Download or read book Dynamic Modelling Bifurcation and Chaotic Behaviour of Gas Solid Catalytic Reactors written by S. S. E. H. Elnashaie and published by CRC Press. This book was released on 1996-03-18 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modelling Simulation and Optimization of Industrial Fixed Bed Catalytic Reactors written by S.S.E.H. Elnashaie and published by Routledge. This book was released on 2022-01-27 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last two decades impressive advances have been made toward the understanding and quantitative description of the kinetics. Despite these advances, however, the use of mathematical modelling of gas-solid catalytic reactors in industry is still limited. By consolidating progress in the understanding of catalytic processes, this book applies these fundamental advances to the development of models for design, simulation and optimization of industrial reactors. Paying particular attention to the verification of the developed models against industrial data, these models are used to optimize the performance of many practical reactor cases. Using a systems approach for the development of the different components and the resulting overall models, the book is easy to read and gives an insight into the behaviour of these complex industrial systems. In addition, the practical relevance of bifurcation, instability and chaos to industrial reactors is briefly discussed.
Download or read book Sustainable Solutions for Environmental Pollution Volume 1 written by Nour Shafik El-Gendy and published by John Wiley & Sons. This book was released on 2021-09-20 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: SUSTAINABLE SOLUTIONS FOR ENVIRONMENTAL POLLUTION This first volume in a broad, comprehensive two-volume set, Sustainable Solutions for Environmental Pollution, concentrates on the role of waste management in solving pollution problems and the value-added products that can be created out of waste, turning a negative into an environmental and economic positive. Environmental pollution is one of the biggest problems facing our world today, in every country, region, and even down to local landfills. Not just solving these problems, but turning waste into products, even products that can make money, is a huge game-changer in the world of environmental engineering. Finding ways to make fuel and other products from solid waste, setting a course for the production of future biorefineries, and creating a clean process for generating fuel and other products are just a few of the topics covered in the groundbreaking new first volume in the two-volume set, Sustainable Solutions for Environmental Pollution. The valorization of waste, including the creation of biofuels, turning waste cooking oil into green chemicals, providing sustainable solutions for landfills, and many other topics are also covered in this extensive treatment on the state of the art of this area in environmental engineering. This groundbreaking new volume in this forward-thinking set is the most comprehensive coverage of all of these issues, laying out the latest advances and addressing the most serious current concerns in environmental pollution. Whether for the veteran engineer or the student, this is a must-have for any library. AUDIENCE Petroleum, chemical, process, and environmental engineers, other scientists and engineers working in the area of environmental pollution, and students at the university and graduate level studying these areas
Download or read book Composition Modulation of Catalytic Reactors written by P L Silverton and published by CRC Press. This book was released on 1998-11-26 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composition modulation is a method of operating a catalytic reactor to improve catalyst activity or selectivity and has been under study for more than 25 years. In the last few years, several commercial applications have been realized and more will certainly appear. A large international research literature now exists. This book examines this literature and attempts to organize and analyze it with the intent of identifying the magnitude of improvements possible, why modulation is effective, and what questions remain unanswered. Topics include hydrogenation, oxidation, reduction, and polymerization reactions for NOX, SOX, NH3, and hydrocarbons.
Download or read book Dynamics of Surfaces and Reaction Kinetics in Heterogeneous Catalysis written by G.F. Froment and published by Elsevier. This book was released on 1997-09-03 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many processes of the chemical industry are based upon heterogeneous catalysis. Two important items of these processes are the development of the catalyst itself and the design and optimization of the reactor. Both aspects would benefit from rigorous and accurate kinetic modeling, based upon information on the working catalyst gained from classical steady state experimentation, but also from studies using surface science techniques, from quantum chemical calculations providing more insight into possible reaction pathways and from transient experimentation dealing with reactions and reactors. This information is seldom combined into a kinetic model and into a quantitative description of the process. Generally the catalytic aspects are dealt with by chemists and by physicists, while the chemical engineers are called upon for mechanical aspects of the reactor design and its control. The symposium "Dynamics of Surfaces and Reaction Kinetics in Heterogeneous Catalysis" aims at illustrating a more global and concerted approach through a number of prestigious keynote lectures and severely screened oral and poster presentations.
Download or read book Handbook of Food Process Modeling and Statistical Quality Control written by Mustafa Ozilgen and published by CRC Press. This book was released on 1998-09-16 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental techniques of mathematical modeling of processes essential to the food industry are explained in this text. Instead of concentrating on detailed theoretical analysis and mathematical derivations, important mathematical prerequisites are presented in summary tables. Readers' attention is focused on understanding modeling techniques, rather than the finer mathematical points. Topics covered include modeling of transport phenomena, kinetic processes, and food engineering operations. Statistical process analysis and quality control as applied to the food industry are also discussed. The book's main feature is the large number of worked examples presented throughout. Included are examples from almost every conceivable food process, most of which are based on real data given in the many references. Each example is followed by a clear, step- by-step worked solution.
Download or read book Hydrodynamics Mass and Heat Transfer in Chemical Engineering written by Andrei D. Polyanin and published by CRC Press. This book was released on 2001-09-27 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrodynamics, Mass and Heat Transfer in Chemical Engineering contains a concise and systematic exposition of fundamental problems of hydrodynamics, heat and mass transfer, and physicochemical hydrodynamics, which constitute the theoretical basis of chemical engineering in science. Areas covered include: fluid flows; processes of chemical engineeri
Download or read book Liquid and Vapour Flows in Porous Bodies written by N.V. Churaev and published by CRC Press. This book was released on 2000-03-09 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adopts a completely original approach to the study of processes of mass transfer. In contrast to the usual approach, based on the concept of continuum media and the theory of heat and mass transfer, the topic is considered from a new viewpoint, taking into account the heterogeneous dispersal state of porous bodies. The author bases his discussion on the theory of surface forces and microhydrodynamic analysis of the processes of mass transport of gases, liquids and vapors, providing the reader with a systematic account of liquid/solid and gas/solid interfaces. Topics treated in this book include structural peculiarities, equilibrium and properties of liquids in porous bodies. Various mechanisms of mass transfer are considered, including liquid flow in pores and films, gas diffusion, combined transfer of liquid and vapor, convective diffusion in solutions, structure formation, capillary phenomena, and wetting. This unique book provides a wealth of information from the former Soviet Union, which will be of great interest to chemists, physicists and materials scientists, as well as industrialists working with a variety of different products in which disperse systems and porous bodies are important.
Download or read book Thermal Processing of Bio Materials written by Tadeusz Kudra and published by CRC Press. This book was released on 1998-09-16 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a result of developments in biotechnology, bioengineering, and related sciences, processing of bio-materials and bioproducts has become an area of strategic importance. Written in a textbook style, this book attempts to bring together both the theory and practice of thermal processing of bio-materials. After giving the basic information on material properties, the authors describe the principal techniques such as freezing, chilling, membrane concentration, evaporation, drying, and sterilization. New methods of drying based on the authors' research experiences are presented to a great extent. Much attention is paid to quality interactions, including degradation of thermo and xerolabile bio- products. Given the strong effect of temperature on micro-organisms, a separate chapter is dedicated to thermobacteriology.
Download or read book The Modelling and Dynamics of Catalysts and Fixed Bed Reactors written by Klavs Flemming Jensen and published by . This book was released on 1980 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fractals and Chaos in Chemical Engineering written by Massimiliano Giona and published by World Scientific. This book was released on 1997 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This volume is a collection of the papers presented at the International Conference on Fractal Concepts and the Application of Chaos in Chemical Engineering Problems. The book provides a detailed description of the current research on the application of fractal concepts, nonlinear dynamics and disordered systems in chemical engineering, with emphasis on interdisciplinary connections with related fields, such as control theory of nonlinear systems, dynamic theory of fractals, transport theory and physical chemistry of heterogeneous materials."--Publisher's website.
Download or read book Numerical Techniques for Chemical and Biological Engineers Using MATLAB written by Said S.E.H. Elnashaie and published by Springer Science & Business Media. This book was released on 2007-03-12 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: This interdisciplinary book presents numerical techniques needed for chemical and biological engineers using Matlab. The book begins by exploring general cases, and moves on to specific ones. The text includes a large number of detailed illustrations, exercises and industrial examples. The book provides detailed mathematics and engineering background in the appendixes, including an introduction to Matlab. The text will be useful to undergraduate students in chemical/biological engineering, and in applied mathematics and numerical analysis.
Download or read book Introduction to Process Control written by Jose A. Romagnoli and published by CRC Press. This book was released on 2020-07-14 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Process Control, Third Edition continues to provide a bridge between traditional and modern views of process control by blending conventional topics with a broader perspective of integrated process operation, control, and information systems. Updated and expanded throughout, this third edition addresses issues highly relevant to today’s teaching of process control: Discusses smart manufacturing, new data preprocessing techniques, and machine learning and artificial intelligence concepts that are part of current smart manufacturing decisions Includes extensive references to guide the reader to the resources needed to solve modeling, classification, and monitoring problems Introduces the link between process optimization and process control (optimizing control), including the effect of disturbances on the optimal plant operation, the concepts of steady-state and dynamic back-off as ways to quantify the economic benefits of control, and how to determine an optimal transition policy during a planned production change Incorporates an introduction to the modern architectures of industrial computer control systems with real case studies and applications to pilot-scale operations Analyzes the expanded role of process control in modern manufacturing, including model-centric technologies and integrated control systems Integrates data processing/reconciliation and intelligent monitoring in the overall control system architecture Drawing on the authors’ combined 60 years of teaching experiences, this classroom-tested text is designed for chemical engineering students but is also suitable for industrial practitioners who need to understand key concepts of process control and how to implement them. The text offers a comprehensive pedagogical approach to reinforce learning and presents a concept first followed by an example, allowing students to grasp theoretical concepts in a practical manner and uses the same problem in each chapter, culminating in a complete control design strategy. A vast number of exercises throughout ensure readers are supported in their learning and comprehension. Downloadable MATLAB® toolboxes for process control education as well as the main simulation examples from the book offer a user-friendly software environment for interactively studying the examples in the text. These can be downloaded from the publisher’s website. Solutions manual is available for qualifying professors from the publisher.
Download or read book Introduction to Process Control Second Edition written by Jose A. Romagnoli and published by CRC Press. This book was released on 2012-02-14 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Process Control, Second Edition provides a bridge between the traditional view of process control and the current, expanded role by blending conventional topics with a broader perspective of more integrated process operation, control, and information systems. Updating and expanding the content of its predecessor, this second edition addresses issues in today’s teaching of process control. Teaching & Learning Principles Presents a concept first followed by an example, allowing students to grasp theoretical concepts in a practical manner Uses the same problem in each chapter, culminating in a complete control design strategy Includes 50 percent more exercises Content Defines the traditional and expanded roles of process control in modern manufacturing Introduces the link between process optimization and process control (optimizing control), including the effect of disturbances on the optimal plant operation, the concepts of steady-state and dynamic backoff as ways to quantify the economic benefits of control, and how to determine an optimal transition policy during a planned production change Incorporates an introduction to the modern architectures of industrial computer control systems with real case studies and applications to pilot-scale operations Discusses the expanded role of process control in modern manufacturing, including model-centric technologies and integrated control systems Integrates data processing/reconciliation and intelligent monitoring in the overall control system architecture Web Resource The book’s website offers a user-friendly software environment for interactively studying the examples in the text. The site contains the MATLAB® toolboxes for process control education as well as the main simulation examples from the book. Access the site through the authors’ websites at www.pseonline.net and www.chms.ucdavis.edu/research/web/pse/ahmet/ Drawing on the authors’ combined 50 years of teaching experiences, this classroom-tested text is designed for chemical engineering students but is also suitable for industrial practitioners who need to understand key concepts of process control and how to implement them. The authors help readers see how traditional process control has evolved into an integrated operational environment used to run modern manufacturing facilities.
Download or read book Choice written by and published by . This book was released on 1996 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonlinear Dynamics and Control in Process Engineering Recent Advances written by G. Continillo and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a collection of peer-reviewed articles on dynamics, control and simulation of chemical processes. It covers a variety of different methods for approaching process dynamics and control, including bifurcation analysis, computational fluid dynamics, neural network applications, numerical simulations of partial differential equations, process identification and control, Lagrangian analysis of mixing. The book is intended both for scientists and engineering involved in process analysis and control and for researchers (system engineering, mathematicians and physicists) interested in nonlinear sciences. It provides an overview of the typical problems of chemical and process engineering, in which dynamical system theory finds a significant and fertile field of applications.
Download or read book Chemistry and Industry written by and published by . This book was released on 1995 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: