Download or read book Dynamic and Stochastic Multi Project Planning written by Philipp Melchiors and published by Springer. This book was released on 2015-04-24 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with dynamic and stochastic methods for multi-project planning. Based on the idea of using queueing networks for the analysis of dynamic-stochastic multi-project environments this book addresses two problems: detailed scheduling of project activities, and integrated order acceptance and capacity planning. In an extensive simulation study, the book thoroughly investigates existing scheduling policies. To obtain optimal and near optimal scheduling policies new models and algorithms are proposed based on the theory of Markov decision processes and Approximate Dynamic programming. Then the book presents a new model for the effective computation of optimal policies based on a Markov decision process. Finally, the book provides insights into the structure of optimal policies.

Download or read book Analytical and Stochastic Modelling Techniques and Applications written by Marco Gribaudo and published by Springer Nature. This book was released on 2020-11-07 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 25th International Conference on Analytical and Stochastic Modelling Techniques and Applications, ASMTA 2019, held in Moscow, Russia, in October 2019. Methods of analytical and stochastic modelling are widely used in engineering to assess and design various complex systems, like computer and communication networks, and manufacturing systems. The 13 full papers presented in this book were carefully reviewed and selected from 22 submissions. The papers detail a diverse range of analysis techniques, including Markov processes, queueing theoretical results, reliability of stochastic systems, stochastic network calculus, and wide variety of applications.

Download or read book Project Management with Dynamic Scheduling written by Mario Vanhoucke and published by Springer Science & Business Media. This book was released on 2012-02-09 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of this book is known as dynamic scheduling, and is used to refer to three dimensions of project management and scheduling: the construction of a baseline schedule and the analysis of a project schedule’s risk as preparation of the project control phase during project progress. This dynamic scheduling point of view implicitly assumes that the usability of a project’s baseline schedule is rather limited and only acts as a point of reference in the project life cycle. Consequently, a project schedule should especially be considered as nothing more than a predictive model that can be used for resource efficiency calculations, time and cost risk analyses, project tracking and performance measurement, and so on. In this book, the three dimensions of dynamic scheduling are highlighted in detail and are based on and inspired by a combination of academic research studies at Ghent University (www.ugent.be), in-company trainings at Vlerick Leuven Gent Management School (www.vlerick.com) and consultancy projects at OR-AS (www.or-as.be). First, the construction of a project baseline schedule is a central theme throughout the various chapters of the book, and is discussed from a complexity point of view with and without the presence of project resources. Second, the creation of an awareness of the weak parts in a baseline schedule is discussed at the end of the two baseline scheduling parts as schedule risk analysis techniques that can be applied on top of the baseline schedule. Third, the baseline schedule and its risk analyses can be used as guidelines during the project control step where actual deviations can be corrected within the margins of the project’s time and cost reserves.

Download or read book Computer Performance Engineering written by Philipp Reinecke and published by Springer. This book was released on 2017-08-31 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 14th EuropeanWorkshop on Computer Performance Engineering, EPEW 2017, held in Berlin,Germany, in September 2017. The 18 papers presented together with the abstracts of two invited talks in this volume were carefully reviewed and selected from 30 submissions. The papers presented at the workshop reflect the diversity of modern performanceengineering, with topics ranging from advances in Markov models; advances in quantitative analysis; model checking; and cyber-physical systems to performance, energy and security.

Download or read book Perspectives and Techniques for Improving Information Technology Project Management written by Wang, John and published by IGI Global. This book was released on 2013-01-31 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Perspectives and Techniques for Improving Information Technology Project Management discusses the variety of information systems and how it can improve project management and, likewise, how project management can affect the growth of information systems. Using new frameworks, technologies and methods, this comprehensive collection is useful for professionals, researchers and software developers interested in learning more on this emerging field.

Download or read book Managing Multiple Projects written by Lowell Dye and published by CRC Press. This book was released on 2002-06-04 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Details time-efficient and cost-effective strategies to evaluate, select, prioritize, plan, and manage multiple projects. Presents proven methods and practical applications for the development of successful project portfolios and prosperous multiproject environments. Provides useful models and scheduling frameworks for increasecd quality and productivity."

Download or read book Healthcare Operations Management written by Qiang Su and published by Springer Nature. This book was released on 2022-09-13 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressing the entire care chain, this book presents the outcomes of advanced research on healthcare operations management based on real-world data and practices in China. It includes hands-on methods and applications in this interdisciplinary research field, which combines healthcare service, operations management, industrial engineering and information technology. The content is divided into three parts, reflecting the entire care chain. The first part discusses the pre-hospital service stage and explores resource deployment problems in emergency medical service, such as ambulance allocation. The second part focuses on inpatient care services, including staffing and task allocation among nurses and doctors based on multi-project management under uncertainties. In addition, a highly promising diagnosis approach is proposed and a specific algorithm is derived on the basis of real-world datasets which can improve the diagnosis accuracy remarkably. In turn, the third part considers the post-hospital service stage, which most often takes place at community hospitals, and provides a quantitative evaluation and optimization of scheduling for tasks and team members for home care services. The book is intended for a broad audience, including students, researchers and practitioners working in various areas of healthcare management, service management, and operations management.

Download or read book Stochastic Project Networks written by Klaus Neumann and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Project planning, scheduling, and control are regularly used in business and the service sector of an economy to accomplish outcomes with limited resources under critical time constraints. To aid in solving these problems, network-based planning methods have been developed that now exist in a wide variety of forms, cf. Elmaghraby (1977) and Moder et al. (1983). The so-called "classical" project networks, which are used in the network techniques CPM and PERT and which represent acyclic weighted directed graphs, are able to describe only projects whose evolution in time is uniquely specified in advance. Here every event of the project is realized exactly once during a single project execution and it is not possible to return to activities previously carried out (that is, no feedback is permitted). Many practical projects, however, do not meet those conditions. Consider, for example, a production process where some parts produced by a machine may be poorly manufactured. If an inspection shows that a part does not conform to certain specifications, it must be repaired or replaced by a new item. This means that we have to return to a preceding stage of the production process. In other words, there is feedback. Note that the result of the inspection is that a certain percentage of the parts tested do not conform. That is, there is a positive probability (strictly less than 1) that any part is defective.

Download or read book Computational Intelligence in Engineering and Project Management written by Pedro Yobanis Piñero Pérez and published by Springer Nature. This book was released on with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Issues in Engineering Research and Application 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 891 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Engineering Research and Application: 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Engineering Research and Application. The editors have built Issues in Engineering Research and Application: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Engineering Research and Application in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Engineering Research and Application: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Download or read book An Introduction to Project Modeling and Planning written by Gündüz Ulusoy and published by Springer Nature. This book was released on 2021-04-05 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook teaches the basic concepts and methods of project management but also explains how to convert them to useful results in practice. Project management offers a promising working area for theoretical and practical applications, and developing software and decision support systems (DSS). This book specifically focuses on project planning and control, with an emphasis on mathematical modeling. Models and algorithms establish a good starting point for students to study the relevant literature and support pursuing academic work in related fields. The book provides an introduction to theoretical concepts, and it also provides detailed explanations, application examples, and case studies that deal with real-life problems. The chapter topics include questions that underlie critical thinking, interpretation, analytics, and making comparisons. Learning outcomes are defined and the content of the book is structured following these goals. Chapter 1 begins by introducing the basic concepts, methods, and processes of project management. This Chapter constitutes the base for defining and modeling project management problems. Chapter 2 explores the fundamentals of organizing and managing projects from an organization’s perspective. Issues related to project team formation, the role of project managers, and organization types are discussed. Chapter 3 is devoted to project planning and network modeling of projects, covering fundamental concepts such as project scope, Work Breakdown Structure (WBS), Organizational Breakdown Structure (OBS), Cost Breakdown Structure (CBS), project network modeling, activity duration, and cost estimating, activity-based costing (ABC), data and knowledge management. Chapter 4 introduces deterministic scheduling models, which can be used in constructing the time schedules. Models employing time-based and finance-based objectives are introduced. The CPM is covered. The unconstrained version of maximizing Net Present Value (NPV) is also treated here together with the case of time-dependent cash flows. Chapter 5 focuses on the time/cost trade-off problem, explaining how to reduce the duration of some of the activities and therefore reduce the project duration at the expense of additional costs. This topic is addressed for both continuous and discrete cases. Chapter 6 discusses models and methods of scheduling under uncertain activity durations. PERT is introduced for minimizing the expected project duration and extended to the PERT-Costing method for minimizing the expected project cost. Simulation is presented as another approach for dealing with the uncertainty in activity durations and costs. To demonstrate the use of the PERT, a case study on constructing an earthquake-resistant residential house is presented. Classifications of resource and schedule types are given in Chapter 7, and exact and heuristic solution procedures for the single- and multi-mode resource constrained project scheduling problem (RCPSP) are presented. The objective of maximizing NPV under resource constraints is addressed, and the capital-constrained project scheduling model is introduced. In Chapter 8, resource leveling, and further resource management problems are introduced. Total adjustment cost and resource availability cost problems are introduced. Various exact models are investigated. A heuristic solution procedure for the resource leveling problem is presented in detail. Also, resource portfolio management policies and the resource portfolio management problem are discussed. A case study on resource leveling dealing with the annual audit project of a major corporation is presented. Project contract types and payment schedules constitute the topics of Chapter 9. Contracts are legal documents reflecting the results of some form of client-contractor negotiations and sometimes of a bidding process, which deserve closer attention. Identification and allocation of risk in contracts, project control issues, disputes, and resolution management are further topics covered in this Chapter. A bidding model is presented to investigate client-contractor negotiations and the bidding process from different aspects. Chapter 10 focuses on processes and methods for project monitoring and control. Earned Value Management is studied to measure the project performance throughout the life of a project and to estimate the expected project time and cost based on the current status of the project. How to incorporate inflation into the analysis is presented. In Chapter 11, qualitative and quantitative techniques including decision trees, simulation, and software applications are introduced. Risk phases are defined and building a risk register is addressed. An example risk breakdown structure is presented. The design of risk management processes is introduced, and risk response planning strategies are discussed. At the end of the Chapter, the quantitative risk analysis is demonstrated at the hand of a team discussion case study. Chapter 12 covers several models and approaches dealing with various stochastic aspects of the decision environment. Stochastic models, generation of robust schedules, use of reactive and fuzzy approaches are presented. Sensitivity and scenario analysis are introduced. Also, simulation analysis, which is widely used to analyze the impacts of uncertainty on project goals, is presented. Chapter 13 addresses repetitive projects that involve the production or construction of similar units in batches such as railway cars or residential houses. Particularly in the construction industry repetitive projects represent a large portion of the work accomplished in this sector of the economy. A case study on the 50 km section of a motorway project is used for demonstrating the handling of repetitive project management. How best to select one or more of a set of candidate projects to maintain a project portfolio is an important problem for project-based organizations with limited resources. The project selection problem is inherently a multi-objective problem and is treated as such in Chapter 14. Several models and solution techniques are introduced. A multi-objective, multi-period project selection and scheduling model is presented. A case study that addresses a project portfolio selection and scheduling problem for the construction of a set of dams in a region is presented. Finally, Chapter 15 discusses three promising research areas in project management in detail: (i) Sustainability and Project Management, (ii) Project Management in the Era of Big Data, and (iii) the Fourth Industrial Revolution and the New Age Project Management. We elaborate on the importance of sustainability in project management practices, discuss how developments in data analytics might impact project life cycle management, and speculate how the infinite possibilities of the Fourth Industrial Revolution and the new technologies will transform project management practices.

Download or read book Handbook on Project Management and Scheduling Vol 2 written by Christoph Schwindt and published by Springer. This book was released on 2015-01-13 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the increasing importance of product differentiation and collapsing product life cycles, a growing number of value-adding activities in the industry and service sector are organized in projects. Projects come in many forms, often taking considerable time and consuming a large amount of resources. The management and scheduling of projects represents a challenging task and project performance may have a considerable impact on an organization's competitiveness. This handbook presents state-of-the-art approaches to project management and scheduling. More than sixty contributions written by leading experts in the field provide an authoritative survey of recent developments. The book serves as a comprehensive reference, both, for researchers and project management professionals. The handbook consists of two volumes. Volume 1 is devoted to single-modal and multi-modal project scheduling. Volume 2 presents multi-project problems, project scheduling under uncertainty and vagueness, managerial approaches and a separate part on applications, case studies and information systems.

Download or read book Advanced Models for Project Management written by L. Valadares Tavares and published by Springer Science & Business Media. This book was released on 1999 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of project management has developed over the past 40 years; however, the recent increase in computer power has greatly accelerated its theoretical and computational developments. Advanced Models for Project Management is an expository treatment of the recent developments in project modeling. These advances and their treatment in the book are as follows: Chapters 2 and 3 broaden the concept of precedence and the description of activities to produce a wide range of realistic representation of projects. Chapters 4 and 5 explore the stochastic study of project features through several analytical and numerical models - using simulation and risk analysis - which provide experimental and forecasting analyses. Chapter 6 examines the allocation of resources in complex situations and restrictions, and also studies the financial aspects of projects and optimization of financial elements. Chapter 7 assesses and evaluates projects within the framework of multi-criteria decision theory. Chapter 8 concludes with an analysis of new models based on synthetic indicators, helping the operations manager select the most convenient solutions. Hence, the book provides a number of original advances, including: an assessment of the complexity and hardness of a project network; a description of the network's morphology; a new approach to simulate project networks; development of models based on continuous variables to optimize project schedules; and the development of a three-dimension model (MACMODEL) to assess and to evaluate projects and a new synthetic indicator to support the process of scheduling. Finally, several software products are presented that help the project manager to use new tools such as RISKNET and MACMODEL.

Download or read book Progress in Improving Project Management at the Department of Energy written by National Research Council and published by National Academies Press. This book was released on 2002-01-31 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Department of Energy (DOE) is engaged in numerous multimillion- and even multibillion-dollar projects that are one of a kind or first of a kind and require cutting-edge technology. The projects represent the diverse nature of DOE's missions, which encompass energy systems, nuclear weapons stewardship, environmental restoration, and basic research. Few other government or private organizations are challenged by projects of a similar magnitude, diversity, and complexity. To complete these complex projects on schedule, on budget, and in scope, the DOE needs highly developed project management capabilities. This report is an assessment of the status of project management in the Department of Energy as of mid-2001 and the progress DOE has made in this area since the National Research Council (NRC) report Improving Project Management in the Department of Energy (Phase II report) was published in June 1999.

Download or read book Schedule Based Modeling of Transportation Networks written by Nigel H. M. Wilson and published by Springer Science & Business Media. This book was released on 2008-10-22 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Schedule-Based Modeling of Transportation Networks: Theory and Applications" follows the book Schedule-Based Dynamic Transit Modeling, published in this series in 2004, recognizing the critical role that schedules play in transportation systems. Conceived for the simulation of transit systems, in the last few years the schedule-based approach has been expanded and applied to operational planning of other transportation schedule services besides mass transit, e.g. freight transport. This innovative approach allows forecasting the evolution over time of the on-board loads on the services and their time-varying performance, using credible user behavioral hypotheses. It opens new frontiers in transportation modeling to support network design, timetable setting, and investigation of congestion effects, as well as the assessment of such new technologies, such as users system information (ITS technologies).

Download or read book Handbook on Project Management and Scheduling Vol 1 written by Christoph Schwindt and published by Springer. This book was released on 2015-01-13 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the increasing importance of product differentiation and collapsing product life cycles, a growing number of value-adding activities in the industry and service sector are organized in projects. Projects come in many forms, often taking considerable time and consuming a large amount of resources. The management and scheduling of projects represents a challenging task, and project performance may have a considerable impact on an organization's competitiveness. This handbook presents state-of-the-art approaches to project management and scheduling. More than sixty contributions written by leading experts in the field provide an authoritative survey of recent developments. The book serves as a comprehensive reference, both, for researchers and project management professionals. The handbook consists of two volumes. Volume 1 is devoted to single-modal and multi-modal project scheduling. Volume 2 presents multi-project problems, project scheduling under uncertainty and vagueness, managerial approaches and a separate part on applications, case studies and information systems.

Download or read book Functional Thinking for Value Creation written by Jürgen Hesselbach and published by Springer Science & Business Media. This book was released on 2011-03-18 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: After the IPS2 conferences in Cranfield and Linköping in 2009 and 2010 the 3rd CIRP International Conference on Industrial Product Service Systems (IPS2) 2011 takes place in Braunschweig, Germany. IPS2 itself is defined as “an integrated industrial product and service offering that delivers value in use”. The customers expect comprehensive solutions, which are adapted to their individual needs. IPS2 offers the possibility to stand out from competition and for long-term customer loyalty. Particularly in times of economic crisis it becomes apparent which producing companies understand to satisfy the needs and requirements of their customers. Especially in this relatively new domain IPS2 it will be important to keep track of the whole context and to seek cooperation with other research fields and disciplines. The 3rd CIRP International Conference on Industrial Product Service Systems (IPS2) 2011 serves as a platform for such collaborations and the discussion of new scientific ideas.