Download or read book Dynamic Mechanical Analysis and Organization storage of Data for Polymetric Materials written by and published by . This book was released on 1982 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Data Bases and Data Base Systems Related to NASA s Aerospace Program written by and published by . This book was released on 1983 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterization and Analysis of Polymers written by Wiley and published by John Wiley & Sons. This book was released on 2008-02-08 with total page 987 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on Wiley's renowned Encyclopedia of Polymer Science and Technology, this book provides coverage of key methods of characterization of the physical and chemical properties of polymers, including atomic force microscopy, chromatographic methods, laser light scattering, nuclear magnetic resonance, and thermal analysis, among others. Written by prominent scholars from around the world, this reference presents over twenty-five self -contained articles on the most used analytical techniques currently practiced in polymer science.
Download or read book Data Bases and Data Base Systems Related to NASA s Aerospace Program written by and published by . This book was released on 1983 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: A selection of annotated references to unclassified reports and journal articles that were introduced into the NASA scientific and technical information system from ... through ... in Scientific and Technical Aerospace Reports (STAR), International Aerospace Abstracts (IAA).
Download or read book Data Bases and Data Base Systems Related to NASA s Aerospace Program written by United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch and published by . This book was released on 1983 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA SP written by and published by . This book was released on 1991 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Polymer Science and Technology Concise written by Herman F. Mark and published by John Wiley & Sons. This book was released on 2013-10-16 with total page 1490 pages. Available in PDF, EPUB and Kindle. Book excerpt: The compact, affordable reference, revised and updated The Encyclopedia of Polymer Science and Technology, Concise Third Edition provides the key information from the complete, twelve-volume Mark's Encyclopedia in an affordable, condensed format. Completely revised and updated, this user-friendly desk reference offers quick access to all areas of polymer science, including important advances in nanotechnology, imaging and analytical techniques, controlled polymer architecture, biomimetics, and more, all in one volume. Like the twelve-volume full edition, the Encyclopedia of Polymer Science and Technology, Concise Third Edition provides both SI and common units, carefully selected key references for each article, and hundreds of tables, charts, figures, and graphs.
Download or read book Advances in Diverse Industrial Applications of Nanocomposites written by Boreddy Reddy and published by BoD – Books on Demand. This book was released on 2011-03-22 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocomposites are attractive to researchers both from practical and theoretical point of view because of combination of special properties. Many efforts have been made in the last two decades using novel nanotechnology and nanoscience knowledge in order to get nanomaterials with determined functionality. This book focuses on polymer nanocomposites and their possible divergent applications. There has been enormous interest in the commercialization of nanocomposites for a variety of applications, and a number of these applications can already be found in industry. This book comprehensively deals with the divergent applications of nanocomposites comprising of 22 chapters.
Download or read book Engineered Materials Handbook Desk Edition written by ASM International. Handbook Committee and published by ASM International. This book was released on 1995-11-01 with total page 1313 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference on the properties, selection, processing, and applications of the most widely used nonmetallic engineering materials. Section 1, General Information and Data, contains information applicable both to polymers and to ceramics and glasses. It includes an illustrated glossary, a collection of engineering tables and data, and a guide to materials selection. Sections 2 through 7 focus on polymeric materials--plastics, elastomers, polymer-matrix composites, adhesives, and sealants--with the information largely updated and expanded from the first three volumes of the Engineered Materials Handbook. Ceramics and glasses are covered in Sections 8 through 12, also with updated and expanded information. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Dynamic Mechanical Analysis written by Kevin P. Menard and published by CRC Press. This book was released on 2020-05-04 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Mechanical Analysis (DMA) is a powerful technique for understanding the viscoelastic properties of materials. It has become a powerful tool for chemists, polymer and material scientists, and engineers. Despite this, it often remains underutilized in the modern laboratory. Because of its high sensitivity to the presence of the glass transition, many users limit it to detecting glass transitions that can’t be seen by differential scanning calorimetry (DSC). This book presents a practical and straightforward approach to understanding how DMA works and what it measures. Starting with the concepts of stress and strain, the text takes the reader through stress–strain, creep, and thermomechanical analysis. DMA is discussed as both the instrument and fixtures as well as the techniques for measuring both thermoplastic and thermosetting behavior. This edition offers expanded chapters on these areas as well as frequency scanning and other application areas. To help the reader grasp the material, study questions have also been added. Endnotes have been expanded and updated. Features Reflects the latest DMA research and technical advances Includes case studies to demonstrate the use of DMA over a range of industrial problems Includes numerous references to help those with limited materials engineering background Demonstrates the power of DMA as a laboratory tool for analysis and testing
Download or read book Polymer Blends Volume 1 written by Donald R Paul and published by Elsevier. This book was released on 2012-12-02 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Blends, Volume 1 highlights the importance of polymer blends as a major new branch of macromolecular science. Topics range from polymer-polymer compatibility and the statistical thermodynamics of polymer blends to the phase separation behavior of polymer-polymer mixtures, transport phenomena in polymer blends, and mechanical properties of multiphase polymer blends. The optical behavior, solid state transition behavior, and rheology of polymer blends are also discussed. This book is organized into 10 chapters and begins with an overview of polymer blends, with emphasis on terminology and the effect of molecular weight on the thermodynamics of polymer blends as well as phase equilibria and transitions. The discussion then turns to the miscibility of homopolymers and copolymers, in bulk and in solution, from the experimental and theoretical viewpoints. The chapters that follow explore the statistical thermodynamics of polymer blends, paying particular attention to the Flory and lattice fluid theories, along with the phase relationship in polymer mixtures. The interfacial energy, structure, and adhesion between polymers in relation to the properties of polymer blends are considered. The final chapter examines the phenomena of low molecular weight penetrant transport. Currently accepted models for unsteady-state and steady-state permeation of polymeric materials are presented. A discussion of unsteady-state absorption and desorption behavior observed in a variety of polymer blends complements the treatment of permeation behavior. This book is intended to provide academic and industrial research scientists and technologists with a broad background in current principles and practice concerning mixed polymer systems.
Download or read book Analysis and Analyzers written by Béla G. Lipták and published by CRC Press. This book was released on 2016-11-25 with total page 1333 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Instrument and Automation Engineers’ Handbook (IAEH) is the #1 process automation handbook in the world. Volume two of the Fifth Edition, Analysis and Analyzers, describes the measurement of such analytical properties as composition. Analysis and Analyzers is an invaluable resource that describes the availability, features, capabilities, and selection of analyzers used for determining the quality and compositions of liquid, gas, and solid products in many processing industries. It is the first time that a separate volume is devoted to analyzers in the IAEH. This is because, by converting the handbook into an international one, the coverage of analyzers has almost doubled since the last edition. Analysis and Analyzers: Discusses the advantages and disadvantages of various process analyzer designs Offers application- and method-specific guidance for choosing the best analyzer Provides tables of analyzer capabilities and other practical information at a glance Contains detailed descriptions of domestic and overseas products, their features, capabilities, and suppliers, including suppliers’ web addresses Complete with 82 alphabetized chapters and a thorough index for quick access to specific information, Analysis and Analyzers is a must-have reference for instrument and automation engineers working in the chemical, oil/gas, pharmaceutical, pollution, energy, plastics, paper, wastewater, food, etc. industries. About the eBook The most important new feature of the IAEH, Fifth Edition is its availability as an eBook. The eBook provides the same content as the print edition, with the addition of thousands of web addresses so that readers can reach suppliers or reference books and articles on the hundreds of topics covered in the handbook. This feature includes a complete bidders' list that allows readers to issue their specifications for competitive bids from any or all potential product suppliers.
Download or read book Clay Polymer Nanocomposites written by Khouloud Jlassi and published by Elsevier. This book was released on 2017-07-26 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clay–Polymer Nanocomposites is a complete summary of the existing knowledge on this topic, from the basic concepts of synthesis and design to their applications in timely topics such as high-performance composites, environment, and energy issues. This book covers many aspects of synthesis such as in- situ polymerization within the interlamellar spacing of the clays or by reaction of pristine or pre-modified clays with reactive polymers and prepolymers. Indeed, nanocomposites can be prepared at industrial scale by melt mixing. Regardless the synthesis method, much is said in this book about the importance of theclay pre-modification step, which is demonstrated to be effective, on many occasions, in obtaining exfoliated nanocomposites. Clay–Polymer Nanocomposites reports the background to numerous characterization methods including solid state NMR, neutron scattering, diffraction and vibrational techniques as well as surface analytical methods, namely XPS, inverse gas chromatography and nitrogen adsorption to probe surface composition, wetting and textural/structural properties. Although not described in dedicated chapters, numerous X-ray diffraction patterns of clay–polymer nanocomposites and reference materials are displayed to account for the effects of intercalation and exfoliations of layered aluminosilicates. Finally, multiscale molecular simulation protocols are presenting for predicting morphologies and properties of nanostructured polymer systems with industrial relevance. As far as applications are concerned, Clay–Polymer Nanocomposites examines structural composites such as clay–epoxy and clay–biopolymers, the use of clay–polymer nanocomposites as reactive nanocomposite fillers, catalytic clay-(conductive) polymers and similar nanocomposites for the uptake of hazardous compounds or for controlled drug release, antibacterial applications, energy storage, and more. - The most comprehensive coverage of the state of the art in clay–polymer nanocomposites, from synthesis and design to opportunities and applications - Covers the various methods of characterization of clay–polymer nanocomposites - including spectroscopy, thermal analyses, and X-ray diffraction - Includes a discussion of a range of application areas, including biomedicine, energy storage, biofouling resistance, and more
Download or read book Mechanical Properties of Solid Polymers written by I. M. Ward and published by . This book was released on 1983-06-27 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise, self-contained introduction to solid polymers, the mechanics of their behavior and molecular and structural interpretations. This updated edition provides extended coverage of recent developments in rubber elasticity, relaxation transitions, non-linear viscoelastic behavior, anisotropic mechanical behavior, yield behavior of polymers, breaking phenomena, and other fields.
Download or read book Shape Memory Polymers Blends and Composites written by Jyotishkumar Parameswaranpillai and published by Springer. This book was released on 2019-07-01 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the recent advances in the field of shape memory polymers, whose ease of manufacturing and wide range of potential applications have spurred interest in the field. The book presents details about the synthesis, processing, characterization, and applications of shape memory polymers, their blends and composites. It provides a correlation of physical properties of shape memory polymers with macro, micro and nano structures. The contents of this book will be of interest to researchers across academia and industry.
Download or read book Polyurethane Shape Memory Polymers written by W.M. Huang and published by CRC Press. This book was released on 2011-09-08 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape memory polymers (SMPs) are some of the most important and valuable engineering materials developed in the last 25 years. These fascinating materials demonstrate remarkably versatile properties-including capacity for actuation and stimulus responsiveness-that are enabling technologists to develop applications used to explore everything from th
