Download or read book ICE Specification for Piling and Embedded Retaining Walls written by and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition retains the three-part approach of the second edition. Part A is an introduction to the essential concepts necessary to procure a piling or retaining wall contract. Part B is the specification and is still the only part of this document intended for incorporation in contracts. Part C provides guidance for use of the specification and essential background information for specifiers and contractors alike. Unlike the second edition, Part 3 guidance notes immediately follow the relevant Part 2 specification requirements. The three sections provide the reader with a full compendium without being overly prescriptive.
Download or read book Load and Resistance Factor Design LRFD for Deep Foundations written by Samuel G. Paikowsky and published by Transportation Research Board. This book was released on 2004 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction and research approach -- Findings -- Interpretation, appraisal, and applications -- Conclusions and suggested research -- Bibliography -- Appendixes.
Download or read book Axial Load Testing of 3 ft Diameter Drilled Shafts at the Century Freeway in Los Angeles California written by Wilfred S. Yee and published by . This book was released on 1993 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Contemporary Topics in Deep Foundations written by Magued Iskander and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: GSP 185 contains 80 papers presented at the International Foundation Congress and Equipment Expo held in Orlando, Florida, March 15-19, 2009.
Download or read book The Application of Stress wave Theory to Piles written by Jaime Alberto dos Santos and published by IOS Press. This book was released on 2008 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This volume contains 101 papers presented at the 8th International Conference on the Application of Stress Wave Theory to Piles, held in Lisbon, Portugal in 2008." "It is divided in 14 chapters according to the conference themes: Wave mechanics applied to pile engineering; Relationship between static resistance to driving and long-term static soil resistance; Case histories involving measurementand analysis of stress waves; Dynamic monitoring of driven piles; Dynamic soil-pile interaction models - numerical and physical modeling; High-strain dynamic test; Low-strain dynamic test; Rapid-load test; Monitoring and analysis of vibratory driven piles; Correlation of dynamic and static load tests; Quality assurance of deep foundations using dynamic methods; Incorporation of dynamic testing into design codes and testing standards; Ground vibrations induced by pile motions; Dynamic measurements in ground field testing." "This conference aims to contribute to a better and more efficient professional interaction between specialized contractors, designers and academicians. By joining the contribution of all of them it was possible to elucidate the today's state-of-the-art in science, technology and practice in the application of stress wave theory to piles."--BOOK JACKET.
Download or read book Drilled Shafts written by National Highway Institute (U.S.) and published by . This book was released on 1988 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document was written as a resource for participants in a short course covering the topic of construction and design of drilled shaft foundations for bridges and other structures. It is the second edition of a Federal Highway Administration workbook on construction and design of drilled shafts. The first edition was written in 1988 (FHWA-SA-HI-88-042). While introductory material from the 1988 edition was retained, the emphasis in this document is on providing relatively comprehensive information for engineers who already have some experience with drilled shaft construction and/or design. The initial chapters cover an overview of the characteristics of drilled shafts, site investigations for drilled shafts (to collect information for both construction and design), and details of drilled shaft construction. These chapters are followed by several chapters on the design of drilled shafts in soil and rock for both axial and lateral loading, with examples. Both allowable stress design and load and resistance factor design principles are addressed. Details of design calculations procedures are provided in the appendices.
Download or read book Geotechnical Related Development and Implementation of Load and Resistance Factor Design LRFD Methods written by George G. Goble and published by Transportation Research Board. This book was released on 1999 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: This synthesis report will be of interest to geotechnical, structural, and bridge engineers, especially those involved in the development and implementation of the geotechnical aspects of the AASHTO Bridge Code. The synthesis documents a review of geotechnical related LRFD specifications and their development worldwide to compare them with the current AASHTO LRFD Bridge Code. Design procedures for foundations, earth retaining structures, and culverts are summarized and compared with the methods specified by the AASHTO code. This TRB report provides information designed to assist engineers in implementing the geotechnical features of LRFD methods. Information for the synthesis was collected by surveying U.S. and Canadian transportation agencies and by conducting a literature search using domestic and international sources. Interviews were also conducted with selected international experts. The limited available experience in the United States and information from international practice are discussed to understand the problems that have arisen in order that solutions may be found. Based on the studies reported here, suggestions for improving the code are identified.
Download or read book Indian Geotechnical Conference 2019 written by Satyajit Patel and published by Springer Nature. This book was released on 2021-03-18 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the annual conference of the Indian Geotechnical Society. The conference brings together research and case histories on various aspects of geotechnical and geoenvironmental engineering. The book presents papers on geotechnical applications and case histories, covering topics such as (i) Characterization of Geomaterials and Physical Modelling; (ii) Foundations and Deep Excavations; (iii) Soil Stabilization and Ground Improvement; (iv) Geoenvironmental Engineering and Waste Material Utilization; (v) Soil Dynamics and Earthquake Geotechnical Engineering; (vi) Earth Retaining Structures, Dams and Embankments; (vii) Slope Stability and Landslides; (viii) Transportation Geotechnics; (ix) Geosynthetics Applications; (x) Computational, Analytical and Numerical Modelling; (xi) Rock Engineering, Tunnelling and Underground Constructions; (xii) Forensic Geotechnical Engineering and Case Studies; and (xiii) Others Topics: Behaviour of Unsaturated Soils, Offshore and Marine Geotechnics, Remote Sensing and GIS, Field Investigations, Instrumentation and Monitoring, Retrofitting of Geotechnical Structures, Reliability in Geotechnical Engineering, Geotechnical Education, Codes and Standards, and other relevant topics. The contents of this book are of interest to researchers and practicing engineers alike.
Download or read book Field Tests of Large Diameter Drilled Shafts written by Sharon A. Naramore and published by . This book was released on 1990 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Application of Stress Wave Theory to Piles Quality Assurance on Land and Offshore Piling written by J. Beim and published by CRC Press. This book was released on 2000-01-01 with total page 791 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work collates the topics discussed in the sixth International Conference on land and offshore piling. It covers topics such as: wave mechanics and its application to pile mechanics; driving equipment and developments; and pile integrity and low strain dynamic testing.
Download or read book Drilled Shafts written by Michael W. O'Neill and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rapid Load Testing on Piles written by Paul Holscher and published by CRC Press. This book was released on 2008-08-28 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: To obtain data about the stiffness and bearing capacity of a foundation pile, the Rapid Load Test could be an effective and economic alternative for a static load test. In order to judge this, the influence of rate effects in clay and pore water pressures in sand should first be understood. This book presents the latest developments in the research
Download or read book Conduct and Interpretation of Load Tests on Drilled Shaft Foundations Detailed guidelines written by Anwar Hirany and published by . This book was released on 1988 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rock socketed Shafts for Highway Structure Foundations written by John P. Turner and published by Transportation Research Board. This book was released on 2006 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Synthesis 360: Rock-Socketed Shafts for Highway Structure Foundations explores current practices pertaining to each step of the design process, along with the limitations; identifies emerging and promising technologies; examines the principal challenges in advancing the state of the practice; and investigates future developments and potential improvements in the use and design of rock-socketed shafts.
Download or read book Innovative Bridge Design Handbook written by Alessio Pipinato and published by Elsevier. This book was released on 2021-09-08 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovative Bridge Design Handbook: Construction, Rehabilitation, and Maintenance, Second Edition, brings together the essentials of bridge engineering across design, assessment, research and construction. Written by an international group of experts, each chapter is divided into two parts: the first covers design issues, while the second presents current research into the innovative design approaches used across the world. This new edition includes new topics such as foot bridges, new materials in bridge engineering and soil-foundation structure interaction. All chapters have been updated to include the latest concepts in design, construction, and maintenance to reduce project cost, increase structural safety, and maximize durability. Code and standard references have been updated. - Completely revised and updated with the latest in bridge engineering and design - Provides detailed design procedures for specific bridges with solved examples - Presents structural analysis including numerical methods (FEM), dynamics, risk and reliability, and innovative structural typologies
Download or read book Full Scale Field Tests of Different Types of Piles written by Jialin Zhou and published by Springer Nature. This book was released on 2021 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides full-scale field tests of different types of pile foundations. For the testing, it includes static load tests which consider various loading orientations, dynamic load tests, inclinometer monitoring and tests that aim to determine the load transfer mechanism of pile foundation. This book also covers the up-to-date popular topic with detailed project studies. This includes the academic investigation of post-grouting technology effect on drilled shaft piles, the research of displacement and non-displacement precast pile foundation, the study of fiber-reinforced polymer material used in the geo-technical environment such as deep excavation pit in tunneling project, and the research of super-long and large diameter pile foundations. These investigations provide essential and academic information for researchers as well as engineers in role of Civil and Geotech. Not only the different types of the piles are studied, but also the relevant theory and literatures are reviewed. In this book, the diagrams are plotted in an easy way and the explanation of the diagrams and tables are described in detail. The research methods corresponding to the practical projects are detailed as well. Hence, it is useful as a reference for the students and researchers in civil and geotechnical engineering.
Download or read book Pile Driving by Pile Buck written by Pile Buck International and published by Lulu.com. This book was released on 2009-11-13 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive reference for driven piles. Nearly six years in the making, Pile Driving by Pile Buck is a comprehensive reference book on the history of pile driving and driven piles, the various types of piles, the equipment used to install them, the design of driven pile foundations, the installation of driven piles and the capacity verification of driven piles. Not just another theoretical exercise, Pile Driving by Pile Buck gives practical procedures and equipment configurations for the successful installation of virtually any driven pile foundations. Included with the text are a wealth of photographs without equal in this type of publication; the photos alone are worth the price of the book, and help bring the reader "on site" to understand the whole process of pile driving--one of the oldest construction techniques known.
