Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 32 (thesis year 1987) a total of 12,483 theses titles from 22 Canadian and 176 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 32 reports theses submitted in 1987, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.

Download or read book Science and Technology of Rubber written by James E. Mark and published by Elsevier. This book was released on 2011-07-28 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science and Technology of Rubber, Third Edition provides a broad survey of elastomers with special emphasis on materials with a rubber-like elasticity. As in the 2nd edition, the emphasis remains on a unified treatment of the material; exploring topics from the chemical aspects such as elastomer synthesis and curing, through recent theoretical developments and characterization of equilibrium and dynamic properties, to the final applications of rubber, including tire engineering and manufacturing. Many advances have been made in polymer and elastomers research over the past ten years since the 2nd edition was published. Updated material stresses the continuous relationship between the ongoing research in synthesis, physics, structure and mechanics of rubber technology and industrial applications. Special attention is paid to recent advances in rubber-like elasticity theory and new processing techniques for elastomers. This new edition is comprised of 20% new material, including a new chapter on environmental issues and tire recycling.

Download or read book Polypropylene Structure blends and Composites written by J. Karger-Kocsis and published by Springer Science & Business Media. This book was released on 1994-12-31 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although polypropylene has been marketed since the 1950s, research and development in this area is still vigorous. The consumption of polypropylene over the years has been relatively high, mainly due to the steady improvement of its property profile. Polypropylene: Structures, Blends and Composites, in three separate volumes, reflects on the key factors which have contributed to the success of polypropylene, dealing with all aspects of structure-performance relationships relevant to thermoplastic polymers and related composites. Volume 1, Structure and Morphology, deals with polymorphism in polypropylene homo- and copolymers, where molecular and supermolecular structures are covered, and the processing-induced structure development of polypropylene, showing the interrelation between the processing-induced morphology and mechanical performance. Volume 2, Copolymers and Blends, contains comprehensive surveys of the nucleation and crystallisation behaviour of the related systems. It includes the development of morphology and its effects on rheological and mechanical properties of polypropylene-based alloys and blends and a review of polypropylene-based thermoplastic elastomers. Volume 3, Composites, gives a comprehensive overview of filled and reinforced systems with polypropylene as a matrix material, with the main emphasis on processing-structure-property-interrelationships. Chapters cover all aspects of particulate filled, chopped fibre-, fibre mat- and continuous fibre-reinforced composites. Interfacial phenomena, such as adhesion, wetting and interfacial crystallisation, are also included as important aspects of this subject.

Download or read book Blends of Natural Rubber written by K.C. Jones and published by Springer Science & Business Media. This book was released on 1997-12-31 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Blends of natural rubber with speciality synthetic rubbers, such as nitrile rubber and ethylene propylene rubbers, have, in the past, failed to combine the best properties of polymers, resulting in a poor return in terms of added value from the blending process. The idea of blending synthetic rubbers with natural rubbe is certainly not a new one, but it is only now that this can be shown to be possible with consistently positive resluts, but eh use of novel techniques which this book describes, giving valuable information on the technology required and the results which can be achieved. Blends of Natural Rubber is an invaluable source of information for all those working in the area of rubber technology and polymer blend technology.

Download or read book Reverse Engineering of Rubber Products written by Saikat Das Gupta and published by CRC Press. This book was released on 2013-09-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reverse engineering is widely practiced in the rubber industry. Companies routinely analyze competitors’ products to gather information about specifications or compositions. In a competitive market, introducing new products with better features and at a faster pace is critical for any manufacturer. Reverse Engineering of Rubber Products: Concepts, Tools, and Techniques explains the principles and science behind rubber formulation development by reverse engineering methods. The book describes the tools and analytical techniques used to discover which materials and processes were used to produce a particular vulcanized rubber compound from a combination of raw rubber, chemicals, and pigments. A Compendium of Chemical, Analytical, and Physical Test Methods Organized into five chapters, the book first reviews the construction of compounding ingredients and formulations, from elastomers, fillers, and protective agents to vulcanizing chemicals and processing aids. It then discusses chemical and analytical methods, including infrared spectroscopy, thermal analysis, chromatography, and microscopy. It also examines physical test methods for visco-elastic behavior, heat aging, hardness, and other features. A chapter presents important reverse engineering concepts. In addition, the book includes a wide variety of case studies of formula reconstruction, covering large products such as tires and belts as well as smaller products like seals and hoses. Get Practical Insights on Reverse Engineering from the Book’s Case Studies Combining scientific principles and practical advice, this book brings together helpful insights on reverse engineering in the rubber industry. It is an invaluable reference for scientists, engineers, and researchers who want to produce comparative benchmark information, discover formulations used throughout the industry, improve product performance, and shorten the product development cycle.

Download or read book Reactive Extrusion written by Günter Beyer and published by John Wiley & Sons. This book was released on 2018-01-03 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first comprehensive overview of reactive extrusion technology for over a decade combines the views of contributors from both academia and industry who share their experiences and highlight possible applications and markets. They also provide updated information on the underlying chemical and physical concepts, summarizing recent developments in terms of the material and machinery used. As a result, readers will find here a compilation of potential applications for reactive extrusion to access new and cost-effective polymeric materials, while using existing compounding machines.

Download or read book Transport Properties of Polymeric Membranes written by Sabu Thomas and published by Elsevier. This book was released on 2017-11-20 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transport Properties of Polymeric Membranes is an edited collection of papers that covers, in depth, many of the recent technical research accomplishments in transport characteristics through polymers and their applications. Using the transport through polymer membranes method leads to high separation efficiency, low running costs, and simple operating procedures compared to conventional separation methods. This book provides grounding in fundamentals and applications to give you all the information you need on using this method. This book discusses the different types of polymer, their blends, composites, nanocomposites and their applications in the field of liquid, gas and vapor transport. Some topics of note include modern trends and applications of polymer nanocomposites in solvent, vapor and gas transport; fundamentals and measurement techniques for gas and vapor transport in polymers; and transport properties of hydrogels. This handpicked selection of topics, and the combined expertise of contributors from global industry, academia, government and private research organizations, make this book an outstanding reference for anyone involved in the field of polymer membranes. - Presents current trends in the field of transport of liquid, gas and vapor through various polymeric systems - Features case studies focused on industrial applications of membrane technology, along with fundamentals of transport and materials - Helps readers quickly look up a particular technique to learn key points, capabilities and drawbacks

Download or read book Rubber Nano Blends written by Gordana Markovic and published by Springer. This book was released on 2016-11-25 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the preparation, characterization and applications of rubber based nano blends. Rubbers from natural and synthetic polymers and their blends are discussed in the individual chapters, including nitrile, polyurethane, chlorosulphonated, polybutadiene, styrene butadiene, polychloroprene rubbers. In each chapter, contributors from academia and industry describe the preparation and characterization of the rubber blends. Therefore, a variety of characterization methods like tensile testing, differential scanning calorimetry, dynamical mechanical analysis, thermogravimetric analysis, electron microscopy, scattering and diffraction techniques, and rheology measurements are utilized. The authors evaluate the properties of the different materials and discuss numerous fields of application, ranging from biomedicine, packaging, coatings and automobile to aerospace.

Download or read book Progress in Rubber Nanocomposites written by Sabu Thomas and published by Woodhead Publishing. This book was released on 2016-10-27 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in Rubber Nanocomposites provides an up-to-date review on the latest advances and developments in the field of rubber nanocomposites. It is intended to serve as a one-stop reference resource to showcase important research accomplishments in the area of rubber nanocomposites, with particular emphasis on the use of nanofillers. Chapters discuss major progress in the field and provide scope for further developments that will have an impact in the industrial research area. Global leaders and researchers from industry, academia, government, and private research institutions contribute valuable information. - A one-stop reference relating to the processing and characterization of rubber nanocomposites - Presents the morphological, thermal, and mechanical properties that are discussed in detail - Contains key highlights in the form of dedicated chapters on interphase characterization, applications, and computer simulation

Download or read book Encyclopedia of Polymer Blends Volume 3 written by Avraam I. Isayev and published by John Wiley & Sons. This book was released on 2016-09-13 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete and timely overview of the topic, this Encyclopedia imparts knowledge of fundamental principles and their applications for academicians, scientists and researchers, while informing engineers, industrialists and entrepreneurs of the current state of the technology and its utilization. The most comprehensive source on polymer blends available on the market Offers a complete and timely overview of the topic Each article presents up to date research & development on a topic and its basic principles and applications, integrates case studies, laboratory and pilot plant experiments, and gives due reference to published and patented literature Equips academics, scientists and researchers with knowledge of fundamentals principles and their applications, and informs the engineers, industrialists and entrepreneurs about the state of the art technology and its applications

Download or read book Rubber Technology written by M. Morton and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: About ten years after the publication of the Second Edition (1973), it became apparent that it was time for an up-date of this book. This was especially true in this case, since the subject matter has traditionally dealt mainly with the structure, properties, and technology of the various elastomers used in industry, and these are bound to undergo significant changes over the period of a decade. In revising the contents of this volume, it was thought best to keep the orig inal format. Hence the first five chapters discuss the same general subject matter as before. The chapters dealing with natural rubber and the synthetic elastomers are up-dated, and an entirely new chapter has been added on the thermoplastic elastomers, which have, of course, grown tremendously in importance. Another innovation is the addition of a new chapter, "Miscellaneous Elastomers," to take care of "old" elastomers, e.g., polysulfides, which have decreased some what in importance, as well as to introduce some of the newly-developed syn thetic rubbers which have not yet reached high production levels. The editor wishes to express his sincere appreciation to all the contributors, without whose close cooperation this task would have been impossible. He would especially like to acknowledge the invaluable assistance of Dr. Howard Stephens in the planning of this book, and for his suggestion of suitable authors.

Download or read book Characterization of Polymer Blends written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the gap for a reference dedicated to the characterization of polymer blends and their micro and nano morphologies, this book provides comprehensive, systematic coverage in a one-stop, two-volume resource for all those working in the field. Leading researchers from industry and academia, as well as from government and private research institutions around the world summarize recent technical advances in chapters devoted to their individual contributions. In so doing, they examine a wide range of modern characterization techniques, from microscopy and spectroscopy to diffraction, thermal analysis, rheology, mechanical measurements and chromatography. These methods are compared with each other to assist in determining the best solution for both fundamental and applied problems, paying attention to the characterization of nanoscale miscibility and interfaces, both in blends involving copolymers and in immiscible blends. The thermodynamics, miscibility, phase separation, morphology and interfaces in polymer blends are also discussed in light of new insights involving the nanoscopic scale. Finally, the authors detail the processing-morphology-property relationships of polymer blends, as well as the influence of processing on the generation of micro and nano morphologies, and the dependence of these morphologies on the properties of blends. Hot topics such as compatibilization through nanoparticles, miscibility of new biopolymers and nanoscale investigations of interfaces in blends are also addressed. With its application-oriented approach, handpicked selection of topics and expert contributors, this is an outstanding survey for anyone involved in the field of polymer blends for advanced technologies.

Download or read book Raw Materials Supply Chain for Rubber Products written by John S. Dick and published by Hanser Pub Incorporated. This book was released on 2014-06-30 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rubber industry is a vital part of the world economy. In this age of constantly changing economics and raw material "shortages of the week," this book should help the reader understand the overall technical and economic problems that are emerging which are beginning to affect the overall availability of many raw materials, chemical intermediates and final rubber products on the world scene. This book is truly unique in that it is the only one that traces all the important organic and inorganic synthesis routes for the manufacture of synthetic rubbers, various fillers, plasticizers, oils, curatives, antidegradants, adhesion promoters, flame retardants, tackifiers, and blowing agents through their respective intermediates to the base raw materials from earth extractions and agriculture.

Download or read book Handbook of Specialty Elastomers written by Robert C. Klingender and published by CRC Press. This book was released on 2008-01-22 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written and edited by experts on specialty elastomers applications in the mechanical and automotive products industries, the Handbook of Specialty Elastomers provides a single source reference for the design of compounds using specialty elastomers. This book defines specialty elastomers as heat-, oil-, fuel-, and solvent-resistant polymer

Download or read book The Complete Book on Rubber Processing and Compounding Technology with Machinery Details 2nd Revised Edition written by NIIR Board of Consultants and Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2010-02-05 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: The production of rubber and rubber products is a large and diverse industry. The rubber product manufacturing industry is basically divided into two major sectors: tyre and non-tyre. The tyre sector produces all types of automotive and nonautomotive tyres whereas the non-tyre sector produces high technology and sophisticated products like conveyor belts , rubber seals etc. The wide range of rubber products manufactured by the rubber industry comprises all types of heavy duty earth moving tyres, auto tyres, tubes, automobile parts, footwear, beltings etc. The rubber industry has been growing tremendously over the years. The future of the rubber industry is tied to the global economy. Rapidly growing automotive sector in developing economies and increased demand for high-performance tyres are expected to contribute to the growth of the global industrial rubber market. The current scenario reveals that there is a tremendous scope for the development of rubber processing industries. The global market for industrial rubber products is projected to increase 5.8 % per year. Investment in rubber industry is expected to offer significant opportunities in the near future and realizing returns to investors willing to explore this sector. This book deals with all aspects of rubber processing; mixing, milling, extrusion and molding, reclaiming and manufacturing process of rubber products. The major contents of the book are rubbers materials and processing, mixing technology of rubber, techniques of vulcanization, rubber vulcanization, rubber compounding, rubber reclaiming, manufacture of rubber products, latex and foam rubber, silicone rubber, polybutadiene and polyisoprene, styrene butadiene rubber, rubber natural etc. The book contains addresses of plant & machinery suppliers with their Photographs. It will be a standard reference book for professionals, entrepreneurs, those studying and researching in this important area and others interested in the field of rubber processing technology. TAGS Basic compounding and processing of rubber, Best small and cottage scale industries, Business guidance for rubber processing, Business guidance for rubber compounding, Business guidance to clients, Business Plan for a Startup Business, Business plan on Rubber, Business start-up, How is rubber made?, How to Start a Rubber business?, How to Start a Rubber Production Business, How to start a successful Rubber Processing business, How to Start Rubber processing Business, How to Start Rubber Processing Industry in India, Manufacture of Rubber Products, Modern small and cottage scale industries, Most Profitable Rubber Processing Business Ideas, Natural Rubber Processing Line, Natural rubber processing method, Natural Rubber Processing, New small scale ideas in Rubber processing industry, Opportunities in Rubber industries for new business, Processing and Profiting from Rubber, Processing methods for rubber materials, Profitable Rubber Business Ideas Small Scale Manufacturing, Profitable small and cottage scale industries, Profitable Small Scale Rubber Manufacturing, Rubber and Rubber Products, Rubber based Industries processing, Rubber Based Small Scale Industries Projects, Rubber business plan, Rubber Chemistry, Rubber compounding, Rubber Compounding & Mixing, Rubber compounding ingredients, Rubber compounding method, Rubber compounding process, Rubber compounding technology, Rubber Extrusion, Rubber Materials, Rubber mixing process, Rubber Mixing, Rubber Principles, Rubber processing, Rubber Processing & Rubber Based Profitable Projects, Rubber Processing and Profiting, Rubber Processing Business, Rubber Processing Industry in India, Rubber processing methods, Rubber Processing Projects, Rubber processing technology, Rubber Products manufacturing, Rubber Products, Rubber Reclaiming, Rubber technology, Rubber Technology and Manufacturing Process of Rubber Products, Rubber Vulcanization, Rubbers: materials and processing technology, Setting up of Rubber Processing Units, Small scale manufacturing business in rubber industry, Small Scale Rubber Processing Projects, Small scale Rubber production line, Small Start-up Business Project, Start up India, Stand up India, Starting a Rubber Processing Business, Startup, Start-up Business Plan for Rubber Processing, Startup ideas, Startup Project, Startup Project for Rubber processing and compounding, Startup project plan, Steps in processing of rubber, Vulcanization of rubber, Vulcanization of rubber compounds, Vulcanized rubber properties, Rubber processing and compounding

Download or read book Rubber Curing Systems written by R. N. Datta and published by iSmithers Rapra Publishing. This book was released on 2002 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: This review discusses the different types of curing systems available today for different rubber types, including natural rubber, SBR, NBR, BR, IIR, CR, XIIR and EPDM. The uses of primary and secondary accelerators, prevulcanisation inhibitors (PVIs) and antireversion chemicals are outlined.Typical rubber formulations for applications in industrial rubber products and tyres are given. Cure systems are described and compared with extensive tables of data on formulae and compound properties. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database gives useful references for further reading.

Download or read book Encyclopedia of Polymer Blends Volume 3 written by Avraam I. Isayev and published by John Wiley & Sons. This book was released on 2016-06-07 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete and timely overview of the topic, this Encyclopedia imparts knowledge of fundamental principles and their applications for academicians, scientists and researchers, while informing engineers, industrialists and entrepreneurs of the current state of the technology and its utilization. The most comprehensive source on polymer blends available on the market Offers a complete and timely overview of the topic Each article presents up to date research & development on a topic and its basic principles and applications, integrates case studies, laboratory and pilot plant experiments, and gives due reference to published and patented literature Equips academics, scientists and researchers with knowledge of fundamentals principles and their applications, and informs the engineers, industrialists and entrepreneurs about the state of the art technology and its applications