Download or read book Dynamics with Friction written by Ardshir Guran and published by World Scientific. This book was released on 2001 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: The dynamics of dissipative mechanical and structural systems is being investigated at various institutions and laboratories worldwide with ever-increasing sophistication of modeling, analysis and experiments.This book offers a collection of contributions from these research centers that represent the state-of-the-art in the study of friction oscillators. It provides the reader with the fruits of a team effort by leaders in this fascinating field.The present part II of this volume on Dynamics with Friction is a continuation of the previous part I, and is designed to help synthesize our current knowledge regarding the role of friction in mechanical and structural systems as well as everyday life. The topics covered include interaction of vibration and friction at dry sliding contacts, friction-induced instability in disks, dynamics of lubricated flexible links in kinematic chains, modal interactions in periodic structures, dynamics of an experimentally excited beam, transient waves in viscoelastic materials, dynamic stability of plates with damping, friction modeling and dynamic computation, damping through use of passive and semi-active dry friction forces.This book gives a comprehensive picture of dynamics of dissipative mechanical and structural systems. It also gives an up-to-date account of the present state of the field. It will be of interest to engineers, rheologists, material scientists, applied mathematicians, physicists and historians of science and technology.
Download or read book Dynamics With Friction Modeling Analysis And Experiment Part I written by Ardeshir Guran and published by World Scientific. This book was released on 1996-08-23 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: The dynamics of dissipative mechanical and structural systems is being investigated at various institutions and laboratories worldwide with ever-increasing sophistication of modeling, analysis and experiments. This book offers a collection of contributions from these research centers that represent the state-of-the-art in the study of friction oscillators. It provides the reader with the fruits of a team effort by leaders in this fascinating field.The topics covered include friction modeling, self-excited friction oscillators, homogeneous frictional systems, unsteady lubricated friction, instantaneous contact geometry, impact damping, friction-induced instability and nonlinear dynamics of stick-slip systems, among other topics.This book gives a comprehensive picture of dynamics of dissipative mechanical and structural systems. It also gives an up-to-date account of the present state of the field. It will be of interest to engineers, rheologists, material scientists, applied mathematicians, physicists and historians of science and technology.
Download or read book Dynamics with Friction written by and published by . This book was released on 2001 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamics With Friction Modeling Analysis And Experiments Part Ii written by Ardeshir Guran and published by World Scientific. This book was released on 2001-06-01 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: The dynamics of dissipative mechanical and structural systems is being investigated at various institutions and laboratories worldwide with ever-increasing sophistication of modeling, analysis and experiments.This book offers a collection of contributions from these research centers that represent the state-of-the-art in the study of friction oscillators. It provides the reader with the fruits of a team effort by leaders in this fascinating field.The present part II of this volume on Dynamics with Friction is a continuation of the previous part I, and is designed to help synthesize our current knowledge regarding the role of friction in mechanical and structural systems as well as everyday life. The topics covered include interaction of vibration and friction at dry sliding contacts, friction-induced instability in disks, dynamics of lubricated flexible links in kinematic chains, modal interactions in periodic structures, dynamics of an experimentally excited beam, transient waves in viscoelastic materials, dynamic stability of plates with damping, friction modeling and dynamic computation, damping through use of passive and semi-active dry friction forces.This book gives a comprehensive picture of dynamics of dissipative mechanical and structural systems. It also gives an up-to-date account of the present state of the field. It will be of interest to engineers, rheologists, material scientists, applied mathematicians, physicists and historians of science and technology.
Download or read book Dynamics with Friction written by Ardeshir Guran and published by . This book was released on 1996-08 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling Analysis And Control Of Dynamical Systems With Friction And Impacts written by Pawel Olejnik and published by #N/A. This book was released on 2017-07-07 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is aimed primarily towards physicists and mechanical engineers specializing in modeling, analysis, and control of discontinuous systems with friction and impacts. It fills a gap in the existing literature by offering an original contribution to the field of discontinuous mechanical systems based on mathematical and numerical modeling as well as the control of such systems. Each chapter provides the reader with both the theoretical background and results of verified and useful computations, including solutions of the problems of modeling and application of friction laws in numerical computations, results from finding and analyzing impact solutions, the analysis and control of dynamical systems with discontinuities, etc. The contents offer a smooth correspondence between science and engineering and will allow the reader to discover new ideas. Also emphasized is the unity of diverse branches of physics and mathematics towards understanding complex piecewise-smooth dynamical systems. Mathematical models presented will be important in numerical experiments, experimental measurements, and optimization problems found in applied mechanics.
Download or read book Dynamical Contact Problems with Friction written by Walter Sextro and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to describe an efficient procedure to model dynamical contact problems with friction. This procedure is applied to different practical problems and validated by experiments. Friction contacts are used to transmit forces or to dissipate energy. Examples for dynamical engineering systems with friction are brakes, machine tools, motors, turbines, bearings or wheel-rail systems. A better understanding of friction phenomena can result in improvements like the reduction of noise and maintenance costs, increased life time of machines and improved energy efficiency. Dependent on the features of the friction contact, different contact models and solution methods are applied.
Download or read book Nonlinear Structural Dynamics and Damping written by Juan Carlos Jauregui and published by Springer. This book was released on 2019-03-14 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book compiles recent research in the field of nonlinear dynamics, vibrations and damping applied to engineering structures. It addresses the modeling of nonlinear vibrations in beams, frames and complex mechanical systems, as well as the modeling of damping systems and viscoelastic materials applied to structural dynamics. The book includes several chapters related to solution techniques and signal analysis techniques. Last but not least, it deals with the identification of nonlinear responses applied to condition monitoring systems.
Download or read book Handbook of Friction Vibration Interactions written by Gang Sheng Chen and published by Elsevier. This book was released on 2014-07-10 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction-vibration interactions are common but important phenomena in science and engineering. Handbook of Friction-Vibration Interactions introduces the principles and provides the resources to understand and work with them. A unified theoretical framework includes some of the most important engineering applications. The first three chapters in the book introduce basic concepts and analytical methods of friction and vibration. The fourth chapter presents the general principles on friction-vibration interactions, and also touches on various engineering applications. In the fifth chapter the concepts and methods are extended to some of the most critical engineering applications in high-tech industry, presenting the friction-vibration interaction principle and applications in data storage systems. Covers a key topic in science and engineering, with applications in daily life Introduces the principles of friction-vibration interactions Analyzes, presents experiments, and treats real systems ranging from nano to micro to macro scales
Download or read book Control of Machines with Friction written by Brian Armstrong-Hélouvry and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is my ambition in writing this book to bring tribology to the study of control of machines with friction. Tribology, from the greek for study of rubbing, is the discipline that concerns itself with friction, wear and lubrication. Tribology spans a great range of disciplines, from surface physics to lubrication chemistry and engineering, and comprises investigators in diverse specialities. The English language tribology literature now grows at a rate of some 700 articles per year. But for all of this activity, in the three years that I have been concerned with the control of machines with friction, I have but once met a fellow controls engineer who was aware that the field existed, this including many who were concerned with friction. In this vein I must confess that, before undertaking these investigations, I too was unaware that an active discipline of friction existed. The experience stands out as a mark of the specialization of our time. Within tribology, experimental and theoretical understanding of friction in lubricated machines is well developed. The controls engineer's interest is in dynamics, which is not the central interest of the tribologist. The tribologist is more often concerned with wear, with respect to which there has been enormous progress - witness the many mechanisms which we buy today that are lubricated once only, and that at the factory. Though a secondary interest, frictional dynamics are note forgotten by tribology.
Download or read book Investigation of Dynamic Friction in Lubricated Surfaces written by Hanuman Rachoor and published by . This book was released on 1995 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research reported in this dissertation is concerned with the development of friction models for lubricated contacts. A few analytical models have been developed to investigate the friction under dynamic velocity conditions. In this study, two different tribological situations such as conformal and non-conformal contacts have been chosen. Friction modeling covers boundary, mixed and full fluid film friction regions. A new theory based on the elastic properties of the surface materials, and fluid film properties of the lubricant at the contact has been developed to determine the dynamic friction in boundary, mixed and full hydrodynamic lubrication regions. In the full fluid film lubrication region, friction has been determined from the lubrication principles based on the tribological situation, i.e., hydrodynamic lubrication theory for a short journal bearing and elastohydrodynarnic lubrication theory for a line contact. A conformal contact formed by a short journal bearing operating in the region where hydrodynamic lubrication theory is valid has been considered to develop a model. The model is simulated for unidirectional as well as bi-directional sinusoidal velocity oscillations for various frequencies. Simulation resulted in a phase lag in the fiction and hysteresis in ftiction versus velocity (f vs. U) curves. The results obtained for unidirectional velocity oscillations indicate qualitative agreement with experimental work on lubricated line contact by Hess and Soom (1990). Results for bi-directional oscillations also show phase lag in friction and similar hysteresis in f vs U curves. In addition to the hysteresis, results for the bi-directional velocity oscillations show a discontinuity in friction at velocity reversals. These results have been verified experimentally. A special apparatus to measure the friction has been designed and built by using a sleeve bearing. Experiments have been conducted to measure friction under various velocity conditions, and the results have been used to determine the coefficients required to simulate the analytical model. The analytical model has been simulated for the above coefficients and the results have been compared with the friction measurements. The comparison shows similar hysteresis in f vs U curves for uni-directional and bi-directional velocity oscillations. However, the friction behavior of the apparatus during bi-directional oscillations differs in the magnitude of the discontinuity (step function) at velocity reversals. The above analytical friction model developed for the hydrodynamic short journal bearing has been extended to investigate the effect of resisting forces on the dynamic friction behavior at low speed. Resistance forces include sliding friction as well as the presliding friction Dahl effect. The Dahl effect is due to elastic deformation of the compliance in the system before the force reaches the breakaway magnitude when sliding initiates. In this study, stiffness of the asperities as well as elastic support have been considered. Simulation results of the model for uni-directional velocity oscillations are in qualitative agreement with earlier experimental work. Simulation of the model for bi-directional velocity oscillations shows that the discontinuity at velocity reversals has been replaced by a line with slope. This work indicates that the stiffness, of the elastic compliance can play a significant role in replacing the discontinuity. The above concepts of friction modeling has been extended for a non-conformal contact formed with a cylindrical surface sliding over a flat surface operating on elastohydrodynamic lubrication theory. In this model, elastohydrodynamic lubrication theory has been used to determine the friction in full fluid film region. Simulation results of this model for uni-directional as well as bi-directional sinusoidal velocity oscillations indicate a similar phase lag in the friction and hysteresis in f vs. U curves as observed in the earlier models. Results of the present investigation indicate that the instantaneous friction is not only a function of the instantaneous velocity, but it is also a function of previous velocity or velocity history. These models can be improved with the aid of more experimental work. Also, these models can be extended for stick-slip analysis and for friction compensation.
Download or read book Contact Mechanics friction written by and published by . This book was released on 2003 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Impact Friction Of Solids Structures Machines Theory Applications In Engineering Science Intl Symp written by Ardeshir Guran and published by World Scientific. This book was released on 2000-07-25 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the dynamics of mechanical systems in presence of impact and friction. The contributors are an international group of engineers and scientists from industrial and academic institutions of more than 23 countries around the world concerned with the modeling, analysis, measurement and control of nonsmooth mechanical structures. Contact laws lead to mathematical models that are highly nonlinear and nonsmooth or discontinuous. Discontinuous and nonsmooth processes introduce problems with data processing techniques and analytical methods. Thanks to great advances in computer technology and computational analysis, as well as the introduction of new experimental devices such as the atomic-force microscope and the quartz-crystal-microbalance probe, the study of impact and friction — one of the oldest problems in physics, is now in a phase of rapid and exciting development. The growing number of research breakthroughs have promoted the development of new technologies in the description and design of systems with impact and friction models to understand nature, structures, machines, transportation systems, and other processes. A fairly comprehensive picture of these new developments is presented in this book by researchers who are giving up-to-date accounts of the present state of the field in many aspects.The book is essential for introducing readers in mechanical engineering, material science, applied mathematics, aerospace engineering, ocean engineering, biomechanics, and civil engineering to recent developments in nonsmooth mechanics. It is also useful for self-study purposes by professionals and practitioners in the field.
Download or read book Role of Internal Friction in Dynamic Analysis of Structures written by A.A. Kusainov and published by Routledge. This book was released on 2021-06-23 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improvement in the methods of analysis of structures, machines, aircrafts and ships is one of the most important problems in engineering today. The computational aspects of this problem are being tackled successfully due to developments in computer science. However, for an adequate description of the physical properties of structures, especially those made of newer, non- traditional materials, it is essential to further study their behaviour under different load and kinematic conditions and to develop appropriate physical models that provide a comprehensive and correct description of the actual state of deformation. The objective of this book is to adopt a unified approach for describing the large number of models of internal friction and to offer recommendations regarding the methods of taking it into account at the time of dynamic analysis. It is also intended to provide a comprehensive analysis of the various models, accompanied by detailed solutions of specific problems, which could serve as examples for dynamic analysis of real structures taking into account the effect of internal friction.
Download or read book Friction Induced Vibration in Lead Screw Drives written by Orang Vahid-Araghi and published by Springer Science & Business Media. This book was released on 2010-10-14 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction-Induced Vibration in Lead Screw Drives covers the dynamics of lead screw drives with an emphasis on the role of friction. Friction-induced vibration in lead screws can be the cause of unacceptably high levels of audible noise as well as loss of operation accuracy and shortened life. Although lead screw drives have a long history and their mechanical design and manufacturing aspects are very well understood, the role of friction in their dynamical behavior has not been comprehensively treated. The book draws on the vast body of work on the subject of dynamical systems with friction (such as disk brake systems) and offers said treatment, along with: · Unique coverage of modeling of multi-DOF lead screw systems with friction · Detailed analysis of negative damping, mode coupling, and kinematic constraint instability mechanisms in lead screws drives · A practical parameter identification approach for the velocity dependent coefficient of friction in lead screw drives Friction-Induced Vibration in Lead Screw Drives serves as the definitive text on the friction-induced vibration of lead screws, and includes a practical case study where the developed methods are used to study the excessive noise problem of a lead screw drive system and to put forward design modifications that eliminate the friction-induced vibrations.
Download or read book Dynamic Friction Measurement Modeling and Compensation for Precise Motion Control written by Simon Cohn and published by . This book was released on 1998 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis, measurements of dynamic friction in a hydrodynamic journal bearing were performed for varying sinusoidal velocity excitations, loads, and lubricants. The results indicate that the friction data displays a negative slope in the mixed region of friction vs. velocity (f-v) curves, and also shows that the dynamic friction is not just a function of current velocity, but also a function of velocity history (hysteresis). These results are in agreement with previous experimental investigations by other investigators in lubricated friction. Secondly, a dynamic friction model is fully explored and partially extended to provide quantitative agreement to measured friction values. A contribution to friction modeling was made by reducing the model from a fourth to a second order equation. Parameters were determined for one lubricant and two non-nal loads, and the model output is compared to experimental data. Finally, model-based friction compensation was successfully performed. The dynamic friction model is used as a basis for velocity and position control of an apparatus with high friction by incorporating a function to constantly learn two parameters of the model. Results demonstrate the feasibility of using a rich friction model in real time, and its ability to greatly reduce the tracking errors caused by friction. This thesis was supported by the National Science Foundation under Grant MSS9215636.
Download or read book Computational and Experimental Simulations in Engineering written by Hiroshi Okada and published by Springer Nature. This book was released on 2019-11-16 with total page 1278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest advances, innovations, and applications in the field of computational engineering, as presented by leading international researchers and engineers at the 24th International Conference on Computational & Experimental Engineering and Sciences (ICCES), held in Tokyo, Japan on March 25-28, 2019. ICCES covers all aspects of applied sciences and engineering: theoretical, analytical, computational, and experimental studies and solutions of problems in the physical, chemical, biological, mechanical, electrical, and mathematical sciences. As such, the book discusses highly diverse topics, including composites; bioengineering & biomechanics; geotechnical engineering; offshore & arctic engineering; multi-scale & multi-physics fluid engineering; structural integrity & longevity; materials design & simulation; and computer modeling methods in engineering. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations.