Download or read book Digital Control Systems written by Constantine H. Houpis and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 1992 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuous-time control-system response characteristics. Linear systems and the sampling process. Discrete systems modeling. Discrete control analysis. Discrete transform analysis (approximations). Principles of signal conversion and measurement. Digital-control-system implementation. Random processes in digital control systems. Finite word lenght and compensator structure. Cascade compensation-digitization (DIG) technique. Cascade compensation - direct (DIR) technique. Feedback compensation. Discrete state-variable model. State-space design methods. Discrete quantitative feedback technique. Modern discrete control theory. Discrete optimal control. Discrete estimation and stochastic control. Fourier transform. Convolution. Pade approximation. Power series. Computer-Aided-Design (CAD) programs for control. Matrix manipulations. Signal flow graphs. w-Transformation characteristics. Number representations. Theory of probability. Discrete QFT design processes.
Download or read book Digital Control Systems written by Constantine Harry Houpis and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital control systems written by and published by . This book was released on 1985 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Control Systems theory Hardware Software written by Constantine H. Houpis and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 1985 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Control Systems written by Ioan Doré Landau and published by Springer Science & Business Media. This book was released on 2007-05-11 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The extraordinary development of digital computers (microprocessors, microcontrollers) and their extensive use in control systems in all fields of applications has brought about important changes in the design of control systems. Their performance and their low cost make them suitable for use in control systems of various kinds which demand far better capabilities and performances than those provided by analog controllers. However, in order really to take advantage of the capabilities of microprocessors, it is not enough to reproduce the behavior of analog (PID) controllers. One needs to implement specific and high-performance model based control techniques developed for computer-controlled systems (techniques that have been extensively tested in practice). In this context identification of a plant dynamic model from data is a fundamental step in the design of the control system. The book takes into account the fact that the association of books with software and on-line material is radically changing the teaching methods of the control discipline. Despite its interactive character, computer-aided control design software requires the understanding of a number of concepts in order to be used efficiently. The use of software for illustrating the various concepts and algorithms helps understanding and rapidly gives a feeling of the various phenomena.
Download or read book Solutions Manual to Accompany Digital Control Systems theory Hardware Software written by Constantine H. Houpis and published by . This book was released on 1985 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Direct Digital Control of Building Systems written by H. Michael Newman and published by John Wiley & Sons. This book was released on 1994 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: It emphasizes throughout the high performance, reliability, and reduced cost of modern digital sensors, control devices, microprocessors, computer memory, and other electronic components.
Download or read book Embedded Digital Control with Microcontrollers written by Cem Unsalan and published by John Wiley & Sons. This book was released on 2021-04-06 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: EMBEDDED DIGITAL CONTROL WITH MICROCONTROLLERS Explore a concise and practical introduction to implementation methods and the theory of digital control systems on microcontrollers Embedded Digital Control with Microcontrollers delivers expert instruction in digital control system implementation techniques on the widely used ARM Cortex-M microcontroller. The accomplished authors present the included information in three phases. First, they describe how to implement prototype digital control systems via the Python programming language in order to help the reader better understand theoretical digital control concepts. Second, the book offers readers direction on using the C programming language to implement digital control systems on actual microcontrollers. This will allow readers to solve real-life problems involving digital control, robotics, and mechatronics. Finally, readers will learn how to merge the theoretical and practical issues discussed in the book by implementing digital control systems in real-life applications. Throughout the book, the application of digital control systems using the Python programming language ensures the reader can apply the theory contained within. Readers will also benefit from the inclusion of: A thorough introduction to the hardware used in the book, including STM32 Nucleo Development Boards and motor drive expansion boards An exploration of the software used in the book, including Python, MicroPython, and Mbed Practical discussions of digital control basics, including discrete-time signals, discrete-time systems, linear and time-invariant systems, and constant coefficient difference equations An examination of how to represent a continuous-time system in digital form, including analog-to-digital conversion and digital-to-analog conversion Perfect for undergraduate students in electrical engineering, Embedded Digital Control with Microcontrollers will also earn a place in the libraries of professional engineers and hobbyists working on digital control and robotics systems seeking a one-stop reference for digital control systems on microcontrollers.
Download or read book Modern Digital Control Systems written by Raymond G. Jacquot and published by Routledge. This book was released on 2019-01-22 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents traditional methods and current techniques of incorporating the computer into closed-loop dynamic systems control, combining conventional transfer function design and state variable concepts. Digital Control Designer - an award-winning software program which permits the solution of highly complex problems - is available on the CR
Download or read book Modern Digital Control Sys 2e written by Raymond G. Jacquot and published by CRC PressI Llc. This book was released on 1995 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents traditional methods and current techniques of incorporating the computer into closed-loop dynamic systems control, combining conventional transfer function design and state variable concepts. Digital Control Designer - an award-winning software program which permits the solution of highly complex problems - is included (3.5 IBM-compatible disk). This edition: supplies new coverage of the Ragazzini technique; describes digital filtering, including Butterworth prototype filters; and more. A solutions manual is included for instructors.
Download or read book Digital Control Systems written by R. Isermann and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: The great advances made in large-scale integration of semiconductors, the resulting cost-effective digital processors and data storage devi ces, and the development of suitable programming techniques are all having increasing influence on the techniques of measurement and con trol and on automation in general. The application of digital techni ques to process automation started in about 1960 when the first process computer was installed. From about 1970 computers have become standard equipment for the automation of industrial processes, connected on-line in open or closed loop. The annual increase of installed process compu ters in the last decade was about 20- 30 %. The cost of hardware has shown a tendency to decrease, whereas the relative cost of user soft ware has tended to increase. Because of the relatively high total cost, the first phase of digital computer application to process control is characterized by the centralization of many functions in a single (though sometimes in several) process computer. Such centralization does not permit full utilization of the many advantages of digital signal processing and rapid economic pay-off as analog back-up systems or parallel standby computers must often be provided to cover possible breakdowns in the central computer. In 1971 the first microprocessors were marketed which, together with large-scale integrated semiconductor memory units and input/output mo dules, can be assembled into more cost-effective process microcompu ters.
Download or read book Modern Control System Theory written by M. Gopal and published by New Age International. This book was released on 1993 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: About the book... The book provides an integrated treatment of continuous-time and discrete-time systems for two courses at postgraduate level, or one course at undergraduate and one course at postgraduate level. It covers mainly two areas of modern control theory, namely; system theory, and multivariable and optimal control. The coverage of the former is quite exhaustive while that of latter is adequate with significant provision of the necessary topics that enables a research student to comprehend various technical papers. The stress is on interdisciplinary nature of the subject. Practical control problems from various engineering disciplines have been drawn to illustrate the potential concepts. Most of the theoretical results have been presented in a manner suitable for digital computer programming along with the necessary algorithms for numerical computations.
Download or read book Industrial Digital Control Systems written by K. Warwick and published by IET. This book was released on 1988 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes: Digital signals and systems. Digital controllers for process control applications. Design of digital controllers. Control of time delay systems. State-space concepts. System identification. Introduction to discrete optimal control. Multivariable control. Adaptive control. Computer aided design for industrial control systems. Reliability and redundancy in microprocessor controllers. Software and hardware aspects of industrial controller implementations. Application of distributed digital control algorithms to power stations. An expert system for process control.
Download or read book Introduction to Digital Control written by Biswanath Samanta and published by Springer. This book was released on 2024-12-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook presents an integrated approach to digital (discrete-time) control systems covering analysis, design, simulation, and real-time implementation through relevant hardware and software platforms. Topics related to discrete-time control systems include z-transform, inverse z-transform, sampling and reconstruction, open- and closed-loop system characteristics, steady-state accuracy for different system types and input functions, stability analysis in z-domain-Jury’s test, bilinear transformation from z- to w-domain, stability analysis in w-domain- Routh-Hurwitz criterion, root locus techniques in z-domain, frequency domain analysis in w-domain, control system specifications in time- and frequency- domains, design of controllers – PI, PD, PID, phase-lag, phase-lead, phase-lag-lead using time- and frequency-domain specifications, state-space methods- controllability and observability, pole placement controllers, design of observers (estimators) - full-order prediction, reduced-order, and current observers, system identification, optimal control- linear quadratic regulator (LQR), linear quadratic Gaussian (LQG) estimator (Kalman filter), implementation of controllers, and laboratory experiments for validation of analysis and design techniques on real laboratory scale hardware modules. Both single-input single-output (SISO) and multi-input multi-output (MIMO) systems are covered. Software platform of Matlab/Simulnik is used for analysis, design, and simulation and hardware/software platforms of National Instruments (NI)/LabVIEW are used for implementation and validation of analysis and design of digital control systems. Demonstrating the use of an integrated approach to cover interdisciplinary topics of digital control, emphasizing theoretical background, validation through analysis, simulation, and implementation in physical laboratory experiments, the book is ideal for students of engineering and applied science across in a range of concentrations.
Download or read book Digital Control Systems written by Constantine H Houpis and published by CRC Press. This book was released on 2016-11-15 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely revised and updated, written to be understandable for students, and practical in its coverage, this new edition features a range of new engineering applications, such as control of unmanned aerial vehicles (UAVs), wind turbine energy systems, and robotic systems. MATLAB and Simulink integration is found throughout, along with math presented in an understandable way for student readers. Building on basic controls concepts, the book guides readers through the analysis, design, and implementation procedures needed in today's industry.
Download or read book Control System Design Guide written by George Ellis and published by Academic Press. This book was released on 2012-12-02 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a practical approach to control techniques. The author covers background material on analog controllers, digital controllers, and filters. Commonly used controllers are presented. Extended use of PSpice (a popular circuit simulation program) is used in problem solving. The book is also documented with 50 computer programs that circuit designers can use. Explains integration of control systems with a personal computer Compares numerous control algorithms in digital and analog form Details the use of SPICE in problem solving Presents modeling concepts for linear and nonlinear systems Examines commonly used controllers
Download or read book Control System Design Guide written by George Ellis and published by Butterworth-Heinemann. This book was released on 2012-05-15 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title will help engineers to apply control theory to practical systems using their PC. It provides an intuitive approach to controls, avoiding unecessary math and emphasising key concepts with control system models
