Download or read book Digital Control Systems written by Rolf Isermann and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: The great advances made in large-scale integration of semiconductors and the resulting cost-effective digital processors and data storage devices determine the present development of automation. The application of digital techniques to process automation started in about 1960, when the first process computer was installed. From about 1970 process computers with cathodic ray tube display have become standard equipment for larger automation systems. Until about 1980 the annual increase of process computers was about 20 to 30%. The cost of hardware has already then shown a tendency to decrease, whereas the relative cost of user software has tended to increase. Because of the high total cost the first phase of digital process automation is characterized by the centralization of many functions in a single (though sometimes in several) process computer. Application was mainly restricted to medium and large processes. Because of the far-reaching consequences of a breakdown in the central computer parallel standby computers or parallel back-up systems had to be provided. This meant a substantial increase in cost. The tendency to overload the capacity and software problems caused further difficulties. In 1971 the first microprocessors were marketed which, together with large-scale integrated semiconductor memory units and input/output modules, can be assem bled into cost-effective microcomputers. These microcomputers differ from process computers in fewer but higher integrated modules and in the adaptability of their hardware and software to specialized, less comprehensive tasks.
Download or read book Digital Control Systems written by Rolf Isermann and published by . This book was released on 1991 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Control Systems Stochastic control multivariable control adaptive control applications written by Rolf Isermann and published by . This book was released on 1989 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Control Systems written by R. Isermann and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: The great advances made in large-scale integration of semiconductors, the resulting cost-effective digital processors and data storage devi ces, and the development of suitable programming techniques are all having increasing influence on the techniques of measurement and con trol and on automation in general. The application of digital techni ques to process automation started in about 1960 when the first process computer was installed. From about 1970 computers have become standard equipment for the automation of industrial processes, connected on-line in open or closed loop. The annual increase of installed process compu ters in the last decade was about 20- 30 %. The cost of hardware has shown a tendency to decrease, whereas the relative cost of user soft ware has tended to increase. Because of the relatively high total cost, the first phase of digital computer application to process control is characterized by the centralization of many functions in a single (though sometimes in several) process computer. Such centralization does not permit full utilization of the many advantages of digital signal processing and rapid economic pay-off as analog back-up systems or parallel standby computers must often be provided to cover possible breakdowns in the central computer. In 1971 the first microprocessors were marketed which, together with large-scale integrated semiconductor memory units and input/output mo dules, can be assembled into more cost-effective process microcompu ters.
Download or read book Measurement and Control in Food Processing written by Manabendra Bhuyan and published by CRC Press. This book was released on 2006-08-15 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to raise awareness of the current techniques of measurement and control, this book will aid in the design of instruments and control schemes, explain the applicability of these tools to enhance quality and productivity, and educate students preparing to enter the food industry. Divided into five major chapters, the book lays a solid foundation for understanding the role of transducers and controllers, covers the most recent developments and applications in measurement techniques, and explains non-traditional methods such as electronic noses, biosensors, fuzzy logic control, and microcomputer-based monitoring.
Download or read book Two Degree of Freedom Control Systems written by László Kevickzy and published by Academic Press. This book was released on 2015-06-18 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the most important issues from classical and robust control, deterministic and stochastic control, system identification, and adaptive and iterative control strategies. It covers most of the known control system methodologies using a new base, the Youla parameterization (YP). This concept is introduced and extended for TDOF control loops. The Keviczky-Banyasz parameterization (KP) method developed for closed loop systems is also presented. The book is valuable for those who want to see through the jungle of available methods by using a unified approach, and for those who want to prepare computer code with a given algorithm. - Provides comprehensive coverage of the most widely used control system methodologies - The first book to use the Youla parameterization (YP) as a common base for comparison and algorithm development - Compares YP and Keviczky-Banyasz (KB) parameterization to help you write your own computer algorithms
Download or read book Case Studies in Control written by Stanko Strmčnik and published by Springer Science & Business Media. This book was released on 2013-06-12 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Case Studies in Control presents a framework to facilitate the use of advanced control concepts in real systems based on two decades of research and over 150 successful applications for industrial end-users from various backgrounds. In successive parts the text approaches the problem of putting the theory to work from both ends, theoretical and practical. The first part begins with a stress on solid control theory and the shaping of that theory to solve particular instances of practical problems. It emphasizes the need to establish by experiment whether a model-derived solution will perform properly in reality. The second part focuses on real industrial applications based on the needs and requirements of end-users. Here, the engineering approach is dominant but with theoretical input of varying degree depending on the particular process involved. Following the illustrations of the progress that can be made from either extreme of the well-known theory–practice divide, the text proceeds to a third part related to the development of tools that enable simpler use of advanced methods, a need only partially met by available commercial products. Each case study represents a self-contained unit that shows an experimental application of a particular method, a practical solution to an industrial problem or a toolkit that makes control design and implementation easier or more efficient. Among the applications presented are: wastewater treatment; manufacturing of electrical motors ; temperature control of blow moulding; burn-protective garments quality assessment; and rapid prototyping. Written by contributors with a considerable record of industrially-applied research, Case Studies in Control will encourage interaction between industrial practitioners and academic researchers and be of benefit to both, helping to make theory realistic and practical implementation more thorough and efficacious. Advances in Industrial Control aims to report and encourage the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.
Download or read book Computer Controlled Systems written by Karl J Åström and published by Courier Corporation. This book was released on 2013-06-13 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume features computational tools that can be applied directly and are explained with simple calculations, plus an emphasis on control system principles and ideas. Includes worked examples, MATLAB macros, and solutions manual.
Download or read book Springer Handbook of Automation written by Shimon Y. Nof and published by Springer Science & Business Media. This book was released on 2009-07-16 with total page 1841 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook incorporates new developments in automation. It also presents a widespread and well-structured conglomeration of new emerging application areas, such as medical systems and health, transportation, security and maintenance, service, construction and retail as well as production or logistics. The handbook is not only an ideal resource for automation experts but also for people new to this expanding field.
Download or read book Digital Computer Applications to Process Control written by R. Isermann and published by Elsevier. This book was released on 2014-05-20 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Computer Applications to Process Control presents the developments in the application of digital computers to the control of technical processes. This book discusses the control principles and includes as well direct feedback and feed forward control as monitoring and optimization of technical processes. Organized into five parts encompassing 77 chapters, this book begins with an overview of the two categories of microprocessor systems. This text then discusses the concept of a sensor controlled robot that adapts to any task, assures product quality, and eliminates machine tending labor. Other chapters consider the ergonomic adaptation of the human operator's working conditions to his abilities. This book discusses as well the self-tuning regulator for liquid level in the acetic acid evaporator and its actual performance in production. The final chapter deals with algebraic method for deadbeat control of multivariable linear time-invariant continuous systems. This book is a valuable resource for electrical and control engineers.
Download or read book Commande des proc d s 3e ed written by CORRIOU Jean-Pierre and published by Lavoisier. This book was released on 2012-09-11 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cette troisième édition a été enrichie par l'introduction de nouveaux exemples et de méthodes récentes. En un volume unique, le livre propose une synthèse progressive et approfondie des principales méthodes de commande exposées sous forme théorique et illustrées sur des exemples variés de procédés : réacteurs chimiques, biologiques, de polymérisation, craqueur catalytique, colonne de distillation. Les six parties couvrent la modélisation et la commande continue monovariable, la commande multivariable par fonction de transfert, l'identification et la commande en temps discret, la commande optimale et prédictive multivariable, la commande non linéaire et les observateurs d'état. Cet ouvrage s'adresse aussi bien aux étudiants de 2e et 3e cycle qu'aux chercheurs, enseignants et ingénieurs.
Download or read book Instrument Engineers Handbook Volume Two written by Bela G. Liptak and published by CRC Press. This book was released on 2018-10-08 with total page 2460 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest update to Bela Liptak's acclaimed "bible" of instrument engineering is now available. Retaining the format that made the previous editions bestsellers in their own right, the fourth edition of Process Control and Optimization continues the tradition of providing quick and easy access to highly practical information. The authors are practicing engineers, not theoretical people from academia, and their from-the-trenches advice has been repeatedly tested in real-life applications. Expanded coverage includes descriptions of overseas manufacturer's products and concepts, model-based optimization in control theory, new major inventions and innovations in control valves, and a full chapter devoted to safety. With more than 2000 graphs, figures, and tables, this all-inclusive encyclopedic volume replaces an entire library with one authoritative reference. The fourth edition brings the content of the previous editions completely up to date, incorporates the developments of the last decade, and broadens the horizons of the work from an American to a global perspective. Béla G. Lipták speaks on Post-Oil Energy Technology on the AT&T Tech Channel.
Download or read book Analysis and Decision Making in Uncertain Systems written by Zdzislaw Bubnicki and published by Springer Science & Business Media. This book was released on 2004-01-09 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unified and systematic description of analysis and decision problems within a wide class of uncertain systems, described by traditional mathematical methods and by relational knowledge representations. Prof. Bubnicki takes a unique approach to stability and stabilization of uncertain systems.
Download or read book Advances in Engineering Research and Application written by Kai-Uwe Sattler and published by Springer Nature. This book was released on 2019-11-30 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume gathers the outcomes of the International Conference on Engineering Research and Applications (ICERA 2019), which was held at Thai Nguyen University of Technology, Vietnam, on December 1–2, 2019 and provided an international forum for disseminating the latest theories and practices in engineering research and applications. The conference focused on original research work in a broad range of areas, including Mechanical Engineering, Materials and Mechanics of Materials, Mechatronics and Micromechatronics, Automotive Engineering, Electrical and Electronics Engineering, and Information and Communication Technology. By sharing the latest advances in these fields, the book will help academics and professionals alike to revisit their thinking on sustainable development.
Download or read book CONTROL SYSTEMS ROBOTICS AND AUTOMATION Volume I written by Heinz Unbehauen and published by EOLSS Publications. This book was released on 2009-10-11 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Control Systems, Robotics, and Automation is a component of the global Encyclopedia of Life Support Systems EOLSS, which is an integrated compendium of twenty one Encyclopedias. This 22-volume set contains 240 chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It is the only publication of its kind carrying state-of-the-art knowledge in the fields of Control Systems, Robotics, and Automation and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.
Download or read book Adaptronics and Smart Structures written by Hartmut Janocha and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adaptronics is the term encompassing technical fields that have become known internationally under the names "smart materials", "intelligent structures", and "smart structures". Adaptronics contributes to the optimisation of systems and products. It bridges the gap between material and system or product, and incorporates the search for multi-functional materials and elements and their integration in systems or structures. The authors of this book have taken on the task of displaying the current state of the art in this fascinating field. The system components, actuators, sensors and controllers, technical fundamentals, materials, design rules and practical solutions are all described. Selected sample applications are also presented and current development trends are demonstrated.
Download or read book Nonlinear and Adaptive Control with Applications written by Alessandro Astolfi and published by Springer Science & Business Media. This book was released on 2007-12-06 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors here provide a detailed treatment of the design of robust adaptive controllers for nonlinear systems with uncertainties. They employ a new tool based on the ideas of system immersion and manifold invariance. New algorithms are delivered for the construction of robust asymptotically-stabilizing and adaptive control laws for nonlinear systems. The methods proposed lead to modular schemes that are easier to tune than their counterparts obtained from Lyapunov redesign.
