Download or read book Discrete Event Hybrid Systems in Robotics and Automation written by Tarek M. Sobh and published by . This book was released on 2006 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: The underlying mathematical representation of complex robotic and manufacturing computer-controlled systems is still insufficient to create a set of models which accurately captures the dynamics of the system over the entire range of system operation. We remain in a situation where we must trade of the accuracy of our models with the manageability of the models. Closed-form solutions of mathematical models are almost exclusively limited to linear system models. Computer simulation of non-linear hybrid and discrete-event models provide a means for online design of robotic control systems. Guarantees of system performance are limited to those regions where the robustness conditions apply. These conditions may not apply during start-up and shutdown or during periods of anomalous operation. Attempts have been made to model low and high-level system changes in automated and robotic systems as discrete event dynamic systems, DEDS, and hybrid systems. Several attempts to improve modelling capabilities are focused on mapping the continuous world into a discrete one. However, repeated results are available which indicate that large interactive systems evolve into states where minor events can lead to a catastrophe. Discrete event and hybrid systems have been used in the manufacturing and automation domains to model system state changes within a process. Timed and untimed petri nets and state automata in addition to Markovian-stochastic perturbation and other models have been used extensively to model and control automated manufacturing systems. High level DEDS controllers have also been to guide the behaviour of robots based on sensory outputs. This book presents a collection of problems, modelling strategies, analysis tools, and theoretical frameworks for discrete events and hybrid systems within the robotics and automation domain.
Download or read book Control Systems Robotics and AutomatioN Volume XV written by Heinz D. Unbehauen and published by EOLSS Publications. This book was released on 2009-10-11 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Control Systems, Robotics, and Automation is a component of the global Encyclopedia of Life Support Systems EOLSS, which is an integrated compendium of twenty one Encyclopedias. This 22-volume set contains 240 chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It is the only publication of its kind carrying state-of-the-art knowledge in the fields of Control Systems, Robotics, and Automation and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.
Download or read book Control Systems Robotics and Automation Discrete event and hybrid control systems written by Heinz Unbehauen and published by . This book was released on 2009 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Discrete Event Systems written by Christos G. Cassandras and published by Springer Nature. This book was released on 2021-11-11 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique textbook comprehensively introduces the field of discrete event systems, offering a breadth of coverage that makes the material accessible to readers of varied backgrounds. The book emphasizes a unified modeling framework that transcends specific application areas, linking the following topics in a coherent manner: language and automata theory, supervisory control, Petri net theory, Markov chains and queueing theory, discrete-event simulation, and concurrent estimation techniques. Topics and features: detailed treatment of automata and language theory in the context of discrete event systems, including application to state estimation and diagnosis comprehensive coverage of centralized and decentralized supervisory control of partially-observed systems timed models, including timed automata and hybrid automata stochastic models for discrete event systems and controlled Markov chains discrete event simulation an introduction to stochastic hybrid systems sensitivity analysis and optimization of discrete event and hybrid systems new in the third edition: opacity properties, enhanced coverage of supervisory control, overview of latest software tools This proven textbook is essential to advanced-level students and researchers in a variety of disciplines where the study of discrete event systems is relevant: control, communications, computer engineering, computer science, manufacturing engineering, transportation networks, operations research, and industrial engineering. Christos G. Cassandras is Distinguished Professor of Engineering, Professor of Systems Engineering, and Professor of Electrical and Computer Engineering at Boston University. Stéphane Lafortune is Professor of Electrical Engineering and Computer Science at the University of Michigan, Ann Arbor.
Download or read book CONTROL SYSTEMS ROBOTICS AND AUTOMATION Volume IV written by Heinz Unbehauen and published by EOLSS Publications. This book was released on 2009-10-11 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Control Systems, Robotics, and Automation is a component of the global Encyclopedia of Life Support Systems EOLSS, which is an integrated compendium of twenty one Encyclopedias. This 22-volume set contains 240 chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It is the only publication of its kind carrying state-of-the-art knowledge in the fields of Control Systems, Robotics, and Automation and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.
Download or read book Hybrid Dynamical Systems written by Mohamed Djemai and published by Springer. This book was released on 2014-10-13 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of contributions defining the state of current knowledge and new trends in hybrid systems – systems involving both continuous dynamics and discrete events – as described by the work of several well-known groups of researchers. Hybrid Dynamical Systems presents theoretical advances in such areas as diagnosability, observability and stabilization for various classes of system. Continuous and discrete state estimation and self-triggering control of nonlinear systems are advanced. The text employs various methods, among them, high-order sliding modes, Takagi–Sugeno representation and sampled-data switching to achieve its ends. The many applications of hybrid systems from power converters to computer science are not forgotten; studies of flexible-joint robotic arms and – as representative biological systems – the behaviour of the human heart and vasculature, demonstrate the wide-ranging practical significance of control in hybrid systems. The cross-disciplinary origins of study in hybrid systems are evident. Academic researchers and graduate students interested in hybrid and switched systems need look no further than Hybrid Dynamical Systems for a single source which will bring them up to date with work in this area from around the world.
Download or read book Discrete Event Systems in Robotics and Automation written by Tarek M. Sobh and published by . This book was released on 1994 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modelling Analysis and Design of Hybrid Systems written by S. Engell and published by Springer. This book was released on 2003-07-01 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1995, the Deutsche Forschungsgemeinschaft (DFG), the largest public research funding organization in Germany, decided to launch a priority program (Schw- punktprogramm in German) calledKondisk– Dynamics and Control of Systems with Mixed Continuous and Discrete Dynamics. Such a priority program is usually sponsored for six years and supports about twenty scientists at a time, in engineering andcomputersciencemostlyyoungresearchersworkingforadoctoraldegree. There is a yearly competition across all disciplines of arts and sciences for the funding of such programs, and the group of proposers was the happy winner of a slot in that year. The program started in 1996 after an open call for proposals; the successful projects were presented and re-evaluated periodically, and new projects could be submitted simultaneously. During the course of the focused research program, 25 different projects were funded in 19 participating university institutes, some of the projects were collaborative efforts of two groups with different backgrounds, mostly one from engineering and one from computer science. There were two main motivations for establishingKondisk. The rst was the fact that technical systems nowadays are composed of physical components with (mostly) continuous dynamics and computerized control systems where the reaction to discrete events plays a major role, implemented in Programmable Logic Contr- lers (PLCs), Distributed Control Systems (DCSs) or real-time computer systems.
Download or read book Path Planning of Cooperative Mobile Robots Using Discrete Event Models written by Cristian Mahulea and published by John Wiley & Sons. This book was released on 2020-01-09 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers an integrated presentation for path planning and motion control of cooperative mobile robots using discrete-event system principles Generating feasible paths or routes between a given starting position and a goal or target position—while avoiding obstacles—is a common issue for all mobile robots. This book formulates the problem of path planning of cooperative mobile robots by using the paradigm of discrete-event systems. It presents everything readers need to know about discrete event system models—mainly Finite State Automata (FSA) and Petri Nets (PN)—and methods for centralized path planning and control of teams of identical mobile robots. Path Planning of Cooperative Mobile Robots Using Discrete Event Models begins with a brief definition of the Path Planning and Motion Control problems and their state of the art. It then presents different types of discrete models such as FSA and PNs. The RMTool MATLAB toolbox is described thereafter, for readers who will need it to provide numerical experiments in the last section. The book also discusses cell decomposition approaches and shows how the divided environment can be translated into an FSA by assigning to each cell a discrete state, while the adjacent relation together with the robot's dynamics implies the discrete transitions. Highlighting the benefits of Boolean Logic, Linear Temporal Logic, cell decomposition, Finite State Automata modeling, and Petri Nets, this book also: Synthesizes automatic strategies based on Discrete Event Systems (DES) for path planning and motion control and offers software implementations for the involved algorithms Provides a tutorial for motion planning introductory courses or related simulation-based projects using a MATLAB package called RMTool (Robot Motion Toolbox) Includes simulations for problems solved by methodologies presented in the book Path Planning of Cooperative Mobile Robots Using Discrete Event Models is an ideal book for undergraduate and graduate students and college and university professors in the areas of robotics, artificial intelligence, systems modeling, and autonomous control.
Download or read book CONTROL SYSTEMS ROBOTICS AND AUTOMATION Volume II written by Heinz Unbehauen and published by EOLSS Publications. This book was released on 2009-10-11 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Control Systems, Robotics, and Automation is a component of the global Encyclopedia of Life Support Systems EOLSS, which is an integrated compendium of twenty one Encyclopedias. This 22-volume set contains 240 chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It is the only publication of its kind carrying state-of-the-art knowledge in the fields of Control Systems, Robotics, and Automation and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.
Download or read book Informatics in Control Automation and Robotics II written by Joaquim Filipe and published by Springer Science & Business Media. This book was released on 2007-06-02 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of the best papers presented at the 2nd International Conference on Informatics in Control, Automation and Robotics (ICINCO). ICINCO brought together researchers, engineers and practitioners interested in the application of informatics to Control, Automation and Robotics. The research papers focused on real world applications, covering three main themes: Intelligent Control Systems, Optimization, Robotics and Automation and Signal Processing, Systems Modeling and Control.
Download or read book Modeling and Control of Discrete event Dynamic Systems written by Branislav Hrúz and published by Springer Science & Business Media. This book was released on 2007-08-17 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discrete-event dynamic systems (DEDs) permeate our world. They are of great importance in modern manufacturing processes, transportation and various forms of computer and communications networking. This book begins with the mathematical basics required for the study of DEDs and moves on to present various tools used in their modeling and control. Industrial examples illustrate the concepts and methods discussed, making this book an invaluable aid for students embarking on further courses in control, manufacturing engineering or computer studies.
Download or read book Special Section on Discrete Event Systems in Robotics and Automation written by Tarek M. Sobh and published by . This book was released on 1994 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CONTROL SYSTEMS ROBOTICS AND AUTOMATION Volume XX written by Heinz D. Unbehauen and published by EOLSS Publications. This book was released on 2009-10-11 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Control Systems, Robotics, and Automation is a component of the global Encyclopedia of Life Support Systems EOLSS, which is an integrated compendium of twenty one Encyclopedias. This 22-volume set contains 240 chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It is the only publication of its kind carrying state-of-the-art knowledge in the fields of Control Systems, Robotics, and Automation and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.
Download or read book 2015 U S Higher Education Faculty Awards Vol 2 written by Faculty Awards and published by CRC Press. This book was released on 2022-09-01 with total page 989 pages. Available in PDF, EPUB and Kindle. Book excerpt: Created by professors for professors, the Faculty Awards compendium is the first and only university awards program in the United States based on faculty peer evaluations. The Faculty Awards series recognizes and rewards outstanding faculty members at colleges and universities across the United States.
Download or read book 2015 U S Higher Education Faculty Awards Vol 3 written by Faculty Awards and published by CRC Press. This book was released on 2022-09-01 with total page 859 pages. Available in PDF, EPUB and Kindle. Book excerpt: Created by professors for professors, the Faculty Awards compendium is the first and only university awards program in the United States based on faculty peer evaluations. The Faculty Awards series recognizes and rewards outstanding faculty members at colleges and universities across the United States. Voting was not open to students or the public at large.
Download or read book 2015 U S Higher Education Faculty Awards Vol 1 written by Faculty Awards and published by CRC Press. This book was released on 2022-09-01 with total page 1209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Created by professors for professors, the Faculty Awards compendium is the first and only university awards program in the United States based on faculty peer evaluations. The Faculty Awards series recognizes and rewards outstanding faculty members at colleges and universities across the United States. Voting was not open to students or the public at large.
