Download or read book Dynamic Response of Granular and Porous Materials under Large and Catastrophic Deformations written by Kolumban Hutter and published by Springer Science & Business Media. This book was released on 2013-02-26 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: A "Sonderforschungsbereich" (SFB) is a programme of the "Deutsche For schungsgemeinschaft" to financially support a concentrated research effort of a number of scientists located principally at one University, Research La boratory or a number of these situated in close proximity to one another so that active interaction among individual scientists is easily possible. Such SFB are devoted to a topic, in our case "Deformation and Failure in Metallic and Granular M aterialK' , and financing is based on a peer reviewed proposal for three (now four) years with the intention of several prolongations after evaluation of intermediate progress and continuation reports. An SFB is terminated in general by a formal workshop, in which the state of the art of the achieved results is presented in oral or I and poster communications to which also guests are invited with whom the individual project investigators may have collaborated. Moreover, a research report in book form is produced in which a number of articles from these lectures are selected and collected, which present those research results that withstood a rigorous reviewing pro cess (with generally two or three referees). The theme deformation and failure of materials is presented here in two volumes of the Lecture Notes in Applied and Computational Mechanics by Springer Verlag, and the present volume is devoted to granular and porous continua. The complementary volume (Lecture Notes in Applied and Com putational Mechanics, vol. 10, Eds. K. HUTTER & H.
Download or read book Mathematical Modeling in Mechanics of Granular Materials written by Oxana Sadovskaya and published by Springer Science & Business Media. This book was released on 2012-06-08 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph contains original results in the field of mathematical and numerical modeling of mechanical behavior of granular materials and materials with different strengths. It proposes new models helping to define zones of the strain localization. The book shows how to analyze processes of the propagation of elastic and elastic-plastic waves in loosened materials, and constructs models of mixed type, describing the flow of granular materials in the presence of quasi-static deformation zones. In a last part, the book studies a numerical realization of the models on multiprocessor computer systems. The book is intended for scientific researchers, lecturers of universities, post-graduates and senior students, who specialize in the field of the deformable materials mechanics, mathematical modeling and adjacent fields of applied and calculus mathematics.
Download or read book Avalanche Dynamics written by S.P. Pudasaini and published by Springer Science & Business Media. This book was released on 2007-06-30 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: Avalanches, mudflows and landslides are common and natural phenomena that occur in mountainous regions. With an emphasis on snow avalanches, this book provides a survey and discussion about the motion of avalanche-like flows from initiation to run out. An important aspect of this book is the formulation and investigation of a simple but appropriate continuum mechanical model for the realistic prediction of geophysical flows of granular material.
Download or read book Static and Dynamic Coupled Fields in Bodies with Piezoeffects or Polarization Gradient written by Jerzy Nowacki and published by Springer Science & Business Media. This book was released on 2010-04-12 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the theory of coupled electro-magneto-thermo-elastic fields excited in different bodies by various sources, both static and dynamic. It presents the classical piezoelectric and piezomagnetic effects, the Mindlin’s electroelastic coupling due to a polarization gradient, and different combinations of these effects with thermoelasticity.
Download or read book Uncertainty Assessment of Large Finite Element Systems written by Christian A. Schenk and published by Springer Science & Business Media. This book was released on 2005-06-08 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: The treatment of uncertainties in the analysis of engineering structures remains one of the premium challenges in modern structural mechanics. It is only in recent years that the developments in stochastic and deterministic computational mechanics began to be synchronized. To foster these developments, novel computational procedures for the uncertainty assessment of large finite element systems are presented in this monograph. The stochastic input is modeled by the so-called Karhunen-Loève expansion, which is formulated in this context both for scalar and vector stochastic processes as well as for random fields. Particularly for strongly non-linear structures and systems the direct Monte Carlo simulation technique has proven to be most advantageous as method of solution. The capabilities of the developed procedures are demonstrated by showing some practical applications.
Download or read book An Introduction to Fluid Mechanics written by Chung Fang and published by Springer. This book was released on 2018-12-31 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides a concise introduction to the mathematical theory of fluid motion with the underlying physics. Different branches of fluid mechanics are developed from general to specific topics. At the end of each chapter carefully designed problems are assigned as homework, for which selected fully worked-out solutions are provided. This book can be used for self-study, as well as in conjunction with a course in fluid mechanics.
Download or read book Poromechanics III Biot Centennial 1905 2005 written by Younane N. Abousleiman and published by CRC Press. This book was released on 2005-05-01 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings represent the latest advances in the mechanics of porous materials, known as poromechanics. The porous materials considered are solids containing voids that are impregnated with fluid. The focus is on the mechanical interactions of the inhomogeneous solid with the single- or multi-phase fluid under the loading of mechanical force, fluid pressure, thermal, chemical, and magnetic fields. The response time can be in static, diffusional, and dynamic ranges. The length scale can start from nano, to micro, macro, and up to field scales. Its application covers many branches of science and engineering, including geophysics, geomechanics, composite materials, biomechanics, acoustics, seismicity, civil, mechanical, environmental, and petroleum engineering. The approaches taken include analytical, computational, and experimental. To honor the pioneering contributions of Maurice A. Biot (1905-1985) to poromechanics, the Biot Conference on Poromechanics was convened for the first time in Louvain-la-Neuve, Belgium in 1998. The success of the first conference led to the 2nd Biot Conference held in Grenoble, France in 2002. To celebrate the centennial birthday of Biot (May 25, 2005), the 3rd Biot Conference on Poromechanics was held at the University of Oklahoma, Norman, Oklahoma, U.S.A., on May 24-27, 2005.
Download or read book Mechanical System Dynamics written by Friedrich Pfeiffer and published by Springer Science & Business Media. This book was released on 2008-09-27 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics as a fundamental science in Physics and in Engineering deals with interactions of forces resulting in motion and deformation of material bodies. Similar to other sciences Mechanics serves in the world of Physics and in that of Engineering in a di?erent way, in spite of many and increasing inter- pendencies. Machines and mechanisms are for physicists tools for cognition and research, for engineers they are the objectives of research, according to a famous statement of the Frankfurt physicist and biologist Friedrich Dessauer. Physicists apply machines to support their questions to Nature with the goal of new insights into our physical world. Engineers apply physical knowledge to support the realization process of their ideas and their intuition. Physics is an analytical Science searching for answers to questions concerning the world around us. Engineering is a synthetic Science, where the physical and ma- ematical fundamentals play the role of a kind of reinsurance with respect to a really functioning and e?ciently operating machine. Engineering is also an iterative Science resulting in typical long-time evolutions of their products, but also in terms of the relatively short-time developments of improving an existing product or in developing a new one. Every physical or mathematical Science has to face these properties by developing on their side new methods, new practice-proved algorithms up to new fundamentals adaptable to new technological developments. This is as a matter of fact also true for the ?eld of Mechanics.
Download or read book Dynamics and Balancing of Multibody Systems written by Himanshu Chaudhary and published by Springer Science & Business Media. This book was released on 2008-09-27 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has evolved from the passionate desire of the authors in using the modern concepts of multibody dynamics for the design improvement of the machineries used in the rural sectors of India and The World. In this connection, the first author took up his doctoral research in 2003 whose findings have resulted in this book. It is expected that such developments will lead to a new research direction MuDRA, an acronym given by the authors to “Multibody Dynamics for Rural Applications. ” The way Mu- DRA is pronounced it means ‘money’ in many Indian languages. It is hoped that practicing MuDRA will save or generate money for the rural people either by saving energy consumption of their machines or making their products cheaper to manufacture, hence, generating more money for their livelihood. In this book, the initial focus was to improve the dynamic behavior of carpet scrapping machines used to wash newly woven hand-knotted c- pets of India. However, the concepts and methodologies presented in the book are equally applicable to non-rural machineries, be they robots or - tomobiles or something else. The dynamic modeling used in this book to compute the inertia-induced and constraint forces for the carpet scrapping machine is based on the concept of the decoupled natural orthogonal c- plement (DeNOC) matrices. The concept is originally proposed by the second author for the dynamics modeling and simulation of serial and - rallel-type multibody systems, e. g.
Download or read book Dynamics of the Axially Moving Orthotropic Web written by Krzysztof Marynowski and published by Springer Science & Business Media. This book was released on 2010-07-07 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: A material continuum moving axially at high speed can be met in numerous different technical applications. These comprise band saws, web papers during manufacturing, processing and printing processes, textile bands during manufacturing and processing, pipes transporting fluids, transmission belts as well as flat objects moving at high speeds in space. In all these so varied technical applications, the maximum transport speed or the transportation speed is aimed at in order to increase efficiency and optimize investment and performance costs of sometimes very expensive and complex machines and installations. The dynamic behavior of axially moving systems very often hinders from reaching these aims. The book is devoted to dynamics of axially moving material objects of low flexural stiffness that are referred to as webs. Webs are moving at high speed, for example, in paper production the paper webs are transported with longitudinal speeds of up to 3000 m/min. Above the critical speed one can expect various dynamical instabilities mainly of divergent and flutter type. The up-to-date state of investigations conducted in the field of the axially moving system dynamics is presented in the beginning of the book. Special attention is paid on nonlinear dynamic investigations of translating systems. In the next chapters various mathematical models that can be employed in dynamic investigations of such objects and the results of analysis of the dynamic behavior of the axially moving orthotropic material web are presented. To make tracing the dynamic considerations easier, a paper web is the main object of investigations in the book.
Download or read book Continuous Media with Microstructure written by Bettina Albers and published by Springer Science & Business Media. This book was released on 2010-03-15 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the extension of classical continuum models. To the first class addressed belong various thermodynamic models of multicomponent systems, and to the second class belong primarily microstructures created by phase transformations.
Download or read book Multifield Problems in Solid and Fluid Mechanics written by Rainer Helmig and published by Springer Science & Business Media. This book was released on 2006-11-28 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an overview of the research projects within the SFB 404 "Mehrfeldprobleme in der Kontinuumsmechanik". The book is for researchers and graduate students in applied mechanics and civil engineering.
Download or read book Discrete Element Analysis Methods of Generic Differential Quadratures written by Chang-New Chen and published by Springer Science & Business Media. This book was released on 2008-09-12 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the advance in computer technology, the numerical technique has made signi?cant progress in the past decades. Among the major techniques available for numerically analyzing continuum mechanics problems, ?nite d- ference method is most early developed. It is di?cult to deal with cont- uum mechanics problems showing complex curvilinear geometries by using this method. The other method that can consistently discretize continuum mechanics problems showing arbitrarily complex geometries is ?nite element method. In addition, boundary element method is also a useful numerical method. In the past decade, the di?erential quadrature and generic di?erential quadraturesbaseddiscreteelementanalysismethodshavebeendevelopedand usedto solve various continuum mechanics problems. These methods have the same advantage as ?nite element method of consistently discretizing cont- uum mechanics problems having arbitrarily complex geometries. This book includes my research results obtained in developing the related novel discrete element analysis methods using both of the extended di?erential quadrature based spacial and temporal elements. It is attempted to introduce the dev- oped numerical techniques as applied to the solution of various continuum mechanics problems, systematically.
Download or read book Analysis and Simulation of Contact Problems written by Peter Wriggers and published by Springer Science & Business Media. This book was released on 2006-08-15 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: This carefully edited book offers a state-of-the-art overview on formulation, mathematical analysis and numerical solution procedures of contact problems. The contributions collected in this volume summarize the lectures presented by leading scientists in the area of contact mechanics, during the 4th Contact Mechanics International Symposium (CMIS) held in Hannover, Germany, 2005.
Download or read book Shallow Geophysical Mass Flows down Arbitrary Topography written by Ioana Luca and published by Springer. This book was released on 2016-02-02 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geophysical mass flows, such as landslides, avalanches or debris flows, are frequent mass movement processes in mountain areas and often cause disastrous damage. This book lays a foundation for formulating the depth-averaged equations describing the shallow geophysical mass flows over non-trivial topography. It consists of the detailed derivation of the model equations. The stimulating numerical examples demonstrate how the proposed models are applied. All this make this book accessible to a wide variety of readers, especially senior undergraduate and graduate students of fluid mechanics, civil engineering, applied mathematics, engineering geology, geophysics or engineers who are responsible for hazard management.
Download or read book Mechanical Modelling and Computational Issues in Civil Engineering written by Michel Fremond and published by Springer Science & Business Media. This book was released on 2006-07-16 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this edited book various novel approaches to problems of modern civil engineering are demonstrated. Experts associated within the Lagrange Laboratory present recent research results in civil engineering dealing both with modelling and computational aspects. Many modern topics are covered, such as monumental dams, soil mechanics and geotechnics, granular media, contact and friction problems, damage and fracture, new structural materials, and vibration damping – presenting the state of the art of mechanical modelling and computational issues in civil engineering.
Download or read book Boundary Element Analysis written by Martin Schanz and published by Springer Science & Business Media. This book was released on 2007-04-29 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains eleven contributions on boundary integral equation and boundary element methods. Beside some historical and more analytical aspects in the formulation and analysis of boundary integral equations, modern fast boundary element methods are also described and analyzed from a mathematical point of view. In addition, the book presents engineering and industrial applications that show the ability of boundary element methods to solve challenging problems from different fields.
