Download or read book Earthquake Engineering for Concrete Dams written by Anil K. Chopra and published by John Wiley & Sons. This book was released on 2020-03-16 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to modern-day methods for earthquake engineering of concrete dams Earthquake analysis and design of concrete dams has progressed from static force methods based on seismic coefficients to modern procedures that are based on the dynamics of dam–water–foundation systems. Earthquake Engineering for Concrete Dams offers a comprehensive, integrated view of this progress over the last fifty years. The book offers an understanding of the limitations of the various methods of dynamic analysis used in practice and develops modern methods that overcome these limitations. This important book: Develops procedures for dynamic analysis of two-dimensional and three-dimensional models of concrete dams Identifies system parameters that influence their response Demonstrates the effects of dam–water–foundation interaction on earthquake response Identifies factors that must be included in earthquake analysis of concrete dams Examines design earthquakes as defined by various regulatory bodies and organizations Presents modern methods for establishing design spectra and selecting ground motions Illustrates application of dynamic analysis procedures to the design of new dams and safety evaluation of existing dams. Written for graduate students, researchers, and professional engineers, Earthquake Engineering for Concrete Dams offers a comprehensive view of the current procedures and methods for seismic analysis, design, and safety evaluation of concrete dams.
Download or read book Seismic Performance Analysis of Concrete Gravity Dams written by Gaohui Wang and published by Springer Nature. This book was released on 2020-07-10 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book evaluates the seismic performance of concrete gravity dams, considering the effects of strong motion duration, mainshock-aftershock seismic sequence, and near-fault ground motion. It employs both the extended finite element method (XFEM) and concrete damaged plasticity (CDP) models to characterize the mechanical behavior of concrete gravity dams under strong ground motions, including the dam-reservoir-foundation interaction. In addition, it discusses the effects of the initial crack, earthquake direction, and cross-stream seismic excitation on the nonlinear dynamic response to strong ground motions, and on the damage-cracking risk of concrete gravity dams. This book provides a theoretical basis for the seismic performance evaluation of high dams, and can also be used as a reference resource for researchers and graduate students engaged in the seismic design of high dams.
Download or read book Earthquake Engineering for Concrete Dams written by National Research Council and published by National Academies Press. This book was released on 1991-02-01 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: The hazard posed by large dams has long been known. Although no concrete dam has failed as a result of earthquake activity, there have been instances of significant damage. Concerns about the seismic safety of concrete dams have been growing recently because the population at risk in locations downstream of major dams continues to expand and because the seismic design concepts in use at the time most existing dams were built were inadequate. In this book, the committee evaluates current knowledge about the earthquake performance of concrete dams, including procedures for investigating the seismic safety of such structures. Earthquake Engineering for Concrete Dams specifically informs researchers about state-of-the-art earthquake analysis of concrete dams and identifies subject areas where additional knowledge is needed.
Download or read book Earthquake Analysis and Response of Concrete Gravity Dams written by Gregory L. Fenves and published by . This book was released on 1984 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonlinear Analysis in Soil Mechanics written by Wai-Fah Chen and published by Elsevier Science & Technology. This book was released on 1990 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardbound. With the present state of development of finite element computer software and high-speed digital computer hardware, an almost unlimited number of solutions to soil mechanics and soil structure interaction problems can now be obtained. These are not limited to linear elastic small deformation solid mechanics, but can be extended to include problems of various kinds involving material and geometric nonlinearities. This book is concerned with the development of numerical tools for solutions of nonlinear analysis problems in soil mechanics.
Download or read book Earthquake Analysis and Response of Concrete Gravity Dams Including Base Sliding written by Juan W. Chavez and published by . This book was released on 1994 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Scaled Boundary Finite Element Method written by Chongmin Song and published by John Wiley & Sons. This book was released on 2018-06-19 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: An informative look at the theory, computer implementation, and application of the scaled boundary finite element method This reliable resource, complete with MATLAB, is an easy-to-understand introduction to the fundamental principles of the scaled boundary finite element method. It establishes the theory of the scaled boundary finite element method systematically as a general numerical procedure, providing the reader with a sound knowledge to expand the applications of this method to a broader scope. The book also presents the applications of the scaled boundary finite element to illustrate its salient features and potentials. The Scaled Boundary Finite Element Method: Introduction to Theory and Implementation covers the static and dynamic stress analysis of solids in two and three dimensions. The relevant concepts, theory and modelling issues of the scaled boundary finite element method are discussed and the unique features of the method are highlighted. The applications in computational fracture mechanics are detailed with numerical examples. A unified mesh generation procedure based on quadtree/octree algorithm is described. It also presents examples of fully automatic stress analysis of geometric models in NURBS, STL and digital images. Written in lucid and easy to understand language by the co-inventor of the scaled boundary element method Provides MATLAB as an integral part of the book with the code cross-referenced in the text and the use of the code illustrated by examples Presents new developments in the scaled boundary finite element method with illustrative examples so that readers can appreciate the significant features and potentials of this novel method—especially in emerging technologies such as 3D printing, virtual reality, and digital image-based analysis The Scaled Boundary Finite Element Method: Introduction to Theory and Implementation is an ideal book for researchers, software developers, numerical analysts, and postgraduate students in many fields of engineering and science.
Download or read book Advanced Dam Engineering for Design Construction and Rehabilitation written by R.B. Jansen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present state of the art of dam engineering has been ronmental, and political factors, which, though important, attained by a continuous search for new ideas and methods are covered in other publications. while incorporating the lessons of the past. In the last 20 The rapid progress in recent times has resulted from the years particularly there have been major innovations, due combined efforts of engineers and associated scientists, as largely to a concerted effort to blend the best of theory and exemplified by the authorities who have contributed to this practice. Accompanying these achievements, there has been book. These individuals have brought extensive knowledge a significant trend toward free interchange among the pro to the task, drawn from experience throughout the world. fessional disciplines, including open discussion of prob With the convergence of such distinguished talent, the op lems and their solutions. The inseparable relationships of portunity for accomplishment was substantial. I gratefully hydrology, geology, and seismology to engineering have acknowledge the generous cooperation of these writers, and been increasingly recognized in this field, where progress am indebted also to other persons and organizations that is founded on interdisciplinary cooperation. have allowed reference to their publications; and I have This book presents advances in dam engineering that attempted to acknowledge this obligation in the sections have been achieved in recent years or are under way. At where the material is used. These courtesies are deeply ap tention is given to practical aspects of design, construction, preciated.
Download or read book Earthquake Analysis and Design of Industrial Structures and Infra structures written by Indrajit Chowdhury and published by Springer. This book was released on 2018-10-06 with total page 1066 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite significant development in earthquake analysis and design in the last 50 years or more, different structures related to industry, infra structure and human habitats get destroyed with monotonic regularity under strong motion earthquake. Even the recent earthquake in Mexico in September 2017 killed a number of people and destroyed national assets amounting to hundreds of millions of dollars. Careful evaluation of the technology reveals that, despite significant development in earthquake engineering, most of the books that are available on the market for reference are primarily focused towards buildings and framed type structures. It is accepted that during an earthquake it is buildings that get destroyed most and has been the biggest killers of human life. Yet, there are a number of structures like retaining walls, water tanks, Bunkers, silos, tall chimneys, bridge piers etc that are equally susceptible to earthquake, and if damaged can cause serious trouble and great economic distress. Unfortunately, many of these systems are analyzed by techniques that are too simplified, unrealistic/obsolete or nothing is done about them, ignoring completely the seismic effects, as no guidelines exist for their analysis/design (like seismic analysis of counterfort retaining walls or dynamic pressures on bunker walls etc.). This highly informative book addresses many of these items for which there exists a significant gap in technology and yet remain an important life line of considerable commercial significance.The book is an outcome of authors' academic research and practice across the four continents (USA, Europe, Africa and Asia) in the last thirty two years, where many of these technologies have been put in practice, that got tested against real time earthquakes. All methods presented herein have been published previously in peer reviewed research journals and international conferences of repute before being put to practice. Professionals working in international EPC and consulting engineering firms, graduates taking advanced courses in earthquake engineering, doctoral scholars pursuing research in earthquake engineering in the area of dynamic soil structure interaction (DSSI) and advanced under graduates wanting to self-learn and update themselves on earthquake analysis and design are greatly benefited from this book.
Download or read book Design of Gravity Dams written by Bureau Of Reclamation and published by . This book was released on 2011-03 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Earthquake Engineering written by Michael Beer and published by Springer. This book was released on 2016-01-30 with total page 3953 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Encyclopedia of Earthquake Engineering is designed to be the authoritative and comprehensive reference covering all major aspects of the science of earthquake engineering, specifically focusing on the interaction between earthquakes and infrastructure. The encyclopedia comprises approximately 300 contributions. Since earthquake engineering deals with the interaction between earthquake disturbances and the built infrastructure, the emphasis is on basic design processes important to both non-specialists and engineers so that readers become suitably well informed without needing to deal with the details of specialist understanding. The encyclopedia’s content provides technically-inclined and informed readers about the ways in which earthquakes can affect our infrastructure and how engineers would go about designing against, mitigating and remediating these effects. The coverage ranges from buildings, foundations, underground construction, lifelines and bridges, roads, embankments and slopes. The encyclopedia also aims to provide cross-disciplinary and cross-domain information to domain-experts. This is the first single reference encyclopedia of this breadth and scope that brings together the science, engineering and technological aspects of earthquakes and structures.
Download or read book Earthquake Response of Concrete Gravity Dams written by Gregory L. Fenves and published by . This book was released on 1984 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamental Concepts of Earthquake Engineering written by Roberto Villaverde and published by CRC Press. This book was released on 2009-01-16 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: While successfully preventing earthquakes may still be beyond the capacity of modern engineering, the ability to mitigate damages with strong structural designs and other mitigation measures are well within the purview of science. Fundamental Concepts of Earthquake Engineering presents the concepts, procedures, and code provisions that are currentl
Download or read book Earthquake Engineering for Concrete Dams written by Anil K. Chopra and published by John Wiley & Sons. This book was released on 2020-01-23 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to modern-day methods for earthquake engineering of concrete dams Earthquake analysis and design of concrete dams has progressed from static force methods based on seismic coefficients to modern procedures that are based on the dynamics of dam–water–foundation systems. Earthquake Engineering for Concrete Dams offers a comprehensive, integrated view of this progress over the last fifty years. The book offers an understanding of the limitations of the various methods of dynamic analysis used in practice and develops modern methods that overcome these limitations. This important book: Develops procedures for dynamic analysis of two-dimensional and three-dimensional models of concrete dams Identifies system parameters that influence their response Demonstrates the effects of dam–water–foundation interaction on earthquake response Identifies factors that must be included in earthquake analysis of concrete dams Examines design earthquakes as defined by various regulatory bodies and organizations Presents modern methods for establishing design spectra and selecting ground motions Illustrates application of dynamic analysis procedures to the design of new dams and safety evaluation of existing dams. Written for graduate students, researchers, and professional engineers, Earthquake Engineering for Concrete Dams offers a comprehensive view of the current procedures and methods for seismic analysis, design, and safety evaluation of concrete dams.
Download or read book Dam Engineering written by Zhongzhi Fu and published by BoD – Books on Demand. This book was released on 2021-03-31 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dams are critical structures in the sense that damage or breach of even a small dam may cause an unacceptable loss of life and property. Therefore, the safety of dams over the intended lifespan is of utmost importance for unrestricted operation. The basic prerequisites for any safe and successful operation of a dam include state-of-the-art design, experimental investigations of the construction material and properties of the foundation, a refined theoretical analysis of relevant load cases, and high-quality construction. In the past decades, many advancements have been achieved in both construction technologies and design, including those for the prediction of the long-term behavior of dams under various loading conditions. As such, this book examines these advancements with respect to the design, construction, and performance of earth, rockfill, and concrete dams. Over eight chapters, this book provides a comprehensive overview of the latest progress and research in dam engineering.
Download or read book Validation of Dynamic Analyses of Dams and Their Equipment written by Jean-Jacques Fry and published by CRC Press. This book was released on 2018-06-27 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: Validation of Dynamic Analyses of Dams and Their Equipment is the outcome of a three year cooperation program between CFBR (Comite Francais des Barrages et Reservoirs or French Committee on Large dams) and JCOLD (Japan Commission on Large Dams), and focusses on the dynamic behavior of concrete and embankment dams analyzed based on acceleration records of the JCOLD data base. The book covers a broad range of topics, including simplified and detailed methods of dynamic analysis for the seismic response of concrete and embankment dams compared with measured behavior. The response of embankment dams subjected to a 1.0 g foundation acceleration time history is computed by several analytical methods and compared. The modelling of stress-strain behavior of compacted soils for seismic stability analysis of earth-fill dams and its application for a failed earthfill dam is described. The cracking of the face slab of four faced rockfill dams during earthquakes is analyzed. The seismic behavior of concrete arch dams is discussed by the comparison of numerical and experimental results. Displacement-based seismic assessment of concrete dams is presented. Finally the book contains a comparison between the Japanese and French design criteria of gates and a comparison of the analysis of gates and field measurements. Validation of Dynamic Analyses of Dams and Their Equipment will be useful to professional and academics involved or interested in dam engineering.
Download or read book Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions written by Francesco Silvestri and published by CRC Press. This book was released on 2019-07-19 with total page 7743 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions contains invited, keynote and theme lectures and regular papers presented at the 7th International Conference on Earthquake Geotechnical Engineering (Rome, Italy, 17-20 June 2019. The contributions deal with recent developments and advancements as well as case histories, field monitoring, experimental characterization, physical and analytical modelling, and applications related to the variety of environmental phenomena induced by earthquakes in soils and their effects on engineered systems interacting with them. The book is divided in the sections below: Invited papers Keynote papers Theme lectures Special Session on Large Scale Testing Special Session on Liquefact Projects Special Session on Lessons learned from recent earthquakes Special Session on the Central Italy earthquake Regular papers Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions provides a significant up-to-date collection of recent experiences and developments, and aims at engineers, geologists and seismologists, consultants, public and private contractors, local national and international authorities, and to all those involved in research and practice related to Earthquake Geotechnical Engineering.
