Download or read book Dynamics and Control of Wastewater Systems Second Edition written by Michae Barnett and published by CRC Press. This book was released on 1998-07-20 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: FROM THE PREFACE Dynamic modeling, computer simulation, and modern control systems are valuable tools for use in both the design and operation of dynamic systems. From the "tools" point of view, this book is designed to show practicing engineers how to develop models capable of describing dynamic behavior and how to "solve" these models using computer simulation. The basic principles of process control are also presented so that the effects of different control systems on dynamic behavior can be established by computer simulation.

Download or read book Upgrading Wastewater Treatment Plants Second Edition written by Glen T. Daigger and published by CRC Press. This book was released on 1998-06-09 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: FROM THE PREFACE In this time of dwindling budgets, increasing service needs, and increasing regulatory requirements, wastewater treatment professionals are continually called upon to upgrade their wastewater treatment plants. To do so efficiently and effectively, one must develop a clear approach to use in upgrading a plant and have the proper tools available to implement that approach. This book is meant to assist readers in developing and implementing their upgrading projects. First, Chapter 1 details the upgrading approach. The tools to be used are presented in Chapters 2 through 6. Finally, in Chapter 7, six case histories are presented to illustrate the plant upgrading techniques presented in the previous chapters. Through this book, the authors hope to assist readers in meeting their upgrade requirements, while making the most efficient use of the resources at hand.

Download or read book Dynamical Modelling Estimation in Wastewater Treatment Processes written by D. Dochain and published by IWA Publishing. This book was released on 2001-12-01 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental quality is becoming an increasing concern in our society. In that context, waste and wastewater treatment, and more specifically biological wastewater treatment processes play an important role. In this book, we concentrate on the mathematical modelling of these processes. The main purpose is to provide the increasing number of professionals who are using models to design, optimise and control wastewater treatment processes with the necessary background for their activities of model building, selection and calibration. The book deals specifically with dynamic models because they allow us to describe the behaviour of treatment plants under the highly dynamic conditions that we want them to operate (e.g. Sequencing Batch Reactors) or we have to operate them (e.g. storm conditions, spills). Further extension is provided to new reactor systems for which partial differential equation descriptions are necessary to account for their distributed parameter nature (e.g. settlers, fixed bed reactors). The model building exercise is introduced as a step-wise activity that, in this book, starts from mass balancing principles. In many cases, different hypotheses and their corresponding models can be proposed for a particular process. It is therefore essential to be able to select from these candidate models in an objective manner. To this end, structure characterisation methods are introduced. Important sections of the book deal with the collection of high quality data using optimal experimental design, parameter estimation techniques for calibration and the on-line use of models in state and parameter estimators. Contents Dynamical Modelling Dynamical Mass Balance Model Building and Analysis Structure Characterisation (SC) Structural Identifiability Practical Identifiability and Optimal Experiment Design for Parameter Estimation (OED/PE) Estimation of Model Parameters Recursive State and Parameter Estimation Glossary Nomenclature

Download or read book Design and Retrofit of Wastewater Treatment Plants for Biological Nutritient Removal written by Clifford W. Randall and published by CRC Press. This book was released on 1998-05-06 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents information that can be used for the design and operation of wastewater treatment plants that utilize biological nutrient removal processes, i.e., processes that utilize biological mechanisms instead of chemical mechanisms, to remove phosphorus and nitrogen from wastewaters. The book provides: basic fundamentals, concepts, and theories; design of prefermentation units, various types of BNR systems, and secondary clarifiers; retrofitting conventional activated sludge plants; modeling considerations; and special considerations for BNR systems. It includes full-scale and pilot plant case histories, design examples, and retrofit of existing plants.

Download or read book Wastewater Reclamation and Reuse written by Takashi Asano and published by CRC Press. This book was released on 1998-06-15 with total page 1570 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effective integration of water and reclaimed wastewater still requires close examination of public health issues, infrastructure and facilities planning, wastewater treatment plant siting, treatment process reliability, economic and financial analyses, and water utility management. This book assembles, analyzes, and reviews the various aspects of wastewater reclamation, recycling, and reuse in most parts of the world. It considers the effective integration of water and reclaimed wastewater, public health issues, infrastructure and facilities planning, waste-water treatment plant siting, treatment process reliability, economic and financial analysis, and water utility management.

Download or read book Municipal Sewage Sludge Management written by Cecil Lue-Hing and published by CRC Press. This book was released on 1998-05-27 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: FROM THE PREFACE This textbook explains and discusses many of the unit operations used for processing municipal sewage sludge. It also contains valuable information on the available methods for final disposition of this sludge. This textbook can be used for planning, designing, and implementing municipal sewage sludge management projects.

Download or read book Aeration written by James Mueller and published by CRC Press. This book was released on 2002-02-27 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The immense environmental challenges facing the world now and in years to come can only be met through marshalling the talents of the best environmental engineers and scientists, and through the use of innovative, cost-effective solutions. Written by three leading aeration experts, Aeration: Principles and Practice, covers the principles and practi

Download or read book Natural Wastewater Treatment Systems Second Edition written by Ronald W. Crites and published by CRC Press. This book was released on 2014-03-14 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Calling for ecologically and economically sound wastewater treatment systems, the authors of Natural Wastewater Treatment Systems explore the use of wetlands, sprinkler or deep irrigation, groundwater recharge, and other natural systems as sustainable methods for the treatment and management of wastewater. Based on work by prominent experts in natural waste treatment, this text provides a thorough explanation on how soil and plants can successfully sustain microbial populations in the treatment of wastewater. Determining that natural systems cost less to construct and operate, and require less energy than mechanical treatment alternatives, this book also explains how these processes produce lower amounts of residual solids, and use little or no chemicals. What’s New in the Second Edition: This revised edition includes current design and regulatory and operational developments in the natural wastewater treatment field. It provides detailed examples and analyses along with significant operational data in each chapter. It also considers how processes provide passive treatment with a minimum of mechanical elements, and describes new approaches to partially mixed ponds, including dual-powered aeration ponds. Introduces the planning procedures and treatment mechanisms responsible for treatment in ponds, wetlands, land application, and soil absorption systems Provides new case studies of constructed wetlands and water reuse systems Presents design criteria and methods of pond treatment and pond effluent upgrading Describes constructed wetlands design procedures, process applications, treatment performance data, and land treatment concepts and design equations Includes information on constituents of emerging concern (CEC) and their fate in natural systems The text discusses wastewater pond systems, free water surface constructed wetlands, subsurface and vertical flow constructed wetlands, land treatment, sludge management, and onsite wastewater systems. It describes residuals and biosolids management, including nitrogen removal pretreatment methods, and uses U.S. customary and metric units in all chapters. It presents case studies of new applications of natural systems and includes worked examples of design equations for ponds and land treatment. It also provides a biosolids regulatory update from a top EPA scientist, and algae reduction technologies for ponds and wetlands. Designed for practicing wastewater engineers and scientists involved in the planning, design, and operation of ponds, wetlands, land treatment, biosolids, and onsite soil-based treatment systems, the book integrates many natural treatment systems into one single source.

Download or read book Modelling Simulation and Control of Urban Wastewater Systems written by Manfred Schütze and published by Springer Science & Business Media. This book was released on 2011-06-27 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: by Professor Poul Harremoes Environmental engineering has been a discipline dominated by empirical approaches to engineering. Historically speaking, the development of urban drainage structures was very successful on the basis of pure empiricism. Just think of the impressive structures built by the Romans long before the discipline of hydraulics came into being. The fact is that the Romans did not know much about the theories of hydraulics, which were discovered as late as the mid-1800s. However, with the Renaissance came a new era. Astronomy (Galileos) and basic physics (Newton) started the scientific revolution and in the mid-1800s Navier and Stokes developed the application of Newtons laws to hydrodynamics, and later, St. Venant the first basic physics description of the motion of water in open channels. The combination of basic physical understanding of the phenomena involved in the flow of water in pipes and the experience gained by "trial and error", the engineering approach to urban drainage improved the design and performance of the engineering drainage infrastructure. However, due to the mathematical complications of the basic equations, solutions were available only to quite simple cases of practical significance until the introduction of new principles of calculation made possible by computers and their ability to crunch numbers. Now even intricate hydraulic phenomena can be simulated with a reasonable degree of confidence that the simulations are in agreement with performance in practice, if the models are adequately calibrated with sample performance data.

Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1990 with total page 1162 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ecological Engineering for Wastewater Treatment written by Carl Etnier and published by CRC Press. This book was released on 2013-10-23 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new science of ecological engineering is winning increasing acceptance all over the world. Established industrial economies like Sweden and the United States are investing more in it as initial skepticism and regulatory hurdles are giving way to burgeoning investments by companies and municipalities, increased research activity, and great inter

Download or read book Biology Of Wastewater Treatment 2nd Edition written by Nicholas F Gray and published by World Scientific. This book was released on 2004-04-06 with total page 1442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive text provides the reader with both a detailed reference and a unified course on wastewater treatment. Aimed at scientists and engineers, it deals with the environmental and biological aspects of wastewater treatment and sludge disposal.The book starts by examining the nature of wastewaters and how they are oxidized in the natural environment. An introductory chapter deals with wastewater treatment systems and examines how natural principles have been harnessed by man to treat his own waste in specialist reactors. The role of organisms is considered by looking at kinetics, metabolism and the different types of micro-organisms involved. All the major biological process groups are examined in detail, in highly referenced chapters; they include fixed film reactors, activated sludge, stabilization ponds, anaerobic systems and vegetative processes. Sludge treatment and disposal is examined with particular reference to the environmental problems associated with the various disposal routes. A comprehensive chapter on public health looks at the important waterborne organisms associated with disease, as well as removal processes within treatment systems. Biotechnology has had an enormous impact on wastewater treatment at every level, and this is explored in terms of resource reuse, biological conversion processes and environmental protection. Finally, there is a short concluding chapter that looks at the sustainability of waste water treatment. The text is fully illustrated and supported by over 3000 references./a

Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1988 with total page 1062 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Water and Wastewater Engineering Design Principles and Practice Second Edition written by Mackenzie L. Davis and published by McGraw Hill Professional. This book was released on 2019-10-04 with total page 1349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. A Fully Updated, In-Depth Guide to Water and Wastewater Engineering Thoroughly revised to reflect the latest advances, procedures, and regulations, this authoritative resource contains comprehensive coverage of the design and construction of municipal water and wastewater facilities. Written by an environmental engineering expert and seasoned academic, Water and Wastewater Engineering: Design Principles and Practice, Second Edition, offers detailed explanations, practical strategies, and design techniques as well as hands-on safety protocols and operation and maintenance procedures. You will get cutting-edge information on water quality standards, corrosion control, piping materials, energy efficiency, direct and indirect potable reuse, and more. Coverage includes: • The design and construction processes • General water supply design considerations • Intake structures and wells • Chemical handling and storage • Coagulation and flocculation • Lime-soda and ion exchange softening • Reverse osmosis and nanofiltration • Sedimentation • Granular and membrane filtration • Disinfection and fluoridation • Removal of specific constituents • Water plant residuals management, process selection, and integration • Storage and distribution systems • Wastewater collection and treatment design considerations • Sanitary sewer design • Headworks and preliminary treatment • Primary treatment • Wastewater microbiology • Secondary treatment by suspended growth biological processes • Secondary treatment by attached growth and hybrid biological processes • Tertiary treatment • Advanced oxidation processes • Direct and indirect potable reuse

Download or read book Quantitative Feedback Theory written by Constantine H. Houpis and published by CRC Press. This book was released on 2018-10-03 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of Quantitative Feedback Theory gained enormous popularity by successfully bridging the gap between theory and real-world engineering practice. Avoiding mathematical theorems, lemmas, proofs, and correlaries, it boiled down to the essential elements of quantitative feedback theory (QFT) necessary to readily analyze, develop, and implement robust control systems. Thoroughly updated and expanded, Quantitative Feedback Theory: Fundamentals and Applications, Second Edition continues to provide a platform for intelligent decision making and design based on knowledge of the characteristics and operating scenario of the plant. Beginning with the fundamentals, the authors build a background in analog and discrete-time multiple-input-single-output (MISO) and multiple-input-multiple-output (MIMO) feedback control systems along with the fundamentals of the QFT technique. The remainder of the book links these concepts to practical applications. Among the many enhancements to this edition are a new section on large wind turbine control system, four new chapters, and five new appendices. The new chapters cover non-diagonal compensator design for MIMO systems, QFT design involving Smith predictors for time delay systems with uncertainty, weighting matrices and control authority, and QFT design techniques applied to real-world industrial systems. Quantitative Feedback Theory: Fundamentals and Applications, Second Edition includes new and revised examples and end-of-chapter problems and offers a companion CD that supplies MIMO QFT computer-aided design (CAD) software. It is the perfect guide to effectively and intuitively implementing QFT control.

Download or read book Mathematical Modelling and Computer Simulation of Activated Sludge Systems written by Jacek Makinia and published by IWA Publishing. This book was released on 2010-08-31 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This international, comprehensive guide to modeling and simulation studies in activated sludge systems leads the reader through the entire modeling process – from building a mechanistic model to applying the model in practice. Mathematical Modelling and Computer Simulation of Activated Sludge Systems will: Enhance the readers’ understanding of different model concepts for several (most essential) biochemical processes in the advanced activated sludge systems Provide extensive and up-to-date coverage of experimental methodologies of a complete model parameter estimation (longitudinal dispersion coefficient, influent wastewater fractions, kinetic and stoichiometric coefficients, settling velocity, etc.) Summarize and critically review the ranges of model parameters reported in literature Compare the existing protocols aiming at a systematic organization of the simulation study Outline the capabilities of the existing commercial simulators Present documented, successful case studies of practical model applications as a guide while planning a simulation study. The book is organized to provide a general background and some basic definitions, then theoretical aspects of modeling and finally, the issues important for practical model applications. Mathematical Modelling and Computer Simulation of Activated Sludge Systems can be used as supplementary material for a graduate level wastewater engineering courses and is useful to a wide audience of researchers and practitioners. Experienced model users such as consultants, trained plant management staff may find the book useful as a reference and as a resource for self-guided study. Visit the IWA WaterWiki to read and share material related to this title: http://www.iwawaterwiki.org/xwiki/bin/view/Articles/MathmematicalModellingandActivatedSludgeSystems

Download or read book Frontiers in Wastewater Treatment and Modelling written by Giorgio Mannina and published by Springer. This book was released on 2017-05-04 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the latest research advances, innovations, and applications in the field of water management and environmental engineering as presented by leading researchers, engineers, life scientists and practitioners from around the world at the Frontiers International Conference on Wastewater Treatment (FICWTM), held in Palermo, Italy in May 2017. The topics covered are highly diverse and include the physical processes of mixing and dispersion, biological developments and mathematical modeling, such as computational fluid dynamics in wastewater, MBBR and hybrid systems, membrane bioreactors, anaerobic digestion, reduction of greenhouse gases from wastewater treatment plants, and energy optimization. The contributions amply demonstrate that the application of cost-effective technologies for waste treatment and control is urgently needed so as to implement appropriate regulatory measures that ensure pollution prevention and remediation, safeguard public health, and preserve the environment. The contributions were selected by means of a rigorous peer-review process and highlight many exciting ideas that will spur novel research directions and foster multidisciplinary collaboration among different water specialists.