Download or read book Advanced District Heating and Cooling DHC Systems written by Robin Wiltshire and published by Woodhead Publishing. This book was released on 2015-08-31 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced District Heating and Cooling (DHC) Systems presents the latest information on the topic, providing valuable information on the distribution of centrally generated heat or cold energy to buildings, usually in the form of space heating, cooling, and hot water. As DHC systems are more efficient and less polluting than individual domestic or commercial heating and cooling systems, the book provides an introduction to DHC, including its potential contribution to reducing carbon dioxide emissions, then reviews thermal energy generation for DHC, including fossil fuel-based technologies, those based on renewables, and surplus heat valorization. Final sections address methods to improve the efficiency of DHC. Gives a comprehensive overview of DHC systems and the technologies and energy resources utilized within these systems Analyzes the various methods used for harnessing energy to apply to DHC systems Ideal resource for those interested in district cooling, teleheating, heat networks, distributed heating, thermal energy, cogeneration, combined heat and power, and CHP Reviews the application of DHC systems in the field, including both the business model side and the planning needed to implement these systems
Download or read book District Heating and Cooling Networks in the European Union written by Antonio Colmenar-Santos and published by Springer. This book was released on 2017-07-18 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book evaluates the potential of the combined use of district heating networks and cogeneration in the European Union (EU). It also proposes measures to remove barriers hindering their widespread implementation, formulates policies for their implementation, and evaluates their economic, energy, and environmental consequences. The book presents a preliminary assessment of the likely cost and the impact of widespread adoption of district heating networks and cogeneration carried out in three cities that represent the variety of climatic conditions in the EU. Based on this assessment, it is estimated that by undertaking the maximum economically feasible implementation across the EU, fuel savings of €95M/year would be achieved, representing energy savings of 6,400 petajoules (PJ), which is around 15% of the total final energy consumption in the EU in 2013 (46,214.5 PJ). Using simple and quick calculations and not specific software, the method used allows the evaluation of the potential benefits of retrofitting existing power plants into cogeneration plants and connecting them to nearby heating networks. In light of increasing energy costs and environmental concerns, the book is of interest to heating engineers, city planners, and policy-makers around the globe.
Download or read book District Heating and Cooling written by Svend Frederiksen and published by . This book was released on 2013 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: In urban areas, moving hot and cold air efficiently is essential. By connecting suitable customer heat and cold demands with available heat and cold sources, resource use can be lower when compared to conventional heat and cold supply, such as boilers and air conditioners. Chapters about the fundamental idea, energy markets, customer demands, load variations, supply, environmental impact, distribution, substations, system functioning, economics, planning, historical development, current and future use, organization, and information sources concerning the flows of heat and cold in district heating and cooling systems are included.
Download or read book District Cooling Guide written by and published by Ashrae. This book was released on 2013 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: The District Cooling Guide provides design guidance for all major aspects of district cooling systems, including central chiller plants, chilled-water distribution systems, and consumer interconnection. It draws on the expertise of an extremely diverse international team with current involvement in the industry and hundreds of years of combined experience.
Download or read book A Handbook on Low Energy Buildings and District Energy Systems written by L.D. Danny Harvey and published by Routledge. This book was released on 2012-08-21 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner of Choice Magazine - Outstanding Academic Titles for 2007 Buildings account for over one third of global energy use and associated greenhouse gas emissions worldwide. Reducing energy use by buildings is therefore an essential part of any strategy to reduce greenhouse gas emissions, and thereby lessen the likelihood of potentially catastrophic climate change. Bringing together a wealth of hard-to-obtain information on energy use and energy efficiency in buildings at a level which can be easily digested and applied, Danny Harvey offers a comprehensive, objective and critical sourcebook on low-energy buildings. Topics covered include: thermal envelopes, heating, cooling, heat pumps, HVAC systems, hot water, lighting, solar energy, appliances and office equipment, embodied energy, buildings as systems and community-integrated energy systems (cogeneration, district heating, and district cooling). The book includes exemplary buildings and techniques from North America, Europe and Asia, and combines a broad, holistic perspective with technical detail in an accessible and insightful manner.
Download or read book District Heating Guide written by American Society of Heating, Refrigerating and Air-Conditioning Engineers and published by Ashrae. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Guidance for district heating system planning, design, operation, and maintenance for inexperienced designers and complete reference for those immersed in district heating industry; includes terminology for district heating"--
Download or read book District Cooling written by Alaa A. Olama and published by CRC Press. This book was released on 2016-11-03 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: DISTRICT COOLING: THEORY and PRACTICE provides a unique study of an energy cogeneration system, set up to bring chilled water to buildings (offices, apartment houses, and factories) needing cooling for air conditioning and refrigeration. In winter, the source for the cooling can often be sea water, so it is a cheaper resource than using electricity to run compressors for cooling. The related technology of District Heating has been an established engineering practice for many years, but District Cooling is a relatively new technology now being implemented in various parts of the world, including the USA, Arab Emirates and Kuwait, and Saudi Arabia. Existing books in the area are scarce, and do not address many of the crucial issues facing nations with high overall air temperatures, many of which are developing District Cooling plans using sea water. DISTRICT COOLING: THEORY & PRACTICE integrates the theory behind district cooling planning with the practical engineering approaches, so it can serve the policy makers, engineers, and planners whose efforts have to be coordinated and closely managed to make such systems effective and affordable. In times of rising worldwide temperatures, District Cooling is a way to provide needed cooling with energy conservation and sustainability. This book will be the most up-to-date and comprehensive study on the subject, with Case Studies describing real projects in detail.
Download or read book District Heating and Cooling in the United States written by National Research Council and published by National Academies Press. This book was released on 1985-02-01 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Used historically in urban areas but now mainly in institutions, district heating and cooling systemsâ€"efficient centralized energy systems that may use energy sources other than petroleumâ€"have gained renewed interest. This volume is a nontechnical examination of the history and current extent of district heating and cooling systems in the United States, their costs and benefits, technical requirements, market demand for them, and European experience with such systems, with major focus on the problems of financing, regulation, and taxation. Appendixes provide case studies of cities and towns currently using district heating and cooling systems.
Download or read book Integrated Spatial and Energy Planning written by Gernot Stoeglehner and published by Springer. This book was released on 2016-04-02 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on spatial planning – an important determinant of energy saving and renewable energy supply. Revealing the key driving forces for spatial development supporting the shift towards energy efficiency and renewable energy supplies, it shows the importance of integrated spatial and energy planning approaches for a timely and sustainable change of energy systems, thus supporting policies of climate protection. As operating within the context of renewable energy sources is becoming a major policy issue at the international, European and national level, spatial dimensions of renewable energy systems as well as challenges, barriers and opportunities in different spatial contexts become more important. This book analyses not only the fundamental system interrelations between resources, technologies and consumption patterns with respect to energy, but also the links to the spatial context, and provides guidelines for researchers as well as practitioners in this new, emerging field. It presents innovative analytical tools to solve real-world problems and discusses the most important fields of action in integrated spatial and energy planning including planning contents, planning visions and principles as well as planning process design and planning methodology.
Download or read book District Heating and Cooling Networks written by Antonio Colmenar Santos and published by MDPI. This book was released on 2020-05-12 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conventional thermal power generating plants reject a large amount of energy every year. If this rejected heat were to be used through district heating networks, given prior energy valorisation, there would be a noticeable decrease in the amount of fossil fuels imported for heating. As a consequence, benefits would be experienced in the form of an increase in energy efficiency, an improvement in energy security, and a minimisation of emitted greenhouse gases. Given that heat demand is not expected to decrease significantly in the medium term, district heating networks show the greatest potential for the development of cogeneration. Due to their cost competitiveness, flexibility in terms of the ability to use renewable energy resources (such as geothermal or solar thermal) and fossil fuels (more specifically the residual heat from combustion), and the fact that, in some cases, losses to a country/region’s energy balance can be easily integrated into district heating networks (which would not be the case in a “fully electric” future), district heating (and cooling) networks and cogeneration could become a key element for a future with greater energy security, while being more sustainable, if appropriate measures were implemented. This book therefore seeks to propose an energy strategy for a number of cities/regions/countries by proposing appropriate measures supported by detailed case studies.
Download or read book Renewable Heating and Cooling written by Gerhard Stryi-Hipp and published by Elsevier. This book was released on 2015-11-20 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renewable Heating and Cooling: Technologies and Applications presents the latest information on the generation of heat for industry and domestic purposes, an area where a significant proportion of total energy is consumed. In Europe, this figure is estimated to be almost 50%, with the majority of heat generated by the consumption of fossil fuels. As there is a pressing need to increase the uptake of renewable heating and cooling (RHC) to reduce greenhouse gas emissions, this book provides a comprehensive and authoritative overview on the topic. Part One introduces key RHC technologies and discusses RHC in the context of global heating and cooling demand, featuring chapters on solar thermal process heat generation, deep geothermal energy, and solar cooling technologies. Part Two explores enabling technologies, special applications, and case studies with detailed coverage of thermal energy storage, hybrid systems, and renewable heating for RHC, along with case studies in China and Sweden. Users will find this book to be an essential resource for lead engineers and engineering consultants working on renewable heating and cooling in engineering companies, as well as academics and R&D professionals in private research institutes who have a particular interest in the subject matter. Includes coverage on biomass, solar thermal, and geothermal renewable heating and cooling technologies Features chapters on solar thermal process heat generation, deep geothermal energy, solar cooling technologies, and special applications Presents case studies with detailed coverage of thermal energy storage, hybrid systems, and renewable heating for RHC Explores enabling technologies and special applications
Download or read book District Energy in Cities written by United Nations Publications and published by UN. This book was released on 2017-03-29 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report identifies modern district energy as the most effective approach for many cities to transition to sustainable heating and cooling, by improving energy efficiency and enabling higher shares of renewables. This publication is one of the first reports to provide concrete policy, finance and technology best-practice recommendations on addressing the heating and cooling sectors in cities through energy efficiency improvements and the integration of renewables, both of which are central to the energy transition. These recommendations have been developed in collaboration with 45 champion cities, all of which use district energy, with 11 of them using it to achieve 100 per cent renewables or carbon-neutral targets.
Download or read book Geothermal Energy written by Marc A. Rosen and published by John Wiley & Sons. This book was released on 2017-01-30 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensively covers geothermal energy systems that utilize ground energy in conjunction with heat pumps to provide sustainable heating and cooling The book describes geothermal energy systems that utilize ground energy in conjunction with heat pumps and related technologies to provide heating and cooling. Also discussed are methods to model and assess such systems, as well as means to determine potential environmental impacts of geothermal energy systems and their thermal interaction. The book presents the most up-to-date information in the area. It provides material on a range of topics, from thermodynamic concepts to more advanced discussions of the renewability and sustainability of geothermal energy systems. Numerous applications of such systems are also provided. Geothermal Energy: Sustainable Heating and Cooling Using the Ground takes a research orientated approach to provide coverage of the state of the art and emerging trends, and includes numerous illustrative examples and case studies. Theory and analysis are emphasized throughout, with detailed descriptions of models available for vertical and horizontal geothermal heat exchangers. Key features: Explains geothermal energy systems that utilize ground energy in conjunction with heat pumps to provide heating and cooling, as well as related technologies such as thermal energy storage. Describes and discusses methods to model and analyze geothermal energy systems, and to determine their potential environmental impacts and thermal interactions. Covers various applications of geothermal energy systems. Takes a research orientated approach to provide coverage of the state of the art and emerging trends. Includes numerous illustrative examples and case studies. The book is key for researchers and practitioners working in geothermal energy, as well as graduate and advanced undergraduate students in departments of mechanical, civil, chemical, energy, environmental, process and industrial engineering.
Download or read book Low Energy Cooling for Sustainable Buildings written by Ursula Eicker and published by John Wiley & Sons. This book was released on 2009-03-23 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This long-awaited reference guide provides a complete overview of low energy cooling systems for buildings, covering a wide range of existing and emerging sustainable energy technologies in one comprehensive volume. An excellent data source on cooling performance, such as building loads or solar thermal chiller efficiencies, it is essential reading for building services and renewable energy engineers and researchers covering sustainable design. The book is unique in including a large set of experimental results from years of monitoring actual building and energy plants, as well as detailed laboratory and simulation analyses. These demonstrate which systems really work in buildings, what the real costs are and how operation can be optimized – crucial information for planners, builders and architects to gain confidence in applying new technologies in the building sector. Inside you will find valuable insights into: the energy demand of residential and office buildings; facades and summer performance of buildings; passive cooling strategies; geothermal cooling; active thermal cooling technologies, including absorption cooling, desiccant cooling and new developments in low power chillers; sustainable building operation using simulation. Supporting case study material makes this a useful text for senior undergraduate students on renewable and sustainable energy courses. Practical and informative, it is the best up-to-date volume on the important and rapidly growing area of cooling.
Download or read book Geothermal Energy written by Mary H. Dickson and published by Routledge. This book was released on 2013-07-04 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geothermal energy refers to the heat contained within the Earth that generates geological phenomena on a planetary scale. Today, this term is often associated with man's efforts to tap into this vast energy source. Geothermal Energy: utilization and technology is a detailed reference text, describing the various methods and technologies used to exploit the earth's heat. Beginning with an overview of geothermal energy and the state of the art, leading international experts in the field cover the main applications of geothermal energy, including: electricity generation space and district heating space cooling greenhouse heating aquaculture industrial applications The final third of the book focuses upon environmental impact and economic, financial and legal considerations, providing a comprehensive review of these topics. Each chapter is written by a different author, but to a set style, beginning with aims and objectives and ending with references, self-assessment questions and answers. Case studies are included throughout. Whilst written primarily for professionals and students interested in learning more about geothermal energy, the book also offers those new to the field and the general geothermal community an opportunity to understand and review the potential of this exciting alternative energy source. Published with UNESCO
Download or read book District Heating and Cooling written by United States. Congress. House. Committee on Science and Technology. Subcommittee on Energy Development and Applications and published by . This book was released on 1981 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Steam Turbines for Modern Power Plants written by Tadashi Tanuma and published by Woodhead Publishing. This book was released on 2017-02-15 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Steam Turbines for Modern Power Plants provides an authoritative review of steam turbine design optimization, analysis and measurement, the development of steam turbine blades, and other critical components, including turbine retrofitting and steam turbines for renewable power plants. As a very large proportion of the world’s electricity is currently generated in systems driven by steam turbines, (and will most likely remain the case in the future) with steam turbines operating in fossil-fuel, cogeneration, combined cycle, integrated gasification combined cycle, geothermal, solar thermal, and nuclear plants across the world, this book provides a comprehensive assessment of the research and work that has been completed over the past decades. Presents an in-depth review on steam turbine design optimization, analysis, and measurement Written by a range of experts in the area Provides an overview of turbine retrofitting and advanced applications in power generation