Download or read book Dynamic Failure of Materials and Structures written by Arun Shukla and published by Springer Science & Business Media. This book was released on 2009-10-20 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Failure of Materials and Structures discusses the topic of dynamic loadings and their effect on material and structural failure. Since dynamic loading problems are very difficult as compared to their static counterpart, very little information is currently available about dynamic behavior of materials and structures. Topics covered include the response of both metallic as well as polymeric composite materials to blast loading and shock loadings, impact loadings and failure of novel materials under more controlled dynamic loads. These include response of soft materials that are important in practical use but have very limited information available on their dynamic response. Dynamic fragmentation, which has re-emerged in recent years has also been included. Both experimental as well as numerical aspects of material and structural response to dynamic loads are discussed. Written by several key experts in the field, Dynamic Failure of Materials and Structures will appeal to graduate students and researchers studying dynamic loadings within mechanical and civil engineering, as well as in physics and materials science.
Download or read book Dynamic Response and Failure of Composite Materials and Structures written by Valentina Lopresto and published by Woodhead Publishing. This book was released on 2017-05-17 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Response and Failure of Composite Materials and Structures presents an overview of recent developments in a specialized area of research with original contributions from the authors who have been asked to outline needs for further investigations in their chosen topic area. The result is a presentation of the current state-of-the art in very specialized research areas that cannot be found elsewhere in the literature. For example, Massabò presents a newly developed theory for laminated composite plates that accounts for imperfect bonding between layers with new solutions for problems involving thermal effects. This theory is new and computationally-efficient, and the author describes how it fits in the broader context of composite plate theory. Abrate discusses the design of composite marine propellers and presents a detailed derivation of the equations of motion of a rotating blade, including centrifugal effects and the effects of pre-twisting and other geometric parameters. This book is a major reference resource for academic and industrial researchers and designers working in aerospace, automotives, and the marine engineering industry. Presents recent developments in a research field that has experienced tremendous advances because of improved computational capabilities, new materials, and new testing facilities Includes contributions from leading researchers from Europe and the USA who present the current state-of-the-art, including unique and original research Provides extensive experimental results and numerical solutions Appeals to a broad range of professional researchers working in aerospace, automotive, and marine engineering fields
Download or read book Dynamic Failure of Composite and Sandwich Structures written by Serge Abrate and published by Springer Science & Business Media. This book was released on 2012-11-02 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a broad view of the current state of the art regarding the dynamic response of composite and sandwich structures subjected to impacts and explosions. Each chapter combines a thorough assessment of the literature with original contributions made by the authors. The first section deals with fluid-structure interactions in marine structures. The first chapter focuses on hull slamming and particularly cases in which the deformation of the structure affects the motion of the fluid during the water entry of flexible hulls. Chapter 2 presents an extensive series of tests underwater and in the air to determine the effects of explosions on composite and sandwich structures. Full-scale structures were subjected to significant explosive charges, and such results are extremely rare in the open literature. Chapter 3 describes a simple geometrical theory of diffraction for describing the interaction of an underwater blast wave with submerged structures. The second section addresses the problem of impact on laminated composite structures with chapters devoted to ballistic impacts on pre-stressed composite structures, tests developed to simulate dynamic failure in marine structures, damage mechanisms and energy absorption in low velocity impacts, perforation, the numerical simulation of intra and inter-ply damage during impact, and hail impact on laminated composites. Sandwich structures with laminated facings are considered in Section 3 with chapters dealing with the discrete modeling of honeycomb core during the indentation of sandwich structures, the behavior of fold core sandwich structures during impact, and impact on helicopter blades. The fourth section consists of two chapters presenting experimental results and numerical simulation of composite structures subjected to crash. This volume is intended for advanced undergraduate and graduate students, researchers, and engineers interested and involved in analysis and design of composite structures.
Download or read book Dynamic Failure in Composite Materials and Structures written by Y. Rajapakse and published by . This book was released on 2000 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 13 papers from the November 2000 symposium that review and update the progress of research in dynamic failure of composites. The main subject areas are dynamic compressive failure, dynamic fracture and delamination, impact response and damage, energy absorption, and experimental
Download or read book Dynamic Failure in Composite Materials and Structures written by Y. Rajapakse and published by . This book was released on 2001 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Defects and Damage in Composite Materials and Structures written by Rikard Benton Heslehurst and published by CRC Press. This book was released on 2014-04-21 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advantages of composite materials include a high specific strength and stiffness, formability, and a comparative resistance to fatigue cracking and corrosion. However, not forsaking these advantages, composite materials are prone to a wide range of defects and damage that can significantly reduce the residual strength and stiffness of a structu
Download or read book Dynamic Response and Failure of Composite Materials written by Valentina Lopresto and published by Springer Nature. This book was released on 2023-04-24 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest advances and innovations in the field of dynamic loads and testing of composite materials and sandwich structures, as presented by international researchers and engineers at the International Symposium on Dynamic Response and Failure of Composite Materials (DRAF), held in Ischia, Italy, on June 21–24, 2022. Contributions include a wide range of topics such as low and high velocity impacts, smart composites, hull slamming, shock and blast, hail and bird impact, damage resistance and tolerance, failure mechanisms, composite structures, delamination and fractures, progressive damage modeling, micromechanics, ballistic impacts, ceramic and CMC, auxetic materials and structures, additive manufacturing, crashworthiness, green composites, and structural health monitoring.
Download or read book Damage and Fracture of Composite Materials and Structures written by Mohd Nasir Tamin and published by Springer Science & Business Media. This book was released on 2012-01-03 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents recent research findings on fracture properties and behavior of the composites, and their damage and cracking process under both quasi-static and impact loading conditions. Theoretical treatment, experimental investigation and numerical simulation aspects of the mechanics of composites, including sandwich structures are included.
Download or read book Impact Response and Dynamic Failure of Composites and Laminate Materials written by Jang Kyo Kim and published by Trans Tech Publications Ltd. This book was released on 1997-09-04 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: In many engineering applications of composite and laminate materials, damage and failure can be caused by impact of various types. Low-velocity impact is potentially dangerous because it can produce extensive sub-surface delamination that may not be visible on the surface. High-velocity impact produced by projectiles, shock waves and fragments from exploding ammunition is a highly dynamic event, leading to the penetration or perforation of composites. All impact damage is detrimental to the mechanical and structural performance of composites. Accurate evaluation of the damaged state, and a fundamental understanding of the effect of damage upon the resultant properties are therefore essential for the proper design and application of composite materials. The strain-rate dependence of material behavior, fracture propagation and energy-absorbing capacity are also of paramount importance from both the materials science and structural mechanics perspectives.
Download or read book Damage and Failure of Composite Materials written by Ramesh Talreja and published by Cambridge University Press. This book was released on 2012-06-07 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together materials mechanics and modelling, this book provides a complete guide to damage mechanics of composite materials for engineers.
Download or read book Impact Behaviour of Fibre Reinforced Composite Materials and Structures written by S. R. Reid and published by Elsevier. This book was released on 2000-10-12 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study covers impact response, damage tolerance and failure of fibre-reinforced composite materials and structures. Materials development, analysis and prediction of structural behaviour and cost-effective design all have a bearing on the impact response of composites and this book brings together for the first time the most comprehensive and up-to-date research work from leading international experts. State of the art analysis of impact response, damage tolerance and failure of FRC materials Distinguished contributors provide expert analysis of the most recent materials and structures Valuable tool for R&D engineers, materials scientists and designers
Download or read book Advanced Mechanics of Composite Materials written by Valery V. Vasiliev and published by Elsevier. This book was released on 2007-05-16 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials have been representing most significant breakthroughs in various industrial applications, particularly in aerospace structures, during the past thirty five years. The primary goal of Advanced Mechanics of Composite Materials is the combined presentation of advanced mechanics, manufacturing technology, and analysis of composite materials. This approach lets the engineer take into account the essential mechanical properties of the material itself and special features of practical implementation, including manufacturing technology, experimental results, and design characteristics. Giving complete coverage of the topic: from basics and fundamentals to the advanced analysis including practical design and engineering applications. At the same time including a detailed and comprehensive coverage of the contemporary theoretical models at the micro- and macro- levels of material structure, practical methods and approaches, experimental results, and optimisation of composite material properties and component performance. The authors present the results of more than 30 year practical experience in the field of design and analysis of composite materials and structures. * Eight chapters progressively covering all structural levels of composite materials from their components through elementary plies and layers to laminates* Detailed presentation of advanced mechanics of composite materials * Emphasis on nonlinear material models (elasticity, plasticity, creep) and structural nonlinearity
Download or read book Dynamic Deformation Damage and Fracture in Composite Materials and Structures written by Vadim Silberschmidt and published by Elsevier. This book was released on 2022-09-15 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Deformation, Damage and Fracture in Composite Materials and Structures, Second Edition reviews various aspects of dynamic deformation, damage and fracture, mostly in composite laminates and sandwich structures, and in a broad range of application areas including aerospace, automotive, defense and sports engineering. This book examines low- and high-velocity loading and assesses shock, blast and penetrative events, and has been updated to cover important new developments such as the use of additive manufacturing to produce composites, including fiber-reinforced ones. New microstructural, experimental, theoretical, and numerical studies with advanced tools are included as well. The book also features four new chapters covering topics such as dynamic delamination, dynamic deformation and fracture in 3D-printed composites, ballistic impacts with fragmenting projectiles, and the effect of multiple impacting. Examines dynamic deformation and fracture of composite materials, covering experimental, analytical and numerical aspects Features four new chapters covering topics such as dynamic interfacial fracture, fracture in 3D-printed composites, ballistic impacts with fragmenting projectiles, and the effect of multiple impacting Addresses important application areas such as aerospace, automotive, wind energy, defense and sports
Download or read book Major Accomplishments in Composite Materials and Sandwich Structures written by I. M. Daniel and published by Springer Science & Business Media. This book was released on 2009-10-20 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects major research contributions in composite materials and sandwich structures supported by the U.S. Office of Naval Research. It contains over thirty chapters written by experts and serves as a reference and guide for future research.
Download or read book Failure in Composites written by Anthony M. Waas and published by DEStech Publications, Inc. This book was released on 2013 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fourth volume of the ASC series on advanced composites contains critical information on static and dynamic composite failure and how it is predicted and modeled using novel computational methods and micromechanical analysis.
Download or read book Fracture of Nano and Engineering Materials and Structures written by E.E. Gdoutos and published by Springer Science & Business Media. This book was released on 2008-01-08 with total page 1452 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 16th European Conference of Fracture (ECF16) was held in Greece, July, 2006. It focused on all aspects of structural integrity with the objective of improving the safety and performance of engineering structures, components, systems and their associated materials. Emphasis was given to the failure of nanostructured materials and nanostructures including micro- and nano-electromechanical systems (MEMS and NEMS).
Download or read book Mechanics of Composite Structures written by László P. Kollár and published by Cambridge University Press. This book was released on 2003-02-17 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: An increase in the use of composite materials has led to a greater demand for engineers versed in the design of structures made from such materials. This book demonstrates advanced concepts and emphasises structures. More than 300 illustrations, 50 fully worked problems, and material properties data sets are included.