Download or read book Directed Nano Patterning of Polymer Nanocomposite Thin Films written by Xiaoteng Wang and published by . This book was released on 2016 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer-nanoparticle (NP) composites have been studied extensively as a core material that exhibits advantageous optical, electrical and mechanical properties in nanotechnology. It has been well-established that a specific distribution state of nanoparticles in a polymer matrix is the key issue to optimize a desired polymer nanocomposite (PNC) property. However effective way of controlling the spatial distribution of nanoparticles is still a recurring challenge. Here we demonstrated facile processing approach to fabricate nanocomposite thin films with controlled nanoparticle dispersion state by exploiting the entropic interactions, thereby controlling the macroscopic performance of the material. The interactions of nanoparticles with polymers are mediated by the ligands attached to the nanoparticles. Location and dispersion of polystyrene grafted titanium dioxide (PS-g-TiO2) and hydroxyl-functionalized polyhedral oligomeric silsesquioxanes (DPOSS) molecular nanoparticles in homopolymer matrices under various annealing conditions were investigated. PS-g-TiO2 NP filled low molecular weight polystyrene thin films were thermally annealed under nanoscale pattern confinement, which was fabricated by imprinting digital recording media discs (DVD) pattern onto polydimethylsiloxane (PDMS). The NP dispersion changed from randomly distributed to aggregating at the elevated regions of the imprinted films due to the entropic interaction caused by the size difference between the particles and the matrix chains. DPOSS-PS is a type of giant shape amphiphiles which are built up by covalent bonding of molecular nanoparticles. When added to low molecular weight homopolymer matrices, DPOSS-PS nanoparticles exhibited better dispersion in PMMA than in PS matrix. Additionally, to understand the morphology transition and phase separation kinetics, various loading fraction of DPOSS-PS were incorporated into PMMA matrix. Phase separation at multiple length scales was observed when the composition of DPOSS-PS is in the range of 5% and 70%.

Download or read book Design and Applications of Nanostructured Polymer Blends and Nanocomposite Systems written by Sabu Thomas and published by William Andrew. This book was released on 2015-09-22 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Applications of Nanostructured Polymer Blend and Nanocomposite Systems offers readers an intelligent, thorough introduction to the design and applications of this new generation of designer polymers with customized properties. The book assembles and covers, in a unified way, the state-of-the-art developments of this less explored type of material. With a focus on nanostructured polymer blends, the book discusses the science of nanostructure formation and the potential performance benefits of nanostructured polymer blends and composites for applications across many sectors: electronics, coatings, adhesives, energy (photovoltaics), aerospace, automotive, and medical devices (biocompatible polymers). The book also describes the design, morphology, and structure of nanostructured polymer composites and blends to achieve specific properties. - Covers all important information for designing and selecting the right nanostructured polymer system - Provides specialized knowledge on self-repairing, nanofibre and nanostructured multiphase materials, as well as evaluation and testing of nanostructured polymer systems - Serves as a reference guide for development of new products in industries ranging from electronics, coatings, and energy, to transport and medical applications - Describes the design, morphology, and structure of nanostructured polymer composites and blends to achieve specific properties

Download or read book Multilayer Thin Films written by Gero Decher and published by John Wiley & Sons. This book was released on 2012-06-11 with total page 1157 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second, comprehensive edition of the pioneering book in this fi eld has been completely revised and extended, now stretching to two volumes. The result is a comprehensive summary of layer-by-layer assembled, truly hybrid nanomaterials and thin fi lms, covering organic, inorganic, colloidal, macromolecular, and biological components, as well as the assembly of nanoscale fi lms derived from them on surfaces. These two volumes are essential for anyone working in the field, as well as scientists and researchers active in materials development, who needs the key knowledge provided herein for linking the field of molecular self-assembly with the bio- and materials sciences.

Download or read book Polymer Thin Films written by Ophelia Kwan Chui Tsui and published by World Scientific. This book was released on 2008 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ch. 1. Block copolymer thin films / J.-Y. Wang, S. Park and T. P. Russell -- ch. 2. Equilibration of block copolymer films on chemically patterned surfaces / G. S. W. Craig, H. Kang and P. F. Nealey -- ch. 3. Structure formation and evolution in confined cylinder-forming block copolymers / G. J. A. Sevink and J. G. E. M. Fraaije -- ch. 4. Block copolymer lithography for magnetic device fabrication / J. Y. Cheng and C. A. Ross -- ch. 5. Hierarchical structuring of polymer nanoparticles by self-organization / M. Shimomura ... [et al.] -- ch. 6. Wrinkling polymers for surface structure control and functionality / E. P. Chan and A. J. Crosby -- ch. 7. Crystallization in polymer thin films: morphology and growth / R. M. Van Horn and S. Z. D. Cheng -- ch. 8. Friction at soft polymer surface / M. K. Chaudhury, K. Vorvolakos and D. Malotky -- ch. 9. Relationship between molecular architecture, large-strain mechanical response and adhesive performance of model, block copolymer-based pressure sensitive adhesives / C. Creton and K. R. Shull -- ch. 10. Stability and dewetting of thin liquid films / K. Jacobs, R. Seemann and S. Herminghaus -- ch. 11. Anomalous dynamics of polymer Films / O. K. C. Tsui.

Download or read book Directed Synthesis written by David J.Fisher and published by Materials Research Forum LLC. This book was released on 2023-11-05 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structure-directed synthesis aims at the design and preparation of novel solid-state structures; using the structure-directing capability of some molecular additive, the so-called structure-directing agent. This general train of thought has led to the development of many weird and wonderful strategies. The book presents an in-depth review of the field and discusses the potential for further developments. Some of the topics are listed under ‘Keywords’. The book references 343 original resources with their direct web links for in-depth reading. Keywords: Directed Synthesis, Multicomponent Colloidal Nanostructures, Nanoparticle-Seed Surfaces, Photocatalytic and Photo-Electrochemical Applications, Synthesis of Nanostructured Metal Oxides and Metal Oxalates, Wide-Bandgap Semiconductors and Metals with Surface Plasmon-Resonance Active Bands, Mesoporous Materials Possessing Multilevel Architectures, Spatially Distinct Nanostructured Organic and Inorganic Arrays, 2- and 3-Dimensional Periodic Composite Structures, Protein-Protein Interaction and DNA Hybridization, Polynuclear Complexes and Coordination Polymers of 3d Metals, Ultra-Small Metal Nanoclusters, Biomolecule-Nanocluster Composites, Nanostructured Sulphur-Carbon Nanotube Cathode.

Download or read book Nanocrystal Quantum Dots written by Victor I. Klimov and published by CRC Press. This book was released on 2017-12-19 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: A review of recent advancements in colloidal nanocrystals and quantum-confined nanostructures, Nanocrystal Quantum Dots is the second edition of Semiconductor and Metal Nanocrystals: Synthesis and Electronic and Optical Properties, originally published in 2003. This new title reflects the book’s altered focus on semiconductor nanocrystals. Gathering contributions from leading researchers, this book contains new chapters on carrier multiplication (generation of multiexcitons by single photons), doping of semiconductor nanocrystals, and applications of nanocrystals in biology. Other updates include: New insights regarding the underlying mechanisms supporting colloidal nanocrystal growth A revised general overview of multiexciton phenomena, including spectral and dynamical signatures of multiexcitons in transient absorption and photoluminescence Analysis of nanocrystal-specific features of multiexciton recombination A review of the status of new field of carrier multiplication Expanded coverage of theory, covering the regime of high-charge densities New results on quantum dots of lead chalcogenides, with a focus studies of carrier multiplication and the latest results regarding Schottky junction solar cells Presents useful examples to illustrate applications of nanocrystals in biological labeling, imaging, and diagnostics The book also includes a review of recent progress made in biological applications of colloidal nanocrystals, as well as a comparative analysis of the advantages and limitations of techniques for preparing biocompatible quantum dots. The authors summarize the latest developments in the synthesis and understanding of magnetically doped semiconductor nanocrystals, and they present a detailed discussion of issues related to the synthesis, magneto-optics, and photoluminescence of doped colloidal nanocrystals as well. A valuable addition to the pantheon of literature in the field of nanoscience, this book presents pioneering research from experts whose work has led to the numerous advances of the past several years.

Download or read book 3D and 4D Printing of Polymer Nanocomposite Materials written by Kishor Kumar Sadasivuni and published by Elsevier. This book was released on 2019-10-11 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D and 4D Printing of Polymer Nanocomposite Materials: Processing, Applications, and Challenges covers advanced 3D and 4D printing processes and the latest developments in novel polymer-based printing materials, thus enabling the reader to understand and benefit from the advantages of this groundbreaking technology. The book presents processes, materials selection, and printability issues, along with sections on the preparation of polymer composite materials for 3D and 4D printing. Across the book, advanced printing techniques are covered and discussed thoroughly, including fused deposition modeling (FDM), selective laser sintering (SLS), selective laser melting (SLM), electron beam melting (EBM), inkjet 3D printing (3DP), stereolithography (SLA), and 3D plotting. Finally, major applications areas are discussed, including electronic, aerospace, construction and biomedical applications, with detailed information on the design, fabrication and processing methods required in each case. Provides a thorough, clear understanding of polymer preparation techniques and 3D and 4D printing processes, with a view to specific applications Examines synthesis, formation methodology, the dispersion of fillers, characterization, properties, and performance of polymer nanocomposites Explores the possibilities of 4D printing, covering the usage of stimuli responsive hydrogels and shape memory polymers

Download or read book Advances in Nanostructured Materials and Nanopatterning Technologies written by Vincenzo Guarino and published by Elsevier. This book was released on 2020-02-11 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Nanostructured Materials and Nanopatterning Technologies: Applications for Healthcare, Environment and Energy demonstrates how to apply micro- and nanofabrication and bioextrusion based systems for cell printing, electrophoretic deposition, antimicrobial applications, and nanoparticles technologies for use in a range of green industry sectors, with an emphasis on emerging applications. - Details strategies to design and realize smart nanostructured/patterned substrates for healthcare and energy and environmental applications - Enables the preparation, characterization and fundamental understanding of nanostructured materials for promising applications in health, environmental and energy related sectors - Provides a broader view of the context around existing projects and techniques, including discussions on potential new routes for fabrication

Download or read book Advanced Fluoropolymer Nanocomposites written by Kalim Deshmukh and published by Elsevier. This book was released on 2023-07-26 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Fluoropolymer Nanocomposites: Fabrication, Processing, Characterization and Applications presents a comprehensive review on the fundamental chemistry, physics, biology and engineering of advanced fluoropolymer nanocomposites. Detailed attention is given to the synthesis, processing characterization, properties and applications of fluoropolymer nanocomposites. Morphological, thermal, electrical, mechanical, tribological and viscoelastic properties are also discussed in detail, along with the influence of synthesis methods on the formation of fluoropolymer nanocomposites, including the effect of nanofiller size and shape and the dispersion state of various nanofillers in different fluoropolymer matrices. This book will be a useful reference resource for scientists, engineers and postgraduate students working in the field of polymer science and technology, materials science and engineering, composites and nanocomposites. This resource will help them find solutions to both fundamental and applied problems associated with their research. It will also assist researchers in becoming more acquainted with the field to address key questions within a short time. - Covers the range of fluoropolymer nanocomposites and their fabrication, processing, structural, physical, thermal, electrical and mechanical properties - Discusses high-performance applications in the electronics, energy, architecture, environmental, biomedical and textile industries - Presents the latest information on disposal and recycling, safety considerations, and the environmental and health impact of fluoropolymer nanocomposites

Download or read book Comprehensive Nanoscience and Technology written by and published by Academic Press. This book was released on 2010-10-29 with total page 2785 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the Introduction: Nanotechnology and its underpinning sciences are progressing with unprecedented rapidity. With technical advances in a variety of nanoscale fabrication and manipulation technologies, the whole topical area is maturing into a vibrant field that is generating new scientific research and a burgeoning range of commercial applications, with an annual market already at the trillion dollar threshold. The means of fabricating and controlling matter on the nanoscale afford striking and unprecedented opportunities to exploit a variety of exotic phenomena such as quantum, nanophotonic and nanoelectromechanical effects. Moreover, researchers are elucidating new perspectives on the electronic and optical properties of matter because of the way that nanoscale materials bridge the disparate theories describing molecules and bulk matter. Surface phenomena also gain a greatly increased significance; even the well-known link between chemical reactivity and surface-to-volume ratio becomes a major determinant of physical properties, when it operates over nanoscale dimensions. Against this background, this comprehensive work is designed to address the need for a dynamic, authoritative and readily accessible source of information, capturing the full breadth of the subject. Its six volumes, covering a broad spectrum of disciplines including material sciences, chemistry, physics and life sciences, have been written and edited by an outstanding team of international experts. Addressing an extensive, cross-disciplinary audience, each chapter aims to cover key developments in a scholarly, readable and critical style, providing an indispensible first point of entry to the literature for scientists and technologists from interdisciplinary fields. The work focuses on the major classes of nanomaterials in terms of their synthesis, structure and applications, reviewing nanomaterials and their respective technologies in well-structured and comprehensive articles with extensive cross-references. It has been a constant surprise and delight to have found, amongst the rapidly escalating number who work in nanoscience and technology, so many highly esteemed authors willing to contribute. Sharing our anticipation of a major addition to the literature, they have also captured the excitement of the field itself in each carefully crafted chapter. Along with our painstaking and meticulous volume editors, full credit for the success of this enterprise must go to these individuals, together with our thanks for (largely) adhering to the given deadlines. Lastly, we record our sincere thanks and appreciation for the skills and professionalism of the numerous Elsevier staff who have been involved in this project, notably Fiona Geraghty, Megan Palmer and Greg Harris, and especially Donna De Weerd-Wilson who has steered it through from its inception. We have greatly enjoyed working with them all, as we have with each other.

Download or read book Polymer Nanocomposites written by Ramanan Krishnamoorti and published by American Chemical Society. This book was released on 2002-01-17 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Nanocomposites: Synthesis, Characterization, and Modeling examines the unique chemical and physical aspects associated with polymer based nanocomposite materials. The volume discusses the latest fundamental and applied research in the field of polymer nanocomposites as well as future directions for the development of high performance materials.

Download or read book Polymer Nanocomposite Materials written by Ye Zhou and published by John Wiley & Sons. This book was released on 2021-03-24 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Nanocomposite Materials Discover an authoritative overview of zero-, one-, and two-dimensional polymer nanomaterials Polymer Nanocomposite Materials: Applications in Integrated Electronic Devices delivers an original and insightful treatment of polymer nanocomposite applications in energy, information, and biotechnology. The book systematically reviews the preparation and characterization of polymer nanocomposites from zero-, one-, and two-dimensional nanomaterials. The two distinguished editors have selected resources that thoroughly explore the applications of polymer nanocomposites in energy, information, and biotechnology devices like sensors, solar cells, data storage devices, and artificial synapses. Academic researchers and professional developers alike will enjoy one of the first books on the subject of this environmentally friendly and versatile new technology. Polymer Nanocomposite Materials discusses challenges associated with the devices and materials, possible strategies for future directions of the technology, and the possible commercial applications of electronic devices built on these materials. Readers will also benefit from the inclusion of: A thorough introduction to the fabrication of conductive polymer composites and their applications in sensors An exploration of biodegradable polymer nanocomposites for electronics and polymer nanocomposites for photodetectors Practical discussions of polymer nanocomposites for pressure sensors and the application of polymer nanocomposites in energy storage devices An examination of functional polymer nanocomposites for triboelectric nanogenerators and resistive switching memory Perfect for materials scientists and polymer chemists, Polymer Nanocomposite Materials: Applications in Integrated Electronic Devices will also earn a place in the libraries of sensor developers, electrical engineers, and other professionals working in the sensor industry seeking an authoritative one-stop reference for nanocomposite applications.

Download or read book Electrohydrodynamic Patterning of Functional Materials written by Pola Goldberg Oppenheimer and published by Springer Science & Business Media. This book was released on 2013-07-23 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis explores a route to induce and control the structure formation process in thin films by the use of strong electric fields. We investigate, establish and apply the use of the electrohydrodynamic (EHD) lithography as a versatile patterning tool on the sub-micrometre and nanometre length scales for functional materials. Thin films are ubiquitous, they are found in nature and used in almost every aspect of daily life. While film instabilities are often undesirable in nature and technology, they can be utilized to produce structures by precisely controlling the destabilization of the film. EHD lithography utilizes instabilities induced by means of an electric field to fabricate periodic structures. EHD patterning is set to become a competitive candidate for low-cost lithographic technology for a number of applications. Herein, the applied potential of this lithographic process is explored by expanding its applicability to a broad range of materials and by a simultaneous patterning of multilayer systems or functional polymers yielding hierarchical architectures with novel functionalities. EHD pattern formation enables for instance, the fabrication of multi-scale structured arrays as surface enhanced Raman scattering (SERS)-active platforms. Furthermore, crystalline and conductive polymers are patterned using the EHD approach and the underlying structure formation mechanisms are discussed. This extension towards functional material systems offers interesting prospects for potential applications. Findings of this thesis are very promising for use in optoelectronic devices.

Download or read book Developments in Block Copolymer Science and Technology written by Ian W. Hamley and published by John Wiley & Sons. This book was released on 2004-07-16 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focuses on recent advances in research on block copolymers, covering chemistry (synthesis), physics (phase behaviors, rheology, modeling), and applications (melts and solutions). Written by a team of internationally respected scientists from industry and academia, this text compiles and reviews the expanse of research that has taken place over the last five years into one accessible resource. Ian Hamley is the world-leading scientist in the field of block copolymer research Presents the recent advances in the area, covering chemistry, physics and applications. Provides a broad coverage from synthesis to fundamental physics through to applications Examines the potential of block copolymers in nanotechnology as self-assembling soft materials

Download or read book Bioinspired Materials Science and Engineering written by Guang Yang and published by John Wiley & Sons. This book was released on 2018-07-04 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative introduction to the science and engineering of bioinspired materials Bioinspired Materials Science and Engineering offers a comprehensive view of the science and engineering of bioinspired materials and includes a discussion of biofabrication approaches and applications of bioinspired materials as they are fed back to nature in the guise of biomaterials. The authors also review some biological compounds and shows how they can be useful in the engineering of bioinspired materials. With contributions from noted experts in the field, this comprehensive resource considers biofabrication, biomacromolecules, and biomaterials. The authors illustrate the bioinspiration process from materials design and conception to application of bioinspired materials. In addition, the text presents the multidisciplinary aspect of the concept, and contains a typical example of how knowledge is acquired from nature, and how in turn this information contributes to biological sciences, with an accent on biomedical applications. This important resource: Offers an introduction to the science and engineering principles for the development of bioinspired materials Includes a summary of recent developments on biotemplated formation of inorganic materials using natural templates Illustrates the fabrication of 3D-tumor invasion models and their potential application in drug assessments Explores electroactive hydrogels based on natural polymers Contains information on turning mechanical properties of protein hydrogels for biomedical applications Written for chemists, biologists, physicists, and engineers, Bioinspired Materials Science and Engineering contains an indispensible resource for an understanding of bioinspired materials science and engineering.

Download or read book Quantum Dot Devices written by Zhiming M. Wang and published by Springer Science & Business Media. This book was released on 2012-05-24 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantum dots as nanomaterials have been extensively investigated in the past several decades from growth to characterization to applications. As the basis of future developments in the field, this book collects a series of state-of-the-art chapters on the current status of quantum dot devices and how these devices take advantage of quantum features. Written by 56 leading experts from 14 countries, the chapters cover numerous quantum dot applications, including lasers, LEDs, detectors, amplifiers, switches, transistors, and solar cells. Quantum Dot Devices is appropriate for researchers of all levels of experience with an interest in epitaxial and/or colloidal quantum dots. It provides the beginner with the necessary overview of this exciting field and those more experienced with a comprehensive reference source.

Download or read book Block Copolymer Nanocomposites written by Galder Kortaberria and published by CRC Press. This book was released on 2016-10-14 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the synthesis and characterization of nanocomposites based on block copolymers. Because of the self-assembly capability of block copolymers for the generation of nanostructures, besides their ability to nanostructure thermosetting matrices such as epoxy and polyester, binary or ternary nanocomposites can be prepared with different nanofillers such as nanoparticles and carbon nanotubes. The book starts with a review on nanocomposites based on block copolymers and nanoparticles synthesized with the use of surfactants, followed by a review on nanocomposites with metallic nanoparticles with polymer brushes and those with carbon nanotubes. A chapter is devoted to binary systems based on block copolymers and nanoparticles synthesized by sol-gel. A review on nanocomposites based on thermosetting matrices nanostructured with block copolymers (amphiphilic or chemically modified) is also presented for both epoxy and polyester resins. The work on ternary systems based on thermosetting matrices, block copolymers, and nanoparticles is presented next. The book concludes with a discussion on nanocomposites based on epoxy and block copolymers with azobenzene groups for optical purposes.