Download or read book Dynamic Analysis of Non Linear Structures by the Method of Statistical Quadratization written by M.G. Donley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. 1 Introduction As offshore oil production moves into deeper water, compliant structural systems are becoming increasingly important. Examples of this type of structure are tension leg platfonns (TLP's), guyed tower platfonns, compliant tower platfonns, and floating production systems. The common feature of these systems, which distinguishes them from conventional jacket platfonns, is that dynamic amplification is minimized by designing the surge and sway natural frequencies to be lower than the predominant frequencies of the wave spectrum. Conventional jacket platfonns, on the other hand, are designed to have high stiffness so that the natural frequencies are higher than the wave frequencies. At deeper water depths, however, it becomes uneconomical to build a platfonn with high enough stiffness. Thus, the switch is made to the other side of the wave spectrum. The low natural frequency of a compliant platfonn is achieved by designing systems which inherently have low stiffness. Consequently, the maximum horizontal excursions of these systems can be quite large. The low natural frequency characteristic of compliant systems creates new analytical challenges for engineers. This is because geometric stiffness and hydrodynamic force nonlinearities can cause significant resonance responses in the surge and sway modes, even though the natural frequencies of these modes are outside the wave spectrum frequencies. High frequency resonance responses in other modes, such as the pitch mode of a TLP, are also possible.
Download or read book Linearization Methods for Stochastic Dynamic Systems written by Leslaw Socha and published by Springer Science & Business Media. This book was released on 2007-12-20 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: For most cases of interest, exact solutions to nonlinear equations describing stochastic dynamical systems are not available. This book details the relatively simple and popular linearization techniques available, covering theory as well as application. It examines models with continuous external and parametric excitations, those that cover the majority of known approaches.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1992 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonlinear Dynamics and Stochastic Mechanics written by Wolfgang Kliemann and published by CRC Press. This book was released on 2018-05-04 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering systems have played a crucial role in stimulating many of the modern developments in nonlinear and stochastic dynamics. After 20 years of rapid progress in these areas, this book provides an overview of the current state of nonlinear modeling and analysis for mechanical and structural systems. This volume is a coherent compendium written by leading experts from the United States, Canada, Western and Eastern Europe, and Australia. The 22 articles describe the background, recent developments, applications, and future directions in bifurcation theory, chaos, perturbation methods, stochastic stability, stochastic flows, random vibrations, reliability, disordered systems, earthquake engineering, and numerics. The book gives readers a sophisticated toolbox that will allow them to tackle modeling problems in mechanical systems that use stochastic and nonlinear dynamics ideas. An extensive bibliography and index ensure this volume will remain a reference standard for years to come.
Download or read book Nonlinear Analysis of Structures 1997 written by Muthukrishnan Sathyamoorthy and published by CRC Press. This book was released on 2017-11-22 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Analysis of Structures presents a complete evaluation of the nonlinear static and dynamic behavior of beams, rods, plates, trusses, frames, mechanisms, stiffened structures, sandwich plates, and shells. These elements are important components in a wide variety of structures and vehicles such as spacecraft and missiles, underwater vessels and structures, and modern housing. Today's engineers and designers must understand these elements and their behavior when they are subjected to various types of loads. Coverage includes the various types of nonlinearities, stress-strain relations and the development of nonlinear governing equations derived from nonlinear elastic theory. This complete guide includes both mathematical treatment and real-world applications, with a wealth of problems and examples to support the text. Special topics include a useful and informative chapter on nonlinear analysis of composite structures, and another on recent developments in symbolic computation. Designed for both self-study and classroom instruction, Nonlinear Analysis of Structures is also an authoritative reference for practicing engineers and scientists. One of the world's leaders in the study of nonlinear structural analysis, Professor Sathyamoorthy has made significant research contributions to the field of nonlinear mechanics for twenty-seven years. His foremost contribution to date has been the development of a unique transverse shear deformation theory for plates undergoing large amplitude vibrations and the examination of multiple mode solutions for plates. In addition to his notable research, Professor Sathyamoorthy has also developed and taught courses in the field at universities in India, Canada, and the United States.
Download or read book Nonlinearity in Structural Dynamics written by K Worden and published by CRC Press. This book was released on 2019-04-23 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many types of engineering structures exhibit nonlinear behavior under real operating conditions. Sometimes the unpredicted nonlinear behavior of a system results in catastrophic failure. In civil engineering, grandstands at sporting events and concerts may be prone to nonlinear oscillations due to looseness of joints, friction, and crowd movements.
Download or read book Random Vibration and Statistical Linearization written by John Brian Roberts and published by Courier Corporation. This book was released on 2003-12-09 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This self-contained volume explains the general method of statistical linearization and its use in solving random vibration problems. Numerous examples show advanced undergraduate and graduate students many practical applications. 1990 edition.
Download or read book Nonlinear Stochastic Mechanics written by Nicola Bellomo and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Symposium, held in Torino (lSI, Villa Gualino) July 1-5, 1991 is the sixth of a series of IUTAM-Symposia on the application of stochastic analysis to continuum and discrete mechanics. The previous one, held in Innsbruck (1987), was mainly concentrated on qual itative and quantitative analysis of stochastic dynamical systems as well as on bifurcation and transition to chaos of deterministic systems. This Symposium concentrated on fundamental aspects (stochastic analysis and mathe matical methods), on specific applications in various branches of mechanics, engineering and applied sciences as well as on related fields as analysis of large systems, system identifica tion, earthquake prediction. Numerical methods suitable to provide quantitative results, say stochastic finite elements, approximation of probability distribution and direct integration of differential equations have also been the object of interesting presentations. Specific topics of the sessions have been: Engineering Applications, Equivalent Lineariza tion of Discrete Stochastic Systems, Fatigue and Life Estimation, Fluid Dynamics, Numerical Methods, Random Vibration, Reliability Analysis, Stochastic Differential Equations, System Identification, Stochastic Control. We are indebted to the IUTAM Bureau for having promoted and sponsored this Sympo sium and the Scientific Committee for having collaborated to the selection of participants and lecturers as well as to a prompt reviewing of the papers submitted for publication into these proceedings. A special thank is due to Frank Kozin: the organization of this meeting was for him ';ery important; he missed the meeting but his organizer ability was present.
Download or read book Stochastic Structural Dynamics 2 written by I. Elishakoff and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains eighteen selected papers presented at the Second International Conference on Stochastic Structural Dynamics, which are related to new practical applications in the field. This and a companion volume, related to new theoretical developments, constitute the proceedings of the conference, and reflect the state of the art of the rapidly developing subject. The conference was held in Boca Raton, Florida during May 9-11, 1990 hosted by the Center for Applied Stochastic Research of Florida Atlantic University. A total of 20 technical sessions were organized, and attended by eighty participants from 12 countries. Special emphases of the conference were placed on two areas: applications to earthquake engineering and stochastic stability of nonlinear systems. Two sessions were dedicated to the memory of late Professor Frank Kozin, one of the founders and most active contributors to the stochastic stability theory. We are indebted to the National Center for Earthquake Engineering Research (NCEER) for financial support. Most credit belongs to each of the authors whose contributions were the very basis for the undoubted success of the conference. We are grateful to the reviewers who carefully refereed the contributions for these two volumes. Our special thanks are due to Mrs. Christine Mikulski, who carried out all the necessary secretarial tasks associated with the conference with dedication.
Download or read book Stochastic Dynamics of Marine Structures written by Arvid Naess and published by Cambridge University Press. This book was released on 2013 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: For students and professionals, this covers theory and methods for stochastic modelling and analysis of marine structures under environmental loads.
Download or read book Multifaceted Uncertainty Quantification written by Isaac Elishakoff and published by Walter de Gruyter GmbH & Co KG. This book was released on 2024-09-23 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book exposes three alternative and competing approaches to uncertainty analysis in engineering. It is composed of some essays on various sub-topics like random vibrations, probabilistic reliability, fuzzy-sets-based analysis, unknown-but-bounded variables, stochastic linearization, possible difficulties with stochastic analysis of structures.
Download or read book Stochastically Excited Nonlinear Ocean Structures written by Michael F Shlesinger and published by World Scientific. This book was released on 1998-03-26 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ocean structures, including ships, boats, piers, docks, rigs and platforms, are subject to fair weather wind and waves, as well as violent storms. A scientific analysis of these structures, under varying conditions, requires a mix of civil engineering, physics and applied mathematics. Chapters by experts in these fields are presented which explore the nonlinear responses of ocean structures to stochastic forcing. Theoretical methods calculate aspects of time, frequency and phase space responses. Probabilities governed by stochastic differential equations are investigated directly or through moment correlations, such as power spectra. Calculations can also involve level crossing statistics and first passage times. This book will help scientists study stochastic nonlinear equations and help engineers design for short term survivability of structures in storms and long life in the face of everyday fatigue.
Download or read book Uncertainty Modeling In Vibration Control And Fuzzy Analysis Of Structural Systems written by Bilal M Ayyub and published by World Scientific. This book was released on 1997-09-16 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an overview of the current state of uncertainty modeling in vibration, control, and fuzzy analysis of structural and mechanical systems. It is a coherent compendium written by leading experts and offers the reader a sampling of exciting research areas in several fast-growing branches in this field. Uncertainty modeling and analysis are becoming an integral part of system definition and modeling in many fields. The book consists of ten chapters that report the work of researchers, scientists and engineers on theoretical developments and diversified applications in engineering systems. They deal with modeling for vibration, control, and fuzzy analysis of structural and mechanical systems under uncertain conditions. The book designed for readers who are familiar with the fundamentals and wish to study a particular topic or use the book as an authoritative reference. It gives readers a sophisticated toolbox for tackling modeling problems in mechanical and structural systems in real-world situations. The book is part of a series on Stability, Vibration and Control of Structures, and provides vital information in these areas.
Download or read book Computational Tensor Analysis of Shell Structures written by Steve Naomis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a method which is capable of evaluating the deformation characteristics of thin shell structures A free vibration analysis is chosen as a convenient means of studying the displacement behaviour of the shell, enabling it to deform naturally without imposing any particular loading conditions. The strain-displacement equations for thin shells of arbitrary geometry are developed. These relationships are expressed in general curvilinear coordinates and are formulated entirely in the framework of tensor calculus. The resulting theory is not restricted to shell structures characterized by any particular geometric form, loading or boundary conditions. The complete displacement and strain equations developed by Flugge are approximated by the curvilinear finite difference method and are applied to computing the natural frequencies and mode shapes of general thin shells. This approach enables both the displacement components and geometric properties of the shell to be approximated numerically and accurately. The selection of an appropriate displacement field to approximate the deformation of the shell within each finite difference mesh is discussed in detail. In addition, comparisons are made between the use of second and third-order finite difference interpolation meshes.
Download or read book Shape Design Sensitivity Analysis and Optimization Using the Boundary Element Method written by Zhiye Zhao and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates the various aspects of shape optimization of two dimensional continuum structures, including shape design sensitivity analysis, structural analysis using the boundary element method (BEM), and shape optimization implementation. The book begins by reviewing the developments of shape optimization, followed by the presentation of the mathematical programming methods for solving optimization problems. The basic theory of the BEM is presented which will be employed later on as the numerical tool to provide the structural responses and the shape design sensitivities. The key issue of shape optimization, the shape design sensitivity analy sis, is fully investigated. A general formulation of stress sensitivity using the continuum approach is presented. The difficulty of the modelling of the ad joint problem is studied, and two approaches are presented for the modelling of the adjoint problem. The first approach uses distributed loads to smooth the concentrated adjoint loads, and the second approach employs the singu larity subtraction method to remove the singular boundary displacements and tractions from the BEM equation. A novel finite difference based approach to shape design sensitivity is pre sented, which overcomes the two drawbacks of the conventional finite difference method. This approach has the advantage of being simple in concept, and eas ier implementation. A shape optimization program for two-dimensional continuum structures is developed, including structural analysis using the BEM, shape design sensitiv ity analysis, mathematical programming, and the design boundary modelling.
Download or read book Reliability and Optimization of Structural Systems 90 written by A. Der Kiureghian and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume contains papers presented at the Third Scientific Meeting of the IFIP Working Group on "Reliabilty and Optimization of Structural Systems". The contributions reflect recent developments in the field of modern structural systems optimization and reliability theory and point out directions for further research. Also perspectives for the education in this field were discussed.
Download or read book Reliability and Optimization of Structural Systems 91 written by Rüdiger Rackwitz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume contains 38 papers presented at the 4th Working Conference on "Rel iability· and Optimization of Structural Systems", held at the Technical University of Munich, Germany, September 11- 13, 1991. The Working Conference was organised by the IFIP (Interna tional Federation for Information Processing) Working Group 7.5 of Technical Committee 7 and was the fourth in a series, following similar conferences held at the University of Aalborg, Den mark, May 1987, at the Imperial College, London, UK, September 1988 and at the University of California, Berkeley, California, USA, March 1990. The Working Conference was attended by 54 participants from 16 countries. The objectives of Working Group 7.5 are: • to promote modern structural systems optimization and reliability theory, • to advance international cooperation in the field of structural system optimization and reliability theory, • to stimulate research, development and application of structural system optimization and reli ability theory, • to further the dissemination and exchange of information on reliability and optimization of structural systems • to encourage education in structural system optimization and reliability theory. At present the members of the Working Group are: A. H.-S. Ang, U.S.A. M. Grimmelt, FRG G. A ugwti, Italy N. C. Lind, Canada M. J. Baker, UK H. O. Mad&en, Denmark P. Bjerager, Norway R. E. Melcher~, Australia C. A. Cornell, U.S.A. F. Mo~e~, U.S.A.