Download or read book Digitally Assisted Analog and Analog Assisted Digital IC Design written by Xicheng Jiang and published by Cambridge University Press. This book was released on 2015-07-23 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover cutting-edge techniques for next-generation integrated circuit design, and learn how to deliver improved speed, density, power, and cost.

Download or read book Digitally Assisted Analog and Analog Assisted Digital IC Design written by Xicheng Jiang and published by Cambridge University Press. This book was released on 2015-07-23 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Achieve enhanced performance with this guide to cutting-edge techniques for digitally-assisted analog and analog-assisted digital integrated circuit design. • Discover how architecture and circuit innovations can deliver improved performance in terms of speed, density, power, and cost • Learn about practical design considerations for high-performance scaled CMOS processes, FinFet devices and architectures, and the implications of FD SOI technology • Get up to speed with established circuit techniques that take advantage of scaled CMOS process technology in analog, digital, RF and SoC designs, including digitally-assisted techniques for data converters, DSP enabled frequency synthesizers, and digital controllers for switching power converters. With detailed descriptions, explanations, and practical advice from leading industry experts, this is an ideal resource for practicing engineers, researchers, and graduate students working in circuit design.

Download or read book Analog Circuit Design for Process Variation Resilient Systems on a Chip written by Marvin Onabajo and published by Springer Science & Business Media. This book was released on 2012-03-08 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes several techniques to address variation-related design challenges for analog blocks in mixed-signal systems-on-chip. The methods presented are results from recent research works involving receiver front-end circuits, baseband filter linearization, and data conversion. These circuit-level techniques are described, with their relationships to emerging system-level calibration approaches, to tune the performances of analog circuits with digital assistance or control. Coverage also includes a strategy to utilize on-chip temperature sensors to measure the signal power and linearity characteristics of analog/RF circuits, as demonstrated by test chip measurements. Describes a variety of variation-tolerant analog circuit design examples, including from RF front-ends, high-performance ADCs and baseband filters; Includes built-in testing techniques, linked to current industrial trends; Balances digitally-assisted performance tuning with analog performance tuning and mismatch reduction approaches; Describes theoretical concepts as well as experimental results for test chips designed with variation-aware techniques.

Download or read book Analog Circuit Design for Process Variation Resilient Systems on a Chip written by Marvin Onabajo and published by Springer. This book was released on 2012-03-08 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes several techniques to address variation-related design challenges for analog blocks in mixed-signal systems-on-chip. The methods presented are results from recent research works involving receiver front-end circuits, baseband filter linearization, and data conversion. These circuit-level techniques are described, with their relationships to emerging system-level calibration approaches, to tune the performances of analog circuits with digital assistance or control. Coverage also includes a strategy to utilize on-chip temperature sensors to measure the signal power and linearity characteristics of analog/RF circuits, as demonstrated by test chip measurements. Describes a variety of variation-tolerant analog circuit design examples, including from RF front-ends, high-performance ADCs and baseband filters; Includes built-in testing techniques, linked to current industrial trends; Balances digitally-assisted performance tuning with analog performance tuning and mismatch reduction approaches; Describes theoretical concepts as well as experimental results for test chips designed with variation-aware techniques.

Download or read book Fundamentals of Modern VLSI Devices written by Yuan Taur and published by Cambridge University Press. This book was released on 2021-12-02 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thoroughly updated third edition of an classic and widely adopted text, perfect for practical transistor design and in the classroom. Covering a variety of recent developments, the internationally renowned authors discuss in detail the basic properties and designs of modern VLSI devices, as well as factors affecting performance. Containing around 25% new material, coverage has been expanded to include high-k gate dielectrics, metal gate technology, strained silicon mobility, non-GCA (Gradual Channel Approximation) modelling of MOSFETs, short-channel FinFETS, and symmetric lateral bipolar transistors on SOI. Chapters have been reorganized to integrate the appendices into the main text to enable a smoother learning experience, and numerous additional end-of-chapter homework exercises (+30%) are included to engage students with real-world problems and test their understanding. A perfect text for senior undergraduate and graduate students taking advanced semiconductor devices courses, and for practicing silicon device professionals in the semiconductor industry.

Download or read book Mixed Signal Methodology Guide written by Jess Chen and published by Lulu.com. This book was released on 2012 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, the Mixed-signal Methodology Guide: Advanced Methodology for AMS IP and SoC Design, Verification, and Implementation provides a broad overview of the design, verification and implementation methodologies required for today's mixed-signal designs. The book covers mixed-signal design trends and challenges, abstraction of analog using behavioral models, assertion-based metric-driven verification methodology applied on analog and mixed-signal and verification of low power intent in mixed-signal design. It also describes methodology for physical implementation in context of concurrent mixed-signal design and for handling advanced node physical effects. The book contains many practical examples of models and techniques. The authors believe it should serve as a reference to many analog, digital and mixed-signal designers, verification, physical implementation engineers and managers in their pursuit of information for a better methodology required to address the challenges of modern mixed-signal design.

Download or read book Computer Aided Design of Analog Integrated Circuits and Systems written by Rob A. Rutenbar and published by John Wiley & Sons. This book was released on 2002-05-06 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tools and techniques you need to break the analog design bottleneck! Ten years ago, analog seemed to be a dead-end technology. Today, System-on-Chip (SoC) designs are increasingly mixed-signal designs. With the advent of application-specific integrated circuits (ASIC) technologies that can integrate both analog and digital functions on a single chip, analog has become more crucial than ever to the design process. Today, designers are moving beyond hand-crafted, one-transistor-at-a-time methods. They are using new circuit and physical synthesis tools to design practical analog circuits; new modeling and analysis tools to allow rapid exploration of system level alternatives; and new simulation tools to provide accurate answers for analog circuit behaviors and interactions that were considered impossible to handle only a few years ago. To give circuit designers and CAD professionals a better understanding of the history and the current state of the art in the field, this volume collects in one place the essential set of analog CAD papers that form the foundation of today's new analog design automation tools. Areas covered are: * Analog synthesis * Symbolic analysis * Analog layout * Analog modeling and analysis * Specialized analog simulation * Circuit centering and yield optimization * Circuit testing Computer-Aided Design of Analog Integrated Circuits and Systems is the cutting-edge reference that will be an invaluable resource for every semiconductor circuit designer and CAD professional who hopes to break the analog design bottleneck.

Download or read book Analog Circuit Design written by Rudy J. van de Plassche and published by Springer Science & Business Media. This book was released on 2000-09-30 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of Analog Circuit Design concentrates on 3 topics: High-Speed Analog-to-Digital Converters, Mixed Signal Design and PLLs and Synthesizers. The book comprises 6 papers on each topic written by internationally recognized experts. These papers have a tutorial nature aimed at improving the design of analog circuits. The book is divided into 3 parts: Part I, High-Speed Analog-to-Digital Converters, describes the latest techniques for producing analog-to-digital converters for applications in disk drives, radio circuits, XDSL and super HiFi audio conversion. Converters having resolutions between 7-bit and 12-bit using CMOS techniques are presented. A 13-bit bandpass sigma-delta modulator for IF signal conversion concludes this part. Part II, Mixed Signal Design, presents papers that detail nearly all known techniques and design issues for mixed signal circuits using CAD tools. Applications for telecom, sigma-delta converters, systems-on-a-chip and RF circuitry are described. Part III, PLLs and Synthesizers, illustrates up-to-date techniques for combination of inductors on a CMOS chip together with PLL techniques to obtain low-noise frequency synthesizers for telecom applications. Special attention is paid to fractional N synthesizers using sigma-delta algorithms. Analog Circuit Design is an essential reference source for analog design engineers and researchers wishing to keep abreast with the latest developments in the field. The tutorial nature of the contributions also makes it suitable for use in an advanced design course.

Download or read book Computer Aided Design of Analog Circuits and Systems written by L. Richard Carley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer-Aided Design of Analog Circuits and Systems brings together in one place important contributions and state-of-the-art research results in the rapidly advancing area of computer-aided design of analog circuits and systems. This book serves as an excellent reference, providing insights into some of the most important issues in the field.

Download or read book Analog Circuit Design written by Willy Sansen and published by Springer Science & Business Media. This book was released on 1996-10-31 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the revised contributions of all the speakers of the fifth AACD Workshop which was held in Lausanne on April 2-4, 1996. It was organized by Dr Vlado Valence of the EPFL University and MEAD of Lausanne. The program consisted of six tutorials per day during three days. The tutorials were presented by experts in the field. They were selected by a program committee consisting of Prof. Willy Sansen of the Katholieke Universiteit Leuven, Prof. Rudy van de Plassche of Philips Research and the University of Technology Eindhoven and Prof. 10han Huijsing of the Delft University of Technology. The three topics mentioned above have been selected because of their importance in present days analog design. The other topics that have been discussed before are: in 1992 : Operational amplifiers Analog to digital convereters Analog computer aided design in 1993 : Mixed AID cicuit design Sensor interface circuits Communication circuits in 1994 : Low-power low-voltage design Integrated filters Smart power circuits in 1995 : Low-noise, low-power, low-voltage design Mixed-mode design with CAD tools Voltage, current and time references Each AACD workhop has given rise to the publication of a book by Kluwer entitled "Analog Circuit Design". This is thus the fifth book. This series of books provides a valuable overview of all analog circuit design techniques and achievements. It is a reference for whoever is engaged in this discipline.

Download or read book Analog Circuit Design written by Johan Huijsing and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Johan H. Huijsing This book contains 18 tutorial papers concentrated on 3 topics, each topic being covered by 6 papers. The topics are: Low-Noise, Low-Power, Low-Voltage Mixed-Mode Design with CAD Tools Voltage, Current, and Time References The papers of this book were written by top experts in the field, currently working at leading European and American universities and companies. These papers are the reviewed versions of the papers presented at the Workshop on Advances in Analog Circuit Design. which was held in Villach, Austria, 26-28 April 1995. The chairman of the Workshop was Dr. Franz Dielacher from Siemens, Austria. The program committee existed of Johan H. Huijsing from the Delft University of Technology, Prof.Willy Sansen from the Catholic University of Leuven, and Dr. Rudy 1. van der Plassche from Philips Eindhoven. This book is the fourth of aseries dedicated to the design of analog circuits. The topics which were covered earlier were: Operational Amplifiers Analog to Digital Converters Analog Computer Aided Design Mixed AlD Circuit Design Sensor Interface Circuits Communication Circuits Low-Power, Low-Voltage Integrated Filters Smart Power As the Workshop will be continued year by year, a valuable series of topics will be built up from all the important areas of analog circuit design. I hope that this book will help designers of analog circuits to improve their work and to speed it up.

Download or read book Digitally Assisted Pipeline ADCs written by Boris Murmann and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digitally Assisted Pipeline ADCs: Theory and Implementation explores the opportunity to reduce ADC power dissipation by leveraging digital signal processing capabilities in fine line integrated circuit technology. The described digitally assisted pipelined ADC uses a statistics-based system identification technique as an enabling element to replace precision residue amplifiers with simple open-loop gain stages. The digital compensation of analog circuit distortion eliminates one key factor in the classical noise-speed-linearity constraint loop and thereby enables a significant power reduction. Digitally Assisted Pipeline ADCs: Theory and Implementation describes in detail the implementation and measurement results of a 12-bit, 75-MSample/sec proof-of-concept prototype. The Experimental converter achieves power savings greater than 60% over conventional implementations. Digitally Assisted Pipeline ADCs: Theory and Implementation will be of interest to researchers and professionals interested in advances of state-of-the-art in A/D conversion techniques.

Download or read book High Performance AD and DA Converters IC Design in Scaled Technologies and Time Domain Signal Processing written by Pieter Harpe and published by Springer. This book was released on 2014-07-23 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the 18 tutorials presented during the 23rd workshop on Advances in Analog Circuit Design. Expert designers present readers with information about a variety of topics at the frontier of analog circuit design, serving as a valuable reference to the state-of-the-art, for anyone involved in analog circuit research and development.

Download or read book Introduction to Analog VLSI Design Automation written by Mohammed Ismail and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very large scale integration (VLSI) technologies are now maturing with a current emphasis toward submicron structures and sophisticated applications combining digital as well as analog circuits on a single chip. Abundant examples are found on today's advanced systems for telecom munications, robotics, automotive electronics, image processing, intelli gent sensors, etc .. Exciting new applications are being unveiled in the field of neural computing where the massive use of analog/digital VLSI technologies will have a significant impact. To match such a fast technological trend towards single chip ana logi digital VLSI systems, researchers worldwide have long realized the vital need of producing advanced computer aided tools for designing both digital and analog circuits and systems for silicon integration. Ar chitecture and circuit compilation, device sizing and the layout genera tion are but a few familiar tasks on the world of digital integrated circuit design which can be efficiently accomplished by matured computer aided tools. In contrast, the art of tools for designing and producing analog or even analogi digital integrated circuits is quite primitive and still lack ing the industrial penetration and acceptance already achieved by digital counterparts. In fact, analog design is commonly perceived to be one of the most knowledge-intensive design tasks and analog circuits are still designed, largely by hand, by expert intimately familiar with nuances of the target application and integrated circuit fabrication process. The techniques needed to build good analog circuits seem to exist solely as expertise invested in individual designers.

Download or read book Advanced Data Converters written by Gabriele Manganaro and published by Cambridge University Press. This book was released on 2011-11-17 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Need to get up to speed quickly on the latest advances in high performance data converters? Want help choosing the best architecture for your application? With everything you need to know about the key new converter architectures, this guide is for you. It presents basic principles, circuit and system design techniques and associated trade-offs, doing away with lengthy mathematical proofs and providing intuitive descriptions upfront. Everything from time-to-digital converters to comparator-based/zero-crossing ADCs is covered and each topic is introduced with a short summary of the essential basics. Practical examples describing actual chips, along with extensive comparison between architectural or circuit options, ease architecture selection and help you cut design time and engineering risk. Trade-offs, advantages and disadvantages of each option are put into perspective with a discussion of future trends, showing where this field is heading, what is driving it and what the most important unanswered questions are.

Download or read book Analog Circuit Design written by Jim Williams and published by Newnes. This book was released on 1991-06-19 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is far more than just another tutorial or reference guide - it's a tour through the world of analog design, combining theory and applications with the philosophies behind the design process. Readers will learn how leading analog circuit designers approach problems and how they think about solutions to those problems. They'll also learn about the `analog way' - a broad, flexible method of thinking about analog design tasks. A comprehensive and useful guide to analog theory and applications Covers visualizing the operation of analog circuits Looks at how to rapidly determine workable approximations of analog circuit parameters

Download or read book Analog Circuit Design written by Willy M.C. Sansen and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume concentrates on three topics: mixed analog--digital circuit design, sensor interface circuits and communication circuits. The book comprises six papers on each topic of a tutorial nature aimed at improving the design of analog circuits. The book is divided into three parts. Part I: Mixed Analog--Digital Circuit Design considers the largest growth area in microelectronics. Both standard designs and ASICs have begun integrating analog cells and digital sections on the same chip. The papers cover topics such as groundbounce and supply-line spikes, design methodologies for high-level design and actual mixed analog--digital designs. Part II: Sensor Interface Circuits describes various types of signal conditioning circuits and interfaces for sensors. These include interface solutions for capacitive sensors, sigma--delta modulation used to combine a microprocessor compatible interface with on chip CMOS sensors, injectable sensors and responders, signal conditioning circuits and sensors combined with indirect converters. Part III: Communication Circuits concentrates on systems and implemented circuits for use in personal communication systems. These have applications in cordless telephones and mobile telephone systems for use in cellular networks. A major requirement for these systems is low power consumption, especially when operating in standby mode, so as to maximise the time between battery recharges.