Download or read book Ductility and Formability of Metals written by Giovanni Straffelini and published by Elsevier. This book was released on 2023-03-23 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ductility and Formability of Metals: A Metallurgical Engineering Perspective uses metallurgical, mechanical and physical principles and concepts to explain ductility while emphasizing the influence of material microstructure on damage mechanisms. Focusing on steel, aluminum, copper, titanium and magnesium alloys, the book examines the strain hardening behaviors of these metals and alloys, the influence of strain rate and temperature, and ductile fracture mechanics. Hot plastic deformation is covered with special consideration given to its interplay with recrystallization phenomena. Other phenomena such as Dynamic Strain Ageing (DSA) and Adiabatic Shear Banding (ASB) are discussed, and metal working applications such as forging, extrusion and machining are included throughout. Methods for control of ductile cracks in metal parts resulting from rolling, forging, extrusion, drawing, and sheet metal forming are also outlined. Provides an overview on the plastic deformation behavior and ductile fracture of steel, aluminum, copper, titanium and magnesium alloys Illustrates the influence of microstructure on yield behavior, strain hardening of metals, and the influence of strain rate and temperature Covers the role of the strain hardening coefficient (n), strain rate index (m), Dynamic Strain Ageing (DSA), and Adiabatic Shear Banding (ASB) Metalworking applications are provided throughout, including forging, rolling, extrusion, wire drawing, sheet metal forming and machining
Download or read book Applied Metal Forming written by Henry S. Valberg and published by Cambridge University Press. This book was released on 2010-03-31 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Metal Forming: Including FEM Analysis describes metal forming theory and how experimental techniques can be used to study any metal forming operation with great accuracy. For each primary class of processes, such as forging, rolling, extrusion, wiredrawing, and sheet-metal forming, it explains how FEA (Finite Element Analysis) can be applied with great precision to characterize the forming condition and in this way optimize the processes. FEA has made it possible to build very realistic FEM-models of any metal forming process, including complex three-dimensional forming operations, in which complex products are shaped by complex dies. Thus, using FEA it is now possible to visualize any metal forming process and to study strain, stresses, and other forming conditions inside the parts being manufactured as they develop throughout the process.
Download or read book Formability written by Wilko C. Emmens and published by Springer Science & Business Media. This book was released on 2011-07-23 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: - Overview of materials and treatment aspects of manufacturability of sheet metal - Written by an industrial expert turned scientist - Concentrates on the formability of sheet metal, one of the fundamental form material is used in metalworking
Download or read book Formability and Workability of Metals written by S. L. Semiatin and published by ASM International(OH). This book was released on 1984 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Formability of Metallic Materials 2 000 A D written by John R. Newby and published by ASTM International. This book was released on 1982 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Formatibility Topics written by B. A. Niemier and published by ASTM International. This book was released on 1978-08 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Formability of Metallic Materials written by D. Banabic and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: After a brief introduction into crystal plasticity,the fun- damentals of crystallographic textures and plastic anisotro- py, a main topic of this book, are outlined. A large chapter is devoted to formability testing both for bulk metal and sheet metal forming. For the first time testing methods for plastic anisotropy of round bars and tubes are included. A profound survey is given of literature about yield criteria for anisotropic materials up to most recent developments and the calculation of forming limits of anisotropic sheet me- tal. Other chapters are concerned with properties of workpieces after metal forming as well as the fundamentals of the theory of plasticity and finite element simulation of metal forming processes. The book is completed by a collection of tables of international standards for formability testing and of flow curves of metals which are most commonly used in metal forming. It is addressed both to university and industrial readers.
Download or read book Metal Forming Interrelation Between Theory and Practice written by A. L. Hoffmanner and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: On October 21 and 22, 1970, the Shaping and Forming Committee, Institute of Metals Division, The Metallurgical Society of AlME, held a Conference on "The Relation Between Theory and Practice it). Metal Forming" at the Sheraton-Cleveland Hotel during the Fall Meeting of AIME in Cleveland, Ohio. This conference was devoted to recent applications of theory to metal forming to establish a milestone in the current ability to predict phenomena during deformation processing and, thereby, demonstrate the utility of theory for process design. The papers were selected by first requesting presentations of relevant recent work from 68 recognized authorities in metal forming which resulted in 17 papers. A sub sequent call for papers resulted in the submission of 19 abstracts from which 4 papers were selected. The selection criteria required that the paper coupled theory with practice, and that the work was recent, unpublished and worthy of permanent record. The selection was performed by the Conference Chairman. The papers in this volume have been organized in accordance with the following subjects: Extrusion Drawing and Sheet Metal Forming Forming Loads and Friction Workability These papers appear to assess the salient recent applications of mechanics to the deformation processing of alloys at the present time, i. e. , circa 1970, A, L. Hoffmanner Conference Chairman May, 1970 vii LIST OF CONTRIBUTORS Taylan Altan, Metalworking Division, Columbus Laboratories, Battelle Memorial Institute, Columbus, Ohio W. A.
Download or read book Sheet Metal Forming written by R. Pearce and published by Springer Science & Business Media. This book was released on 1991-12-31 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: The pressing of sheet metal into useful shapes is a technology which requires an understanding of a wide range of subjects. This text is divided into three sections: processes, materials and tests. In Part 1, sheet metal forming is examined mainly from a mechanical engineering viewpoint; firstly plasticity and anisotropy, then process variables - friction, lubrication and temperature - and finally practical aspects of forming in the press-shop. Part 2 deals with the main sheet alloys at varying lengths, depending on their industrial popularity. Certain research results, showing the fallibility of the phenomenological approach, are also highlighted. A section of testing procedures concludes the volume.
Download or read book Deformation and Fracture Mechanics of Engineering Materials written by Richard W. Hertzberg and published by . This book was released on 1989-01-17 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Third Edition of the well-received engineering materials book has been completely updated, and now contains over 1,100 citations. Thorough enough to serve as a text, and up-to-date enough to serve as a reference. There is a new chapter on strengthening mechanisms in metals, new sections on composites and on superlattice dislocations, expanded treatment of cast and powder-produced conventional alloys, plastics, quantitative fractography, JIC and KIEAC test procedures, fatigue, and failure analysis. Includes examples and case histories.
Download or read book Mechanics of Sheet Metal Forming written by D. Koistinen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume records the proceedings of an international symposium on "ME CHANICS OF SHEET METAL FORMING: Material Behavior and Deformation Analysis." It was sponsored and held at the General Motors Research Labora tories on October 17-18, 1977. This symposium was the twenty-first in an annual series. The objective of this symposium was to discuss the research frontiers in experimental and theoretical methods of sheet metal forming analysis and, also, to determine directions of future research to advance technology that would be useful in metal stamping plants. Metal deformation analyses which provide guide lines for metal flanging are already in use. Moreover, recent advances in computer techniques for solving plastic flow equations and in measurements of material parameters are leading to dynamic models of many stamping operations. These models would accurately predict the stresses and strains in the sheet as a function of punch travel. They would provide the engineer with the knowledge he needs to improve die designs. The symposium papers were organized into five sessions: the state of the art, constitutive relations of sheet metal, role of friction, sheet metal formability, and deformation analysis of stamping operations. We believe this volume not only summarizes the various viewpoints at the time of the symposium, but also pro vides an outlook for materials and mechanics research in the future.
Download or read book Handbook of Workability and Process Design written by George E. Dieter and published by ASM International. This book was released on 2003-01-01 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Properties and Working of Metals and Alloys written by Amit Bhaduri and published by Springer. This book was released on 2018-05-12 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to serve as core text or handy reference on two key areas of metallic materials: (i) mechanical behavior and properties evaluated by mechanical testing; and (ii) different types of metal working or forming operations to produce useful shapes. The book consists of 16 chapters which are divided into two parts. The first part contains nine chapters which describe tension (including elastic stress – strain relation, relevant theory of plasticity, and strengthening methods), compression, hardness, bending, torsion – pure shear, impact loading, creep and stress rupture, fatigue, and fracture. The second part is composed of seven chapters and covers fundamentals of mechanical working, forging, rolling, extrusion, drawing of flat strip, round bar, and tube, deep drawing, and high-energy rate forming. The book comprises an exhaustive description of mechanical properties evaluated by testing of metals and metal working in sufficient depth and with reasonably wide coverage. The book is written in an easy-to-understand manner and includes many solved problems. More than 150 numerical problems and many multiple choice questions as exercise along with their answers have also been provided. The mathematical analyses are well elaborated without skipping any intermediate steps. Slab method of analysis or free-body equilibrium approach is used for the analytical treatment of mechanical working processes. For hot working processes, different frictional conditions (sliding, sticking and mixed sticking–sliding) have been considered to estimate the deformation loads. In addition to the slab method of analysis, this book also contains slip-line field theory, its application to the static system, and the steady state motion, Further, this book includes upper-bound theorem, and upper-bound solutions for indentation, compression, extrusion and strip drawing. The book can be used to teach graduate and undergraduate courses offered to students of mechanical, aerospace, production, manufacturing and metallurgical engineering disciplines. The book can also be used for metallurgists and practicing engineers in industry and development courses in the metallurgy and metallic manufacturing industries.
Download or read book Ductile Fracture and Ductility written by Bradley Dodd and published by Academic Press. This book was released on 1987 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Forming written by William F. Hosford and published by Cambridge University Press. This book was released on 2011-02-07 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book helps the engineer understand the principles of metal forming and analyze forming problems - both the mechanics of forming processes and how the properties of metals interact with the processes. In this fourth edition, an entire chapter has been devoted to forming limit diagrams and various aspects of stamping and another on other sheet forming operations. Sheet testing is covered in a separate chapter. Coverage of sheet metal properties has been expanded. Interesting end-of-chapter notes have been added throughout, as well as references. More than 200 end-of-chapter problems are also included.
Download or read book Four Aspects of Sheet Metal Formability and Their Assessment written by PK. Lee and published by . This book was released on 1973 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: An attempt is made to define formability quantitatively. Owing to the complexity of the concept of formability, it is analysed and four aspects of formability are distinguished. They are: the formability of the material at a critical section, the formability of the material in general, process efficiency, and proportional increase in surface area. Distinction is thus made between formability (or ductility) of the material and the extent to which the ductility is exploited in particular processes. A method of quantitative assessment is proposed for each of the four aspects of formability and demonstrated with experimental results.
Download or read book Metal Forming written by William F. Hosford and published by Prentice Hall. This book was released on 1983 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt:
