Download or read book Smart Digital Manufacturing written by Rene Wolf and published by John Wiley & Sons. This book was released on 2020-10-02 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world progresses toward Industry 4.0, and manufacturers are challenged to successfully navigate this unique digital journey. To some, digitalization is a golden opportunity; to others, it is a necessary evil. But to optimist and pessimist alike, there is a widespread puzzlement over the practical details of digitalization. To many manufacturers, digital transformation is a vague and confusing concept they nevertheless must grapple with in order to survive the Fourth Industrial Revolution. The proliferation of digital manufacturing technologies adds to the confusion, leaving many manufacturers perplexed and unprepared, with little real insight into how emerging technologies can help them sustain a competitive edge in their markets. This book effectively conveys Siemens's knowledge and experience through a concept called "Smart Digital Manufacturing," a stepwise approach to realizing the promise of the Fourth Industrial Revolution. The Smart Digital Manufacturing roadmap provides guidance and enables low-risk, high-reward adoption of new manufacturing software technologies through a series of tipping-point investment decisions that result in optimized manufacturing performance. The book provides readers with a clear understanding of what digital technology has to offer them, and how and when to invest in these essential components of tomorrow?s factories. René Wolf is Senior Vice President of Manufacturing Operations Management Software for Siemens Digital Industries Software, a business unit of the Siemens Digital Factory Division. Raffaello Lepratti is Vice President of Business Development and Marketing for Siemens Digital Industries Software.

Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer. This book was released on 2014-11-26 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. This book also: Reflects recent developments and trends and adheres to the ASTM, SI, and other standards Includes chapters on automotive technology, aerospace technology and low-cost AM technologies Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered

Download or read book Digital Manufacturing written by Chandrakant D. Patel and published by Elsevier. This book was released on 2022-07-06 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Manufacturing: The Industrialization of "Art to Part" 3D Additive Printing explains everything needed to understand how recent advances in materials science, manufacturing engineering and digital design have integrated to create exciting new capabilities. Sections discuss relevant fundamentals in mechanical engineering and materials science and complex and practical topics in additive manufacturing, such as part manufacturing, all in the context of the modern digital design environment. Being successful in today's "art to part" cyber-physical manufacturing age requires a strong grounding in science and engineering fundamentals as well as knowledge of the latest techniques, all of which readers will find here. Every chapter is developed by leading specialists and based on first-hand experiences, capturing the essential knowledge readers need to solve problems related to digital manufacturing. - Helps produce the "T-shaped" engineers needed in today's digital manufacturing age by providing carefully selected foundational information from a range of disciplines - Covers every step in the additive manufacturing process, from product design through inspection - Addresses business models and socioeconomic trends related to cyber physical manufacturing, along with technical aspects

Download or read book Digital Twin Driven Smart Manufacturing written by Fei Tao and published by Academic Press. This book was released on 2019-02-07 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Twin Driven Smart Manufacturing examines the background, latest research, and application models for digital twin technology, and shows how it can be central to a smart manufacturing process.The interest in digital twin in manufacturing is driven by a need for excellent product reliability, and an overall trend towards intelligent, and connected manufacturing systems. This book provides an ideal entry point to this subject for readers in industry and academia, as it answers the questions: (a) What is a digital twin? (b) How to construct a digital twin? (c) How to use a digital twin to improve manufacturing efficiency? (d) What are the essential activities in the implementation of a digital twin? (e) What are the most important obstacles to overcome for the successful deployment of a digital twin? (f) What are the relations between digital twin and New Technologies? (g) How to combine digital twin with the New Technologies to achieve high efficiency and smartness in manufacturing?This book focuses on these problems as it aims to help readers make the best use of digital twin technology towards smart manufacturing. - Analyzes the differences, synergies and possibilities for integration between digital twin technology and other technologies, such as big data, service and Internet of Things - Discuss new requirements for a traditional three-dimension digital twin and proposes a methodology for a five-dimension version - Investigates new models for optimized manufacturing, prognostics and health management, and cyber-physical fusion based on the digital twin

Download or read book Fundamentals of Digital Manufacturing Science written by Zude Zhou and published by Springer Science & Business Media. This book was released on 2011-10-22 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacturing industry will reap significant benefits from encouraging the development of digital manufacturing science and technology. Digital Manufacturing Science uses theorems, illustrations and tables to introduce the definition, theory architecture, main content, and key technologies of digital manufacturing science. Readers will be able to develop an in-depth understanding of the emergence and the development, the theoretical background, and the techniques and methods of digital manufacturing science. Furthermore, they will also be able to use the basic theories and key technologies described in Digital Manufacturing Science to solve practical engineering problems in modern manufacturing processes. Digital Manufacturing Science is aimed at advanced undergraduate and postgraduate students, academic researchers and researchers in the manufacturing industry. It allows readers to integrate the theories and technologies described with their own research works, and to propose new ideas and new methods to improve the theory and application of digital manufacturing science.

Download or read book Digital Manufacturing Technology for Sustainable Anthropometric Apparel written by Norsaadah Zakaria and published by Woodhead Publishing. This book was released on 2022-05-13 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Manufacturing Technology for Sustainable Anthropometric Apparel is a thorough and practical examination of the state-of-the-art in anthropometric apparel manufacturing technology. The scale of the textiles industry, in economic as well as environmental terms, is so significant that new technologies and techniques that deliver improvements are of great global interest. Consumer preferences and government regulations are causing apparel manufacturers to prioritize sustainable practices, and at a time of unprecedented technological evolution and competitive pressure, integrating these measures with other priorities is a key challenge.By combining the expertise of contributors from the worlds of technology change management and technical textiles engineering, this book provides a unique interdisciplinary resource for organizational as well as technical implementation. Newly developed Industry 4.0 technologies are addressed, along with the latest data collection and analysis methods. - Provides practical technical instructions for the implementation of new technologies for 3D body scanning, and anthropometric design and sizing - Explains the latest technical methods for the collection of anthropometric data and examines related ethical issues - Shows how to integrate anthropometric design methodologies into a full smart manufacturing system

Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer Nature. This book was released on 2020-11-10 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers in detail digitally-driven methods for adding materials together to form parts. A conceptual overview of additive manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Well-established and emerging applications such as rapid prototyping, micro-scale manufacturing, medical applications, aerospace manufacturing, rapid tooling and direct digital manufacturing are also discussed. This book provides a comprehensive overview of additive manufacturing technologies as well as relevant supporting technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. Reflects recent developments and trends and adheres to the ASTM, SI and other standards; Includes chapters on topics that span the entire AM value chain, including process selection, software, post-processing, industrial drivers for AM, and more; Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered.

Download or read book Digital Manufacturing and Assembly Systems in Industry 4 0 written by Kaushik Kumar and published by CRC Press. This book was released on 2019-07-03 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, like other industries, is rising to the challenges imposed by aggressive consumer demands and the need for cost-effective processing that delivers quality in the fastest possible time. Fierce competition means that keeping abreast of new developments and applications in technology is essential if companies are to meet demands profitably and keep ahead of competitors. This book investigates the design and management of digital manufacturing and assembly systems for an efficient, flexible, and modular production of customized products using the I40 (industry 4.0)-enabling technologies. This book will also provide case studies covering modeling, simulation, and optimization. eBook includes color figures. Discusses how the advancement of data communication and storage through the Internet of Things (IoT) opens the possibilities of connecting sensors, robots, and devices Sheds light on how the human role in industry is decreasing due to the development of connected manufacturing floors, allowing them to take more control over the manufacturing processes, decisions, and even maintenance Covers the benefits from exploiting digital manufacturing, manufacturing enterprises, and what they expect to achieve Explains the important roles that modeling, simulation, and optimization play Investigates the design and management of digital manufacturing and assembly systems for an efficient, flexible, and modular production of customized products exploiting the I40 (industry 4.0)-enabling technologies

Download or read book Collaborative Design and Planning for Digital Manufacturing written by Lihui Wang and published by Springer Science & Business Media. This book was released on 2009-01-27 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collaborative design has attracted much attention in the research community in recent years. With increasingly decentralized manufacturing systems and processes, more collaborative approaches and systems are needed to support distributed manufacturing operations. "Collaborative Design and Planning for Digital Manufacturing" presents a focused collection of quality chapters on the state-of-the-art research efforts in the area of collaborative design and planning, as well as their practical applications towards digital manufacturing. "Collaborative Design and Planning for Digital Manufacturing" provides both a broad-based review of the key areas of research in digital manufacturing, and an in-depth treatment of particular methodologies and systems, from collaborative design to distributed planning, monitoring and control. Recent development and innovations in this area provide a pool of focused research efforts, relevant to a wide readership from academic researchers to practicing engineers.

Download or read book Advances in Digital Manufacturing Systems written by R. K. Amit and published by Springer Nature. This book was released on 2023-01-01 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains contemporary discussions on technology, business models, and the adoption of digital manufacturing systems. The book's initial chapters cover technological details underpinning the digital manufacturing systems, for example, cyber-physical systems and digital twins. Next, the book discusses how organizations modify their business models using concepts such as servitization and platforms to leverage digital manufacturing. The latter chapters focus on how a country's unique economic and infrastructural context influences digital manufacturing adoption in terms of technology and business models and frameworks to evaluate readiness for digital manufacturing. With perspectives from different continents, the book appeals to academic researchers and industry alike.

Download or read book A Comprehensive Approach to Digital Manufacturing written by Arif Sirinterlikci and published by Springer Nature. This book was released on 2023-04-04 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book draws a comprehensive approach to digital manufacturing through computer-aided design (CAD) and reverse engineering content complemented by basic CNC machining and computer-aided manufacturing (CAM), 3D printing, and additive manufacturing (AM) knowledge. The reader is exposed to a variety of subjects including the history, development, and future of digital manufacturing, a comprehensive look at 3D printing and AM, a comparative study between 3D printing and AM and CNC machining, and computer-aided engineering (CAE) along with 3D scanning. Applications of 3D printing and AM are presented as well as multiple special topics including design for 3D printing and AM (DfAM), costing, sustainability, environmental, safety, and health (EHS) issues. Contemporary subjects such as bio-printing, intellectual property (IP) and engineering ethics, virtual prototyping including augmented, virtual, and mixed reality (AR/VR/MR), and industrial Internet of Things (IIoT) are also covered. Each chapter comes with in-practice exercises and end-of-chapter questions, which can be used as home-works as well as hands-on or software-based laboratory activities. End-of-chapter questions are of three types mainly: review questions which can be answered by reviewing each chapter, research questions which need to be answered by conducting literature reviews and additional research, and discussion questions. In addition, some of the chapters include relevant problems or challenges which may require additional hands-on efforts. Most of the hands-on and practical content is driven by the authors’ previous experiences. The authors also encourage readers to help improve this book and its exercises by contacting them.

Download or read book Digital Manufacturing and Assembly Systems in Industry 4 0 written by Kaushik Kumar and published by CRC Press. This book was released on 2019-07-03 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, like other industries, is rising to the challenges imposed by aggressive consumer demands and the need for cost-effective processing that delivers quality in the fastest possible time. Fierce competition means that keeping abreast of new developments and applications in technology is essential if companies are to meet demands profitably and keep ahead of competitors. This book investigates the design and management of digital manufacturing and assembly systems for an efficient, flexible, and modular production of customized products using the I40 (industry 4.0)-enabling technologies. This book will also provide case studies covering modeling, simulation, and optimization. eBook includes color figures. Discusses how the advancement of data communication and storage through the Internet of Things (IoT) opens the possibilities of connecting sensors, robots, and devices Sheds light on how the human role in industry is decreasing due to the development of connected manufacturing floors, allowing them to take more control over the manufacturing processes, decisions, and even maintenance Covers the benefits from exploiting digital manufacturing, manufacturing enterprises, and what they expect to achieve Explains the important roles that modeling, simulation, and optimization play Investigates the design and management of digital manufacturing and assembly systems for an efficient, flexible, and modular production of customized products exploiting the I40 (industry 4.0)-enabling technologies

Download or read book Emerging Technologies in Digital Manufacturing and Smart Factories written by Hassan, Ahdi and published by IGI Global. This book was released on 2023-12-29 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid digital transformation is forcing the manufacturing industry to drastically alter its current trajectory for future success. The remarkable convergence of digitalization and manufacturing is reshaping industries, ushering in an era known as Industry 5.0. This revolutionary transition has given birth to digital manufacturing and smart factories, heralding a new dawn in the way we produce goods. The amalgamation of artificial intelligence (AI), robotics, the internet of things (IoT), augmented reality (AR), virtual reality (VR), big data analytics, cloud computing, and additive manufacturing stands poised to unlock unprecedented avenues in the realm of production. Practitioners, researchers, dreamers, and pioneers all are beckoned to explore the uncharted territories of digital innovation in manufacturing. Emerging Technologies in Digital Manufacturing and Smart Factories spans domains from mechanical and electrical engineering to computer science, from industrial economics to business strategy, and this book addresses this diverse audience. The book embarks on a comprehensive voyage, unveiling the latest evolutions and nascent trends within digital manufacturing and smart factories. From inception to execution, from design optimization to predictive maintenance, every phase of the manufacturing lifecycle is scrutinized through the lens of cutting-edge technologies. Rather than relying exclusively on the theoretical realm, this book also ventures into the crucible of real-world application, offering practical insights drawn from varied industries, including automotive, aerospace, and pharmaceuticals.

Download or read book Advances in Production Management Systems Towards Smart and Digital Manufacturing written by Bojan Lalic and published by Springer Nature. This book was released on 2020-08-25 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set IFIP AICT 591 and 592 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2020, held in Novi Sad, Serbia, in August/September 2020. The 164 papers presented were carefully reviewed and selected from 199 submissions. They discuss globally pressing issues in smart manufacturing, operations management, supply chain management, and Industry 4.0. The papers are organized in the following topical sections: Part I: advanced modelling, simulation and data analytics in production and supply networks; advanced, digital and smart manufacturing; digital and virtual quality management systems; cloud-manufacturing; cyber-physical production systems and digital twins; IIOT interoperability; supply chain planning and optimization; digital and smart supply chain management; intelligent logistics networks management; artificial intelligence and blockchain technologies in logistics and DSN; novel production planning and control approaches; machine learning and artificial intelligence; connected, smart factories of the future; manufacturing systems engineering: agile, flexible, reconfigurable; digital assistance systems: augmented reality and virtual reality; circular products design and engineering; circular, green, sustainable manufacturing; environmental and social lifecycle assessments; socio-cultural aspects in production systems; data-driven manufacturing and services operations management; product-service systems in DSN; and collaborative design and engineering Part II: the Operator 4.0: new physical and cognitive evolutionary paths; digital transformation approaches in production management; digital transformation for more sustainable supply chains; data-driven applications in smart manufacturing and logistics systems; data-driven services: characteristics, trends and applications; the future of lean thinking and practice; digital lean manufacturing and its emerging practices; new reconfigurable, flexible or agile production systems in the era of industry 4.0; operations management in engineer-to-order manufacturing; production management in food supply chains; gastronomic service system design; product and asset life cycle management in the circular economy; and production ramp-up strategies for product

Download or read book Manufacturing in Digital Industries written by J. Paulo Davim and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-07-06 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Industry can provide the framework for examining the challenges of future production technology. This book describes some of the various aspects that can, and may, influence future manufacturing. Computational intelligence techniques, cyber-physical systems, virtual and cloud-based manufacturing and man-machine interaction are studied and some of the most recent research completed by international experts in industry and academia is considered. Case studies provide practical solutions.

Download or read book Practical Guide to Digital Manufacturing written by Zhuming Bi and published by Springer Nature. This book was released on 2021-05-24 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the subject of digital manufacturing. It provides a practical guide for readers on using computer aided design (CAD), computer aided engineering (CAE) and computer aided manufacturing (CAM) and other computer assistive tools for the design of products, machines, processes and system integrations through the case studies of engineering projects. The book introduces a thorough theoretical foundation and discussion of the historical development, and enabling technologies of digital manufacturing. It also covers a broad range of computer aided tools for a variety of applications including: geometric modelling; assembly modelling; motion simulation; finite element analysis; manufacturing process simulation; machining programming; product data management; and, product lifecycle management. Practical Guide to Digital Manufacturing uses many real-world case studies to illustrate the discussed applications, making it easily readable for undergraduate and graduate students, as well as engineers with the needs of computer-aided design and manufacturing knowledge and skills.

Download or read book Digital Manufacturing written by Asterios Agkathidis and published by BIS Publishers. This book was released on 2011-04-08 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: New title in the succesfull folding architecture series. Ties in with fast growing interest in rapid prototyping.