Download or read book Unsteady Combustor Physics written by Tim C. Lieuwen and published by Cambridge University Press. This book was released on 2012-08-27 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developing clean, sustainable energy systems is a pre-eminent issue of our time. Most projections indicate that combustion-based energy conversion systems will continue to be the predominant approach for the majority of our energy usage. Unsteady combustor issues present the key challenge associated with the development of clean, high-efficiency combustion systems such as those used for power generation, heating or propulsion applications. This comprehensive study is unique, treating the subject in a systematic manner. Although this book focuses on unsteady combusting flows, it places particular emphasis on the system dynamics that occur at the intersection of the combustion, fluid mechanics and acoustic disciplines. Individuals with a background in fluid mechanics and combustion will find this book to be an incomparable study that synthesises these fields into a coherent understanding of the intrinsically unsteady processes in combustors.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1998 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermoacoustic Instability written by R. I. Sujith and published by Springer Nature. This book was released on 2021-12-14 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically presents the consolidated findings of the phenomenon of self-organization observed during the onset of thermoacoustic instability using approaches from dynamical systems and complex systems theory. Over the last decade, several complex dynamical states beyond limit cycle oscillations such as quasiperiodicity, frequency-locking, period-n, chaos, strange non-chaos, and intermittency have been discovered in thermoacoustic systems operated in laminar and turbulent flow regimes. During the onset of thermoacoustic instability in turbulent systems, an ordered acoustic field and large coherent vortices emerge from the background of turbulent combustion. This emergence of order from disorder in both temporal and spatiotemporal dynamics is explored in the contexts of synchronization, pattern formation, collective interaction, multifractality, and complex networks. For the past six decades, the spontaneous emergence of large amplitude, self-sustained, tonal oscillations in confined combustion systems, characterized as thermoacoustic instability, has remained one of the most challenging areas of research. The presence of such instabilities continues to hinder the development and deployment of high-performance combustion systems used in power generation and propulsion applications. Even with the advent of sophisticated measurement techniques to aid experimental investigations and vast improvements in computational power necessary to capture flow physics in high fidelity simulations, conventional reductionist approaches have not succeeded in explaining the plethora of dynamical behaviors and the associated complexities that arise in practical combustion systems. As a result, models and theories based on such approaches are limited in their application to mitigate or evade thermoacoustic instabilities, which continue to be among the biggest concerns for engine manufacturers today. This book helps to overcome these limitations by providing appropriate methodologies to deal with nonlinear thermoacoustic oscillations, and by developing control strategies that can mitigate and forewarn thermoacoustic instabilities. The book is also beneficial to scientists and engineers studying the occurrence of several other instabilities, such as flow-induced vibrations, compressor surge, aeroacoustics and aeroelastic instabilities in diverse fluid-mechanical environments, to graduate students who intend to apply dynamical systems and complex systems approach to their areas of research, and to physicists who look for experimental applications of their theoretical findings on nonlinear and complex systems.
Download or read book Documentation of Plasma Physics Pt 1 Experimental Plasma Physics and Theoretical Plasma Physics written by and published by . This book was released on 1974 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Fluid Dynamics for Engineers written by Bengt Andersson and published by Cambridge University Press. This book was released on 2011-12-22 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational fluid dynamics, CFD, has become an indispensable tool for many engineers. This book gives an introduction to CFD simulations of turbulence, mixing, reaction, combustion and multiphase flows. The emphasis on understanding the physics of these flows helps the engineer to select appropriate models to obtain reliable simulations. Besides presenting the equations involved, the basics and limitations of the models are explained and discussed. The book combined with tutorials, project and power-point lecture notes (all available for download) forms a complete course. The reader is given hands-on experience of drawing, meshing and simulation. The tutorials cover flow and reactions inside a porous catalyst, combustion in turbulent non-premixed flow, and multiphase simulation of evaporation spray respectively. The project deals with design of an industrial-scale selective catalytic reduction process and allows the reader to explore various design improvements and apply best practice guidelines in the CFD simulations.
Download or read book Turbulent Premixed Flames written by Nedunchezhian Swaminathan and published by Cambridge University Press. This book was released on 2011-04-25 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: A work on turbulent premixed combustion is important because of increased concern about the environmental impact of combustion and the search for new combustion concepts and technologies. An improved understanding of lean fuel turbulent premixed flames must play a central role in the fundamental science of these new concepts. Lean premixed flames have the potential to offer ultra-low emission levels, but they are notoriously susceptible to combustion oscillations. Thus, sophisticated control measures are inevitably required. The editors' intent is to set out the modeling aspects in the field of turbulent premixed combustion. Good progress has been made on this topic, and this cohesive volume contains contributions from international experts on various subtopics of the lean premixed flame problem.
Download or read book Flow Control written by Mohamed Gad-el-Hak and published by Cambridge University Press. This book was released on 2000-08-15 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough treatment of the basics of flow control and flow control practices.
Download or read book Stability and Transition in Shear Flows written by Peter J. Schmid and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: A detailed look at some of the more modern issues of hydrodynamic stability, including transient growth, eigenvalue spectra, secondary instability. It presents analytical results and numerical simulations, linear and selected nonlinear stability methods. By including classical results as well as recent developments in the field of hydrodynamic stability and transition, the book can be used as a textbook for an introductory, graduate-level course in stability theory or for a special-topics fluids course. It is equally of value as a reference for researchers in the field of hydrodynamic stability theory or with an interest in recent developments in fluid dynamics. Stability theory has seen a rapid development over the past decade, this book includes such new developments as direct numerical simulations of transition to turbulence and linear analysis based on the initial-value problem.
Download or read book Treatise on Geophysics Volume 7 written by David Bercovici and published by Elsevier. This book was released on 2010-05-17 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatise on Geophysics: Mantle Dynamics, Volume 7 aims to provide both a classical and state-of-the-art introduction to the methods and science of mantle dynamics, as well as survey leading order problems (both solved and unsolved) and current understanding of how the mantle works. It is organized around two themes: (1) how is mantle convection studied; and (2) what do we understand about mantle dynamics to date. The first four chapters are thus concerned with pedagogical reviews of the physics of mantle convection; laboratory studies of the fluid dynamics of convection relevant to the mantle; theoretical analysis of mantle dynamics; and numerical analysis and methods of mantle convection. The subsequent chapters concentrate on leading issues of mantle convection itself, which include the energy budget of the mantle; the upper mantle and lithosphere in and near the spreading center (mid-ocean ridge) environment; the dynamics of subducting slabs; hot spots, melting anomalies, and mantle plumes; and finally, geochemical mantle dynamics and mixing. - Self-contained volume starts with an overview of the subject then explores each topic in detail - Extensive reference lists and cross references with other volumes to facilitate further research - Full-color figures and tables support the text and aid in understanding - Content suited for both the expert and non-expert
Download or read book Combustion Noise written by Anna Schwarz and published by Springer Science & Business Media. This book was released on 2009-06-17 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: November, 2008 Anna Schwarz, Johannes Janicka In the last thirty years noise emission has developed into a topic of increasing importance to society and economy. In ?elds such as air, road and rail traf?c, the control of noise emissions and development of associated noise-reduction techno- gies is a central requirement for social acceptance and economical competitiveness. The noise emission of combustion systems is a major part of the task of noise - duction. The following aspects motivate research: • Modern combustion chambers in technical combustion systems with low pol- tion exhausts are 5 - 8 dB louder compared to their predecessors. In the ope- tional state the noise pressure levels achieved can even be 10-15 dB louder. • High capacity torches in the chemical industry are usually placed at ground level because of the reasons of noise emissions instead of being placed at a height suitable for safety and security. • For airplanes the combustion emissions become a more and more important topic. The combustion instability and noise issues are one major obstacle for the introduction of green technologies as lean fuel combustion and premixed burners in aero-engines. The direct and indirect contribution of combustion noise to the overall core noise is still under discussion. However, it is clear that the core noise besides the fan tone will become an important noise source in future aero-engine designs. To further reduce the jet noise, geared ultra high bypass ratio fans are driven by only a few highly loaded turbine stages.
Download or read book NASA SP written by and published by . This book was released on 1962 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Process Modelling and Simulation written by César de Prada and published by MDPI. This book was released on 2019-09-23 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since process models are nowadays ubiquitous in many applications, the challenges and alternatives related to their development, validation, and efficient use have become more apparent. In addition, the massive amounts of both offline and online data available today open the door for new applications and solutions. However, transforming data into useful models and information in the context of the process industry or of bio-systems requires specific approaches and considerations such as new modelling methodologies incorporating the complex, stochastic, hybrid and distributed nature of many processes in particular. The same can be said about the tools and software environments used to describe, code, and solve such models for their further exploitation. Going well beyond mere simulation tools, these advanced tools offer a software suite built around the models, facilitating tasks such as experiment design, parameter estimation, model initialization, validation, analysis, size reduction, discretization, optimization, distributed computation, co-simulation, etc. This Special Issue collects novel developments in these topics in order to address the challenges brought by the use of models in their different facets, and to reflect state of the art developments in methods, tools and industrial applications.
Download or read book Instability and Transition written by M.Y. Hussaini and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability to predict and control viscous flow phenomena is becoming increasingly important in modern industrial application. The Instability and Transition Workshop at Langley was extremely important in help§ ing the scientists community to access the state of knowledge in the area of transition from laminar to turbulent flow, to identify promising future areas of research and to build future interactions between researchers worldwide working in the areas of theoretical, experimental and computational fluid and aero dynamics. The set of two volume contains panel discussions and research contribution with the following objectives: (1) expose the academic community to current technologically important issues of instability and transitions in shear flows over the entire speed range, (2) acquaint the academic community with the unique combination of theoretical, computational and experimental capabilities at LaRC and foster interaction with these facilities. (3) review current state-of-the-art and propose future directions for instability and transition research, (4) accelerate progress in elucidating basic understanding of transition phenomena and in transferring this knowledge into improved design methodologies through improved transition modeling, and (5) establish mechanism for continued interaction.
Download or read book Gas Turbine Engineering Handbook written by Meherwan P. Boyce and published by Elsevier. This book was released on 2017-09-01 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Gas Turbine Engineering Handbook has been the standard for engineers involved in the design, selection, and operation of gas turbines. This revision includes new case histories, the latest techniques, and new designs to comply with recently passed legislation. By keeping the book up to date with new, emerging topics, Boyce ensures that this book will remain the standard and most widely used book in this field. The new Third Edition of the Gas Turbine Engineering Hand Book updates the book to cover the new generation of Advanced gas Turbines. It examines the benefit and some of the major problems that have been encountered by these new turbines. The book keeps abreast of the environmental changes and the industries answer to these new regulations. A new chapter on case histories has been added to enable the engineer in the field to keep abreast of problems that are being encountered and the solutions that have resulted in solving them. - Comprehensive treatment of Gas Turbines from Design to Operation and Maintenance. In depth treatment of Compressors with emphasis on surge, rotating stall, and choke; Combustors with emphasis on Dry Low NOx Combustors; and Turbines with emphasis on Metallurgy and new cooling schemes. An excellent introductory book for the student and field engineers - A special maintenance section dealing with the advanced gas turbines, and special diagnostic charts have been provided that will enable the reader to troubleshoot problems he encounters in the field - The third edition consists of many Case Histories of Gas Turbine problems. This should enable the field engineer to avoid some of these same generic problems
Download or read book Progress in Scale Modeling written by Kozo Saito and published by Springer Science & Business Media. This book was released on 2008-08-20 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scale modeling can play an important role in R&D. When engineers receive some ideas in new product development, they can test how the new design looks by bui- ing scale models and they can get an actual feeling with the prototype through their imagination. Professor Emori often said: “When children play with a toy airplane, their mind is wondering about the prototype airplane which they haven’t ridden. ” Children can use the scale model airplane as a means to enter into an imagi- tive world of wonder by testing in their own way how the actual airplane might function, how the actual airplane can maneuver aerodynamically, what might be the actual sound of a jet engine, how to safely land the actual airplane, and so on. This imagination that scale models can provide for children will help them later develop professional intuition. Physical scale models can never be entirely succe- fully replaced by computer screens where virtual models are displayed and fancy functions are demonstrated. Not only children but also adults can learn things by actually touching things only offered by physical models, helping all of us develop imagination and feeling eventually leading toward Kufu. Einstein’s famous “thought experiments [11],” which helped him to restructure modern physics may possibly and effectively be taught by letting researchers play with scale models!? References 1. I. Emori, K. Saito, and K. Sekimoto, Mokei Jikken no Riron to Ouyou (Scale Models in Engineering: Its Theory and Application), Gihodo, Tokyo, Third Edition, 2000.
Download or read book To Life written by Linda Weintraub and published by Univ of California Press. This book was released on 2012-09-01 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title documents the burgeoning eco art movement from A to Z, presenting a panorama of artistic responses to environmental concerns, from Ant Farms anti-consumer antics in the 1970s to Marina Zurkows 2007 animation that anticipates the havoc wreaked upon the planet by global warming.
Download or read book Understanding Aerospace Chemical Propulsion written by H. S. Mukunda and published by . This book was released on 2017-02-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explores aeronautical and space chemical propulsion. The book provides an understanding of propulsion systems through illustrative description of the systems; analysis of modeled systems; examination of the performance of real systems in this light; and a comparative assessment of aeronautical and space propulsion system elements.
