Download or read book Displacement based seismic design for multi storey cross laminated timber buildings written by Hummel, Johannes and published by kassel university press GmbH. This book was released on 2017 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Key Terms: cross laminated timber, displacement-based seismic design, time history analysis, multi-storey timber structures, hysteretic behaviour

Download or read book Displacement based Seismic Design of Structures written by M. J. N. Priestley and published by Iuss Press. This book was released on 2007 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Displacement-Based Seismic Design of Structures is a book primarily directed towards practicing structural designers who are interested in applying performance-based concepts to seismic design. Since much of the material presented in the book has not been published elsewhere, it will also be of considerable interest to researchers, and to graduate and upper-level undergraduate students of earthquake engineering who wish to develop a deeper understanding of how design can be used to control seismic response. The design philosophy is based on determination of the optimum structural strength to achieve a given performance limit state, related to a defined level of damage, under a specified level of seismic intensity. Emphasis is also placed on how this strength is distributed through the structure. This takes two forms: methods of structural analysis and capacity design. It is shown that equilibrium considerations frequently lead to a more advantageous distribution of strength than that resulting from stiffness considerations. Capacity design considerations have been re-examined, and new and more realistic design approaches are presented to insure against undesirable modes of inelastic deformation. The book considers a wide range of structural types, including separate chapters on frame buildings, wall buildings, dual wall/frame buildings, masonry buildings, timber structures, bridges, structures with isolation or added damping devices, and wharves. These are preceded by introductory chapters discussing conceptual problems with current force-based design, seismic input for displacement-based design, fundamentals of direct displacement-based design, and analytical tools appropriate for displacement-based design. The final two chapters adapt the principles of displacement-based seismic design to assessment of existing structures, and present the previously developed design information in the form of a draft building code. The text is illustrated by copious worked design examples (39 in all), and analysis aids are provided in the form of a CD containing three computer programs covering moment-curvature analysis (Cumbia), linear-element-based inelastic time-history analysis (Ruaumoko), and a general fibre-element dynamic analysis program (SeismoStruct). The design procedure developed in this book is based on a secant-stiffness (rather than initial stiffness) representation of structural response, using a level of damping equivalent to the combined effects of elastic and hysteretic damping. The approach has been fully verified by extensive inelastic time history analyses, which are extensively reported in the text. The design method is extremely simple to apply, and very successful in providing dependable and predictable seismic response. Authors Bios M.J.N.Priestley Nigel Priestley is Professor Emeritus of the University of California San Diego, and co-Director of the Centre of Research and Graduate Studies in Earthquake Engineering and Engineering Seismology (ROSE School), Istituto Universitario di Studi Superiori (IUSS), Pavia, Italy. He has published more than 450 papers, mainly on earthquake engineering, and received numerous awards for his research. He holds honorary doctorates from ETH, Zurich, and Cujo, Argentina. He is co-author of two previous seismic design books “Seismic Design of Concrete and Masonry Buildings” and “Seismic Design and Retrofit of Bridges”, that are considered standard texts on the subjects. G.M.Calvi Michele Calvi is Professor of the University of Pavia and Director of the Centre of Research and Graduate Studies in Earthquake Engineering and Engineering Seismology (ROSE School), Istituto Universitario di Studi Superiori (IUSS) of Pavia. He has published more than 200 papers and is co-author of the book “Seismic Design and Retrofit of Bridges”, that is considered a standard text on the subject, has been involved in important construction projects worldwide, such as the Rion Bridge in Greece and the upgrading of the Bolu Viaduct in Turkey, and is coordinating several international research projects. M.J.Kowalsky Mervyn Kowalsky is Associate Professor of Structural Engineering in the Department of Civil, Construction, and Environmental Engineering at North Carolina State University and a member of the faculty of the ROSE School. His research, which has largely focused on the seismic behaviour of structures, has been supported by the National Science Foundation, the North Carolina and Alaska Departments of Transportation, and several industrial organizations. He is a registered Professional Engineer in North Carolina and an active member of several national and international committees on Performance-Based Seismic Design.

Download or read book Displacement based Seismic Design of Reinforced Concrete Buildings written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2003 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: A brief summary of the history of seismic design as given in chapter 1, indicates that initially design was purely based on strength or force considerations. When the importance of displacement, however, became better appreciated, it was attempted to modify the existing force-based approach in order to include considerations of displacement, rather than to totally reconsider the procedure on a more rational basis. In the last decade, then, several researchers started pointing out this inconsistency, proposing displacement-based approaches for earthquake engineering evaluation and design, with the aim of providing improved reliability in the engineering process by more directly relating computed response and expected structural performance. The main objective of this report is to summarize, critically review and compare the displacement - based approaches proposed in the literature, thus favouring code implementation and practical use of rational and reliable methods. Chapter 2 Seismic performance and design objectives of this report introduces concepts of performance levels, seismic hazard representation, and the coupling of performance and hazard to define performance objectives. In fact, for displacement analysis to be relevant in the context of performance-based design, the structural engineer must select appropriate performance levels and seismic loadings. A critical review of some engineering limit states appropriate to the different performance levels is therefore proposed. In chapter 3 Conceptual basis for displacement-based earthquake resistant design, the fundamental principles associated with displacement of the ground during an earthquake and the effects, in terms of displacement, in the structure, are reviewed. The historical development guides the presentation with a review of general linear and nonlinear structural dynamics principles, general approaches to estimate displacement, for both ground and structure, and finally a general presentation of the means to measure and judge the appropriateness of the displacements of the structure in section. Chapter 4 Approaches and procedures for displacement-based design can be somehow considered the fundamental part of the report, since a critical summary of the displacement - based approaches proposed by different researchers is presented there. Displacement - based design may require specific characterization of the input ground motion, a topic addressed in Chapter 5 Seismic input. In general, various pertinent definitions of input motion for non-code format analysis are included, while peak ground parameters necessary for code base shear equations are only addressed as needed for the definition of motion for analysis. Chapter 6 Displacement capacity of members and systems addresses the fundamental problem of evaluating the inelastic displacement capacity of reinforced concrete members and realistic values of their effective cracked stiffness at yielding, including effects of shear and inclined cracking, anchorage slip, bar buckling and of load cycling. In Chapter 7 Application and evaluation of displacement-based approaches, some of the many different displacement based design procedures briefly introduced in Chapter 4 are applied to various case studies, identifying and discussing the difficulties a designer may encounter when trying to use displacement based design. Results for five different case studies designed in accordance with eight different displacement based design methods are presented. Although in general case studies are considered a useful but marginal part of a state of the art document, in this case it has to be noted that chapter 7 is possibly the most innovative and fundamental part of the whole report. The conclusions of chapter 7 are the fundamental and essential conclusions of the document and allow foreseeing a bright future for displacement - based design approaches. The state-of-art report has been elaborated over a period of 4 years by Task Group 7.2 Displacement-based design and assessment of fib Commission 7Seismic design, a truly international team of experts, representing the expertise and experience of all the important seismic regions of the world. In October 2002 the final draft of the Bulletin was presented to the public during the 1st fibCongress in Osaka. It was also there that it was approved by fib Commission 7Seismic Design.

Download or read book Displacement based Seismic Design of Timber Structures written by Cristiano Loss and published by . This book was released on 2011 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Potential of Gmelina as new Material for the Design and Construction of Timber Structures written by Stanley Iwuoha and published by BoD – Books on Demand. This book was released on 2022-01-01 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is an extensive and systematic study on the potentials of Gmelina arborea from southwestern Nigeria as a construction material. The fundamental motivation of the study is to investigate whether timber from the large available Gmelina plantations in Nigeria can be used to mediate the need for more housing units currently facing the country due its current growing population, and to introduce the local populance to an alternative construction material that ist both sustainable, and environmentally.

Download or read book Seismic Response of Multi storey Cross laminated Timber Buildings written by Cagatay Demirci and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Timber Structures and Engineering written by De Proft, K. and published by WIT Press. This book was released on 2018-02-06 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains papers presented at the 1st International Conference on Timber Structures, which was held in collaboration with the Technical Centre of Wood Industry in Belgium. It explores the latest developments in wood products and their application as structural components. The focus of the included works is to draw attention to new research and real applications from both researchers and practitioners, and to present new and innovative ideas in this significant field. Rapid advances have recently been made in the development and processing of innovative ecologically friendly wood products. A variation of new structural shapes can now be fabricated and used to construct buildings and bridges which have minimal impact on the environment. Wood is particularly appealing since it is renewable and has no carbon footprint when it is harvested in a sustainable way. Timber structures are ecologically sound and comparatively low cost. The material lends itself to ground-breaking designs and new types of composites offer reliable, robust and safe materials. The content of this book comprises a range of topics: Material properties of wood; Durability aspects, service life modelling; Fire safety of timber structures; Protection against decay; Non-destructive inspection and monitoring; Glued, laminated structures, Xlam and CLT; Timber joints and connections; Vernacular wood and heritage timber structures; Timber housing and eco-architecture; Timber bridges; Large span timber roof structures; Shell structures in timber; Mixed, composite and hybrid structures; Computational analysis and experimental methods; Structural engineering and design; Seismic behaviour of timber structures; Protection of timber; Repaired timber structures; Rapidly assembled and transferable timber structures; Guidelines, codes and regulations; Structural failures; Art and craftsmanship.

Download or read book Structures and Architecture written by Paulo J. Cruz and published by CRC Press. This book was released on 2013-06-27 with total page 2314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the disciplines of architecture and structural engineering have both experienced their own historical development, their interaction has resulted in many fascinating and delightful structures. To take this interaction to a higher level, there is a need to stimulate the inventive and creative design of architectural structures and to persua

Download or read book Performance Based Seismic Design of Cross Laminated Timber Tall Buildings with Inter story Isolation System written by Vahab Bolvardi and published by . This book was released on 2018 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Performance Based Seismic Design of Concrete Structures and Infrastructures written by Plevris, Vagelis and published by IGI Global. This book was released on 2017-02-14 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid design and craftsmanship are a necessity for structures and infrastructures that must stand up to natural disasters on a regular basis. Continuous research developments in the engineering field are imperative for sustaining buildings against the threat of earthquakes and other natural disasters. Performance-Based Seismic Design of Concrete Structures and Infrastructures is an informative reference source on all the latest trends and emerging data associated with structural design. Highlighting key topics such as seismic assessments, shear wall structures, and infrastructure resilience, this is an ideal resource for all academicians, students, professionals, and researchers that are seeking new knowledge on the best methods and techniques for designing solid structural designs.

Download or read book Seismic Design and Testing of Rocking Cross Laminated Timber Walls written by Ryan S. Ganey and published by . This book was released on 2015 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mass timber is an attractive alternative to nonrenewable materials such as concrete and steel. High rise timber buildings have not been built in high seismic areas due to lack of ductile lateral force resisting systems that can have large seismic force reduction factors. Seismically resilient, lateral systems for tall timber buildings can be created by combining cross laminated timber (CLT) panels with post-tensioned (PT) self-centering technology. The concept features a system of stacked CLT walls where particular stories are equipped to rock against the above and below floor diaphragms through PT connections and are supplemented with mild steel U-shaped flexural plate energy dissipation devices (UFPs). Experiments were conducted to better understand rocking CLT wall behavior and seismic performance. The testing program consisted of five single wall tests with varying PT areas, initial tensioning force, CLT panel composition, and rocking surface and one coupled wall test with UFPs as the coupling devices. The walls were tested with a quasi-static reverse-cyclic load protocol. The experimental results showed a ductile response and good energy dissipation qualities. To evaluate the feasibility and performance of the rocking CLT wall system, prototype designs were developed for 8 to 14 story buildings in Seattle using a performance-based seismic design procedure. Performance was assessed using numerical simulations performed in OpenSees for ground motions representing a range of seismic hazards. The results were used to validate the performance-based seismic design procedure for tall timber buildings with rocking CLT walls.

Download or read book Seismic Design of RC Buildings written by Sharad Manohar and published by Springer. This book was released on 2015-09-09 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to serve as a textbook for engineering courses on earthquake resistant design. The book covers important attributes for seismic design such as material properties, damping, ductility, stiffness and strength. The subject coverage commences with simple concepts and proceeds right up to nonlinear analysis and push-over method for checking building adequacy. The book also provides an insight into the design of base isolators highlighting their merits and demerits. Apart from the theoretical approach to design of multi-storey buildings, the book highlights the care required in practical design and construction of various building components. It covers modal analysis in depth including the important missing mass method of analysis and tension shift in shear walls and beams. These have important bearing on reinforcement detailing. Detailed design and construction features are covered for earthquake resistant design of reinforced concrete as well as confined and reinforced masonry structures. The book also provides the methodology for assessment of seismic forces on basement walls and pile foundations. It provides a practical approach to design and detailing of soft storeys, short columns, vulnerable staircases and many other components. The book bridges the gap between design and construction. Plenty of worked illustrative examples are provided to aid learning. This book will be of value to upper undergraduate and graduate students taking courses on seismic design of structures.

Download or read book 100 Projects UK CLT written by Waugh Thistleton Architects and published by . This book was released on 2018 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The benefits of cross-laminated timber (CLT) are clear: building in timber is quick, clean, and easy. It can be achieved with a measured accuracy and lack of noise, waste, or need for material storage space. This book is a study of the 100 of the most significant buildings constructed from CLT in the United Kingdom over the past 15 years. Authors Andrew Waugh and Anthony Thistleton of Waugh Thistleton Architects have contacted a wide range of individuals and businesses to interview them about their experiences building in CLT to help inform this book." -- Thinkwood.com.

Download or read book Seismic Design Methods for Steel Building Structures written by George A. Papagiannopoulos and published by Springer Nature. This book was released on 2022-01-01 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book, after two introductory chapters on seismic design principles and structural seismic analysis methods, proceeds with the detailed description of seismic design methods for steel building structures. These methods include all the well-known methods, like force-based or displacement-based methods, plus some other methods developed by the present authors or other authors that have reached a level of maturity and are applicable to a large class of steel building structures. For every method, detailed practical examples and supporting references are provided in order to illustrate the methods and demonstrate their merits. As a unique feature, the present book describes not just one, as it is the case with existing books on seismic design of steel structures, but various seismic design methods including application examples worked in detail. The book is a valuable source of information, not only for MS and PhD students, but also for researchers and practicing engineers engaged with the design of steel building structures.

Download or read book Seismic Design of Buildings to Eurocode 8 written by Ahmed Elghazouli and published by CRC Press. This book was released on 2016-12-19 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the seismic design of building structures and their foundations to Eurocode 8. It covers the principles of seismic design in a clear but brief manner and then links these concepts to the provisions of Eurocode 8. It addresses the fundamental concepts related to seismic hazard, ground motion models, basic dynamics, seismic analysis, siting considerations, structural layout, and design philosophies, then leads to the specifics of Eurocode 8. Code procedures are applied with the aid of walk-through design examples which, where possible, deal with a common case study in most chapters. As well as an update throughout, this second edition incorporates three new and topical chapters dedicated to specific seismic design aspects of timber buildings and masonry structures, as well as base-isolation and supplemental damping. There is renewed interest in the use of sustainable timber buildings, and masonry structures still represent a popular choice in many areas. Moreover, seismic isolation and supplemental damping can offer low-damage solutions which are being increasingly considered in practice. The book stems primarily from practical short courses on seismic design which have been run over a number of years and through the development Eurocode 8. The contributors to this book are either specialist academics with significant consulting experience in seismic design, or leading practitioners who are actively engaged in large projects in seismic areas. This experience has provided significant insight into important areas in which guidance is required.

Download or read book Seismic Design Methodologies for the Next Generation of Codes written by P. Fajfar and published by Routledge. This book was released on 2019-09-10 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings, arising from an international workshop, present research results and ideas on issues of importance to seismic risk reduction and the development of future seismic codes.

Download or read book Structures and Architecture written by Paulo J. da Sousa Cruz and published by CRC Press. This book was released on 2016-10-14 with total page 1465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the disciplines of architecture and structural engineering have both experienced their own historical development, their interaction has resulted in many fascinating and delightful structures. To take this interaction to a higher level, there is a need to stimulate the inventive and creative design of architectural structures and to persuade architects and structural engineers to further collaborate in this process, exploiting together new concepts, applications and challenges. This set of book of abstracts and full paper searchable CD-ROM presents selected papers presented at the 3rd International Conference on Structures and Architecture Conference (ICSA2016), organized by the School of Architecture of the University of Minho, Guimarães, Portugal (July 2016), to promote the synergy in the collaboration between the disciplines of architecture and structural engineering. The set addresses all major aspects of structures and architecture, including building envelopes, comprehension of complex forms, computer and experimental methods, concrete and masonry structures, educating architects and structural engineers, emerging technologies, glass structures, innovative architectural and structural design, lightweight and membrane structures, special structures, steel and composite structures, the borderline between architecture and structural engineering, the history of the relationship between architects and structural engineers, the tectonics of architectural solutions, the use of new materials, timber structures and more. The contributions on creative and scientific aspects of the conception and construction of structures, on advanced technologies and on complex architectural and structural applications represent a fine blend of scientific, technical and practical novelties in both fields. This set is intended for both researchers and practitioners, including architects, structural and construction engineers, builders and building consultants, constructors, material suppliers and product manufacturers, and other experts and professionals involved in the design and realization of architectural, structural and infrastructural projects.