Download or read book District Energy System Design written by Christian Inard and published by MDPI. This book was released on 2020-12-29 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The articles presented in this Special Issue cover different aspects of the urban planning process, such as simulation, optimization or decision-making. The authors highlighted the importance of performing an integrated design of the district, considering different sectors, different energy vectors and different operation modes. In order to better integrate renewable and residual energy sources (R²ES), careful design of systems and storage solutions should be performed. Different storage solutions were tested, ranging from large-scale thermal energy storage to vehicle batteries or the thermal mass of buildings. Van der Heijde et al. (2019) proposed a two-layer design optimization algorithm to design a district heating network with solar thermal collectors, seasonal thermal energy storage and excess heat injection. Pajot et al. (2019) also performed an optimization of the sizing and control of energy systems in a district equipped with heat pumps, with thermal energy storage or thermal mass utilization. A hybrid distribution system, coupling the thermal and electrical networks, was proposed by Widl et al. (2019). Arnaudo et al. (2019) used the vehicle-to-grid (V2G) concept to decrease the overloading of the electrical distribution network during heat pump operation. Finally, Kazmi et al. (2019) proposed an integrated decision-making planning approach for a better integration of R²ES in the distribution network. The complexity of urban planning leads to the development of new tools and methodologies. Until now, operation was poorly integrated in the design phase. New urban building energy modeling tools were proposed by the different authors. These tools are either based on co-simulations or integrated solutions to be able to capture the fine dynamics of a district. The difficulty of generating the input data for the models was also discussed. Regarding the methodology, most articles proposed a two-stage optimization procedure to optimize both the operational and design aspects. Mixed-integer linear programming (MILP) and genetic algorithms were often used to find optimal solutions.
Download or read book District Heating and Cooling Networks in the European Union written by Antonio Colmenar-Santos and published by Springer. This book was released on 2017-07-18 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book evaluates the potential of the combined use of district heating networks and cogeneration in the European Union (EU). It also proposes measures to remove barriers hindering their widespread implementation, formulates policies for their implementation, and evaluates their economic, energy, and environmental consequences. The book presents a preliminary assessment of the likely cost and the impact of widespread adoption of district heating networks and cogeneration carried out in three cities that represent the variety of climatic conditions in the EU. Based on this assessment, it is estimated that by undertaking the maximum economically feasible implementation across the EU, fuel savings of €95M/year would be achieved, representing energy savings of 6,400 petajoules (PJ), which is around 15% of the total final energy consumption in the EU in 2013 (46,214.5 PJ). Using simple and quick calculations and not specific software, the method used allows the evaluation of the potential benefits of retrofitting existing power plants into cogeneration plants and connecting them to nearby heating networks. In light of increasing energy costs and environmental concerns, the book is of interest to heating engineers, city planners, and policy-makers around the globe.
Download or read book District Cooling Guide written by and published by Ashrae. This book was released on 2013 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: The District Cooling Guide provides design guidance for all major aspects of district cooling systems, including central chiller plants, chilled-water distribution systems, and consumer interconnection. It draws on the expertise of an extremely diverse international team with current involvement in the industry and hundreds of years of combined experience.
Download or read book District Heating Guide written by American Society of Heating, Refrigerating and Air-Conditioning Engineers and published by Ashrae. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Guidance for district heating system planning, design, operation, and maintenance for inexperienced designers and complete reference for those immersed in district heating industry; includes terminology for district heating"--
Download or read book Optimal Design of Piping Systems for District Heating written by and published by DIANE Publishing. This book was released on with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book District Energy in Cities written by United Nations Publications and published by UN. This book was released on 2017-03-29 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report identifies modern district energy as the most effective approach for many cities to transition to sustainable heating and cooling, by improving energy efficiency and enabling higher shares of renewables. This publication is one of the first reports to provide concrete policy, finance and technology best-practice recommendations on addressing the heating and cooling sectors in cities through energy efficiency improvements and the integration of renewables, both of which are central to the energy transition. These recommendations have been developed in collaboration with 45 champion cities, all of which use district energy, with 11 of them using it to achieve 100 per cent renewables or carbon-neutral targets.
Download or read book A Handbook on Low Energy Buildings and District Energy Systems written by L.D. Danny Harvey and published by Routledge. This book was released on 2012-08-21 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner of Choice Magazine - Outstanding Academic Titles for 2007 Buildings account for over one third of global energy use and associated greenhouse gas emissions worldwide. Reducing energy use by buildings is therefore an essential part of any strategy to reduce greenhouse gas emissions, and thereby lessen the likelihood of potentially catastrophic climate change. Bringing together a wealth of hard-to-obtain information on energy use and energy efficiency in buildings at a level which can be easily digested and applied, Danny Harvey offers a comprehensive, objective and critical sourcebook on low-energy buildings. Topics covered include: thermal envelopes, heating, cooling, heat pumps, HVAC systems, hot water, lighting, solar energy, appliances and office equipment, embodied energy, buildings as systems and community-integrated energy systems (cogeneration, district heating, and district cooling). The book includes exemplary buildings and techniques from North America, Europe and Asia, and combines a broad, holistic perspective with technical detail in an accessible and insightful manner.
Download or read book A Handbook on Low Energy Buildings and District Energy Systems written by L.D. Danny Harvey and published by Routledge. This book was released on 2012-08-21 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner of Choice Magazine - Outstanding Academic Titles for 2007 Buildings account for over one third of global energy use and associated greenhouse gas emissions worldwide. Reducing energy use by buildings is therefore an essential part of any strategy to reduce greenhouse gas emissions, and thereby lessen the likelihood of potentially catastrophic climate change. Bringing together a wealth of hard-to-obtain information on energy use and energy efficiency in buildings at a level which can be easily digested and applied, Danny Harvey offers a comprehensive, objective and critical sourcebook on low-energy buildings. Topics covered include: thermal envelopes, heating, cooling, heat pumps, HVAC systems, hot water, lighting, solar energy, appliances and office equipment, embodied energy, buildings as systems and community-integrated energy systems (cogeneration, district heating, and district cooling). The book includes exemplary buildings and techniques from North America, Europe and Asia, and combines a broad, holistic perspective with technical detail in an accessible and insightful manner.
Download or read book District Heating Handbook written by and published by . This book was released on 1983 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book District Energy System Design written by Christian Inard and published by . This book was released on 2020 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The articles presented in this Special Issue cover different aspects of the urban planning process, such as simulation, optimization or decision-making. The authors highlighted the importance of performing an integrated design of the district, considering different sectors, different energy vectors and different operation modes. In order to better integrate renewable and residual energy sources (R2ES), careful design of systems and storage solutions should be performed. Different storage solutions were tested, ranging from large-scale thermal energy storage to vehicle batteries or the thermal mass of buildings. Van der Heijde et al. (2019) proposed a two-layer design optimization algorithm to design a district heating network with solar thermal collectors, seasonal thermal energy storage and excess heat injection. Pajot et al. (2019) also performed an optimization of the sizing and control of energy systems in a district equipped with heat pumps, with thermal energy storage or thermal mass utilization. A hybrid distribution system, coupling the thermal and electrical networks, was proposed by Widl et al. (2019). Arnaudo et al. (2019) used the vehicle-to-grid (V2G) concept to decrease the overloading of the electrical distribution network during heat pump operation. Finally, Kazmi et al. (2019) proposed an integrated decision-making planning approach for a better integration of R2ES in the distribution network. The complexity of urban planning leads to the development of new tools and methodologies. Until now, operation was poorly integrated in the design phase. New urban building energy modeling tools were proposed by the different authors. These tools are either based on co-simulations or integrated solutions to be able to capture the fine dynamics of a district. The difficulty of generating the input data for the models was also discussed. Regarding the methodology, most articles proposed a two-stage optimization procedure to optimize both the operational and design aspects. Mixed-integer linear programming (MILP) and genetic algorithms were often used to find optimal solutions.
Download or read book District Cooling written by Alaa A. Olama and published by CRC Press. This book was released on 2016-11-03 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: DISTRICT COOLING: THEORY and PRACTICE provides a unique study of an energy cogeneration system, set up to bring chilled water to buildings (offices, apartment houses, and factories) needing cooling for air conditioning and refrigeration. In winter, the source for the cooling can often be sea water, so it is a cheaper resource than using electricity to run compressors for cooling. The related technology of District Heating has been an established engineering practice for many years, but District Cooling is a relatively new technology now being implemented in various parts of the world, including the USA, Arab Emirates and Kuwait, and Saudi Arabia. Existing books in the area are scarce, and do not address many of the crucial issues facing nations with high overall air temperatures, many of which are developing District Cooling plans using sea water. DISTRICT COOLING: THEORY & PRACTICE integrates the theory behind district cooling planning with the practical engineering approaches, so it can serve the policy makers, engineers, and planners whose efforts have to be coordinated and closely managed to make such systems effective and affordable. In times of rising worldwide temperatures, District Cooling is a way to provide needed cooling with energy conservation and sustainability. This book will be the most up-to-date and comprehensive study on the subject, with Case Studies describing real projects in detail.
Download or read book Exergy written by Ibrahim Dincer and published by Newnes. This book was released on 2012-12-31 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exergy, Second Edition deals with exergy and its applications to various energy systems and applications as a potential tool for design, analysis and optimization, and its role in minimizing and/or eliminating environmental impacts and providing sustainable development. In this regard, several key topics ranging from the basics of the thermodynamic concepts to advanced exergy analysis techniques in a wide range of applications are covered as outlined in the contents. Offers comprehensive coverage of exergy and its applications, along with the most up-to-date information in the area with recent developments Connects exergy with three essential areas in terms of energy, environment and sustainable development Provides a number of illustrative examples, practical applications, and case studies Written in an easy-to-follow style, starting from the basics to advanced systems
Download or read book Renewable Energy Systems written by Henrik Lund and published by Academic Press. This book was released on 2014-03-24 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this new edition of Renewable Energy Systems, globally recognized renewable energy researcher and professor, Henrik Lund, sets forth a straightforward, comprehensive methodology for comparing different energy systems’ abilities to integrate fluctuating and intermittent renewable energy sources. The book does this by presenting an energy system analysis methodology. The book provides the results of more than fifteen comprehensive energy system analysis studies, examines the large-scale integration of renewable energy into the present system, and presents concrete design examples derived from a dozen renewable energy systems around the globe. Renewable Energy Systems, Second Edition also undertakes the socio-political realities governing the implementation of renewable energy systems by introducing a theoretical framework approach aimed at understanding how major technological changes, such as renewable energy, can be implemented at both the national and international levels. Provides an introduction to the technical design of renewable energy systems Demonstrates how to analyze the feasibility and efficiency of large-scale systems to help implementers avoid costly trial and error Addresses the socio-political challenge of implementing the shift to renewables Features a dozen extensive case studies from around the globe that provide real-world templates for new installations
Download or read book Innovations and challenges of the energy transition in smart city districts written by Sven Leonhardt, Tobias Nusser, Jürgen Görres, Sven Rosinger, Gerhard Stryi-Hipp, Martin Eckhard and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-11-16 with total page 769 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optimal Design and Retrofit of Energy Efficient Buildings Communities and Urban Centers written by Moncef Krarti and published by Butterworth-Heinemann. This book was released on 2018-03-27 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimal Design and Retrofit of Energy Efficient Buildings, Communities, and Urban Centers presents current techniques and technologies for energy efficiency in buildings. Cases introduce and demonstrate applications in both the design of new buildings and retrofit of existing structures. The book begins with an introduction that includes energy consumption statistics, building energy efficiency codes, and standards and labels from around the world. It then highlights the need for integrated and comprehensive energy analysis approaches. Subsequent sections present an overview of advanced energy efficiency technologies for buildings, including dynamic insulation materials, phase change materials, LED lighting and daylight controls, Life Cycle Analysis, and more. This book provides researchers and professionals with a coherent set of tools and techniques for enhancing energy efficiency in new and existing buildings. The case studies presented help practitioners implement the techniques and technologies in their own projects. Introduces a holistic analysis approach to energy efficiency for buildings using the concept of energy productivity Provides coverage of individual buildings, communities and urban centers Includes both the design of new buildings and retrofitting of existing structures to improve energy efficiency Describes state-of-the-art energy efficiency technologies Presents several cases studies and examples that illustrate the analysis techniques and impact of energy efficiency technologies and controls
Download or read book Geothermal Energy Systems written by Ibrahim Dincer and published by Elsevier. This book was released on 2021-03-25 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geothermal Energy Systems provides design and analysis methodologies by using exergy and enhanced exergy tools (covering exergoenvironmental, exergoeconomic, exergetic life cycle assessment, etc.), environmental impact assessment models, and sustainability models and approaches. In addition to presenting newly developed advanced and integrated systems for multigenerational purposes, the book discusses newly developed environmental impact assessment and sustainability evaluation methods and methodologies. With case studies for integrated geothermal energy sources for multigenerational aims, engineers can design and develop new geothermal integrated systems for various applications and discover the main advantages of design choices, system analysis, assessment and development of advanced geothermal power systems. Explains the ability of geothermal energy power systems to decrease global warming Discusses sustainable development strategies for using geothermal energy sources Provides new design conditions for geothermal energy sources-based district energy systems
Download or read book Role of Mathematical Modeling in Advanced Power Generation Systems written by Arijit Ganguli and published by Frontiers Media SA. This book was released on 2023-11-13 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy demands throughout the globe has been increasing and the detrimental effects of carbon emissions on the environment by use of non-renewable resources has impacted life on the planet. The changing climate has caused an increase in natural calamities all over the globe. Many countries in the world have started to produce power using renewable resources like solar, biomass, wind energy, nuclear energy and green fuels. Though there are several technologies for power generation using the above sources, efficient design of these systems still needs lot of research. Mathematical modeling would play a vital role in design of state of the art technologies. Advanced nuclear power plants need special mention since they involve naturally driven safety systems where the complex phenomena of boiling, condensation and thermal stratification take place. These are difficult to model as there is more than one phase coupled with turbulence models, near wall phenomena, coalescence and break up, etc. Scaling up of such systems and their innovative design to reduce stratification requires the help of mathematical modeling. Other opportunities include Computational Fluid Dynamics (CFD) modeling for design of wind turbines for power generation using wind energy. Power generation from biomass involves use of gasifiers which has complex set of reactions and mostly two or three phases which are difficult to model using CFD at industrial scales.
