Download or read book Dynamics and Control of Nuclear Reactors written by Thomas W. Kerlin and published by Academic Press. This book was released on 2019-10-05 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamics and Control of Nuclear Reactors presents the latest knowledge and research in reactor dynamics, control and instrumentation; important factors in ensuring the safe and economic operation of nuclear power plants. This book provides current and future engineers with a single resource containing all relevant information, including detailed treatments on the modeling, simulation, operational features and dynamic characteristics of pressurized light-water reactors, boiling light-water reactors, pressurized heavy-water reactors and molten-salt reactors. It also provides pertinent, but less detailed information on small modular reactors, sodium fast reactors, and gas-cooled reactors. - Provides case studies and examples to demonstrate learning through problem solving, including an analysis of accidents at Three Mile Island, Chernobyl and Fukushima Daiichi - Includes MATLAB codes to enable the reader to apply the knowledge gained to their own projects and research - Features examples and problems that illustrate the principles of dynamic analysis as well as the mathematical tools necessary to understand and apply the analysis Publishers Note: Table 3.1 has been revised and will be included in future printings of the book with the following data: Group Decay Constant, li (sec-1) Delayed Neutron Fraction (bi) 1 0.0124 0.000221 2 0.0305 0.001467 3 0.111 0.001313 4 0.301 0.002647 5 1.14 0.000771 6 3.01 0.000281 Total delayed neutron fraction: 0.0067

Download or read book An Introduction to Nuclear Fission written by Walid Younes and published by Springer Nature. This book was released on 2021-11-15 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This hands-on textbook introduces physics and nuclear engineering students to the experimental and theoretical aspects of fission physics for research and applications through worked examples and problem sets. The study of nuclear fission is currently undergoing a renaissance. Recent advances in the field create the opportunity to develop more reliable models of fission predictability and to supply measurements and data to critical applications including nuclear energy, national security and counter-proliferation, and medical isotope production. An Introduction to Nuclear Fission provides foundational knowledge for the next generation of researchers to contribute to nuclear fission physics.

Download or read book Advances of Computational Fluid Dynamics in Nuclear Reactor Design and Safety Assessment written by Jyeshtharaj Joshi and published by Woodhead Publishing. This book was released on 2019-06-11 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances of Computational Fluid Dynamics in Nuclear Reactor Design and Safety Assessment presents the latest computational fluid dynamic technologies. It includes an evaluation of safety systems for reactors using CFD and their design, the modeling of Severe Accident Phenomena Using CFD, Model Development for Two-phase Flows, and Applications for Sodium and Molten Salt Reactor Designs. Editors Joshi and Nayak have an invaluable wealth of experience that enables them to comment on the development of CFD models, the technologies currently in practice, and the future of CFD in nuclear reactors. Readers will find a thematic discussion on each aspect of CFD applications for the design and safety assessment of Gen II to Gen IV reactor concepts that will help them develop cost reduction strategies for nuclear power plants.

Download or read book Introductory Nuclear Reactor Dynamics written by Karl Otto Ott and published by . This book was released on 1985 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents the theory and methods of prediction that are the heart of nuclear reactor safety. Time-dependent reactor behavior is explained in both mathematical and physical terms. This book also explains the logic behind the working formulas and calculational methods for reactor transients and illustrates typical dynamic responses. The classical concept of point kinetics is developed in three steps, with discussion of various solutions to kinetics problems. Each chapter includes homework problems and review questions.

Download or read book Theory of Nuclear Fission written by Hans J. Krappe and published by Springer Science & Business Media. This book was released on 2012-02-06 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together various aspects of the nuclear fission phenomenon discovered by Hahn, Strassmann and Meitner almost 70 years ago. Beginning with an historical introduction the authors present various models to describe the fission process of hot nuclei as well as the spontaneous fission of cold nuclei and their isomers. The role of transport coefficients, like inertia and friction in fission dynamics is discussed. The effect of the nuclear shell structure on the fission probability and the mass and kinetic energy distributions of the fission fragments is presented. The fusion-fission process leading to the synthesis of new isotopes including super-heavy elements is described. The book will thus be useful for theoretical and experimental physicists, as well as for graduate and PhD students.

Download or read book Fractional Calculus with Applications for Nuclear Reactor Dynamics written by Santanu Saha Ray and published by CRC Press. This book was released on 2015-07-29 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces Novel Applications for Solving Neutron Transport EquationsWhile deemed nonessential in the past, fractional calculus is now gaining momentum in the science and engineering community. Various disciplines have discovered that realistic models of physical phenomenon can be achieved with fractional calculus and are using them in numerous way

Download or read book Advances in Time Dependent Methods for Nuclear Structure and Dynamics written by Paul Denis Stevenson and published by Frontiers Media SA. This book was released on 2021-03-08 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nuclear Reactor Analysis written by James J. Duderstadt and published by Wiley. This book was released on 1991-01-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Classic textbook for an introductory course in nuclear reactor analysis that introduces the nuclear engineering student to the basic scientific principles of nuclear fission chain reactions and lays a foundation for the subsequent application of these principles to the nuclear design and analysis of reactor cores. This text introduces the student to the fundamental principles governing nuclear fission chain reactions in a manner that renders the transition to practical nuclear reactor design methods most natural. The authors stress throughout the very close interplay between the nuclear analysis of a reactor core and those nonnuclear aspects of core analysis, such as thermal-hydraulics or materials studies, which play a major role in determining a reactor design.

Download or read book Understanding the Dynamics of Nuclear Power and the Reduction of CO2 Emissions written by Hassan Qudrat-Ullah and published by Springer Nature. This book was released on 2022-05-14 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This books explains a strategy that a country can meet its CO2 emission reduction targets (e.g., as are in Paris Agreement) with a dominant share of nuclear power with a balanced energy supply mix. The book starts with an introduction to the subject of energy policy, mechanisms, and CO2 emissions, and the complexity of the CO2 reduction goal. It introduces the system dynamics approach as a solution modeling approach for dealing with the complexity of CO2 reducing policies and mechanisms. The book presents the dynamic model and its key parameters and then elaborates the structural and behavioral validity of the dynamic model. The book gives an intensive review to do that comparative analysis involving China, India, Saudi Arabia, UAE, and Pakistan. The last half of the book focuses on the case in Pakistan. The author reviews Pakistan’s Intended Nationally Determined Contribution and other key sources from Pakistan’s Ministry of Energy and related institutions. Using Pakistan’s case data, the author applies the system dynamics modeling approach whereby a dynamic model, capable of representing the important interactions among various sectors of the electricity supply sector of Pakistan. This book is intended to be of use to policymakers, managers and practitioners, teachers, researchers, and students of design and assessment of policymaking for the complex, dynamic energy systems

Download or read book Thermal Hydraulic Analysis of Nuclear Reactors written by Bahman Zohuri and published by Springer. This book was released on 2017-05-23 with total page 845 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised text covers the fundamentals of thermodynamics required to understand electrical power generation systems and the application of these principles to nuclear reactor power plant systems. The book begins with fundamental definitions of units and dimensions, thermodynamic variables and the Laws of Thermodynamics progressing to sections on specific applications of the Brayton and Rankine cycles for power generation and projected reactor systems design issues. It is not a traditional general thermodynamics text, per se, but a practical thermodynamics volume intended to explain the fundamentals and apply them to the challenges facing actual nuclear power plants systems, where thermal hydraulics comes to play. There have been significant new findings for intercooled systems since the previous edition published and they will be included in this volume. New technology plans for using a Nuclear Air-Brayton as a storage system for a low carbon grid are presented along with updated component sizes and performance criteria for Small Modular Reactors. Written in a lucid, straight-forward style while retaining scientific rigor, the content is accessible to upper division undergraduate students and aimed at practicing engineers in nuclear power facilities and engineering scientists and technicians in industry, academic research groups, and national laboratories. The book is also a valuable resource for students and faculty in various engineering programs concerned with nuclear reactors.

Download or read book Neutronic Analysis For Nuclear Reactor Systems written by Bahman Zohuri and published by Springer. This book was released on 2016-11-01 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the entire spectrum of the science and technology of nuclear reactor systems, from underlying physics, to next generation system applications and beyond. Beginning with neutron physics background and modeling of transport and diffusion, this self-contained learning tool progresses step-by-step to discussions of reactor kinetics, dynamics, and stability that will be invaluable to anyone with a college-level mathematics background wishing to develop an understanding of nuclear power. From fuels and reactions to full systems and plants, the author provides a clear picture of how nuclear energy works, how it can be optimized for safety and efficiency, and why it is important to the future.

Download or read book Energy Abstracts for Policy Analysis written by and published by . This book was released on 1984 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the Third Conference on Reactions between Complex Nuclei written by Albert Ghiorso and published by Univ of California Press. This book was released on 2023-11-15 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title is part of UC Press's Voices Revived program, which commemorates University of California Press’s mission to seek out and cultivate the brightest minds and give them voice, reach, and impact. Drawing on a backlist dating to 1893, Voices Revived makes high-quality, peer-reviewed scholarship accessible once again using print-on-demand technology. This title was originally published in 1963.

Download or read book Risk and Safety Analysis of Nuclear Systems written by John C. Lee and published by John Wiley & Sons. This book was released on 2011-07-05 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book has been developed in conjunction with NERS 462, a course offered every year to seniors and graduate students in the University of Michigan NERS program. The first half of the book covers the principles of risk analysis, the techniques used to develop and update a reliability data base, the reliability of multi-component systems, Markov methods used to analyze the unavailability of systems with repairs, fault trees and event trees used in probabilistic risk assessments (PRAs), and failure modes of systems. All of this material is general enough that it could be used in non-nuclear applications, although there is an emphasis placed on the analysis of nuclear systems. The second half of the book covers the safety analysis of nuclear energy systems, an analysis of major accidents and incidents that occurred in commercial nuclear plants, applications of PRA techniques to the safety analysis of nuclear power plants (focusing on a major PRA study for five nuclear power plants), practical PRA examples, and emerging techniques in the structure of dynamic event trees and fault trees that can provide a more realistic representation of complex sequences of events. The book concludes with a discussion on passive safety features of advanced nuclear energy systems under development and approaches taken for risk-informed regulations for nuclear plants.

Download or read book Physics of Nuclear Reactors written by P. Mohanakrishnan and published by Elsevier. This book was released on 2021-05-19 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics of Nuclear Reactors presents a comprehensive analysis of nuclear reactor physics. Editors P. Mohanakrishnan, Om Pal Singh, and Kannan Umasankari and a team of expert contributors combine their knowledge to guide the reader through a toolkit of methods for solving transport equations, understanding the physics of reactor design principles, and developing reactor safety strategies. The inclusion of experimental and operational reactor physics makes this a unique reference for those working and researching nuclear power and the fuel cycle in existing power generation sites and experimental facilities. The book also includes radiation physics, shielding techniques and an analysis of shield design, neutron monitoring and core operations. Those involved in the development and operation of nuclear reactors and the fuel cycle will gain a thorough understanding of all elements of nuclear reactor physics, thus enabling them to apply the analysis and solution methods provided to their own work and research. This book looks to future reactors in development and analyzes their status and challenges before providing possible worked-through solutions. Cover image: Kaiga Atomic Power Station Units 1 - 4, Karnataka, India. In 2018, Unit 1 of the Kaiga Station surpassed the world record of continuous operation, at 962 days. Image courtesy of DAE, India. Includes methods for solving neutron transport problems, nuclear cross-section data and solutions of transport theory Dedicates a chapter to reactor safety that covers mitigation, probabilistic safety assessment and uncertainty analysis Covers experimental and operational physics with details on noise analysis and failed fuel detection

Download or read book Proceedings of The 20th Pacific Basin Nuclear Conference written by Hong Jiang and published by Springer. This book was released on 2017-01-29 with total page 901 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second in a series of three proceedings of the 20th Pacific Basin Nuclear Conference (PBNC). This volume covers the topics of Operation and Maintenance, Supply Capability and Quality Control, Fuel Cycles, as well as New Technology and New Applications. As one in the most important and influential conference series of nuclear science and technology, the 20th PBNC was held in Beijing and the theme of this meeting was “Nuclear: Powering the Development of the Pacific Basin and the World”. It brought together outstanding nuclear scientist and technical experts, senior industry executives, senior government officials and international energy organization leaders from all across the world. The book is not only a good summary of the new developments in the field, but also a useful guideline for the researchers, engineers and graduate students.

Download or read book Risk informed Methods and Applications in Nuclear and Energy Engineering written by Curtis Smith and published by Academic Press. This book was released on 2023-11-16 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk-informed Methods and Applications in Nuclear and Energy Engineering: Modelling, Experimentation, and Validation presents a comprehensive view of the latest technical approaches and experimental capabilities in nuclear energy engineering. Based on Idaho National Laboratory's popular summer school series, this book compiles a collection of entries on the cutting-edge research and knowledge presented by proponents and developers of current and future nuclear systems, focusing on the connection between modelling and experimental approaches. Included in this book are key topics such as probabilistic concepts for risk analysis, the survey of legacy reliability and risk analysis tools, and newly developed tools supporting dynamic probabilistic risk-assessment. This book is an insightful and inspiring compilation of work from top nuclear experts from INL. Industry professionals, researchers and academics working in nuclear engineering, safety, operations and training will gain a board picture of the current state-of-practice and be able to apply that to their own risk-assessment studies. - Based on Idaho National Laboratory's summer school series, this book is a collection of entries from proponents and developers of current and future nuclear systems - Provides an up-to-date view of current technical approaches and experimental capabilities in nuclear energy engineering, covering modeling and validation, and focusing on risk-informed methods and applications - Equips the reader with an understanding of various case studies and experimental validations to enable them to carry out a risk-assessment study