Download or read book Dynamic Modelling of Crude Distillation Unit written by Weng Khim Tan and published by . This book was released on 2013 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is rapid growth in the usage and demand of crude oil in various industrial fields. Thus, the price of the petrol is rising due to the stronger-than-expected demand for petroleum products. With the available information, most of the modeling models used today is only steady state models. The procedure for this work was firstly forming a mathematical model for the theoretical stage of the column. Then based on the partial equation obtained, the relationship between input variable and output variable was studied. After that, Aspen Plus simulation of CDU was run in steady state mode and the results obtained was studied. Next, a dynamic simulation of CDU in Aspen Plus Dynamic was run and the dynamic behavior of CDU model was studied based on the results obtained. Based on the result obtained from steady state simulation, it was proven that the change of energy balance of the column lead to a change in the mass balance of the column. As the conclusion the dynamic simulation results shown on all the changes of process variable with respect to time until the system stability achieved. A good dynamic model is necessary to develop a proper control strategy. Thus, this work was very helpful in understanding dynamic behaviour of CDU and used to increase the efficiency of refining process which also increases the yield of the product.
Download or read book Petroleum Refinery Process Modeling written by Y. A. Liu and published by John Wiley & Sons. This book was released on 2018-06-05 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of the theory and practice of the simulation and optimization of the petroleum refining processes Petroleum Refinery Process Modeling offers a thorough review of how to quantitatively model key refinery reaction and fractionation processes. The text introduces the basics of dealing with the thermodynamics and physical property predictions of hydrocarbon components in the context of process modeling. The authors - three experts on the topic - outline the procedures and include the key data required for building reaction and fractionation models with commercial software. The text shows how to filter through the extensive data available at the refinery and using plant data to begin calibrating available models and extend the models to include key fractionation sub-models. It provides a sound and informed basis to understand and exploit plant phenomena to improve yield, consistency, and performance. In addition, the authors offer information on applying models in an overall refinery context through refinery planning based on linear programming. This important resource: -Offers the basic information of thermodynamics and physical property predictions of hydrocarbon components in the context of process modeling -Uses the key concepts of fractionation lumps and physical properties to develop detailed models and workflows for atmospheric (CDU) and vacuum (VDU) distillation units -Discusses modeling FCC, catalytic reforming and hydroprocessing units Written for chemical engineers, process engineers, and engineers for measurement and control, this resource explores the advanced simulation tools and techniques that are available to support experienced and aid new operators and engineers.
Download or read book Dynamics and Control of Chemical Reactors Distillation Columns and Batch Processes DYCORD 92 written by J.G. Balchen and published by Elsevier. This book was released on 2014-05-23 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: In addition to the three main themes: chemical reactors, distillation columns, and batch processes this volume also addresses some of the new trends in dynamics and control methodology such as model based predictive control, new methods for identification of dynamic models, nonlinear control theory and the application of neural networks to identification and control. Provides a useful reference source of the major advances in the field.
Download or read book 12th International Symposium on Process Systems Engineering and 25th European Symposium on Computer Aided Process Engineering written by and published by Elsevier. This book was released on 2015-07-14 with total page 2667 pages. Available in PDF, EPUB and Kindle. Book excerpt: 25th European Symposium on Computer-Aided Process Engineering contains the papers presented at the 12th Process Systems Engineering (PSE) and 25th European Society of Computer Aided Process Engineering (ESCAPE) Joint Event held in Copenhagen, Denmark, 31 May - 4 June 2015. The purpose of these series is to bring together the international community of researchers and engineers who are interested in computing-based methods in process engineering. This conference highlights the contributions of the PSE/CAPE community towards the sustainability of modern society. Contributors from academia and industry establish the core products of PSE/CAPE, define the new and changing scope of our results, and future challenges. Plenary and keynote lectures discuss real-world challenges (globalization, energy, environment, and health) and contribute to discussions on the widening scope of PSE/CAPE versus the consolidation of the core topics of PSE/CAPE. - Highlights how the Process Systems Engineering/Computer-Aided Process Engineering community contributes to the sustainability of modern society - Presents findings and discussions from both the 12th Process Systems Engineering (PSE) and 25th European Society of Computer-Aided Process Engineering (ESCAPE) Events - Establishes the core products of Process Systems Engineering/Computer Aided Process Engineering - Defines the future challenges of the Process Systems Engineering/Computer Aided Process Engineering community
Download or read book Dynamics and Control of Process Systems 2004 written by Sirish Shah and published by Elsevier. This book was released on 2005-06-10 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Information Control Problems in Manufacturing 2006 written by Alexandre Dolgui and published by Elsevier. This book was released on 2007-04-18 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information Control Problems in Manufacturing 2006 contains the Proceedings of the 12th IFAC Symposium on Information Control Problems in Manufacturing (INCOM'2006). This symposium took place in Saint Etienne, France, on May 17-19 2006. INCOM is a tri-annual event of symposia series organized by IFAC and it is promoted by the IFAC Technical Committee on Manufacturing Plant Control. The purpose of the symposium INCOM'2006 was to offer a forum to present the state-of-the-art in international research and development work, with special emphasis on the applications of optimisation methods, automation and IT technologies in the control of manufacturing plants and the entire supply chain within the enterprise. The symposium stressed the scientific challenges and issues, covering the whole product and processes life cycle, from the design through the manufacturing and maintenance, to the distribution and service. INCOM'2006 Technical Program also included a special event on Innovative Engineering Techniques in Healthcare Delivery. The application of engineering and IT methods in medicine is a rapidly growing field with many opportunities for innovation. The Proceedings are composed of 3 volumes: Volume 1 - Information Systems, Control & Interoperability Volume 2 - Industrial Engineering Volume 3 - Operational Research * 3-volume set, containing 362 carefully reviewed and selected papers * presenting the state-of-the-art in international research and development in Information Control problems in Manufacturing
Download or read book 27th European Symposium on Computer Aided Process Engineering written by and published by Elsevier. This book was released on 2017-09-21 with total page 3064 pages. Available in PDF, EPUB and Kindle. Book excerpt: 27th European Symposium on Computer Aided Process Engineering, Volume 40 contains the papers presented at the 27th European Society of Computer-Aided Process Engineering (ESCAPE) event held in Barcelona, October 1-5, 2017. It is a valuable resource for chemical engineers, chemical process engineers, researchers in industry and academia, students, and consultants for chemical industries. - Presents findings and discussions from the 27th European Society of Computer-Aided Process Engineering (ESCAPE) event
Download or read book 10th International Symposium on Process Systems Engineering written by Rita Maria de Brito Alves and published by Elsevier. This book was released on 2009 with total page 1229 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 10th International Symposium on Process Systems Engineering, PSE'09, will be held in Salvador-Bahia, Brazil on August 16-20, 2009. The special focus of PSE 2009 is Sustainability, Energy and Engineering. PSE 2009 is the tenth in the triennial series of international symposia on process systems engineering initiated in 1982. The meeting is brings together the worldwide PSE community of researchers and practitioners who are involved in the creation and application of computing-based methodologies for planning, design, operation, control and maintenance of chemical and petrochemical process industries. PSE'09 will look at how the PSE methods and tools can support sustainable resource systems and emerging technologies in the areas of green engineering: environmentally conscious design of industrial processes. PSE methods and tools support: - sustainable resource systems - emerging technologies in the areas of green engineering - environmentally conscious design of industrial processes
Download or read book Fourth European Symposium on Computer Aided Process Engineering ESCAPE 4 written by F. A. Perris and published by IChemE. This book was released on 1994 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ESCAPE symposia address the applications of computer aids to all aspects of process engineering. The primary objective is the interchange of information on industrial needs, new technology developments and research opportunities. With industrialists and academia contibuting from all over the world, this set of proceedings provides an overview of current international computer-aided process engineering (CAPE). This book is intended for chemical and process engineers, design engineers and computer-aided specialists.
Download or read book Crude Oil Fouling written by Francesco Coletti and published by Gulf Professional Publishing. This book was released on 2014-11-20 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: With production from unconventional rigs continuing to escalate and refineries grappling with the challenges of shale and heavier oil feedstocks, petroleum engineers and refinery managers must ensure that equipment used with today's crude oil is protected from fouling deposits Crude Oil Fouling addresses this overarching challenge for the petroleum community with clear explanations on what causes fouling, current models and new approaches to evaluate and study the formation of deposits, and how today's models could be applied from lab experiment to onsite field usability for not just the refinery, but for the rig, platform, or pipeline. Crude Oil Fouling is a must-have reference for every petroleum engineer's library that gives the basic framework needed to analyze, model, and integrate the best fouling strategies and operations for crude oil systems. - Defines the most critical variables and events that cause fouling - Explains the consequences of fouling and its impact on operations, safety, and economics - Provides the technical models available to better predict and eliminate the potential for fouling in any crude system
Download or read book Automation 2019 written by Roman Szewczyk and published by Springer. This book was released on 2019-02-15 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of papers presented at AUTOMATION2019, an international conference held in Warsaw from March 27 to 29, 2019. It discusses the radical technological changes occurring due to the INDUSTRY 4.0. To follow these changes, both scientists and engineers have to face the challenge of interdisciplinary approach directed at the development of cyber-physical systems. This approach encompasses interdisciplinary theoretical knowledge, numerical modelling and simulation as well as application of artificial intelligence techniques. Both software and physical devices are composed into systems that will increase production efficiency and resource savings. The theoretical results, practical solutions and guidelines presented are valuable for both researchers working in the area of engineering sciences and practitioners looking for solutions to industrial problems.
Download or read book 34th European Symposium on Computer Aided Process Engineering 15th International Symposium on Process Systems Engineering written by Flavio Manenti and published by Elsevier. This book was released on 2024-06-27 with total page 3634 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 34th European Symposium on Computer Aided Process Engineering / 15th International Symposium on Process Systems Engineering, contains the papers presented at the 34th European Symposium on Computer Aided Process Engineering / 15th International Symposium on Process Systems Engineering joint event. It is a valuable resource for chemical engineers, chemical process engineers, researchers in industry and academia, students, and consultants for chemical industries. - Presents findings and discussions from the 34th European Symposium on Computer Aided Process Engineering / 15th International Symposium on Process Systems Engineering joint event
Download or read book 10th International Symposium on Process Systems Engineering PSE2009 written by Rita Maria de Brito Alves and published by Elsevier. This book was released on 2009-08-05 with total page 1230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the 10e of a series of international symposia on process systems engineering (PSE) initiated in 1982. The special focus of PSE09 is how PSE methods can support sustainable resource systems and emerging technologies in the areas of green engineering. * Contains fully searchable CD of all printed contributions * Focus on sustainable green engineering * 9 Plenary papers, 21 Keynote lectures by leading experts in the field
Download or read book Dynamics and Control of Chemical Reactors Distillation Columns and Batch Processes written by and published by . This book was released on 1995 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Model Based Control written by Paul Serban Agachi and published by John Wiley & Sons. This book was released on 2007-09-24 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling a gap in the literature for a practical approach to the topic, this book is unique in including a whole section of case studies presenting a wide range of applications from polymerization reactors and bioreactors, to distillation column and complex fluid catalytic cracking units. A section of general tuning guidelines of MPC is also present.These thus aid readers in facilitating the implementation of MPC in process engineering and automation. At the same time many theoretical, computational and implementation aspects of model-based control are explained, with a look at both linear and nonlinear model predictive control. Each chapter presents details related to the modeling of the process as well as the implementation of different model-based control approaches, and there is also a discussion of both the dynamic behaviour and the economics of industrial processes and plants. The book is unique in the broad coverage of different model based control strategies and in the variety of applications presented. A special merit of the book is in the included library of dynamic models of several industrially relevant processes, which can be used by both the industrial and academic community to study and implement advanced control strategies.
Download or read book Nonlinear Model based Process Control written by Rashid M. Ansari and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Advances in Industrial Control aims to report and encourage technology transfer in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies ... , new challenges. Much of this development work resides in industrial reports, feasibility study papers and the reports of advanced collaborative projects. The series offers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. The last decade has seen considerable interest in reviving the fortunes of non linear control. In contrast to the approaches of the 60S, 70S and 80S a very pragmatic agenda for non-linear control is being pursued using the model-based predictive control paradigm. This text by R. Ansari and M. Tade gives an excellent synthesis of this new direction. Two strengths emphasized by the text are: (i) four applications found in refinery processes are used to give the text a firm practical continuity; (ii) a non-linear model-based control architecture is used to give the method a coherent theoretical framework.
Download or read book 20th European Symposium of Computer Aided Process Engineering written by Sauro Pierucci and published by Elsevier. This book was released on 2010-06-03 with total page 1373 pages. Available in PDF, EPUB and Kindle. Book excerpt: ESCAPE-20 is the most recent in a series of conferences that serves as a forum for engineers, scientists, researchers, managers and students from academia and industry to present and discuss progress being made in the area of "Computer Aided Process Engineering" (CAPE). CAPE covers computer-aided methods, algorithms and techniques related to process and product engineering. The ESCAPE-20 scientific program reflects the strategic objectives of the CAPE Working Party: to check the status of historically consolidated topics by means of their industrial application and to evaluate their emerging issues. - Includes a CD that contains all research papers and contributions - Features a truly international scope, with guest speakers and keynote talks from leaders in science and industry - Presents papers covering the latest research, key topical areas, and developments in computer-aided process engineering (CAPE)
