Download or read book Chinese Standard GB GB T GBT JB JB T YY HJ NB HG QC SL SN SH JJF JJG CJ TB YD YS NY FZ JG QB SJ SY DL AQ CB GY JC JR JT written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 7263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards and Industry Standards (Total 17,000 standards).
Download or read book GB T 17301 1998 Translated English of Chinese Standard GB T 17301 1998 GBT17301 1998 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2024-08-08 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the permissible limits for rounding and chamfering of edges and corners in order to reduce the risk of injury to drivers or maintenance personnel when operating earth-moving machinery and performing maintenance work. This standard applies to the operation and maintenance passages and exit devices specified in GB/T 17299 and GB/T 17300 and the operating space for earth-moving machinery drivers specified in GB 8498. 2 References The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard was published, the versions shown were valid. All standards may be revised, so the parties using this standard shall explore the possibility of using the latest versions of the following standards. GB/T 17299-1998 Earth-moving machinery - Minimum access dimensions GB/T 17300-1998 Earth-moving machinery - Access systems GB 8498-87 Earth-moving machinery - Basic types - Vocabulary 3 Technical requirements If structural edges and corners of metal or non-metal materials (see Figure 1) are hard enough to bruise or pierce human skin, the structures shall comply with the requirements of 3.1~3.3. GB/T 17301-1998 www.ChineseStandard.net Buy True-PDF Auto-delivery Page 6 of 6 Figure 1 -- Edges and corners 3.1 The edges and corners of parts shall be rounded or chamfered, with a minimum size of 0.3 mm, as shown in Figure 2; for edges with a thickness of no more than 1 mm, protective strips shall be installed. 3.2 The external corners of the driver's cab, working doors or other sharp objects shall be rounded with a radius of not less than 4 mm. 3.3 The edges/corners of handles and handgrips shall have a radius of not less than 5 mm. Figure 2 -- Rounding and chamfering of edges/corners __________ END __________ EdgeEdgeCornerRounding Chamfering
Download or read book Catalogue written by International Organization for Standardization and published by . This book was released on 2001 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book List of English translated Chinese standards GB T written by https://www.codeofchina.com and published by https://www.codeofchina.com. This book was released on with total page 3495 pages. Available in PDF, EPUB and Kindle. Book excerpt: HTTPS://WWW.CODEOFCHINA.COM EMAIL:[email protected] "Codeofchina Inc., a part of TransForyou (Beijing) Translation Co., Ltd., is a professional Chinese code translator in China. Now, Codeofchina Inc. is running a professional Chinese code website, www.codeofchina.com. Through this website, Codeofchina Inc. provides English-translated Chinese codes to clients worldwide. About TransForyou TransForyou (Beijing) Translation Co., Ltd., established in 2003, is a reliable language service provider for clients at home and abroad. Since our establishment, TransForyou has been aiming to build up a translation brand with our professional dedicated service. Currently, TransForyou is the director of China Association of Engineering Construction Standardization (CECS); the committeeman of Localization Service Committee / Translators Association of China (TAC) and the member of Boya Translation Culture Salon (BTCS); and the field study center of the University of the University of International Business & Economics (UIBE) and Hebei University (HU). In 2016, TransForyou ranked 27th among Asian Language Service Providers by Common Sense Advisory. "
Download or read book GB T 16936 2007 Translated English of Chinese Standard GBT 16936 2007 GB T16936 2007 GBT16936 2007 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2014-12-14 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies a method for testing internal combustion engines intended for propulsion of earth-moving machinery as defined in GB/T 8498. This standard applies to evaluate the performance of earth-moving machinery engine. It is used to introduce, at full load condition, the engine characteristic curve of power, fuel consumption rate versus the rotation speed. These engines may be the natural aspirated or pressure-charged, either using a mechanical pressure-charger or turbocharger. This standard concerns internal combustion engines used in earth-moving machinery and included in one of the following categories: - reciprocating internal combustion engines (spark-ignition or compression-ignition) but excluding free piston engines; - rotary piston engines.
Download or read book GB GBT GB T Chinese Standard English translated version Catalog001 written by Dr. Meng Yongye CODEOFCHINA and published by Codeofchina Inc.. This book was released on 2018-05-04 with total page 3955 pages. Available in PDF, EPUB and Kindle. Book excerpt: All English-translated Chinese codes are available at: www.codeofchina.com
Download or read book ISO Catalogue written by International Organization for Standardization and published by . This book was released on 2007 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Mobile Heavy Equipment written by Gus Wright and published by Jones & Bartlett Learning. This book was released on 2017-09-21 with total page 1423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Mobile Heavy Equipment provides students with a thorough introduction to the diagnosis, repair, and maintenance of off-road mobile heavy equipment. With comprehensive, up-to-date coverage of the latest technology in the field, it addresses the equipment used in construction, agricultural, forestry, and mining industries.
Download or read book List of English translated Chinese standards 2017 written by https://www.codeofchina.com and published by https://www.codeofchina.com. This book was released on with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: HTTPS://WWW.CODEOFCHINA.COM EMAIL:[email protected] "Codeofchina Inc., a part of TransForyou (Beijing) Translation Co., Ltd., is a professional Chinese code translator in China. Now, Codeofchina Inc. is running a professional Chinese code website, www.codeofchina.com. Through this website, Codeofchina Inc. provides English-translated Chinese codes to clients worldwide. About TransForyou TransForyou (Beijing) Translation Co., Ltd., established in 2003, is a reliable language service provider for clients at home and abroad. Since our establishment, TransForyou has been aiming to build up a translation brand with our professional dedicated service. Currently, TransForyou is the director of China Association of Engineering Construction Standardization (CECS); the committeeman of Localization Service Committee / Translators Association of China (TAC) and the member of Boya Translation Culture Salon (BTCS); and the field study center of the University of the University of International Business & Economics (UIBE) and Hebei University (HU). In 2016, TransForyou ranked 27th among Asian Language Service Providers by Common Sense Advisory. "
Download or read book Tools and Algorithms for the Construction and Analysis of Systems written by Kurt Jensen and published by Springer Science & Business Media. This book was released on 2004-03-18 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 10th International Conference on Tools and Algorithms for the Construction and Analysis of Systems, TACAS 2004, held in Barcelona, Spain in March/April 2004. The 37 revised full papers and 6 revised tool demonstration papers presented were carefully reviewed and selected from a total of 162 submissions. The papers are organized in topical sections on theorem proving, probabilistic model checking, testing, tools, explicit state and Petri nets, scheduling, constraint solving, timed systems, case studies, software, temporal logic, abstraction, and automata techniques.
Download or read book Resources in Education written by and published by . This book was released on 1997 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book GB GB T GBT Product Catalog Translated English of Chinese Standard All national standards GB GB T GBT GBZ written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 2809 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards - Category: GB; GB/T, GBT.
Download or read book Dictionary of Occupational Titles written by and published by . This book was released on 1949 with total page 1554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supplement to 3d ed. called Selected characteristics of occupations (physical demands, working conditions, training time) issued by Bureau of Employment Security.
Download or read book Noise Pollution Hearings Before the Subcommission on Air and Water Pollution 92 2 on S 1016 3342 and H R 11021 March 24 1972 San Francisco CA April 12 13 1972 Washington D C written by United States. Congress. Senate. Committee on Public Works and published by . This book was released on 1972 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Noise Pollution written by United States. Congress. Senate. Committee on Public Works. Subcommittee on Air and Water Pollution and published by . This book was released on 1972 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Municipal Journal and Public Works written by and published by . This book was released on 1919 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dictionary of Occupational Titles Definitions of titles written by United States Employment Service. Division of Occupational Analysis and published by . This book was released on 1949 with total page 1558 pages. Available in PDF, EPUB and Kindle. Book excerpt:
