Download or read book An Introduction to Composite Materials written by D. Hull and published by Cambridge University Press. This book was released on 1996-08-13 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition has been greatly enlarged and updated to provide both scientists and engineers with a clear and comprehensive understanding of composite materials. In describing both theoretical and practical aspects of their production, properties and usage, the book crosses the borders of many disciplines. Topics covered include: fibres, matrices, laminates and interfaces; elastic deformation, stress and strain, strength, fatigue crack propagation and creep resistance; toughness and thermal properties; fatigue and deterioration under environmental conditions; fabrication and applications. Coverage has been increased to include polymeric, metallic and ceramic matrices and reinforcement in the form of long fibres, short fibres and particles. Designed primarily as a teaching text for final-year undergraduates in materials science and engineering, this book will also interest undergraduates and postgraduates in chemistry, physics, and mechanical engineering. In addition, it will be an excellent source book for academic and technological researchers on materials.
Download or read book Fundamental Aspects of Dislocation Interactions written by G. Kostorz and published by Elsevier. This book was released on 2013-09-03 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental Aspects of Dislocation Interactions: Low-Energy Dislocation Structures III covers the papers presented at a European Research Conference on Plasticity of Materials-Fundamental Aspects of Dislocation Interactions: Low-Energy Dislocation Structures III, held on August 30-September 4, 1992 in Ascona, Switzerland. The book focuses on the processes, technologies, reactions, transformations, and approaches involved in dislocation interactions. The selection first offers information on work softening and Hall-Petch hardening in extruded mechanically alloyed alloys and dynamic origin of dislocation structures in deformed solids. Discussions focus on stress-strain behavior in relation to composition, structure, and annealing; comparison of stress-strain curves with work softening theory; sweeping and trapping mechanism; and model of dipolar wall structure formation. The text then ponders on plastic instabilities and their relation to fracture and dislocation and kink dynamics in f.c.c. metals studied by mechanical spectroscopy. The book takes a look at misfit dislocation generation mechanisms in heterostructures and evolution of dislocation structure on the interfaces associated with diffusionless phase transitions. Discussions focus on dislocation representation of a wall of elastic domains; equation of equilibrium of an elastic domain; transformation of dislocations; and theoretical and experimental background. The selection is a valuable reference for readers interested in dislocation interactions.
Download or read book Dislocations in Solids written by and published by Elsevier. This book was released on 2009-10-13 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bacon and Osetsky present an atomistic model of dislocation-particle interactions in metal systems, including irradiated materials. This work is important in simulating actual behavior, removing earlier reliance on assumed mechanisms for dislocation motion. New mechanisms for dislocation generation under shock loading are presented by Meyers et al. These models provide a basis for understanding the constitutive behavior of shocked material. Saada and Dirras provide a new perspective on the Hall-Petch relation, with particular emphasis on nanocrystals. Of particular significance, deviations from the traditional stress proportional to the square-root of grain size relation are explained. Robertson et al consider a number of effects of hydrogen on plastic flow and provide a model that provides an explanation of the broad range of properties. - Flow stress of metal systems with particle hardening, including radiation effects - New model for dislocation kinetics under shock loading - Explanation of effects of nanoscale grain size on strength - Mechanism of hydrogen embrittlement in metal alloys
Download or read book The Oxford Handbook of Information Structure written by Caroline Féry and published by Oxford University Press. This book was released on 2016 with total page 993 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides linguists with a clear, critical, and comprehensive overview of theoretical and experimental work on information structure. Leading researchers survey the main theories of information structure in syntax, phonology, and semantics as well as perspectives from psycholinguistics and other relevant fields. Following the editors' introduction the book is divided into four parts. The first, on theories of and theoretical perspectives on information structure, includes chapters on topic, prosody, and implicature. Part 2 covers a range of current issues in the field, including focus, quantification, and sign languages, while Part 3 is concerned with experimental approaches to information structure, including processes involved in its acquisition and comprehension. The final part contains a series of linguistic case studies drawn from a wide variety of the world's language families. This volume will be the standard guide to current work in information structure and a major point of departure for future research.
Download or read book Dislocation Structures in Single Crystal Tungsten and Tungsten Alloys written by Joseph R. Stephens and published by . This book was released on 1969 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dislocation Structures in Slightly Strained Tungsten and Tungsten rhenium and Tungsten tantalum Alloys written by Joseph R. Stephens and published by . This book was released on 1967 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dislocation Dynamics and Plasticity written by Taira Suzuki and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the 1950s the direct observation of dislocations became possible, stimulat ing the interest of many research workers in the dynamics of dislocations. This led to major contributions to the understanding of the plasticity of various crys talline materials. During this time the study of metals and alloys of fcc and hcp structures developed remarkably. In particular, the discovery of the so-called in ertial effect caused by the electron and phonon frictional forces greatly influenced the quantitative understanding of the strength of these metallic materials. Statis tical studies of dislocations moving through random arrays of point obstacles played an important role in the above advances. These topics are described in Chaps. 2-4. Metals and alloys with bcc structure have large Peierls forces compared to those with fcc structure. The reasons for the delay in studying substances with bcc structure were mostly difficulties connected with the purification techniques and with microscopic studies of the dislocation core. In the 1970s, these difficulties were largely overcome by developments in experimental techniques and computer physics. Studies of dislocations in ionic and covalent bonding materials with large Peierls forces provided infonnation about the core structures of dislocations and their electronic interactions with charged particles. These are the main subjects in Chaps. 5-7.
Download or read book Dislocated Elements in Discourse written by Benjamin Shaer and published by Routledge. This book was released on 2009-01-13 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is about 'dislocation' – the removal of phrases from their canonical positions in a sentence to its left or right edge. Dislocation encompasses a wide range of linguistic phenomena, related to nominal and adverbial expressions and to the information structuring notions of topic and focus; and takes intriguingly different forms across languages. This book reveals some of the empirical richness of dislocation and some key puzzles related to its syntactic, semantic, and discourse analysis.
Download or read book Dislocation Modelling of Physical Systems written by M.F. Ashby and published by Elsevier. This book was released on 2013-10-22 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dislocation Modelling of Physical Systems contains the Proceedings of the International Conference held at Gainesville, Florida, USA on June 22-27, 1980. The book emphasizes the growing interest in relating dislocation theoretic concepts to engineering problems. Topic areas chosen ranged from the fundamental, such as properties of single dislocations, to the more applied, such as fracture. The papers are grouped specifically based on the main topics they discuss. These topics include fracture; point defects and dislocations; structure dependence of mechanical behavior; properties of single dislocations; plasticity and geometry of deformation; internal friction effects; and boundaries.
Download or read book Dislocation Mechanics of Metal Plasticity and Fracturing written by Ronald W. Armstrong and published by MDPI. This book was released on 2020-11-03 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: The modern understanding of metal plasticity and fracturing began about 100 years ago, with pioneering work; first, on crack-induced fracturing by Griffith and, second, with the invention of dislocation-enhanced crystal plasticity by Taylor, Orowan and Polanyi. The modern counterparts are fracture mechanics, as invented by Irwin, and dislocation mechanics, as initiated in pioneering work by Cottrell. No less important was the breakthrough development of optical characterization of sectioned polycrystalline metal microstructures started by Sorby in the late 19th century and leading eventually to modern optical, x-ray and electron microscopy methods for assessments of crystal fracture surfaces, via fractography, and particularly of x-ray and electron microscopy techniques applied to quantitative characterizations of internal dislocation behaviors. A major current effort is to match computational simulations of metal deformation/fracturing behaviors with experimental measurements made over extended ranges of microstructures and over varying external conditions of stress-state, temperature and loading rate. The relation of such simulations to the development of constitutive equations for a hoped-for predictive description of material deformation/fracturing behaviors is an active topic of research. The present collection of articles provides a broad sampling of research accomplishments on the two subjects.
Download or read book Structure of Crystals written by Boris K. Vainshtein and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Crystallography provides an encyclopedic exposition of the field in four volumes written by Russian scientists. Structures of Crystals considers the ideal and real atomic structure of crystals as well as their electronic structures, the fundamentals of chemical bonding between atoms, geometric representations in the theory of crystal structure and crystal chemistry, as well as lattice energy. The important classes of crystal structures in inorganic compounds as well as structure polymers, liquid crystals, biological crystals, and macromolecules are treated. This second edition is complemented by recent data on many types of crystal structures - fullerenes, high-temperature superconductors, minerals, liquid crystals, etc.
Download or read book Materials Modelling written by English and published by CRC Press. This book was released on 2020-11-26 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Materials Modelling: From Theory to Technology, a distinguished collection of authors has been assembled to celebrate the 60th birthday of Dr. R. Bullough, FRS and honor his contribution to the subject over the past 40 years. The volume explores subjects that have implications in a wide range of technologies, focusing on how basic research can be applied to real problems in science and engineering. Linking theory and technology, the book progresses from the theoretical background to current and future practical applications of modeling. Accessible to a diverse audience, it requires little specialist knowledge beyond a physics degree. The book is useful reading for postgraduates and researchers in condensed matter, nuclear engineering, and physical metallurgy, in addition to workers in R&D laboratories and the high technology industry.
Download or read book Dislocations in Solids written by Frank R.N. Nabarro and published by Elsevier. This book was released on 2002-12-05 with total page 687 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dislocations are lines of irregularity in the structure of a solid analogous to the bumps in a badly laid carpet. Like these bumps, they can be easily moved, and they provide the most important mechanism by which the solid can be deformed. They also have a strong influence on crystal growth and on the electronic properties of semiconductors.
Download or read book Dislocations in Solids written by Hideji Suzuki and published by VSP. This book was released on 1985-12 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises the Proceedings of the Yamada Conference IX on Dislocations in Solids, held in August 1984 in Tokyo. The purpose of the conference was two-fold: firstly to evaluate the increasing data on basic properties of dislocations and their interaction with other types of defects in solids and, secondly, to increase understanding of the material properties brought about by dislocation-related phenomena. Metals and alloys, semi-conductors and ions crystals were discussed. One of the important points of contention was the electronic state at the core of dislocation. Another was the dislocation model of amorphous structure.
Download or read book Mechanics of Generalized Continua written by E. Kröner and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: 5 The symposium was held in Freudenstadt from 28\h to 31 \ ofAugust st nd 1967 and in Stuttgart from 1 to 2 of September 1967. The proposal to hold this symposium originated with the German Society of Applied Mathematics and Mechanics (GAMM) late in 1964 and was examined by a committee of IUTAM especially appointed for this purpose. The basis of this examination was a report in which the present situation in the field and the possible aims of the symposium were surveyed. Briefly, the aims of the symposium were stated to be 1. the unification of the various approaches developed in recent years with the aim of penetrating into the microscopic world of matter by means of continuum theories; 2. the bridging of the gap between microscopic (or atomic) research on mechanics on one hand, and the phenomenological (or continuum mechanical) approach on the other hand; 3. the physical interpretation and the relation to actual material behaviour of the quantities and laws introduced into the new theories, together with applications; 4. the further development of the theories, where necessary, and the clarification of open questions; 5. a stocktaking of present achievements and the prognosis for future developments. The committee agreed unanimously that the topic of the symposium represented an important phase of current developments in continuum mechanics, from the purely theoretical point of view as well as in connection with possible applications to actual materials.
Download or read book Effects of Radiation on Structural Materials written by James A. Sprague and published by ASTM International. This book was released on 1979 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Science and Technology of Sintering written by Biljana D. Stojanovic and published by Springer Science & Business Media. This book was released on 2011-06-28 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume entitled Advanced Science and Technology of Sintering, contains the edited Proceedings of the Ninth World Round Table Conference on Sintering (IX WRTCS), held in Belgrade, Yugoslavia, September 1-4 1998. The gathering was one in a series of World Round Table Conferences on Sintering organised every four years by the Serbian Academy of Sciences and Arts (SASA) and the International Institute for the Science of Sintering (IISS). The World Round Table Conferences on Sintering have been traditionally held in Yugoslavia. The first meeting was organised in Herceg Novi in 1969 and since then they have regularly gathered the scientific elite in the science of sintering. It is not by chance that, at these conferences, G. C. Kuczynski, G. V. Samsonov, R. Coble, Ya. E. Geguzin and other great names in this branch of science presented their latest results making great qualitative leaps in the its development. Belgrade hosted this conference for the first time. It was chosen as a reminder that 30 years ago it was the place where the International Team for Sintering was formed, further growing into the International Institute for the Science of Sintering. The IX WRTCS lasted four days. It included 156 participants from 17 countries who presented the results of their theoretical and experimental research in 130 papers in the form of plenary lectures, oral presentations and poster sections.
