Download or read book Earthquake resistant Design Of Masonry Buildings written by Miha Tomazevic and published by World Scientific. This book was released on 1999-07-05 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last few decades, a considerable amount of experimental and analytical research on the seismic behaviour of masonry walls and buildings has been carried out. The investigations resulted in the development of methods for seismic analysis and design, as well as new technologies and construction systems. After many centuries of traditional use and decades of allowable stress design, clear concepts for limit state verification of masonry buildings under earthquake loading have recently been introduced in codes of practice.Although this book is not a review of the state-of-the-art of masonry structures in earthquake zones, an attempt has been made to balance the discussion on recent code requirements, state-of-the-art methods of earthquake-resistant design and the author's research work, in order to render the book useful for a broader application in design practice. An attempt has also been made to present, in a condensed but easy to understand way, all the information needed for earthquake-resistant design of masonry buildings constructed using traditional systems. The basic concepts of limit state verification are presented and equations for seismic resistance verification of masonry walls of all types of construction, (unreinforced, confined and reinforced) as well as masonry-infilled reinforced concrete frames, are addressed. A method for seismic resistance verification, compatible with recent code requirements, is also discussed. In all cases, experimental results are used to explain the proposed methods and equations.An important part of this book is dedicated to the discussion of the problems of repair, retrofit and rehabilitation of existing masonry buildings, including historical structures in urban centres. Methods of strengthening masonry walls as well as improving the structural integrity of existing buildings are described in detail. Wherever possible, experimental evidence regarding the effectiveness of the proposed strengthening methods is given.
Download or read book Earthquake resistant Confined Masonry Construction written by Svetlana Brzev and published by . This book was released on 2018 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masonry Construction in Active Seismic Regions written by Rajesh Rupakhety and published by Woodhead Publishing. This book was released on 2021-05-12 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: During earthquakes, masonry buildings are the most affected, and consequently, damage to these buildings leads to massive loss of life and property. Masonry buildings comprise probably the greatest share of overall housing stock, and in turn, understanding their performance during earthquakes is a pivotal problem in seismic regions. Masonry Construction in Active Seismic Regions presents details on the kinds of masonry building found in seismic regions of the world. The title describes interventions, such as retrofitted solutions, dynamic identification, and improved construction after earthquakes, that are equally applicable to regions of moderate and high seismicity. The book covers representative masonry buildings from active seismic regions, the material properties of masonry construction, numerical modelling techniques and computational advances, seismic performance of non-engineered masonry buildings, resilience in typical construction, retrofitting, and the cultural values and structural characterization of heritage masonry buildings in active seismic regions. This book is unique in its global and systematic coverage of masonry construction in seismic regions. - Identifies the material properties of masonry construction from a seismic perspective - Covers representative masonry buildings from active seismic regions, providing a benchmark to understand existing building stocks - Provides numerical modelling techniques and reviews computational advances, including a large test database - Details the seismic performance of non-engineered masonry buildings, as well as the cultural values and structural characterisation of heritage masonry constructions - Analyses typical or vernacular constructions which have earthquake resilient features, such as Dhajji-Dewari, Borbone, Pombalino, and Himis
Download or read book Earthquake Resistant Confined Masonary Construction written by Svetlana Brzev and published by . This book was released on 2007 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph is written for building professionals interested in learning more about confined masonry construction and for those who would like to promote its application in countries with high earthquake risk. Confined masonry has evolved over the last hundred years through an informal process based on its satisfactory performance in past earthquakes in countries and regions of extremely high seismic risk. It is used both for non-engineered and engineered construction; its field applications range from one- and two-storey single-family dwellings to six-storey apartment buildings.
Download or read book Guidelines for earthquake resistant non engineered construction written by Arya, Anand S and published by UNESCO. This book was released on 2014-08-25 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Earthquake Resistant Masonry Construction written by Robert A. Crist and published by . This book was released on 1977 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Constructing Low Rise Confined Masonry Buildings written by Tom Schacher and published by . This book was released on 2018-01-15 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In many of the most earthquake-prone areas of the world, low-rise houses, built by masons without formal training or self-built, are vulnerable to collapse. This guide focuses on the confined masonry technique which offers excellent results of earthquake resistance in countries where it is part of the building code. They have been developed by practitioners rather than by engineers, and therefore respond well to the technical and financial capacities of small-scale contractors and self-builders. Confined masonry uses the same materials as the widely used reinforced-concrete frame technique, but in a different sequence, making the system more simple and forgiving. Constructing Low-rise Confined Masonry Buildings describes these techniques with clear and concise instructions. Punctuated regularly with illustrations and photos throughout, this guide carefully describes basic rules for the selection of safe building sites and for house layouts, whilst giving detailed instructions on the construction process. Photos include examples to highlight both safe and unsafe practices paired with clear explanations. The guide gives indications on practical detailing of confined masonry but also includes basic information on good construction practice in general. This is an essential handbook for building technicians, construction managers, architects and students of architecture and civil engineering in areas regularly affected by earthquakes or for those following practical training on confined masonry building sites"--
Download or read book Seismic Design Manual 3rd Edition written by and published by . This book was released on 2018-07 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Earthquake Resistant Design of Masonry Buildings written by Tomazevic and published by . This book was released on 1999 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Earthquake Resistant Design of Structures written by Shashikant K. Duggal and published by OUP India. This book was released on 2013-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake-resistant Design of Structures 2e is designed for undergraduate students of civil engineering.
Download or read book Advances in Indian Earthquake Engineering and Seismology written by M. L. Sharma and published by Springer. This book was released on 2018-06-22 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume is an up-to-date guide for students, policy makers and engineers on earthquake engineering, including methods and technologies for seismic hazard detection and mitigation. The book was written in honour of the late Professor Jai Krishna, who was a pioneer in teaching and research in the field of earthquake engineering in India during his decades-long work at the University of Roorkee (now the Indian Institute of Technology Roorkee). The book comprehensively covers the historical development of earthquake engineering in India, and uses this background knowledge to address the need for current advances in earthquake engineering, especially in developing countries. After discussing the history and growth of earthquake engineering in India from the past 50 years, the book addresses the present status of earthquake engineering in regards to the seismic resistant designs of bridges, buildings, railways, and other infrastructures. Specific topics include response spectrum superposition methods, design philosophy, system identification approaches, retaining walls, and shallow foundations. Readers will learn about developments in earthquake engineering over the past 50 years, and how new methods and technologies can be applied towards seismic risk and hazard identification and mitigation.
Download or read book Advances in Structural Technologies written by Sondipon Adhikari and published by Springer Nature. This book was released on 2020-09-25 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the National Conference on Advances in Structural Technology (CoAST 2019). It brings together different applied and technological aspects of structural engineering. The main topics covered in this book include solid mechanics, composite structures, fluid-structure interaction, soil-structure interaction, structural safety, and structural health monitoring. The book also focuses on emerging structural materials and the different behavior of civil, mechanical, and aerospace structural systems. Given its contents, this book will be a useful reference for researchers and practitioners working in structural safety and engineering.
Download or read book Masonry Design written by M. Hatzinikolas and published by . This book was released on 2015 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seismic Design of RC Buildings written by Sharad Manohar and published by Springer. This book was released on 2015-09-09 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to serve as a textbook for engineering courses on earthquake resistant design. The book covers important attributes for seismic design such as material properties, damping, ductility, stiffness and strength. The subject coverage commences with simple concepts and proceeds right up to nonlinear analysis and push-over method for checking building adequacy. The book also provides an insight into the design of base isolators highlighting their merits and demerits. Apart from the theoretical approach to design of multi-storey buildings, the book highlights the care required in practical design and construction of various building components. It covers modal analysis in depth including the important missing mass method of analysis and tension shift in shear walls and beams. These have important bearing on reinforcement detailing. Detailed design and construction features are covered for earthquake resistant design of reinforced concrete as well as confined and reinforced masonry structures. The book also provides the methodology for assessment of seismic forces on basement walls and pile foundations. It provides a practical approach to design and detailing of soft storeys, short columns, vulnerable staircases and many other components. The book bridges the gap between design and construction. Plenty of worked illustrative examples are provided to aid learning. This book will be of value to upper undergraduate and graduate students taking courses on seismic design of structures.
Download or read book Masonry Structures written by Robert G. Drysdale and published by . This book was released on 1999 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seismic Design of Reinforced Concrete and Masonry Buildings written by Thomas Paulay and published by Wiley-Interscience. This book was released on 1992-04-10 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizes actual structural design, not analysis, of multistory buildings for seismic resistance. Strong emphasis is placed on specific detailing requirements for construction. Fundamental design principles are presented to create buildings that respond to a wide range of potential seismic forces, which are illustrated by numerous detailed examples. The discussion includes the design of reinforced concrete ductile frames, structural walls, dual systems, reinforced masonry structures, buildings with restricted ductility and foundation walls. In addition to the examples, full design calculations are given for three prototype structures.
Download or read book Between Two Earthquakes written by Sir Bernard M. Feilden and published by Getty Publications. This book was released on 1987-10-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook addresses three areas of concern for the museum administrator concerning the protection of historic buildings, monuments, and archaeological sites located in seismic areas. It proposes pre-disaster measures such as taking accurate and complete documentation (photogrammetry is discussed in one of the 13 appendixes), risk awareness, planning, maintenance and inspections, etc. Second, when an earthquake strikes, the immediate emergency steps necessary to protect life and property are indicated; and after the earthquake, the strengthening of valuable cultural property (based on the Modified Mercalli Intensity Scale, also in an appendix) should be included in the general program of prevention maintenance along with the repairs discussed in detail applicable to each architectural element, and to the site as a whole.
