Download or read book Engineering a Safer World written by Nancy G. Leveson and published by MIT Press. This book was released on 2012-01-13 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new approach to safety, based on systems thinking, that is more effective, less costly, and easier to use than current techniques. Engineering has experienced a technological revolution, but the basic engineering techniques applied in safety and reliability engineering, created in a simpler, analog world, have changed very little over the years. In this groundbreaking book, Nancy Leveson proposes a new approach to safety—more suited to today's complex, sociotechnical, software-intensive world—based on modern systems thinking and systems theory. Revisiting and updating ideas pioneered by 1950s aerospace engineers in their System Safety concept, and testing her new model extensively on real-world examples, Leveson has created a new approach to safety that is more effective, less expensive, and easier to use than current techniques. Arguing that traditional models of causality are inadequate, Leveson presents a new, extended model of causation (Systems-Theoretic Accident Model and Processes, or STAMP), then shows how the new model can be used to create techniques for system safety engineering, including accident analysis, hazard analysis, system design, safety in operations, and management of safety-critical systems. She applies the new techniques to real-world events including the friendly-fire loss of a U.S. Blackhawk helicopter in the first Gulf War; the Vioxx recall; the U.S. Navy SUBSAFE program; and the bacterial contamination of a public water supply in a Canadian town. Leveson's approach is relevant even beyond safety engineering, offering techniques for “reengineering” any large sociotechnical system to improve safety and manage risk.

Download or read book Urban Transportation Networks written by Yosef Sheffi and published by Prentice Hall. This book was released on 1984 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Geomechanics from Micro to Macro written by Kenichi Soga and published by CRC Press. This book was released on 2014-08-26 with total page 1668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geomechanics from Micro to Macro contains 268 papers presented at the International Symposium on Geomechanics from Micro and Macro (IS-Cambridge, UK, 1-3 September 2014). The symposium created a forum for the dissemination of new advances in the micro-macro relations of geomaterial behaviour and its modelling. The papers on experimental investigati

Download or read book Safety I and Safety II written by Erik Hollnagel and published by CRC Press. This book was released on 2018-04-17 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety has traditionally been defined as a condition where the number of adverse outcomes was as low as possible (Safety-I). From a Safety-I perspective, the purpose of safety management is to make sure that the number of accidents and incidents is kept as low as possible, or as low as is reasonably practicable. This means that safety management must start from the manifestations of the absence of safety and that - paradoxically - safety is measured by counting the number of cases where it fails rather than by the number of cases where it succeeds. This unavoidably leads to a reactive approach based on responding to what goes wrong or what is identified as a risk - as something that could go wrong. Focusing on what goes right, rather than on what goes wrong, changes the definition of safety from ’avoiding that something goes wrong’ to ’ensuring that everything goes right’. More precisely, Safety-II is the ability to succeed under varying conditions, so that the number of intended and acceptable outcomes is as high as possible. From a Safety-II perspective, the purpose of safety management is to ensure that as much as possible goes right, in the sense that everyday work achieves its objectives. This means that safety is managed by what it achieves (successes, things that go right), and that likewise it is measured by counting the number of cases where things go right. In order to do this, safety management cannot only be reactive, it must also be proactive. But it must be proactive with regard to how actions succeed, to everyday acceptable performance, rather than with regard to how they can fail, as traditional risk analysis does. This book analyses and explains the principles behind both approaches and uses this to consider the past and future of safety management practices. The analysis makes use of common examples and cases from domains such as aviation, nuclear power production, process management and health care. The final chapters explain the theoret

Download or read book Productivity in Construction written by S. P. Dozzi and published by . This book was released on 1993 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Intelligent Computing in Engineering and Architecture written by Ian F.C. Smith and published by Springer Science & Business Media. This book was released on 2006-10-02 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed proceedings of the 13th Workshop of the European Group for Intelligent Computing in Engineering and Architecture, EG-ICE 2006, held in Ascona, Switzerland in June 2006. The 59 revised full papers were carefully reviewed and selected from numerous submissions for inclusion in the book. All issues of advanced informatics are covered including a range of techniques.

Download or read book Federal Statistics Multiple Data Sources and Privacy Protection written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2018-01-27 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: The environment for obtaining information and providing statistical data for policy makers and the public has changed significantly in the past decade, raising questions about the fundamental survey paradigm that underlies federal statistics. New data sources provide opportunities to develop a new paradigm that can improve timeliness, geographic or subpopulation detail, and statistical efficiency. It also has the potential to reduce the costs of producing federal statistics. The panel's first report described federal statistical agencies' current paradigm, which relies heavily on sample surveys for producing national statistics, and challenges agencies are facing; the legal frameworks and mechanisms for protecting the privacy and confidentiality of statistical data and for providing researchers access to data, and challenges to those frameworks and mechanisms; and statistical agencies access to alternative sources of data. The panel recommended a new approach for federal statistical programs that would combine diverse data sources from government and private sector sources and the creation of a new entity that would provide the foundational elements needed for this new approach, including legal authority to access data and protect privacy. This second of the panel's two reports builds on the analysis, conclusions, and recommendations in the first one. This report assesses alternative methods for implementing a new approach that would combine diverse data sources from government and private sector sources, including describing statistical models for combining data from multiple sources; examining statistical and computer science approaches that foster privacy protections; evaluating frameworks for assessing the quality and utility of alternative data sources; and various models for implementing the recommended new entity. Together, the two reports offer ideas and recommendations to help federal statistical agencies examine and evaluate data from alternative sources and then combine them as appropriate to provide the country with more timely, actionable, and useful information for policy makers, businesses, and individuals.

Download or read book The Social Construction of Technological Systems written by Wiebe E. Bijker and published by MIT Press. This book was released on 1989 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The impact of technology on society is clear and unmistakeable. The influence of society on technology is more subtle. The 13 essays in this book have been written by a diverse group of scholars united by a common interest in creating a new field - the sociology of technology. They draw on a wide array of case studies - from cooking stoves to missile systems, from 15th-century Portugal to today's Al labs - to outline an original research program based on a synthesis of ideas from the social studies of science and the history of technology. Together they affirm the need for a study of technology that gives equal weight to technical, social, economic, and political questions"--Back cover.

Download or read book The Sources of Innovation written by Eric von Hippel and published by Oxford University Press, USA. This book was released on 1988 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has long been assumed that new product innovations are typically developed by product manufacturers, an assumption that has inevitably had a major impact on innovation-related research and activities ranging from how firms organize their research and development to how governments measure innovation. In this synthesis of his seminal research, von Hippel challenges that basic assumption and demonstrates that innovation occurs in different places in different industries. Presenting a series of studies showing that end-users, material suppliers, and others are the typical sources of innovation in some fields, von Hippel explores why this variation in the "functional" sources of innovation occurs and how it might be predicted. He also proposes and tests some implications of replacing a manufacturer-as-innovator assumption with a view of the innovation process as predictably distributed across users, manufacturers, and suppliers. Innovation, he argues, will take place where there is greatest economic benefit to the innovator.

Download or read book Advanced Calculus Revised Edition written by Lynn Harold Loomis and published by World Scientific Publishing Company. This book was released on 2014-02-26 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authorised reissue of the long out of print classic textbook, Advanced Calculus by the late Dr Lynn Loomis and Dr Shlomo Sternberg both of Harvard University has been a revered but hard to find textbook for the advanced calculus course for decades.This book is based on an honors course in advanced calculus that the authors gave in the 1960's. The foundational material, presented in the unstarred sections of Chapters 1 through 11, was normally covered, but different applications of this basic material were stressed from year to year, and the book therefore contains more material than was covered in any one year. It can accordingly be used (with omissions) as a text for a year's course in advanced calculus, or as a text for a three-semester introduction to analysis.The prerequisites are a good grounding in the calculus of one variable from a mathematically rigorous point of view, together with some acquaintance with linear algebra. The reader should be familiar with limit and continuity type arguments and have a certain amount of mathematical sophistication. As possible introductory texts, we mention Differential and Integral Calculus by R Courant, Calculus by T Apostol, Calculus by M Spivak, and Pure Mathematics by G Hardy. The reader should also have some experience with partial derivatives.In overall plan the book divides roughly into a first half which develops the calculus (principally the differential calculus) in the setting of normed vector spaces, and a second half which deals with the calculus of differentiable manifolds.

Download or read book Contesting The Future Of Nuclear Power A Critical Global Assessment Of Atomic Energy written by Benjamin K Sovacool and published by World Scientific Publishing Company. This book was released on 2011-05-05 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a concise but rigorous appraisal about the future of nuclear power and the presumed nuclear renaissance. It does so by assessing the technical, economic, environmental, political, and social risks related to all aspects of the nuclear fuel cycle, from uranium mills and mines to nuclear reactors and spent fuel storage facilities. In each case, the book argues that the costs of nuclear power significantly outweigh its benefits. It concludes by calling for investments in renewable energy and energy efficiency as a better path towards an affordable, secure, and socially acceptable future.The prospect of a global nuclear renaissance could change the way that energy is produced and used the world over. Sovacool takes a hard look at who would benefit — mostly energy companies and manufacturers — and who would suffer — mostly taxpayers, those living near nuclear facilities, and electricity customers. This book is a must-read for anyone even remotely concerned about a sustainable energy future, and also for those with a specific interest in modern nuclear power plants.

Download or read book Basic Guide to System Safety written by Jeffrey W. Vincoli and published by John Wiley & Sons. This book was released on 2006-03-31 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a nuts-and-bolts understanding of current system safety practices Basic Guide to System Safety is an ideal primer for practicing occupational safety and health professionals and industrial safety engineers needing a quick introductionto system safety principles. Designed to familiarize the reader with the applicationof scientific and engineering principles for the timely identification of hazards, thisbook efficiently outlines the essentials of system safety and its impact on day-to-dayoccupational safety and health. Divided into two main parts - The System Safety Program and System Safety Analysis: Techniques and Methods - this easy-to-understand book covers: System safety concepts System safety program requirements Probability theory and statistical analysis Preliminary hazard analysis Failure mode and effect analysis Hazard and Operability Studies (HAZOP) and what-if analyses The Second Edition reflects current industry practices with a new chapter on the basic concepts, utility, and function of HAZOP and what-if analyses, two analytical techniques that have been routinely and successfully used in the petrochemical industry for decades. In addition, expanded coverage on the use of the job safety analysis (JSA) adds practical examples emphasizing its value and understanding.

Download or read book Engineering Philosophy written by Louis L. Bucciarelli and published by Delft University Press. This book was released on 2003 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering and Philosophy seem two worlds apart. But things and ideas are not disjunct in this world, and their synthesis is certainly essential in engineering design. In this book, the author explores how the concerns of philosophers are relevant to engineering thought and practice -in negotiating tradeoffs, in diagnosing failure, in constructing adequate models and simulations, and in teaching. This book is based on a number of lectures given at the Technical University of Delft, where the author was a Visiting Professor hosted by the Philosophy section and the School of Industrial Engineering Design. Louis Bucciarelli is a Professor of Engineering and Technology Studies at MIT. He is the author of numerous publications including the book Designing Engineers. Contents include: Designing, like language, is a social process, What engineers don't know & why they believe it, Knowing that and how, Learning engineering, Extrapolation, Index.

Download or read book The Sciences of the Artificial reissue of the third edition with a new introduction by John Laird written by Herbert A. Simon and published by MIT Press. This book was released on 2019-08-13 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Herbert Simon's classic work on artificial intelligence in the expanded and updated third edition from 1996, with a new introduction by John E. Laird. Herbert Simon's classic and influential The Sciences of the Artificial declares definitively that there can be a science not only of natural phenomena but also of what is artificial. Exploring the commonalities of artificial systems, including economic systems, the business firm, artificial intelligence, complex engineering projects, and social plans, Simon argues that designed systems are a valid field of study, and he proposes a science of design. For this third edition, originally published in 1996, Simon added new material that takes into account advances in cognitive psychology and the science of design while confirming and extending the book's basic thesis: that a physical symbol system has the necessary and sufficient means for intelligent action. Simon won the Nobel Prize for Economics in 1978 for his research into the decision-making process within economic organizations and the Turing Award (considered by some the computer science equivalent to the Nobel) with Allen Newell in 1975 for contributions to artificial intelligence, the psychology of human cognition, and list processing. The Sciences of the Artificial distills the essence of Simon's thought accessibly and coherently. This reissue of the third edition makes a pioneering work available to a new audience.

Download or read book Environmental Law Policy and Economics written by Nicholas Askounes Ashford and published by MIT Press. This book was released on 2008 with total page 1125 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past twenty-five years have seen a significant evolution in environmental policy, with new environmental legislation and substantive amendments to earlier laws, significant advances in environmental science, and changes in the treatment of science (and scientific uncertainty) by the courts. This book offers a detailed discussion of the important issues in environmental law, policy, and economics, tracing their development over the past few decades through an examination of environmental law cases and commentaries by leading scholars. The authors focus on pollution, addressing both pollution control and prevention, but also emphasize the evaluation, design, and use of the law to stimulate technical change and industrial transformation, arguing that there is a need to address broader issues of sustainable development. Environmental Law, Policy, and Economics,which grew out of courses taught by the authors at MIT, treats the traditional topics covered in most classes in environmental law and policy, including common law and administrative law concepts and the primary federal legislation. But it goes beyond these to address topics not often found in a single volume: the information-based obligations of industry, enforcement of environmental law, market-based and voluntary alternatives to traditional regulation, risk assessment, environmental economics, and technological innovation and diffusion. Countering arguments found in other texts that government should play a reduced role in environmental protection, this book argues that clear, stringent legal requirements--coupled with flexible means for meeting them--and meaningful stakeholder participation are necessary for bringing about environmental improvements and technologicial transformations.

Download or read book Calculus written by Gilbert Strang and published by . This book was released on 2016-03-07 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Published by OpenStax College, Calculus is designed for the typical two- or three-semester general calculus course, incorporating innovative features to enhance student learning. The book guides students through the core concepts of calculus and helps them understand how those concepts apply to their lives and the world around them. Due to the comprehensive nature of the material, we are offering the book in three volumes for flexibility and efficiency. Volume 2 covers integration, differential equations, sequences and series, and parametric equations and polar coordinates."--BC Campus website.

Download or read book Position Navigation and Timing Technologies in the 21st Century Volumes 1 and 2 written by Y. Jade Morton and published by John Wiley & Sons. This book was released on 2020-12-17 with total page 2064 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the latest developments in PNT technologies, including integrated satellite navigation, sensor systems, and civil applications Featuring sixty-four chapters that are divided into six parts, this two-volume work provides comprehensive coverage of the state-of-the-art in satellite-based position, navigation, and timing (PNT) technologies and civilian applications. It also examines alternative navigation technologies based on other signals-of-opportunity and sensors and offers a comprehensive treatment on integrated PNT systems for consumer and commercial applications. Volume 1 of Position, Navigation, and Timing Technologies in the 21st Century: Integrated Satellite Navigation, Sensor Systems, and Civil Applications contains three parts and focuses on the satellite navigation systems, technologies, and engineering and scientific applications. It starts with a historical perspective of GPS development and other related PNT development. Current global and regional navigation satellite systems (GNSS and RNSS), their inter-operability, signal quality monitoring, satellite orbit and time synchronization, and ground- and satellite-based augmentation systems are examined. Recent progresses in satellite navigation receiver technologies and challenges for operations in multipath-rich urban environment, in handling spoofing and interference, and in ensuring PNT integrity are addressed. A section on satellite navigation for engineering and scientific applications finishes off the volume. Volume 2 of Position, Navigation, and Timing Technologies in the 21st Century: Integrated Satellite Navigation, Sensor Systems, and Civil Applications consists of three parts and addresses PNT using alternative signals and sensors and integrated PNT technologies for consumer and commercial applications. It looks at PNT using various radio signals-of-opportunity, atomic clock, optical, laser, magnetic field, celestial, MEMS and inertial sensors, as well as the concept of navigation from Low-Earth Orbiting (LEO) satellites. GNSS-INS integration, neuroscience of navigation, and animal navigation are also covered. The volume finishes off with a collection of work on contemporary PNT applications such as survey and mobile mapping, precision agriculture, wearable systems, automated driving, train control, commercial unmanned aircraft systems, aviation, and navigation in the unique Arctic environment. In addition, this text: Serves as a complete reference and handbook for professionals and students interested in the broad range of PNT subjects Includes chapters that focus on the latest developments in GNSS and other navigation sensors, techniques, and applications Illustrates interconnecting relationships between various types of technologies in order to assure more protected, tough, and accurate PNT Position, Navigation, and Timing Technologies in the 21st Century: Integrated Satellite Navigation, Sensor Systems, and Civil Applications will appeal to all industry professionals, researchers, and academics involved with the science, engineering, and applications of position, navigation, and timing technologies. pnt21book.com