Download or read book Digital Control Systems written by Ioan Doré Landau and published by Springer Science & Business Media. This book was released on 2007-05-11 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The extraordinary development of digital computers (microprocessors, microcontrollers) and their extensive use in control systems in all fields of applications has brought about important changes in the design of control systems. Their performance and their low cost make them suitable for use in control systems of various kinds which demand far better capabilities and performances than those provided by analog controllers. However, in order really to take advantage of the capabilities of microprocessors, it is not enough to reproduce the behavior of analog (PID) controllers. One needs to implement specific and high-performance model based control techniques developed for computer-controlled systems (techniques that have been extensively tested in practice). In this context identification of a plant dynamic model from data is a fundamental step in the design of the control system. The book takes into account the fact that the association of books with software and on-line material is radically changing the teaching methods of the control discipline. Despite its interactive character, computer-aided control design software requires the understanding of a number of concepts in order to be used efficiently. The use of software for illustrating the various concepts and algorithms helps understanding and rapidly gives a feeling of the various phenomena.

Download or read book Digital Control Systems written by R. Isermann and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: The great advances made in large-scale integration of semiconductors, the resulting cost-effective digital processors and data storage devi ces, and the development of suitable programming techniques are all having increasing influence on the techniques of measurement and con trol and on automation in general. The application of digital techni ques to process automation started in about 1960 when the first process computer was installed. From about 1970 computers have become standard equipment for the automation of industrial processes, connected on-line in open or closed loop. The annual increase of installed process compu ters in the last decade was about 20- 30 %. The cost of hardware has shown a tendency to decrease, whereas the relative cost of user soft ware has tended to increase. Because of the relatively high total cost, the first phase of digital computer application to process control is characterized by the centralization of many functions in a single (though sometimes in several) process computer. Such centralization does not permit full utilization of the many advantages of digital signal processing and rapid economic pay-off as analog back-up systems or parallel standby computers must often be provided to cover possible breakdowns in the central computer. In 1971 the first microprocessors were marketed which, together with large-scale integrated semiconductor memory units and input/output mo dules, can be assembled into more cost-effective process microcompu ters.

Download or read book Digital Control Engineering written by M. Sami Fadali and published by Academic Press. This book was released on 2012-09-06 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital controllers are part of nearly all modern personal, industrial, and transportation systems. Every senior or graduate student of electrical, chemical or mechanical engineering should therefore be familiar with the basic theory of digital controllers. This new text covers the fundamental principles and applications of digital control engineering, with emphasis on engineering design. Fadali and Visioli cover analysis and design of digitally controlled systems and describe applications of digital controls in a wide range of fields. With worked examples and Matlab applications in every chapter and many end-of-chapter assignments, this text provides both theory and practice for those coming to digital control engineering for the first time, whether as a student or practicing engineer. Extensive Use of computational tools: Matlab sections at end of each chapter show how to implement concepts from the chapter Frees the student from the drudgery of mundane calculations and allows him to consider more subtle aspects of control system analysis and design An engineering approach to digital controls: emphasis throughout the book is on design of control systems. Mathematics is used to help explain concepts, but throughout the text discussion is tied to design and implementation. For example coverage of analog controls in chapter 5 is not simply a review, but is used to show how analog control systems map to digital control systems Review of Background Material: contains review material to aid understanding of digital control analysis and design. Examples include discussion of discrete-time systems in time domain and frequency domain (reviewed from linear systems course) and root locus design in s-domain and z-domain (reviewed from feedback control course) Inclusion of Advanced Topics In addition to the basic topics required for a one semester senior/graduate class, the text includes some advanced material to make it suitable for an introductory graduate level class or for two quarters at the senior/graduate level. Examples of optional topics are state-space methods, which may receive brief coverage in a one semester course, and nonlinear discrete-time systems Minimal Mathematics Prerequisites The mathematics background required for understanding most of the book is based on what can be reasonably expected from the average electrical, chemical or mechanical engineering senior. This background includes three semesters of calculus, differential equations and basic linear algebra. Some texts on digital control require more

Download or read book Digital Control Systems written by Benjamin C. Kuo and published by . This book was released on 2007 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analog and Digital Control Systems written by Ramakant A. Gayakwad and published by Prentice Hall. This book was released on 1988 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Digital Control System Analysis and Design written by Charles L. Phillips and published by . This book was released on 1990 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Digital Control Systems written by Anastasia Veloni and published by CRC Press. This book was released on 2017-08-07 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to provide a collection of solved problems on control systems, with an emphasis on practical problems. System functionality is described, the modeling process is explained, the problem solution is introduced, and the derived results are discussed. Each chapter ends with a discussion on applying MATLAB®, LabVIEW, and/or Comprehensive Control to the previously introduced concepts. The aim of the book is to help an average reader understand the concepts of control systems through problems and applications. The solutions are based directly on math formulas given in extensive tables throughout the text.

Download or read book Embedded Digital Control with Microcontrollers written by Cem Unsalan and published by John Wiley & Sons. This book was released on 2021-04-06 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: EMBEDDED DIGITAL CONTROL WITH MICROCONTROLLERS Explore a concise and practical introduction to implementation methods and the theory of digital control systems on microcontrollers Embedded Digital Control with Microcontrollers delivers expert instruction in digital control system implementation techniques on the widely used ARM Cortex-M microcontroller. The accomplished authors present the included information in three phases. First, they describe how to implement prototype digital control systems via the Python programming language in order to help the reader better understand theoretical digital control concepts. Second, the book offers readers direction on using the C programming language to implement digital control systems on actual microcontrollers. This will allow readers to solve real-life problems involving digital control, robotics, and mechatronics. Finally, readers will learn how to merge the theoretical and practical issues discussed in the book by implementing digital control systems in real-life applications. Throughout the book, the application of digital control systems using the Python programming language ensures the reader can apply the theory contained within. Readers will also benefit from the inclusion of: A thorough introduction to the hardware used in the book, including STM32 Nucleo Development Boards and motor drive expansion boards An exploration of the software used in the book, including Python, MicroPython, and Mbed Practical discussions of digital control basics, including discrete-time signals, discrete-time systems, linear and time-invariant systems, and constant coefficient difference equations An examination of how to represent a continuous-time system in digital form, including analog-to-digital conversion and digital-to-analog conversion Perfect for undergraduate students in electrical engineering, Embedded Digital Control with Microcontrollers will also earn a place in the libraries of professional engineers and hobbyists working on digital control and robotics systems seeking a one-stop reference for digital control systems on microcontrollers.

Download or read book Applied Digital Control written by James R. Leigh and published by Prentice Hall. This book was released on 1985 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.

Download or read book Analog and Digital Control System Design written by Chi-Tsong Chen and published by OUP USA. This book was released on 2006-02-24 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text's contemporary approach focuses on the concepts of linear control systems, rather than computational mechanics. Straightforward coverage includes an integrated treatment of both classical and modern control system methods. The text emphasizes design with discussions of problem formulation, design criteria, physical constraints, several design methods, and implementation of compensators. Discussions of topics not found in other texts—such as pole placement, model matching and robust tracking—add to the text's cutting-edge presentation. Students will appreciate the applications and discussions of practical aspects, including the leading problem in developing block diagrams, noise, disturbances, and plant perturbations. State feedback and state estimators are designed using state variable equations and transfer functions, offering a comparison of the two approaches. The incorporation of MATLAB throughout the text helps students to avoid time-consuming computation and concentrate on control system design and analysis.

Download or read book Direct Digital Control Systems written by Mary S. Nardone and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct Digital Control Systems: Application · Commissioning offers an insightful examination of the critical role of the DDC system in the commissioning process. Included is solid coverage of microprocessor-based control systems combined with the protocols and procedures needed to effectively integrate DDC system validation into systems commissioning. This field handbook is an everyday reference on Direct Digital Control for commissioning personnel. Whether designer, contractor, air balancer, technician, vendor, commissioning agent, owner, operator or student, increasing one's knowledge of DDC control systems will directly improve project performance.

Download or read book Digital Control Systems theory Hardware Software written by Constantine H. Houpis and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 1985 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modern Digital Control Systems written by Raymond G. Jacquot and published by Routledge. This book was released on 2019-01-22 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents traditional methods and current techniques of incorporating the computer into closed-loop dynamic systems control, combining conventional transfer function design and state variable concepts. Digital Control Designer - an award-winning software program which permits the solution of highly complex problems - is available on the CR

Download or read book Digital Control of Dynamic Systems written by Gene F. Franklin and published by Prentice Hall. This book was released on 1998 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work discusses the use of digital computers in the real-time control of dynamic systems using both classical and modern control methods. Two new chapters offer a review of feedback control systems and an overview of digital control systems. MATLAB statements and problems have been more thoroughly and carefully integrated throughout the text to offer students a more complete design picture.

Download or read book Industrial Digital Control Systems written by K. Warwick and published by IET. This book was released on 1988 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes: Digital signals and systems. Digital controllers for process control applications. Design of digital controllers. Control of time delay systems. State-space concepts. System identification. Introduction to discrete optimal control. Multivariable control. Adaptive control. Computer aided design for industrial control systems. Reliability and redundancy in microprocessor controllers. Software and hardware aspects of industrial controller implementations. Application of distributed digital control algorithms to power stations. An expert system for process control.

Download or read book CONTROL SYSTEMS ROBOTICS AND AUTOMATION Volume II written by Heinz Unbehauen and published by EOLSS Publications. This book was released on 2009-10-11 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Control Systems, Robotics, and Automation is a component of the global Encyclopedia of Life Support Systems EOLSS, which is an integrated compendium of twenty one Encyclopedias. This 22-volume set contains 240 chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It is the only publication of its kind carrying state-of-the-art knowledge in the fields of Control Systems, Robotics, and Automation and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.

Download or read book Digital Control Applications Illustrated with MATLAB written by Hemchandra Madhusudan Shertukde and published by CRC Press. This book was released on 2015-02-13 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Control Applications Illustrated with MATLAB covers the modeling, analysis, and design of linear discrete control systems. Illustrating all topics using the micro-computer implementation of digital controllers aided by MATLAB, Simulink, and FEEDBACK