Download or read book Diffractive Optics for Thin Film Silicon Solar Cells written by Christian Stefano Schuster and published by Springer. This book was released on 2016-09-26 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis introduces a figure of merit for light trapping with photonic nanostructures and shows how different light trapping methods compare, irrespective of material, absorber thickness or type of nanostructure. It provides an overview of the essential aspects of light trapping, offering a solid basis for future designs. Light trapping with photonic nanostructures is a powerful method of increasing the absorption in thin film solar cells. Many light trapping methods have been studied, but to date there has been no comprehensive figure of merit to compare these different methods quantitatively. This comparison allows us to establish important design rules for highly performing structures; one such rule is the structuring of the absorber layer from both sides, for which the authors introduce a novel and simple layer-transfer technique. A closely related issue is the question of plasmonic vs. dielectric nanostructures; the authors present an experimental demonstration, aided by a detailed theoretical assessment, highlighting the importance of considering the multipass nature of light trapping in a thin film, which is an essential effect that has been neglected in previous work and which allows us to quantify the parasitic losses.
Download or read book Optical Modeling and Simulation of Thin Film Photovoltaic Devices written by Janez Krc and published by CRC Press. This book was released on 2016-04-19 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: In wafer-based and thin-film photovoltaic (PV) devices, the management of light is a crucial aspect of optimization since trapping sunlight in active parts of PV devices is essential for efficient energy conversions. Optical modeling and simulation enable efficient analysis and optimization of the optical situation in optoelectronic and PV devices.
Download or read book Nanotechnology for Photovoltaics written by Loucas Tsakalakos and published by CRC Press. This book was released on 2010-03-25 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current concerns regarding greenhouse gas-related environmental effects, energy security, and the rising costs of fossil fuel-based energy has renewed interest in solar energy in general and photovotaics in particular. Exploring state-of-the-art developments from a practical point of view, Nanotechnology for Photovoltaics examines issues in increas
Download or read book Photon Management in Solar Cells written by Ralf B. Wehrspohn and published by John Wiley & Sons. This book was released on 2016-03-09 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by renowned experts in the field of photon management in solar cells, this one-stop reference gives an introduction to the physics of light management in solar cells, and discusses the different concepts and methods of applying photon management. The authors cover the physics, principles, concepts, technologies, and methods used, explaining how to increase the efficiency of solar cells by splitting or modifying the solar spectrum before they absorb the sunlight. In so doing, they present novel concepts and materials allowing for the cheaper, more flexible manufacture of solar cells and systems. For educational purposes, the authors have split the reasons for photon management into spatial and spectral light management. Bridging the gap between the photonics and the photovoltaics communities, this is an invaluable reference for materials scientists, physicists in industry, experimental physicists, lecturers in physics, Ph.D. students in physics and material sciences, engineers in power technology, applied and surface physicists.
Download or read book Light Trapping with Plasmonic Back Contacts in Thin Film Silicon Solar Cells written by Ulrich Wilhelm Paetzold and published by Forschungszentrum Jülich. This book was released on 2013 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solar Power Generation written by P. Jayarama Reddy and published by CRC Press. This book was released on 2012-03-22 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a global perspective of the current state of affairs in the field of solar power engineering. In four parts, this well-researched volume informs about: Established solar PV (photovoltaic) technologies Third-generation PV technologies based on new materials with potential for low-cost large-scale production Solar cell technology based on new (third-generation) concepts, such as quantum dot solar cells and nano wire solar cells using silicon and compound semiconductors Economic implications and effects, as well as policies and incentives in various countries of the world involved with solar energy implementation In addition to discussing manufacturing facts and implementation issues, this book emphasizes the implications of policy measures in countries with good PV activity, such as Japan, China, India, Germany, Spain, France, Italy, the United States, and Canada. This volume is intended as a reference for a global audience of advanced students and R&D and industry professionals, as well as investors and policy-makers with fundamental knowledge of photovoltaic technology.
Download or read book Advances in Silicon Solar Cells written by Shadia Ikhmayies and published by Springer. This book was released on 2018-01-10 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a review of all types of silicon solar cells. The scope includes monocrocrystalline Si solar cells, polycrystalline and amorphous thin-film silicon solar cells, and tandem solar cells. Production, treatment and development of these devices are reviewed. Limitations of these devices, design optimization, testing and fabrication methods are covered. In addition, current status and future prospects for the further development of silicon solar cells are addressed. Special emphasis is given to methods of attaining high efficiency and thereby cost-effective solar power. The aim of the book is to provide the reader with a complete overview about the recent advances in the structure and technology of all generations of silicon solar cells.
Download or read book Optoelectronics written by Mike Haidar Shahine and published by BoD – Books on Demand. This book was released on 2021-06-23 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents a unique collection of the latest developments in the rapidly developing world of optoelectronics. The contributing authors to this book are a group of internationally distinguished researchers. This book consists of a collection of chapters divided into two sections, with the first section covering new applications and the second section covering materials and crystal structures topics to support future generations of optoelectronic devices and open the door for future, more demanding applications. This collection of chapters will be of considerable interest to scientists, engineers, physicists, and technologists working in research and development in the fields of optoelectronics and photonics, as well as to young researchers who are at the beginning of their career.
Download or read book Crystalline Silicon Solar Cells written by Saleem Hussain Zaidi and published by Springer Nature. This book was released on 2021-08-02 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on crystalline silicon solar cell science and technology. It is written from the perspective of an experimentalist with extensive hands-on experience in modeling, fabrication, and characterization. A practical approach to solar cell fabrication is presented in terms of its three components: materials, electrical, and optical. The materials section describes wafer processing methods including saw damage removal, texturing, diffusion, and surface passivation. The electrical section focuses on formation of ohmic contacts on n and p-doped surfaces. The optical section illustrates light interaction with textured silicon surfaces in terms of geometrical, diffractive and physical optics, transmission, and surface photovoltage (SPV) spectroscopy. A final chapter analyzes performance of solar cells, fabricated with a wide range of process parameters. A brief economic analysis on the merits of crystalline silicon-based photovoltaic technology as a cottage industry is also included./div This professional reference will be an important resource for practicing engineers and technicians working with solar cell and PV manufacturing and renewable energy technologies, as well as upper-level engineering and material science students. Presents a practical approach to solar cell fabrication, and characterization; Offers modular methodology with detailed equipment and process parameters supported by experimental results; Includes processing diagrams and tables for 16% efficient solar cell fabrication.
Download or read book Air Pollution Control and Design written by Pen-Chi Chiang and published by Springer Nature. This book was released on 2022-10-03 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses specifically on the environmental issues related to the air pollution control and design. It is divided into four parts: (1) Fundamentals of air pollution control, (2) fundamentals of energy utilization, (3) gaseous control and design, and (4) particulate control and design, each consisting of four to six chapters. The topics covered in this book not only introduce the basic concepts of air pollution control and design but also address the fundamentals of energy utilization in the context of good engineering practice and policy instruments. It also features several innovative technologies and integrated methodologies relating to gaseous and particulate matter control and design. To facilitate technology integration and meet the need for comprehensive information on sustainable development, the book discusses a wide range of areas concerning the principles, applications, and assessment of air pollution control and design and thermodynamics, heat transfer, advanced combustion and renewable energy for energy utilization. It also features regulations and policy instruments adopted around the globe as well as several case studies. Presenting the emerging challenges, new concepts, innovative methodologies, and resolving strategies, as well as illustrative and inspiring case studies, it appeals to a wide range of readers, such as researchers, graduate students, engineers, policy makers, and entrepreneurs.
Download or read book Advanced Characterization Techniques for Thin Film Solar Cells written by Daniel Abou-Ras and published by John Wiley & Sons. This book was released on 2016-07-13 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on advanced characterization methods for thin-film solar cells that have proven their relevance both for academic and corporate photovoltaic research and development. After an introduction to thin-film photovoltaics, highly experienced experts report on device and materials characterization methods such as electroluminescence analysis, capacitance spectroscopy, and various microscopy methods. In the final part of the book simulation techniques are presented which are used for ab-initio calculations of relevant semiconductors and for device simulations in 1D, 2D and 3D. Building on a proven concept, this new edition also covers thermography, transient optoelectronic methods, and absorption and photocurrent spectroscopy.
Download or read book Photovoltaic Modeling Handbook written by Monika Freunek Muller and published by John Wiley & Sons. This book was released on 2018-09-05 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the reader with a solid understanding of the fundamental modeling of photovoltaic devices. After the material independent limit of photovoltaic conversion, the readers are introduced to the most well-known theory of "classical" silicon modeling. Based on this, for each of the most important PV materials, their performance under different conditions is modeled. This book also covers different modeling approaches, from very fundamental theoretic investigations to applied numeric simulations based on experimental values. The book concludes wth a chapter on the influence of spectral variations. The information is supported by providing the names of simulation software and basic literature to the field. The information in the book gives the user specific application with a solid background in hand, to judge which materials could be appropriate as well as realistic expectations of the performance the devices could achieve.
Download or read book Coatings to Improve Optoelectronic Devices written by Selected Articles Published by MDPI and published by MDPI. This book was released on 2020-04-09 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This selection is focused on coatings and films with applications in optoelectronics, such as photovoltaics, photocatalysis, and light-based sensors and phenomena. The studies investigate the optimal composition, crystalline structure, and morphology to deliver the different functionalities sought. Obtaining transparent p-type electrodes is challenging but extremely relevant in optoelectronics. Electric conduction mechanisms and the correlations with structure and doping are discussed. The important issue of the degradation pathways in perovskite-based solar cells and the possibilities offered by different types of coatings to encapsulate the devices as well as the beneficial effect of silica coating as an antireflection and antisoiling layer on well-established solar cells are discussed. New designs of nanoplasmonic films for chemical and biological molecule sensing are reviewed, such as the combination of metallic nanoparticles and nanostructured semiconductors and dispersing metallic or bi-metallic nanoparticles in CuO films. The impacts of structure, defects, and morphology on the photoactivated properties of WO3 films and on the shape memory behavior in Cu–Al–Ni thin films are discussed. Aggregated TiO2 nanoparticles on TiO2 layers are shown to enhance optical transmittance and confer a superhydrophilic characteristic. Finally, aspects of the fundamental characterization of thin films, Drude damping in thin films, and laser-induced deflection technique are discussed.
Download or read book Surfaces and Interfaces for Renewable Energy written by Francisco Manzano-Agugliaro and published by MDPI. This book was released on 2020-02-05 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental problems derived from the massive use of conventional energy resources are one of the main issues that our society has been facing in recent decades. Renewable energies (and particularly solar energy) have become a highly competitive means to meet the world’s increasing energy demands in a sustainable and clean manner. One of the key research challenges for the commercial deployment of several solar energy technologies is focused on the development of feasible and durable coatings that withstand appropriate optical and thermal performance over the lifetime of the solar facilities. This book addresses a number of relevant aspects related to coatings for renewable energies, including a deep survey of coatings used in photovoltaic solar energy, the development of a superhydrophobic and thermal stable silica coating that is potentially suitable for various industrial applications related to renewable technologies, the development of coatings to improve the resistance of structural materials used in concentrating solar thermal technologies with molten salts, and several research works related to solar reflectors for concentrating solar thermal technologies (such us the advanced analysis of the corrosion, the suitability of anti-soiling coatings, and the development of top protective coatings for high-temperature secondary concentrators).
Download or read book Solar Energy written by Christoph Richter and published by Springer. This book was released on 2012-11-29 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gathering some 30 entries from the Encyclopedia of Sustainability Science and Technology, this book presents fundamental principles and technologies for sustainably harnessing solar energy. Covers photovoltaics, solar thermal energy, solar radiation and more.
Download or read book Design and Development of Nanostructured Thin Films written by Antonella Macagnano and published by MDPI. This book was released on 2020-05-13 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their unique size-dependent physicochemical properties, nanostructured thin films are used in a wide range of applications from smart coating and drug delivery to electrocatalysis and highly-sensitive sensors. Depending on the targeted application and the deposition technique, these materials have been designed and developed by tuning their atomic-molecular 2D- and/or 3D-aggregation, thickness, crystallinity, and porosity, having effects on their optical, mechanical, catalytic, and conductive properties. Several open questions remain about the impact of nanomaterial production and use on environment and health. Many efforts are currently being made not only to prevent nanotechnologies and nanomaterials from contributing to environmental pollution but also to design nanomaterials to support, control, and protect the environment. This Special Issue aims to cover the recent advances in designing nanostructured films focusing on environmental issues related to their fabrication processes (e.g., low power and low cost technologies, the use of environmentally friendly solvents), their precursors (e.g., waste-recycled, bio-based, biodegradable, and natural materials), their applications (e.g., controlled release of chemicals, mimicking of natural processes, and clean energy conversion and storage), and their use in monitoring environment pollution (e.g., sensors optically- or electrically-sensitive to pollutants)
Download or read book Thin Film Solar Cells written by Jef Poortmans and published by John Wiley & Sons. This book was released on 2006-10-16 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin-film solar cells are either emerging or about to emerge from the research laboratory to become commercially available devices finding practical various applications. Currently no textbook outlining the basic theoretical background, methods of fabrication and applications currently exist. Thus, this book aims to present for the first time an in-depth overview of this topic covering a broad range of thin-film solar cell technologies including both organic and inorganic materials, presented in a systematic fashion, by the scientific leaders in the respective domains. It covers a broad range of related topics, from physical principles to design, fabrication, characterization, and applications of novel photovoltaic devices.
