structures written by Petros Ioannis Komodromos and published by Advances in Earthquake Enginee. This book was released on 2000 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ground motion due to earthquake excitation often induces disastrous disturbances that severely damage structures and their contents. Conventional earthquake-resistant design focuses on the strengthening of structures to avoid collapse, while little attention is paid to the prevention of damage as it is almost impossible to construct completely earthquake proof structures at reasonable cost. This state-of-the-art volume explores seismic isolation as an alternative and performance-based design approach to minimise earthquake induced loads and resulting damage in low to medium-rise buildings. A discussion of the characteristics, advantages and limitations of seismic isolation is followed by a demonstration of its capability to decouple a structure from the damaging effects of ground acceleration. Describes currently used seismic isolation systems in detail. Evaluates the performance of seismically isolated structures and provides examples of their response under earthquake action. Proposes a preliminary design methodology for seismically isolated structures. Accessible to both students and practising structural engineers who need to familiarise themselves with this approach.
Download or read book Earthquake Resistant Design written by David J. Dowrick and published by Wiley-Blackwell. This book was released on 1987 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second edition of a book which has proved useful to large numbers of engineers and architects since it was first published.
Download or read book Earthquake Resistant Engineering Structures IV written by G. Latini and published by Witpress. This book was released on 2003 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the proceedings of the Fourth International Conference on Earthquake Resistant Engineering Structures (ERES), this title presents basic and applied research in the main fields of engineering relevant to earthquake resistant analysis and design of structural systems.