Download or read book Dynamics of Machines with Variable Mass written by L Cveticanin and published by Routledge. This book was released on 2022-02-13 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to be a complete and integrated text on the dynamic properties of machines, mechanisms, and rotors with variable mass, this book presents new results from investigations based on the general dynamics of systems with variable parameters. The book considers both weak and strong nonlinear vibrations of these systems, and chaotic phenomena are also discussed. The conservation laws and adiabatic invariants for systems with variable mass are formulated and the stability and instability conditions of motion are defined.
Download or read book Dynamics of Machines with Variable Mass written by L Cveticanin and published by CRC Press. This book was released on 1998-10-21 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to be a complete and integrated text on the dynamic properties of machines, mechanisms, and rotors with variable mass, this book presents new results from investigations based on the general dynamics of systems with variable parameters. The book considers both weak and strong nonlinear vibrations of these systems, and chaotic phenomena are also discussed. The conservation laws and adiabatic invariants for systems with variable mass are formulated and the stability and instability conditions of motion are defined.
Download or read book Dynamics of Bodies with Time Variable Mass written by Livija Cveticanin and published by Springer. This book was released on 2015-07-31 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the problem of dynamics of bodies with time-variable mass and moment of inertia. Mass addition and mass separation from the body are treated. Both aspects of mass variation, continual and discontinual, are considered. Dynamic properties of the body are obtained applying principles of classical dynamics and also analytical mechanics. Advantages and disadvantages of both approaches are discussed. Dynamics of constant body is adopted, and the characteristics of the mass variation of the body is included. Special attention is given to the influence of the reactive force and the reactive torque. The vibration of the body with variable mass is presented. One and two degrees of freedom oscillators with variable mass are discussed. Rotors and the Van der Pol oscillator with variable mass are displayed. The chaotic motion of bodies with variable mass is discussed too. To support learning, some solved practical problems are included.
Download or read book Dynamics of Mechanical Systems with Variable Mass written by Hans Irschik and published by Springer. This book was released on 2014-10-16 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents up-to-date and unifying formulations for treating dynamics of different types of mechanical systems with variable mass. The starting point is overview of the continuum mechanics relations of balance and jump for open systems from which extended Lagrange and Hamiltonian formulations are derived. Corresponding approaches are stated at the level of analytical mechanics with emphasis on systems with a position-dependent mass and at the level of structural mechanics. Special emphasis is laid upon axially moving structures like belts and chains and on pipes with an axial flow of fluid. Constitutive relations in the dynamics of systems with variable mass are studied with particular reference to modeling of multi-component mixtures. The dynamics of machines with a variable mass are treated in detail and conservation laws and the stability of motion will be analyzed. Novel finite element formulations for open systems in coupled fluid and structural dynamics are presented.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1969 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Strongly Nonlinear Oscillators written by Livija Cveticanin and published by Springer. This book was released on 2014-05-22 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the presentation of the motion of pure nonlinear oscillatory systems and various solution procedures which give the approximate solutions of the strong nonlinear oscillator equations. The book presents the original author’s method for the analytical solution procedure of the pure nonlinear oscillator system. After an introduction, the physical explanation of the pure nonlinearity and of the pure nonlinear oscillator is given. The analytical solution for free and forced vibrations of the one-degree-of-freedom strong nonlinear system with constant and time variable parameter is considered. Special attention is given to the one and two mass oscillatory systems with two-degrees-of-freedom. The criteria for the deterministic chaos in ideal and non-ideal pure nonlinear oscillators are derived analytically. The method for suppressing chaos is developed. Important problems are discussed in didactic exercises. The book is self-consistent and suitable as a textbook for students and also for professionals and engineers who apply these techniques to the field of nonlinear oscillations.
Download or read book Dynamics and Control of Advanced Structures and Machines written by Hans Irschik and published by Springer Nature. This book was released on 2021-09-20 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected contributions to the 4th International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines. The workshop, which was held in Linz, Austria in September 2019, continued a series of international workshops — the Japan-Austria Joint Workshop on Mechanics and Model Based Control of Smart Materials and Structures, the Russia-Austria Joint Workshop on Advanced Dynamics and Model Based Control of Structures and Machines, and the first three editions of the International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines. The chapters cover a broad spectrum of topics in the field of Advanced Structures and Machines both with respect to theoretical aspects as well as applications to contemporary engineering problems.
Download or read book MECHANICAL ENGINEERING ENERGY SYSTEMS AND SUSTAINABLE DEVELOPMENT Volume I written by Konstantin V. Frolov and published by EOLSS Publications. This book was released on 2009-04-15 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Engineering, Energy Systems and Sustainable Development theme is a component of Encyclopedia of Physical Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The Theme on Mechanical Engineering, Energy Systems and Sustainable Development with contributions from distinguished experts in the field discusses mechanical engineering - the generation and application of heat and mechanical power and the design, production, and use of machines and tools. These five volumes are aimed at the following five major target audiences: University and College Students Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers, NGOs and GOs.
Download or read book International Symposium on History of Machines and MechanismsProceedings HMM 2000 written by Marco Ceccarelli and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Symposium on History of Machines and Mechanisms is a new initiative to promote explicitly researches and publications in the field of the History of TMM (Theory of Machines and Mechanisms). It was held at the University of Cassino, Italy, from 11 to 13 May 2000. The Symposium was devoted mainly to the technical aspects of historical developments and therefore it has been addressed mainly to the IFToMM Community. In fact, most the authors of the contributed papers are experts in TMM and related topics. This has been, indeed, a challenge: convincing technical experts to go further in-depth into the background of their topics of expertise. We have received a very positive response, as can be seen by the fact that these Proceedings contain contributions by authors from all around the world. We received about 50 papers, and after review about 40 papers were accepted for both presentation and publishing in the Proceedings. This means also that the History of TMM is of interest everywhere and, indeed, an in-depth knowledge of the past can be of great help in working on the present and in shaping the future with new ideas. I believe that a reader will take advantage of the papers in these Proceedings with further satisfaction and motivation for her or his work (historical or not). These papers cover the wide field of the History of Mechanical Engineering and particularly the History of TMM.
Download or read book Advanced Dynamics and Control of Structures and Machines written by Hans Irschik and published by Springer Science & Business Media. This book was released on 2004-10-20 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, intended for people in engineering and fundamental sciences, presents an integrated mathematical methodology for advanced dynamics and control of structures and machines, ranging from the derivation of models up to the control synthesis problem. This point of view is particularly useful as the physical insight and the associated structural properties, related e.g. to the Lagrangian or Hamiltonian framework, can be advantageously utilized. To this end, up to date results in disciplines like continuum mechanics, analytical mechanics, thermodynamics and electrodynamics are presented exploiting the differential geometric properties, with the basic notions of this coordinate-free approach revisited in an own chapter. In order to illustrate the proposed methodologies, several industrial applications, e.g., the derivation of exact solutions for the deformation compensation by shaped actuation in elastic bodies, or the coordination of rigid and flexible joint robots, are discussed.
Download or read book Fundamentals of Kinematics and Dynamics of Machines and Mechanisms written by Oleg Vinogradov and published by CRC Press. This book was released on 2000-07-25 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of the kinematics and dynamics of machines lies at the very core of a mechanical engineering background. Although tremendous advances have been made in the computational and design tools now available, little has changed in the way the subject is presented, both in the classroom and in professional references. Fundamentals of Kinematics and Dynamics of Machines and Mechanisms brings the subject alive and current. The author's careful integration of Mathematica software gives readers a chance to perform symbolic analysis, to plot the results, and most importantly, to animate the motion. They get to "play" with the mechanism parameters and immediately see their effects. The downloadable resources contain Mathematica-based programs for suggested design projects. As useful as Mathematica is, however, a tool should not interfere with but enhance one's grasp of the concepts and the development of analytical skills. The author ensures this with his emphasis on the understanding and application of basic theoretical principles, unified approach to the analysis of planar mechanisms, and introduction to vibrations and rotordynamics.
Download or read book Machines and Mechanisms written by David H. Myszka and published by . This book was released on 2005 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides the techniques necessary to study the motion of machines, and emphasizes the application of kinematic theories to real-world machines consistent with the philosophy of engineering and technology programs. This book intents to bridge the gap between a theoretical study of kinematics and the application to practical mechanism.
Download or read book Machine Science Abstracts written by and published by . This book was released on 1965 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Soviet Machine Science written by and published by . This book was released on 1986 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theoretical and Applied Mechanics written by Valentin Molotnikov and published by Springer Nature. This book was released on 2022-11-07 with total page 687 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook summarizes the course of engineering mechanics, designed for one or two semesters, at the undergraduate or graduate level for a range of academic majors. The book covers all the main components of the discipline including: Theoretical Mechanics, Theory of Mechanisms and Machines, Resistance of Materials, Machine Parts and Design Basic; and Interchangeability, Standardization, and Technical Measurements. It can also be used by students of other technical areas in to achieve competence in each of the listed disciplines. The concise presentation facilitates concentration on the most important elements of the concepts presented while also outlining the current state of mechanics, demonstrating engineering applications using various computer packages (MathCad, CosmosWorks, Inkscape, AutoCad), and updating data on engineering materials. Examples of both simple and complex engineering calculations are given at the end of each chapter along with self-assessment questions.
Download or read book Technology Developments the Role of Mechanism and Machine Science and IFToMM written by Marco Ceccarelli and published by Springer Science & Business Media. This book was released on 2011-05-26 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book of a series that will focus on MMS (Mechanism and Machine Science). This book also presents IFToMM, the International Federation on the Promotion of MMS and its activity. This volume contains contributions by IFToMM officers who are Chairs of member organizations (MOs), permanent commissions (PCs), and technical committees (TCs), who have reported their experiences and views toward the future of IFToMM and MMS. The book is composed of three parts: the first with general considerations by high-standing IFToMM persons, the second chapter with views by the chairs of PCs and TCs as dealing with specific subject areas, and the third one with reports by the chairs of MOs as presenting experiences and challenges in national and territory communities. This book will be of interest to a wide public who wish to know the status and trends in MMS both at international level through IFToMM and in national/local frames through the leading actors of activities. In addition, the book can be considered also a fruitful source to find out “who’s who” in MMS, historical backgrounds and trends in MMS developments, as well as for challenges and problems in future activity by IFToMM community and in MMS at large.
Download or read book Dynamics of Rotating Machines written by M. I. Friswell and published by Cambridge University Press. This book was released on 2010-03-31 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enables engineers to understand the dynamics of rotating machines, from basic explanations to detailed numerical models and analysis.
