Download or read book Dynamic Mechanical Analysis for Plastics Engineering written by Michael Sepe and published by William Andrew. This book was released on 1999-01-14 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: As plastics are being used more extensively in high-performance markets, it is imperative that designers and engineers understand all aspects of polymer behavior over an extended service life. Dynamic Mechanical Analysis for Plastics Engineering describes practical uses for DMA information. All of the information for 120 families of thermoplastics is based on independent test data conducted exclusively for this product and is not available through any other source. This PDL addition shows how to use the DMA data to predict, at various temperatures, each materials estimated service life and potential for failure. This book explains the correlation between time and temperature-dependence and illustrates how time-dependent responses such as creep and stress relaxation affect the practical utility of different materials. Basic polymer structures are discussed and test results show how these structural details can be detected and understood.

Download or read book Dynamic Mechanical Analysis written by Kevin P. Menard and published by CRC Press. This book was released on 2020-05-04 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Mechanical Analysis (DMA) is a powerful technique for understanding the viscoelastic properties of materials. It has become a powerful tool for chemists, polymer and material scientists, and engineers. Despite this, it often remains underutilized in the modern laboratory. Because of its high sensitivity to the presence of the glass transition, many users limit it to detecting glass transitions that can’t be seen by differential scanning calorimetry (DSC). This book presents a practical and straightforward approach to understanding how DMA works and what it measures. Starting with the concepts of stress and strain, the text takes the reader through stress–strain, creep, and thermomechanical analysis. DMA is discussed as both the instrument and fixtures as well as the techniques for measuring both thermoplastic and thermosetting behavior. This edition offers expanded chapters on these areas as well as frequency scanning and other application areas. To help the reader grasp the material, study questions have also been added. Endnotes have been expanded and updated. Features Reflects the latest DMA research and technical advances Includes case studies to demonstrate the use of DMA over a range of industrial problems Includes numerous references to help those with limited materials engineering background Demonstrates the power of DMA as a laboratory tool for analysis and testing

Download or read book Dynamic Mechanical Analysis For Plastics Engineering written by Michael Sepe and published by Plastics Design Library. This book was released on 1996-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The CD-ROM & BOOK SET. The optionally available CD-ROM is a powerful and timesaving interactive tool for comparing independent test data and predicting the time-temperature dependent behavior of over 120 thermoplastics under load. It enable users to electronically access, compare and export all the data on properties such as creep resistance, heat resistance, and brittle/ductile transitions. As plastics are being used more extensively in high-performance markets, it is imperative that designers and engineers understand all aspects of polymer behavior over an extended service life. Dynamic Mechanical Analysis for Plastics Engineering describes practical uses for DMA information. All of the information for 120 families of thermoplastics is based on independent test data conducted exclusively for this product and is not available through any other source. This latest PDL addition shows how to use the DMA data to predict, at various temperatures, each material's estimated service life and potential for failure.This book explains the correlation between time and temperature-dependence and illustrates how time-dependent responses such as creep and stress relaxation affect the practical utility of different materials. Basic polymer structures are discussed and test results show how these structural details can be detected and understood.

Download or read book Mechanical and Dynamic Properties of Biocomposites written by Senthilkumar Krishnasamy and published by John Wiley & Sons. This book was released on 2021-06-21 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical and Dynamic Properties of Biocomposites A comprehensive review of the properties of biocomposites and their applications Mechanical and Dynamic Properties of Biocomposites offers a comprehensive overview of the mechanical and dynamic properties of biocomposites and natural fiber-reinforced polymer composites. This essential resource helps with materials selection in the development of products in the fields of automotive and aerospace engineering as well as the construction of structures in civil engineering. With contributions from a panel of experts in the field, the book reviews the mechanical and damping properties of lingo-cellulosic fibers and their composites. The authors highlight the factors that contribute to the improved properties and their advancements in modern industrialization. Besides, the book is designed to (a) introduce the mechanical and damping properties of lingo-cellulosic fibers and their composites, (b) factors that contribute to improvement in properties such as hybridization, chemical treatment of natural fibers, additive or fillers, etc. and (c) the real-time applications with case studies and future prospects. Key features: Presents viable alternatives to conventional composites Examines the environmentally friendly and favorable mechanical properties of biocomposites Reviews the potential applications of biocomposites in the fields of automotive, mechanical and civil engineering Brings together in one comprehensive resource information found scattered across the professional literature Written for materials scientists, polymer chemists, chemists in industry, civil engineers, construction engineers, and engineering scientists in industry, Mechanical and Dynamic Properties of BIocomposites offers a compreshensive review of the properties and applications of biocomposites.

Download or read book Introduction to Plastics Engineering written by Vijay K. Stokes and published by John Wiley & Sons. This book was released on 2020-04-02 with total page 1627 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authoritative introduction to all aspects of plastics engineering — offering both academic and industry perspectives in one complete volume. Introduction to Plastics Engineering provides a self-contained introduction to plastics engineering. A unique synergistic approach explores all aspects of material use — concepts, mechanics, materials, part design, part fabrication, and assembly — required for converting plastic materials, mainly in the form of small pellets, into useful products. Thermoplastics, thermosets, elastomers, and advanced composites, the four disparate application areas of polymers normally treated as separate subjects, are covered together. Divided into five parts — Concepts, Mechanics, Materials, Part Processing and Assembly, and Material Systems — this inclusive volume enables readers to gain a well-rounded, foundational knowledge of plastics engineering. Chapters cover topics including the structure of polymers, how concepts from polymer physics explain the macro behavior of plastics, evolving concepts for plastics use, simple mechanics principles and their role in plastics engineering, models for the behavior of solids and fluids, and the mechanisms underlying the stiffening of plastics by embedded fibers. Drawing from his over fifty years in both academia and industry, Author Vijay Stokes uses the synergy between fundamentals and applications to provide a more meaningful introduction to plastics. Examines every facet of plastics engineering from materials and fabrication methods to advanced composites Provides accurate, up-to-date information for students and engineers both new to plastics and highly experienced with them Offers a practical guide to large number of materials and their applications Addresses current issues for mechanical design, part performance, and part fabrication Introduction to Plastics Engineering is an ideal text for practicing engineers, researchers, and students in mechanical and plastics engineering and related industries.

Download or read book Dynamic Mechanical Analysis written by Kevin P. Menard and published by CRC Press. This book was released on 2008-05-28 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic mechanical analysis (DMA) has left the domain of the rheologist and has become a prevalent tool in the analytical laboratory. However, information on the use of this important tool is still scattered among a range of books and articles. Novices in the field have to dig through thermal analysis, rheology, and materials texts just to find the

Download or read book Physical Testing of Plastics written by T. R Crompton and published by Smithers Rapra. This book was released on 2012-01-16 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the physical rather than the chemical examination of the properties of polymers on the basis of the type of equipment used, examples of the applications of these techniques are given. Techniques examined include thermal analysis (thermogravimetric analysis and evolved gas analysis), dynamic mechanical analysis and thermomechanical analysis, dielectric thermal analysis, ESR, MALDI, luminescence testing, photocalorimetry testing and the full range of equipment for mechanical, thermal, electrical, rheological, particle size, molecular weight.

Download or read book Mechanical Properties and Testing of Polymers written by G.M. Swallowe and published by Springer Science & Business Media. This book was released on 1999-11-30 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents a continuation of the Polymer Science and Technology series edited by Dr. D. M. Brewis and Professor D. Briggs. The theme of the series is the production of a number of stand alone volumes on various areas of polymer science and technology. Each volume contains short articles by a variety of expert contributors outlining a particular topic and these articles are extensively cross referenced. References to related topics included in the volume are indicated by bold text in the articles, the bold text being the title of the relevant article. At the end of each article there is a list of bibliographic references where interested readers can obtain further detailed information on the subject of the article. This volume was produced at the invitation of Derek Brewis who asked me to edit a text which concentrated on the mechanical properties of polymers. There are already many excellent books on the mechanical properties of polymers, and a somewhat lesser number of volumes dealing with methods of carrying out mechanical tests on polymers. Some of these books are listed in Appendix 1. In this volume I have attempted to cover basic mechanical properties and test methods as well as the theory of polymer mechanical deformation and hope that the reader will find the approach useful.

Download or read book Handbook of Plastics Analysis written by Hubert Lobo and published by CRC Press. This book was released on 2003-06-25 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics possess properties that have revolutionized the manufacture of products in the 20th century and beyond. It remains critical to understand their behavior throughout their life cycle, from manufacture to use and eventually to reclamation and disposal. This volume highlights the most prominent tools in physical and chemical analysis techniques and applications. A practical reference for performing measurements, solving problems, and investigating behavioral phenomena, the editors advocate a phenomenological approach, relying on case studies and illustrations to represent possible outcomes of each technique and presenting the basic governing equations where necessary.

Download or read book Thermal Analysis of Polymers written by M. P. Sepe and published by iSmithers Rapra Publishing. This book was released on 1997 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: The techniques which are particularly relevant to polymer characterisation are evaluated in this new report. For each technique the author describes the method of operation and the output obtained, and then considers its application to polymer characterisation. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database provides useful references for further reading.

Download or read book Introduction to Plastics Engineering written by Vijay K. Stokes and published by John Wiley & Sons. This book was released on 2020-05-18 with total page 1057 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authoritative introduction to all aspects of plastics engineering — offering both academic and industry perspectives in one complete volume. Introduction to Plastics Engineering provides a self-contained introduction to plastics engineering. A unique synergistic approach explores all aspects of material use — concepts, mechanics, materials, part design, part fabrication, and assembly — required for converting plastic materials, mainly in the form of small pellets, into useful products. Thermoplastics, thermosets, elastomers, and advanced composites, the four disparate application areas of polymers normally treated as separate subjects, are covered together. Divided into five parts — Concepts, Mechanics, Materials, Part Processing and Assembly, and Material Systems — this inclusive volume enables readers to gain a well-rounded, foundational knowledge of plastics engineering. Chapters cover topics including the structure of polymers, how concepts from polymer physics explain the macro behavior of plastics, evolving concepts for plastics use, simple mechanics principles and their role in plastics engineering, models for the behavior of solids and fluids, and the mechanisms underlying the stiffening of plastics by embedded fibers. Drawing from his over fifty years in both academia and industry, Author Vijay Stokes uses the synergy between fundamentals and applications to provide a more meaningful introduction to plastics. Examines every facet of plastics engineering from materials and fabrication methods to advanced composites Provides accurate, up-to-date information for students and engineers both new to plastics and highly experienced with them Offers a practical guide to large number of materials and their applications Addresses current issues for mechanical design, part performance, and part fabrication Introduction to Plastics Engineering is an ideal text for practicing engineers, researchers, and students in mechanical and plastics engineering and related industries.

Download or read book Polymers and Multicomponent Polymeric Systems written by Jose James and published by CRC Press. This book was released on 2019-12-06 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, multicomponent polymers have generated much interest due to their excellent properties, unique morphology and high-end applications. Book focusses on thermal, thermo-mechanical and dielectric analysis of polymers and multicomponent polymeric systems like blends, interpenetrating polymeric networks (IPNs), gels, polymer composites, nanocomposites. Through these analyses, it provides an insight into the stability of polymer systems as a function of time, processing and usage. Aimed at polymer chemists, physicists and engineers, it also covers ASTM /ISO and other standards of various measurement techniques for systematic analysis in materials science.

Download or read book Introduction to Plastics Engineering written by Anshuman Shrivastava and published by William Andrew. This book was released on 2018-05-15 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Plastics Engineering provides a single reference covering the basics of polymer and plastics materials, and their properties, design, processing and applications in a practical way. The book discusses materials engineering through properties formulation, combining part design and processing to produce final products. This book will be a beneficial guide to materials engineers developing new formulations, processing engineers producing those formulations, and design and product engineers seeking to understand the materials and methods for developing new applications. The book incorporates material properties, engineering, processing, design, applications and sustainable and bio based solutions. Ideal for those just entering the industry, or transitioning between sectors, this is a quick, relevant and informative reference guide to plastics engineering and processing for engineers and plastics practitioners. Provides a single unified reference covering plastics materials, properties, design, processing and applications Offers end-to-end coverage of the industry, from formulation to part design, processing, and the final product Serves as an ideal introductory book for new plastics engineers and students of plastics engineering Provides a convenient reference for more experienced practitioners

Download or read book Polymer Viscoelasticity written by Evaristo Riande and published by CRC Press. This book was released on 1999-11-05 with total page 906 pages. Available in PDF, EPUB and Kindle. Book excerpt: Showcasing vital engineering applications to transient and dynamic pertubations of macromolecular materials, structural recovery's role in mechanical responses in the glassy state, and viscoelastic parameters that condition the non-Newtonian behaviour of polymers, this work presents a systematic account of the responses of macromolecular materials to mechanical force fields. It focuses on the most important features of the linear stress-strain relationships for ideal solids and liquids.

Download or read book Advanced Manufacturing and Processing Technology written by Chander Prakash and published by CRC Press. This book was released on 2020-10-25 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book disseminates recent research, theories, and practices relevant to the areas of surface engineering and the processing of materials for functional applications in the aerospace, automobile, and biomedical industries. The book focuses on the hidden technologies and advanced manufacturing methods that may not be standardized by research institutions but are greatly beneficial to material and manufacturing industrial engineers in many ways. It details projects, research activities, and innovations in a global platform to strengthen the knowledge of the concerned community. The book covers surface engineering including coating, deposition, cladding, nanotechnology, surface finishing, precision machining, processing, and emerging advanced manufacturing technologies to enhance the performance of materials in terms of corrosion, wear, and fatigue. The book captures the emerging areas of materials science and advanced manufacturing engineering and presents recent trends in research for researchers, field engineers, and academic professionals.

Download or read book Handbook of Polymer Testing written by Roger Brown and published by CRC Press. This book was released on 1999-01-21 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Polymer Testing: Physical Methods provides virtually currently used techniques for measuring and testing the physical properties of polymers. A concise but detailed technical guide to the physical testing methods of synthetic polymers in plastics, rubbers, cellular materials, textiles, coated fabrics, and composites, the book analys

Download or read book Fluoropolymer Applications in the Chemical Processing Industries written by Sina Ebnesajjad and published by William Andrew. This book was released on 2004-12-02 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a self-contained collection of data and information on applications of fluoropolymers components for corrosion control in chemical processing industries. Due to their superior properties, fluoropolymers have been rapidly replacing metal alloys for preserving the purity of processing streams in the chemical processing, plastics, food, pharmaceutical, semiconductor, and pulp and paper industries.