Download or read book Spacecraft Modeling Attitude Determination and Control written by Yaguang Yang and published by CRC Press. This book was released on 2019-02-06 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses all spacecraft attitude control-related topics: spacecraft (including attitude measurements, actuator, and disturbance torques), modeling, spacecraft attitude determination and estimation, and spacecraft attitude controls. Unlike other books addressing these topics, this book focuses on quaternion-based methods because of its many merits. The book lays a brief, but necessary background on rotation sequence representations and frequently used reference frames that form the foundation of spacecraft attitude description. It then discusses the fundamentals of attitude determination using vector measurements, various efficient (including very recently developed) attitude determination algorithms, and the instruments and methods of popular vector measurements. With available attitude measurements, attitude control designs for inertial point and nadir pointing are presented in terms of required torques which are independent of actuators in use. Given the required control torques, some actuators are not able to generate the accurate control torques, therefore, spacecraft attitude control design methods with achievable torques for these actuators (for example, magnetic torque bars and control moment gyros) are provided. Some rigorous controllability results are provided. The book also includes attitude control in some special maneuvers, such as orbital-raising, docking and rendezvous, that are normally not discussed in similar books. Almost all design methods are based on state-spaced modern control approaches, such as linear quadratic optimal control, robust pole assignment control, model predictive control, and gain scheduling control. Applications of these methods to spacecraft attitude control problems are provided. Appendices are provided for readers who are not familiar with these topics.
Download or read book Hamiltonian Perturbation Solutions for Spacecraft Orbit Prediction written by Martín Lara and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-05-10 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analytical solutions to the orbital motion of celestial objects have been nowadays mostly replaced by numerical solutions, but they are still irreplaceable whenever speed is to be preferred to accuracy, or to simplify a dynamical model. In this book, the most common orbital perturbations problems are discussed according to the Lie transforms method, which is the de facto standard in analytical orbital motion calculations.
Download or read book First IAA Conference on Dynamics and Control of Space Systems 2012 written by Anna D. Guerman and published by Univelt. This book was released on 2012-06-30 with total page 1728 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Spacecraft Modeling Attitude Determination and Control written by Yaguang Yang and published by CRC Press. This book was released on 2019-02-06 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses all spacecraft attitude control-related topics: spacecraft (including attitude measurements, actuator, and disturbance torques), modeling, spacecraft attitude determination and estimation, and spacecraft attitude controls. Unlike other books addressing these topics, this book focuses on quaternion-based methods because of its many merits. The book lays a brief, but necessary background on rotation sequence representations and frequently used reference frames that form the foundation of spacecraft attitude description. It then discusses the fundamentals of attitude determination using vector measurements, various efficient (including very recently developed) attitude determination algorithms, and the instruments and methods of popular vector measurements. With available attitude measurements, attitude control designs for inertial point and nadir pointing are presented in terms of required torques which are independent of actuators in use. Given the required control torques, some actuators are not able to generate the accurate control torques, therefore, spacecraft attitude control design methods with achievable torques for these actuators (for example, magnetic torque bars and control moment gyros) are provided. Some rigorous controllability results are provided. The book also includes attitude control in some special maneuvers, such as orbital-raising, docking and rendezvous, that are normally not discussed in similar books. Almost all design methods are based on state-spaced modern control approaches, such as linear quadratic optimal control, robust pole assignment control, model predictive control, and gain scheduling control. Applications of these methods to spacecraft attitude control problems are provided. Appendices are provided for readers who are not familiar with these topics.
Download or read book Spacecraft Attitude Determination and Control written by J.R. Wertz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 877 pages. Available in PDF, EPUB and Kindle. Book excerpt: Roger D. Werking Head, Attitude Determination and Control Section National Aeronautics and Space Administration/ Goddard Space Flight Center Extensiye work has been done for many years in the areas of attitude determination, attitude prediction, and attitude control. During this time, it has been difficult to obtain reference material that provided a comprehensive overview of attitude support activities. This lack of reference material has made it difficult for those not intimately involved in attitude functions to become acquainted with the ideas and activities which are essential to understanding the various aspects of spacecraft attitude support. As a result, I felt the need for a document which could be used by a variety of persons to obtain an understanding of the work which has been done in support of spacecraft attitude objectives. It is believed that this book, prepared by the Computer Sciences Corporation under the able direction of Dr. James Wertz, provides this type of reference. This book can serve as a reference for individuals involved in mission planning, attitude determination, and attitude dynamics; an introductory textbook for stu dents and professionals starting in this field; an information source for experimen ters or others involved in spacecraft-related work who need information on spacecraft orientation and how it is determined, but who have neither the time nor the resources to pursue the varied literature on this subject; and a tool for encouraging those who could expand this discipline to do so, because much remains to be done to satisfy future needs.
Download or read book Dynamics of Tethered Satellite Systems written by Vladimir Aslanov and published by Elsevier. This book was released on 2012-10-16 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aimed at engineering students and professionals working in the field of mechanics of space flight, this book examines space tether systems – one of the most forward-thinking directions of modern astronautics. The main advantage of this technology is the simplicity, profitability and ecological compatibility: space tethers allow the execution of various manoeuvers in orbit without costs of jet fuel due to the use of gravitational and electromagnetic fields of the Earth. This book will acquaint the reader with the modern state of the space tether's dynamics, with specific attention on the research projects of the nearest decades. This book presents the most effective mathematical models and the methods used for the analysis and prediction of space tether systems' motion; attention is also given to the influence of the tether on spacecraft's motion, to emergencies and chaotic modes. - Written by highly qualified experts with practical experience in both the fields of mechanics of space flight, and in the teaching - Contains detailed descriptions of mathematical models and methods, and their features, that allow the application of the material of the book to the decision of concrete practical tasks - New approaches to the decision of problems of space flight mechanics are offered, and new problems are posed
Download or read book Rigid Body Dynamics for Space Applications written by Vladimir Aslanov and published by Butterworth-Heinemann. This book was released on 2017-04-22 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rigid Body Dynamics for Space Applications explores the modern problems of spaceflight mechanics, such as attitude dynamics of re-entry and space debris in Earth's atmosphere; dynamics and control of coaxial satellite gyrostats; deployment, dynamics, and control of a tether-assisted return mission of a re-entry capsule; and removal of large space debris by a tether tow. Most space systems can be considered as a system of rigid bodies, with additional elastic and viscoelastic elements and fuel residuals in some cases. This guide shows the nature of the phenomena and explains the behavior of space objects. Researchers working on spacecraft attitude dynamics or space debris removal as well as those in the fields of mechanics, aerospace engineering, and aerospace science will benefit from this book. - Provides a complete treatise of modeling attitude for a range of novel and modern attitude control problems of spaceflight mechanics - Features chapters on the application of rigid body dynamics to atmospheric re-entries, tethered assisted re-entry, and tethered space debris removal - Shows relatively simple ways of constructing mathematical models and analytical solutions describing the behavior of very complex material systems - Uses modern methods of regular and chaotic dynamics to obtain results
Download or read book An Introduction to Sandwich Construction written by Dan Zenkert and published by Twayne Publishers. This book was released on 1995 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modal Analysis and Testing written by Júlio M. Montalvão e Silva and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Study Institute, Sesimbra, Portugal, 3-15 May, 1998
Download or read book Spacecraft Structures Materials and Mechanical Testing written by Jun Qiao Xiong and published by Trans Tech Publications Ltd. This book was released on 2013-02-13 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2012 International Conference on Spacecraft Structures, Materials and Mechanical Testing (ICSSMMT 2012),December 27-28, 2012, Xiamen, China
Download or read book Spacecraft Dynamics and Control written by Marcel J. Sidi and published by Cambridge University Press. This book was released on 2000-07-03 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Satellites are used increasingly in telecommunications, scientific research, surveillance, and meteorology, and these satellites rely heavily on the effectiveness of complex onboard control systems. This 1997 book explains the basic theory of spacecraft dynamics and control and the practical aspects of controlling a satellite. The emphasis throughout is on analyzing and solving real-world engineering problems. For example, the author discusses orbital and rotational dynamics of spacecraft under a variety of environmental conditions, along with the realistic constraints imposed by available hardware. Among the topics covered are orbital dynamics, attitude dynamics, gravity gradient stabilization, single and dual spin stabilization, attitude maneuvers, attitude stabilization, and structural dynamics and liquid sloshing.
Download or read book Quaternions and Rotation Sequences written by J. B. Kuipers and published by Princeton University Press. This book was released on 2020-03-31 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ever since the Irish mathematician William Rowan Hamilton introduced quaternions in the nineteenth century--a feat he celebrated by carving the founding equations into a stone bridge--mathematicians and engineers have been fascinated by these mathematical objects. Today, they are used in applications as various as describing the geometry of spacetime, guiding the Space Shuttle, and developing computer applications in virtual reality. In this book, J. B. Kuipers introduces quaternions for scientists and engineers who have not encountered them before and shows how they can be used in a variety of practical situations. The book is primarily an exposition of the quaternion, a 4-tuple, and its primary application in a rotation operator. But Kuipers also presents the more conventional and familiar 3 x 3 (9-element) matrix rotation operator. These parallel presentations allow the reader to judge which approaches are preferable for specific applications. The volume is divided into three main parts. The opening chapters present introductory material and establish the book's terminology and notation. The next part presents the mathematical properties of quaternions, including quaternion algebra and geometry. It includes more advanced special topics in spherical trigonometry, along with an introduction to quaternion calculus and perturbation theory, required in many situations involving dynamics and kinematics. In the final section, Kuipers discusses state-of-the-art applications. He presents a six degree-of-freedom electromagnetic position and orientation transducer and concludes by discussing the computer graphics necessary for the development of applications in virtual reality.
Download or read book Spacecraft Systems Engineering written by Peter Fortescue and published by Wiley. This book was released on 2003 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following on from the hugely successful previous editions, the third edition of Spacecraft Systems Engineering incorporates the most recent technological advances in spacecraft and satellite engineering. With emphasis on recent developments in space activities, this new edition has been completely revised. Every chapter has been updated and rewritten by an expert engineer in the field, with emphasis on the bus rather than the payload. Encompassing the fundamentals of spacecraft engineering, the book begins with front-end system-level issues, such as environment, mission analysis and system engineering, and progresses to a detailed examination of subsystem elements which represent the core of spacecraft design - mechanical, electrical, propulsion, thermal, control etc. This quantitative treatment is supplemented by an appreciation of the interactions between the elements, which deeply influence the process of spacecraft systems design. In particular the revised text includes * A new chapter on small satellites engineering and applications which has been contributed by two internationally-recognised experts, with insights into small satellite systems engineering. * Additions to the mission analysis chapter, treating issues of aero-manouevring, constellation design and small body missions. In summary, this is an outstanding textbook for aerospace engineering and design students, and offers essential reading for spacecraft engineers, designers and research scientists. The comprehensive approach provides an invaluable resource to spacecraft manufacturers and agencies across the world.
Download or read book Handbook of Space Technology written by Wilfried Ley and published by John Wiley & Sons. This book was released on 2009-03-18 with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twenty years since the first edition was published in the German language, and just over fifty years since the launch of the Earth’s first ever artificial satellite Sputnik 1, this third edition of the Handbook of Space Technology presents in fully integrated colour a detailed insight into the fascinating world of space for the first time in the English language. Authored by over 70 leading experts from universities, research institutions and the space industry, this comprehensive handbook describes the processes and methodologies behind the development, construction, operation and utilization of space systems, presenting the profound changes that have occurred in recent years in the engineering, materials, processes and even politics associated with space technologies and utilization. The individual chapters are self-contained, enabling the reader to gain a quick and reliable overview of a selected field; an extensive reference and keyword list helps those who wish to deepen their understanding of individual topics. Featuring superb, full colour illustrations and photography throughout, this interdisciplinary reference contains practical, hands-on engineering and planning information that will be invaluable to those on a career path within space technology, or simply for those of us who’d like to know more about this fascinating industry. Main section headings include: Introduction (historical overview, space missions) Fundamentals (orbital mechanics, aerothermodynamics/ reentry, space debris) Launch Vehicles (staged technologies, propulsion systems, launch infrastructure) Space Vehicle Subsystems (structure, energy supply, thermal controls, attitude control, communication) Aspects of Human Flight (man in space, life support systems, rendezvous and docking) Mission Operations (satellite operation, control center, ground station network) Utilization of Space (Earth observation, communication navigation, space astronomy, material sciences, space medicine, robotics) Configuration and Design of a Space Vehicle (mission concept, system concept, environmental simulation, system design, Galileo satellites) Management of Space Missions (project management, quality management, cost management, space law)
Download or read book Introduction to Dynamics and Control of Flexible Structures written by John L. Junkins and published by AIAA. This book was released on 1993 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Sensitivity Analysis and Parametric Programming written by Tomas Gal and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: The standard view of Operations Research/Management Science (OR/MS) dichotomizes the field into deterministic and probabilistic (nondeterministic, stochastic) subfields. This division can be seen by reading the contents page of just about any OR/MS textbook. The mathematical models that help to define OR/MS are usually presented in terms of one subfield or the other. This separation comes about somewhat artificially: academic courses are conveniently subdivided with respect to prerequisites; an initial overview of OR/MS can be presented without requiring knowledge of probability and statistics; text books are conveniently divided into two related semester courses, with deterministic models coming first; academics tend to specialize in one subfield or the other; and practitioners also tend to be expert in a single subfield. But, no matter who is involved in an OR/MS modeling situation (deterministic or probabilistic - academic or practitioner), it is clear that a proper and correct treatment of any problem situation is accomplished only when the analysis cuts across this dichotomy.
Download or read book Stability of Motion written by Edward John Routh and published by Taylor & Francis Group. This book was released on 1975 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
