Download or read book Direct Methods for Limit State of Materials and Structures written by Giovanni Garcea and published by Springer Nature. This book was released on 2023-08-23 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of direct methods, such as limit and shakedown analysis, which are intended for avoiding cumbersome step-by-step calculations to determine the limit states of mechanical structures under monotone, cyclic or variable actions with unknown loading history. The book comprises several contributions that demonstrate how tremendous advances in numerical methods, especially in optimization, have contributed to the success of direct methods and their applicability to practical engineering problems in structural mechanics and mechanics of materials. The contents reflect the outcomes of the workshop “Direct Methods for Limit State of Materials and Structures,” held in Cosenza, Italy in June 2022.
Download or read book Direct Methods for Limit States in Structures and Materials written by Konstantinos Spiliopoulos and published by Springer Science & Business Media. This book was released on 2013-08-13 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowing the safety factor for limit states such as plastic collapse, low cycle fatigue or ratcheting is always a major design consideration for civil and mechanical engineering structures that are subjected to loads. Direct methods of limit or shakedown analysis that proceed to directly find the limit states offer a better alternative than exact time-stepping calculations as, on one hand, an exact loading history is scarcely known, and on the other they are much less time-consuming. This book presents the state of the art on various topics concerning these methods, such as theoretical advances in limit and shakedown analysis, the development of relevant algorithms and computational procedures, sophisticated modeling of inelastic material behavior like hardening, non-associated flow rules, material damage and fatigue, contact and friction, homogenization and composites.
Download or read book Limit States of Materials and Structures written by Dieter Weichert and published by Springer Science & Business Media. This book was released on 2009-02-22 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: To predict loading limits for structures and structural elements is one of the oldest and most important tasks of engineers. Among the theoretical and numericalmethodsavailableforthispurpose,so-called“DirectMethods”,- bracing Limit- and Shakedown Analysis, play an eminent role due to the fact that they allow rapid access to the requested information in mathematically constructive manners. The collection of papers in this book is the outcome of a workshop held at Aachen University of Technology in November 2007. The individual c- tributions stem in particular from the areas of new numerical developments renderingthemethodsmoreattractive forindustrialdesign,extensionsofthe general methodology to new horizons of application, probabilistic approaches and concrete technological applications. The papers are arranged according to the order of the presentations in the workshop and give an excellent insight into state-of-the-art developments in this broad and growing ?eld of research. The editors warmly thank all the scientists, who have contributed by their outstanding papers to the quality of this edition. Special thanks go to Jaan Simon for his great help in putting together the manuscript to its ?nal shape.
Download or read book Limit State of Materials and Structures written by Géry de Saxcé and published by Springer Science & Business Media. This book was released on 2012-10-18 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: To determine the carrying capacity of a structure or a structural element susceptible to operate beyond the elastic limit is an important task in many situations of both mechanical and civil engineering. The so-called “direct methods” play an increasing role due to the fact that they allow rapid access to the request information in mathematically constructive manners. They embrace Limit Analysis, the most developed approach now widely used, and Shakedown Analysis, a powerful extension to the variable repeated loads potentially more economical than step-by-step inelastic analysis. This book is the outcome of a workshop held at the University of Sciences and Technology of Lille. The individual contributions stem from the areas of new numerical developments rendering this methods more attractive for industrial design, extension of the general methodology to new horizons, probabilistic approaches and concrete technological applications.
Download or read book Direct Methods for Limit and Shakedown Analysis of Structures written by Paolo Fuschi and published by Springer. This book was released on 2015-01-06 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Articles in this book examine various materials and how to determine directly the limit state of a structure, in the sense of limit analysis and shakedown analysis. Apart from classical applications in mechanical and civil engineering contexts, the book reports on the emerging field of material design beyond the elastic limit, which has further industrial design and technological applications. Readers will discover that “Direct Methods” and the techniques presented here can in fact be used to numerically estimate the strength of structured materials such as composites or nano-materials, which represent fruitful fields of future applications. Leading researchers outline the latest computational tools and optimization techniques and explore the possibility of obtaining information on the limit state of a structure whose post-elastic loading path and constitutive behavior are not well defined or well known. Readers will discover how Direct Methods allow rapid and direct access to requested information in mathematically constructive manners without cumbersome step-by-step computation. Both researchers already interested or involved in the field and practical engineers who want to have a panorama of modern methods for structural safety assessment will find this book valuable. It provides the reader with the latest developments and a significant amount of references on the topic.
Download or read book Advances in Direct Methods for Materials and Structures written by Olga Barrera and published by Springer. This book was released on 2017-08-22 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a state-of-the-art overview and includes recent developments of various direct computational analysis methods. It is based on recently developed and widely employed numerical procedures for limit and shakedown analysis of structures and their extensions to a wide range of physical problems relevant to the design of materials and structural components. The book can be used as a complementary text for advanced academic courses on computational mechanics, structural mechanics, soil mechanics and computational plasticity and it can be used a research text.
Download or read book Direct Methods written by Aurora Angela Pisano and published by Springer Nature. This book was released on 2020-07-16 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of direct methods such as limit and shakedown analysis, which are intended to do away with the need for cumbersome step-by-step calculations and determine the loading limits of mechanical structures under monotone, cyclic or variable loading with unknown loading history. The respective contributions demonstrate how tremendous advances in numerical methods, especially in optimization, have contributed to the success of direct methods and their practical applicability to engineering problems in structural mechanics, pavement and general soil mechanics, as well as the design of composite materials. The content reflects the outcomes of the workshop “Direct Methods: Methodological Progress and Engineering Applications,” which was offered as a mini-symposium of PCM-CMM 2019, held in Cracow, Poland in September 2019.
Download or read book Shell Structures Theory and Applications written by Wojciech Pietraszkiewicz and published by CRC Press. This book was released on 2013-09-18 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shells are basic structural elements of modern technology and everyday life. Examples are automobile bodies, water and oil tanks, pipelines, aircraft fuselages, nanotubes, graphene sheets or beer cans. Also nature is full of living shells such as leaves of trees, blooming flowers, seashells, cell membranes, the double helix of DNA or wings of insec
Download or read book Direct Methods for Limit State of Materials and Structures written by Giovanni Garcea and published by Springer. This book was released on 2023-06-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of direct methods, such as limit and shakedown analysis, which are intended for avoiding cumbersome step-by-step calculations to determine the limit states of mechanical structures under monotone, cyclic or variable actions with unknown loading history. The book comprises several contributions that demonstrate how tremendous advances in numerical methods, especially in optimization, have contributed to the success of direct methods and their applicability to practical engineering problems in structural mechanics and mechanics of materials. The contents reflect the outcomes of the workshop “Direct Methods for Limit State of Materials and Structures,” held in Cosenza, Italy in June 2022.
Download or read book Computational Modelling of Concrete and Concrete Structures written by Günther Meschke and published by CRC Press. This book was released on 2022-05-22 with total page 1500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Modelling of Concrete and Concrete Structures contains the contributions to the EURO-C 2022 conference (Vienna, Austria, 23-26 May 2022). The papers review and discuss research advancements and assess the applicability and robustness of methods and models for the analysis and design of concrete, fibre-reinforced and prestressed concrete structures, as well as masonry structures. Recent developments include methods of machine learning, novel discretisation methods, probabilistic models, and consideration of a growing number of micro-structural aspects in multi-scale and multi-physics settings. In addition, trends towards the material scale with new fibres and 3D printable concretes, and life-cycle oriented models for ageing and durability of existing and new concrete infrastructure are clearly visible. Overall computational robustness of numerical predictions and mathematical rigour have further increased, accompanied by careful model validation based on respective experimental programmes. The book will serve as an important reference for both academics and professionals, stimulating new research directions in the field of computational modelling of concrete and its application to the analysis of concrete structures. EURO-C 2022 is the eighth edition of the EURO-C conference series after Innsbruck 1994, Bad Gastein 1998, St. Johann im Pongau 2003, Mayrhofen 2006, Schladming 2010, St. Anton am Arlberg 2014, and Bad Hofgastein 2018. The overarching focus of the conferences is on computational methods and numerical models for the analysis of concrete and concrete structures.
Download or read book Stochastic Analysis of Offshore Steel Structures written by Halil Karadeniz and published by Springer Science & Business Media. This book was released on 2012-08-01 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stochastic Analysis of Offshore Steel Structures provides a clear and detailed guide to advanced analysis methods of fixed offshore steel structures using 3D beam finite elements under random wave and earthquake loadings. Advanced and up-to-date research results are coupled with modern analysis methods and essential theoretical information to consider optimal solutions to structural issues. As these methods require and use knowledge of different subject matters, a general introduction to the key areas is provided. This is followed by in-depth explanations supported by design examples, relevant calculations and supplementary material containing related computer programmers. By combining this theoretical and practical approach Stochastic Analysis of Offshore Steel Structures cover a range of key concepts in detail including: The basic principles of standard 3D beam finite elements and special connections, Wave loading - from hydrodynamics to the calculation of wave loading on structural members, Stochastic response calculations with corresponding solution algorithms including earthquakes, and Fatigue damage, reliability calculation and reliability based design optimization. The broad and detailed coverage makes this a solid reference for research oriented studies and practical sophisticated design methods. Students, researchers, insuring bodies and practical designer offices can turn to Stochastic Analysis of Offshore Steel Structures to broaden their theoretical understanding and develop their practical designs and applications of 3D finite analysis in fixed offshore steel structures.
Download or read book Natural Fiber Textile Composite Engineering written by Magdi El Messiry and published by CRC Press. This book was released on 2017-07-06 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural Fiber Textile Composite Engineering sheds light on the area of the natural fiber textile composites with new research on their applications, the material used, the methods of preparation, the different types of polymers, the selection of raw materials, the elements of design the natural fiber textile polymer composites for a particular end use, their manufacturing techniques, and finally their life cycle assessments (LCA). The volume also addresses the important issue in the materials science of how to utilize natural fibers as an enhancement to composite materials. Natural fiber-reinforced polymer composites have been proven to provide a combination of superior mechanical property, dielectric property, and environmental advantages such as renewability and biodegradability. Natural fibers, some from agricultural waste products, can replace existing metallic and plastic parts and help to alleviate the environmental problem of increasing amounts of agriculture residual. The book is divided into four sections, covering: applications of natural fiber polymer composites design of natural fiber polymer composites composite manufacturing techniques and agriculture waste manufacturing composite material testing methods The first section of the book deals with the application of textile composites in the industry and the properties of the natural fibers, providing an understanding of the history of natural fiber composites as well as an analysis of the different properties of different natural fibers. The second section goes on to explain the textile composites, their classification, different composite manufacturing techniques, and the different pretreatment methods for the natural fibers to be used in composite formation. It also analyzes the composite material design under different types of loading and the mechanism of failure of the natural fiber composite. The effect of the fiber volume fraction of different textile structures is explained. The third section of the book, on composite manufacturing techniques and agriculture waste manufacturing, concerns the natural fiber composite manufacturing techniques, agricultural waste, and the methods of their preparation to be used successfully in the composite, either in the form of fibers particles or nanoparticles. The book then considers the testing methods of the different composite components as well as the final composite materials, giving the principle of the testing standards, either distractive or nondestructive. This book attempts to fill the gap between the role of the textile engineer and the role of the designer of composites from natural fibers. It provides important information on the application of textile composites for textile engineers, materials engineers, and researchers in the area of composite materials.
Download or read book Computational Modeling of Masonry Structures Using the Discrete Element Method written by Sarhosis, Vasilis and published by IGI Global. This book was released on 2016-06-09 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Discrete Element Method (DEM) has emerged as a solution to predicting load capacities of masonry structures. As one of many numerical methods and computational solutions being applied to evaluate masonry structures, further research on DEM tools and methodologies is essential for further advancement. Computational Modeling of Masonry Structures Using the Discrete Element Method explores the latest digital solutions for the analysis and modeling of brick, stone, concrete, granite, limestone, and glass block structures. Focusing on critical research on mathematical and computational methods for masonry analysis, this publication is a pivotal reference source for scholars, engineers, consultants, and graduate-level engineering students.
Download or read book Artificial Intelligence and Computational Intelligence written by Fu Lee Wang and published by Springer. This book was released on 2010-10-21 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2010 International Conference on Artificial Intelligence and Computational Intelligence (AICI 2010) was held October 23–24, 2010 in Sanya, China. The AICI 2010 received 1,216 submissions from 20 countries and regions. After rigorous reviews, 105 high-quality papers were selected for publication in the AICI 2010 proceedings. The acceptance rate was 8%. The aim of AICI 2010 was to bring together researchers working in many different areas of artificial intelligence and computational intelligence to foster the exchange of new ideas and promote international collaborations. In addition to the large number of submitted papers and invited sessions, there were several internationally well-known keynote speakers. On behalf of the Organizing Committee, we thank Hainan Province Institute of Computer and Qiongzhou University for its sponsorship and logistics support. We also thank the members of the Organizing Committee and the Program Committee for their hard work. We are very grateful to the keynote speakers, invited session organizers, session chairs, reviewers, and student helpers. Last but not least, we thank all the authors and participants for their great contributions that made this conference possible.
Download or read book CEB FIP international recommandations for the design and construction of concrete structures Vol 1 principles and recommandation written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1970-06-01 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Boundary Elements and Other Mesh Reduction Methods XXXIII written by C. A. Brebbia and published by WIT Press. This book was released on 2011 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Wessex Institute of Technology has been convening conferences on the Boundary Element Method since 1978. The now-annual conference series is recognised internationally as the premiere forum for sharing the latest advances on the boundary element method and other meshless techniques and their applications, which continue to evolve and grow in importance. The papers presented at the latest conference will cover topics such as Advanced meshless and mesh reduction methods; Heat and mass transfer; Electrical engineering and electromagnetics; Fluid flow; Advanced formulations; Computational techniques; Advanced structural applications; Dynamics and vibrations; Damage mechanics and fracture; Material characterisation; Financial engineering applications; Stochastic modelling; and Emerging applications..
Download or read book Probabilistic Methods in Geotechnical Engineering written by K.S. Li and published by CRC Press. This book was released on 2020-08-19 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of this conference contain keynote addresses on recent developments in geotechnical reliability and limit state design in geotechnics. It also contains invited lectures on such topics as modelling of soil variability, simulation of random fields and probability of rock joints. Contents: Keynote addresses on recent development on geotechnical reliability and limit state design in geotechnics, and invited lectures on modelling of soil variability, simulation of random field, probabilistic of rock joints, and probabilistic design of foundations and slopes. Other papers on analytical techniques in geotechnical reliability, modelling of soil properties, and probabilistic analysis of slopes, embankments and foundations.
