Download or read book Dynamics and Control of Thermal Reactors written by Massachusetts Institute of Technology. Nuclear Engineering Project and published by . This book was released on 1954 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamics and Control of Nuclear Reactors written by Thomas W. Kerlin and published by Academic Press. This book was released on 2019-10-05 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamics and Control of Nuclear Reactors presents the latest knowledge and research in reactor dynamics, control and instrumentation; important factors in ensuring the safe and economic operation of nuclear power plants. This book provides current and future engineers with a single resource containing all relevant information, including detailed treatments on the modeling, simulation, operational features and dynamic characteristics of pressurized light-water reactors, boiling light-water reactors, pressurized heavy-water reactors and molten-salt reactors. It also provides pertinent, but less detailed information on small modular reactors, sodium fast reactors, and gas-cooled reactors. Provides case studies and examples to demonstrate learning through problem solving, including an analysis of accidents at Three Mile Island, Chernobyl and Fukushima Daiichi Includes MATLAB codes to enable the reader to apply the knowledge gained to their own projects and research Features examples and problems that illustrate the principles of dynamic analysis as well as the mathematical tools necessary to understand and apply the analysis Publishers Note: Table 3.1 has been revised and will be included in future printings of the book with the following data: Group Decay Constant, li (sec-1) Delayed Neutron Fraction (bi) 1 0.0124 0.000221 2 0.0305 0.001467 3 0.111 0.001313 4 0.301 0.002647 5 1.14 0.000771 6 3.01 0.000281 Total delayed neutron fraction: 0.0067
Download or read book Dynamics and Control in Nuclear Power Stations written by British Nuclear Energy Society and published by Thomas Telford. This book was released on 1992 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume covers a wider view of the aspects of control of nuclear power stations by taking into consideration the plant as a whole and the protection systems employed therein. Authors with world-wide experience consider all the aspects of dynamics and control in the context of both fast and thermal power stations. The topics discussed include both the methods of development and applications within - analysis of plant behaviour, validation of mathematical models, plant testing, design and implementation of controls.
Download or read book Dynamics and Control of Energy Systems written by Achintya Mukhopadhyay and published by Springer Nature. This book was released on 2019-10-14 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances in dynamics and control of different types of energy systems. It covers research on dynamics and control in energy systems from different aspects, namely, combustion, multiphase flow, nuclear, chemical and thermal. The chapters start from the basic concepts so that this book can be useful even for researchers with very little background in the area. A dedicated chapter provides an overview on the fundamental aspects of the dynamical systems approach. The book will be of use to researchers and professionals alike.
Download or read book Dynamics and Control of Chemical Reactors Distillation Columns and Batch Processes DYCORD 95 written by J.B. Rawlings and published by Elsevier. This book was released on 2014-05-23 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three important areas of process dynamics and control: chemical reactors, distillation columns and batch processes are the main topics of discussion and evaluation at the IFAC Symposium on Dynamics and Control of Chemical Reactors, Distillation Columns and Batch Processes (DYCORD '95). This valuable publication was produced from the latest in the series, providing a detailed assessment of developments of key technologies within the field of process dynamics and control.
Download or read book Dynamics and Control of Chemical Reactors and Distillation Columns written by C. McGreavy and published by Elsevier. This book was released on 2014-05-23 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the latest results of both academic and industrial research in the control, modelling and dynamics of two of the most fundamental constituents of all chemical engineering plant. Includes contributions on fixed-bed, gas-phase and tubular reactors, thermal cracking furnaces and distillation columns, related to applications in all major areas of chemical engineering, including petrochemicals and bulk chemical manufacture. Contains 51 papers.
Download or read book Reactor Dynamics and Control written by Lynn E. Weaver and published by . This book was released on 1968 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamics and Control of Chemical Reactors Distillation Columns and Batch Processes DYCORD 92 written by J.G. Balchen and published by Elsevier. This book was released on 2014-05-23 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: In addition to the three main themes: chemical reactors, distillation columns, and batch processes this volume also addresses some of the new trends in dynamics and control methodology such as model based predictive control, new methods for identification of dynamic models, nonlinear control theory and the application of neural networks to identification and control. Provides a useful reference source of the major advances in the field.
Download or read book Fundamentals of Nuclear Engineering written by Brent J. Lewis and published by John Wiley & Sons. This book was released on 2017-03-31 with total page 1233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental of Nuclear Engineering is derived from over 25 years of teaching undergraduate and graduate courses on nuclear engineering. The material has been extensively class tested and provides the most comprehensive textbook and reference on the fundamentals of nuclear engineering. It includes a broad range of important areas in the nuclear engineering field; nuclear and atomic theory; nuclear reactor physics, design, control/dynamics, safety and thermal-hydraulics; nuclear fuel engineering; and health physics/radiation protection. It also includes the latest information that is missing in traditional texts, such as space radiation. The aim of the book is to provide a source for upper level undergraduate and graduate students studying nuclear engineering.
Download or read book Nuclear Reactor Thermal Hydraulics and Other Applications written by Donna Guillen and published by BoD – Books on Demand. This book was released on 2013-02-13 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes contributions from researchers around the world on numerical developments and applications to predict fluid flow and heat transfer, with an emphasis on thermal hydraulics computational fluid dynamics. Our ability to simulate larger problems with greater fidelity has vastly expanded over the past decade. The collection of material presented in this book augments the ever-increasing body of knowledge concerning the important topic of thermal hydraulics. Featured topics include coolant channel analysis, thermal hydraulic transport and mixing, as well as hydrodynamics and heat transfer processes. The contents of this book will interest researchers, scientists, engineers and graduate students.
Download or read book Dynamics of Nuclear Reactors written by David L. Hetrick and published by Amer Nuclear Society. This book was released on 1993-01-01 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a text in nuclear reactor dynamics suitable for undergraduate seniors and graduate students in science and engineering. The topic of reactor dynamics, particularly in the form necessary to understand the computation that occurs both in control system analysis and safety analysis, is treated only incompletely in previous texts. One of the book's important features is that it bridges the gap between the viewpoints of the reactor physicist and the control engineer. It brings them together in such a way that the reader will be able to communicate in the language of either persuasion.
Download or read book High Temperature Gas cooled Reactors written by Tetsuaki Takeda and published by Academic Press. This book was released on 2021-02-24 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Temperature Gas Reactors is the fifth volume in the JSME Series on Thermal and Nuclear Power Generation. Series Editor Yasuo Koizumi and his Volume editors Tetsuaki Takeda and Yoshiyuki Inagaki present the latest research on High-Temperature Gas Reactor (HTGR) development and utilization, beginning with an analysis of the history of HTGRs. A detailed analysis of HTGR design features, including reactor core design, cooling tower design, pressure vessel design, I&C factors and safety design, provides readers with a solid understanding of how to develop efficient and safe HTGR within a nuclear power plant. The authors combine their knowledge to present a guide on the safety of HTGRs throughout the entire reactor system, drawing on their unique experience to pass on lessons learned and best practices to support professionals and researchers in their design and operation of these advanced reactor types. Case studies of critical testing carried out by the authors provide the reader with firsthand information on how to conduct tests safely and effectively and an understanding of which responses are required in unexpected incidents to achieve their research objectives. An analysis of technologies and systems in development and testing stages offer the reader a look to the future of HTGRs and help to direct and inform their further research in heat transfer, fluid-dynamics, fuel options and advanced reactor facility selection. This volume is of interest for nuclear and thermal energy engineers and researchers focusing on HTGRs, HTGR plant designers and operators, regulators, post graduate students of nuclear engineering, national labs, government officials and agencies in power and energy policy and regulations. Written by the leaders and pioneers in nuclear research at the Japanese Society of Mechanical Engineers and draws upon their combined wealth of knowledge and experience Includes real examples and case studies from Japan, the US and Europe to provide a deeper learning opportunity with practical benefits Considers the societal impact and sustainability concerns and goals throughout the discussion Includes safety factors and considerations, as well as unique results from performance testing of HTGR systems.
Download or read book Chemical Reactor Design and Control written by William L. Luyben and published by John Wiley & Sons. This book was released on 2007-07-16 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Reactor Design and Control uses process simulators like Matlab®, Aspen Plus, and Aspen Dynamics to study the design of chemical reactors and their dynamic control. There are numerous books that focus on steady-state reactor design. There are no books that consider practical control systems for real industrial reactors. This unique reference addresses the simultaneous design and control of chemical reactors. After a discussion of reactor basics, it: Covers three types of classical reactors: continuous stirred tank (CSTR), batch, and tubular plug flow Emphasizes temperature control and the critical impact of steady-state design on the dynamics and stability of reactors Covers chemical reactors and control problems in a plantwide environment Incorporates numerous tables and shows step-by-step calculations with equations Discusses how to use process simulators to address diverse issues and types of operations This is a practical reference for chemical engineering professionals in the process industries, professionals who work with chemical reactors, and students in undergraduate and graduate reactor design, process control, and plant design courses.
Download or read book Thermal Hydraulic Analysis of Nuclear Reactors written by Bahman Zohuri and published by Springer. This book was released on 2017-05-23 with total page 845 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised text covers the fundamentals of thermodynamics required to understand electrical power generation systems and the application of these principles to nuclear reactor power plant systems. The book begins with fundamental definitions of units and dimensions, thermodynamic variables and the Laws of Thermodynamics progressing to sections on specific applications of the Brayton and Rankine cycles for power generation and projected reactor systems design issues. It is not a traditional general thermodynamics text, per se, but a practical thermodynamics volume intended to explain the fundamentals and apply them to the challenges facing actual nuclear power plants systems, where thermal hydraulics comes to play. There have been significant new findings for intercooled systems since the previous edition published and they will be included in this volume. New technology plans for using a Nuclear Air-Brayton as a storage system for a low carbon grid are presented along with updated component sizes and performance criteria for Small Modular Reactors. Written in a lucid, straight-forward style while retaining scientific rigor, the content is accessible to upper division undergraduate students and aimed at practicing engineers in nuclear power facilities and engineering scientists and technicians in industry, academic research groups, and national laboratories. The book is also a valuable resource for students and faculty in various engineering programs concerned with nuclear reactors.
Download or read book Advances of Computational Fluid Dynamics in Nuclear Reactor Design and Safety Assessment written by Jyeshtharaj Joshi and published by Woodhead Publishing. This book was released on 2019-06-15 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances of Computational Fluid Dynamics in Nuclear Reactor Design and Safety Assessment presents the latest computational fluid dynamic technologies. It includes an evaluation of safety systems for reactors using CFD and their design, the modeling of Severe Accident Phenomena Using CFD, Model Development for Two-phase Flows, and Applications for Sodium and Molten Salt Reactor Designs. Editors Joshi and Nayak have an invaluable wealth of experience that enables them to comment on the development of CFD models, the technologies currently in practice, and the future of CFD in nuclear reactors. Readers will find a thematic discussion on each aspect of CFD applications for the design and safety assessment of Gen II to Gen IV reactor concepts that will help them develop cost reduction strategies for nuclear power plants. Presents a thematic and comprehensive discussion on each aspect of CFD applications for the design and safety assessment of nuclear reactors Provides an historical review of the development of CFD models, discusses state-of-the-art concepts, and takes an applied and analytic look toward the future Includes CFD tools and simulations to advise and guide the reader through enhancing cost effectiveness, safety and performance optimization
Download or read book Physics of High Temperature Reactors written by Luigi Massimo and published by Elsevier. This book was released on 2013-10-22 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics of High-Temperature Reactors focuses on the physics of high-temperature reactors (HTRs) and covers topics ranging from fuel cycles and refueling strategies to neutron cross-sections, transport and diffusion theory, and resonance absorption. Spectrum calculations and cross-section averaging are also discussed, along with the temperature coefficient and reactor control. Comprised of 16 chapters, this book begins with a general description of the HTR core as well as its performance limitations. The next chapter deals with general considerations about HTR physics, including quantities to be determined and optimized in the design of nuclear reactors. Potential scattering and resonance reactions between neutrons and atomic nuclei are then considered, together with basic aspects of transport and diffusion theory. Subsequent chapters explore methods for solving the diffusion equation; slowing-down and neutron thermalization in graphite; HTR core design, fuel management, and cost calculations; and core dynamics and accident analysis. The final chapter describes the sequence of reactor design calculations. This monograph is written primarily for students of HTR physics who are preparing to enter the field as well as technologists of other disciplines who are working on the system.
Download or read book Dynamics and Control of Microbiological Reactors written by Clemente Messias Gomes and published by . This book was released on 1970 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: