Download or read book Droplet Interactions and Spray Processes written by Grazia Lamanna and published by Springer Nature. This book was released on 2020-03-14 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a selection of contributions to the DIPSI workshop 2019 (Droplet Impact Phenomena & Spray Investigations) as well as recent progress of the Int. Research Training Group “DROPIT”.The DIPSI workshop, which is now at its thirteenth edition, represents an important opportunity to share recent knowledge on droplets and sprays in a variety of research fields and industrial applications. The research training group “DROPIT” is focused on droplet interaction technologies where microscopic effects influence strongly macroscopic behavior. This requires the inclusion of interface kinetics and/or a detailed analysis of surface microstructures. Normally, complicated technical processes cover the underlying basic mechanisms, and therefore, progress in the overall process modelling can hardly be gained. Therefore, DROPIT focuses on the underlying basic processes. This is done by investigating different spatial and/or temporal scales of the problems and by linking them through a multi-scale approach. In addition, multi-physics are required to understand e.g. problems for droplet-wall interactions, where porous structures are involved.

Download or read book Droplets and Sprays written by Sergei Sazhin and published by Springer. This book was released on 2014-05-19 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a clear and systematic description of droplets and spray dynamic models, this book maximises reader insight into the underlying physics of the processes involved, outlines the development of new physical and mathematical models and broadens understanding of interactions between the complex physical processes which take place in sprays. Complementing approaches based on the direct application of computational fluid dynamics (CFD), Droplets and Sprays treats both theoretical and practical aspects of internal combustion engine process such as the direct injection of liquid fuel, subcritical heating and evaporation. Including case studies that illustrate the approaches relevance to automotive applications, it is also anticipated that the described models can find use in other areas such as in medicine and environmental science.

Download or read book Dynamics of Droplets written by Arnold Frohn and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book deals with the dynamical behaviour of single droplets and regular droplet systems. It has been written mainly for experimental researchers. After a short description of the theoretical background, the different experimental facilities and methods necessary for the investigation of single droplets are described in detail. A summary of important applications is included.

Download or read book Droplets and Sprays Simple Models of Complex Processes written by Sergei S. Sazhin and published by Springer Nature. This book was released on 2022-06-28 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book acts as a guide to simple models that describe some of the complex fluid dynamics, heat/mass transfer and combustion processes in droplets and sprays. Attention is focused mainly on the use of classical hydrodynamics, and a combination of kinetic and hydrodynamic models, to analyse the heating and evaporation of mono- and multi-component droplets. The models were developed for cases when small and large numbers of components are present in droplets. Some of these models are used for the prediction of time to puffing/micro-explosion of composite water/fuel droplets — processes that are widely used in combustion devices to stimulate disintegration of relatively large droplets into smaller ones. The predictions of numerical codes based on these models are validated against experimental results where possible. In most of the models, droplets are assumed to be spherical; some preliminary results of the generalisation of these models to the case of non-spherical droplets, approximating them as spheroids, are presented.

Download or read book Fluid Dynamics and Transport of Droplets and Sprays written by W. A. Sirignano and published by Cambridge University Press. This book was released on 2010-01-11 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the theoretical foundations of spray and droplet applications relevant to the technology for active control of sprays applied to new products and applications, improved product performance, cost reductions, and improved environmental outcomes. It also covers theory related to power and propulsion; materials processing and manufacturing technologies including droplet-based net form processing, coating, and painting; medication; pesticides and insecticides; and other consumer uses.

Download or read book Process Spray written by Udo Fritsching and published by Springer. This book was released on 2016-08-01 with total page 1030 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the latest research on producing functional particles using spray processes. The authors detail micro level elementary processes and phase boundaries, process analysis scaling and modeling, and macro level process functions and particle properties. They include numerical simulations and particulars of experiments for deriving process conditions for particle production.

Download or read book Drop Surface Interactions written by Martin Rein and published by Springer. This book was released on 2014-05-04 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive overview of fluid mechanical, thermal and physico-chemical aspects of drop-surface interactions. Basic physical mechanisms pertaining to free-surface flow phenomena characteristic of drop impact on solid and liquid surfaces are explained emphasizing the importance of scaling. Moreover, physico-chemical fundamentals relating to a forced spreading of complex solutions, analytical tools for calculating compressibility effects, and heat transfer and phase change phenomena occurring during solidification and evaporation processes, respectively, are introduced in detail. Finally, numerical approaches particularly suited for modeling drop-surface interactions are consisely surveyed with a particular emphasis on boundary integral methods and Navier-Stokes algorithms (volume of fluid, level set and front tracking algorithms). The book is closed by contributions to a workshop on Drop-Surface Interactions held at the International Centre of Mechanical Sciences.

Download or read book Fluid Dynamics and Transport of Droplets and Sprays written by W. A. Sirignano and published by Cambridge University Press. This book was released on 1999-07-28 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative review of the science and technology of droplets and sprays.

Download or read book Droplet and Spray Transport Paradigms and Applications written by Saptarshi Basu and published by Springer. This book was released on 2017-12-12 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on droplets and sprays and their applications. It discusses how droplet level transport is central to a multitude of applications and how droplet level manipulation and control can enhance the efficiency and design of multiphase systems. Droplets and sprays are ubiquitous in a variety of multiphase and multiscale applications in surface patterning, oil recovery, combustion, atomization, spray drying, thermal barrier coating, renewable energy, and electronic cooling, to name but a few. This book provides two levels of details pertaining to such applications. Each chapter delves into a specific application and provides not only an overview but also detailed physical insights into the application mechanism from the point of view of droplets and sprays. All chapters provide a mix of cutting-edge applications, new diagnostic techniques and modern computational methodologies, as well as the fundamental physical mechanism involved in each application. Taken together, the chapters provide a translational perspective on these applications, from basic transport processes to optimization, and from design to implementation using droplets or sprays as fundamental building blocks. Given its breadth of coverage, the book will be of interest to students, researchers, and industry professionals alike.

Download or read book Science and Engineering of Droplets written by Huimin Liu and published by William Andrew. This book was released on 1999-12-31 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to encompass the fundamental phenomenon, principles, and processes of discrete droplets of both normal liquids and melts. It provides the reader with the science and engineering of discrete droplets, and provides researchers, scientists and engineers with the latest developments in the field. The book begins with a systematic review of various processes and techniques, along with their applications and associations with materials systems. This is followed by a description of the phenomena and principles in droplet processes. Correlations, calculations, and numerical modeling of the droplet processes provide insight into the effects of process parameters on droplet properties for optimization of atomizer design. Droplets are found in the areas of metallurgy, materials, automotive, aerospace, medicine, food processing, agriculture, and power generation, and encountered in a huge range of engineering applications.

Download or read book Advanced Materials Proceedings of the Indo Malaysian Joint Workshop WAM 2002 written by and published by Allied Publishers. This book was released on 2003 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thermal Spray 2004 written by and published by ASM International. This book was released on 2004-01-01 with total page 1147 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thermo and Fluid dynamic Processes in Diesel Engines written by James H.W. Whitelaw and published by Springer Science & Business Media. This book was released on 2002-01-11 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes versions of papers selected from those presented at the THIESEL 2000 Conference on Thermofluidynamic Processes in Diesel Engines, held at the Universidad Politecnica de Valencia, during the period of September th th 13 to 15 , 2000. The papers are grouped into seven thematic areas: State of the Art and Prospective, Fuels for Diesel Engines, Injection System and Spray Formation, Combustion and Pollutant Formation, Modelling, Experimental Techniques, and Air Management. These areas cover most of the technologies and research strategies that may allow Light Duty and Heavy Duty Diesel engines to comply with current and forthcoming emission standards, while maintaining or improving fuel consumption. The main objectives of the conference were to bring together ideas and experience from Industry and Universities to facilitate interchange of information and to promote discussion of future research and development needs. The technical papers emphasised the use diagnostic and simulation techniques and their relationship to engineering practice and the advancement of the Diesel engine. We hope that this approach, which proved to be successful at the Conference, is reflected in this volume. We thank all those who contributed to the success of the Conference, and particularly the members of the Advisory Committee who assessed abstracts and chaired many of the technical sessions. Weare also grateful to participants who presented their work or contributed to the many discussions. Finally, the Conference benefitted from financial support from the organisations listed below and we are glad to have this opportunity to record our gratitude.

Download or read book Thermal Spray 2001 written by Christopher C. Berndt and published by ASM International. This book was released on 2001-01-01 with total page 1338 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Transport Phenomena in Materials Processing written by and published by Academic Press. This book was released on 1996-06-25 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials processing and manufacturing are fields of growing importance whereby transport phenomena play a central role in many of the applications. This volume is one of the first collections of contributions on thesubject. The five papers cover a wide variety of applications

Download or read book Handbook of Food Processing written by Theodoros Varzakas and published by CRC Press. This book was released on 2015-10-22 with total page 729 pages. Available in PDF, EPUB and Kindle. Book excerpt: Packed with case studies and problem calculations, Handbook of Food Processing: Food Preservation presents the information necessary to design food processing operations and goes on to describe the equipment needed to carry them out in detail. The book covers every step in the sequence of converting raw material to the final product. It also discus

Download or read book Handbook of Food Processing Two Volume Set written by Theodoros Varzakas and published by CRC Press. This book was released on 2015-11-04 with total page 1420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by world experts, the Handbook of Food Processing, Two-Volume Set discusses the basic principles and applications of major commercial food processing technologies. The handbook discusses food preservation processes, including blanching, pasteurization, chilling, freezing, aseptic packaging, and non-thermal food processing. It describes com