Download or read book Pounder s Marine Diesel Engines and Gas Turbines written by Malcolm Latarche and published by Butterworth-Heinemann. This book was released on 2020-12-01 with total page 958 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pounder's Marine Diesel Engines and Gas Turbines, Tenth Edition, gives engineering cadets, marine engineers, ship operators and managers insights into currently available engines and auxiliary equipment and trends for the future. This new edition introduces new engine models that will be most commonly installed in ships over the next decade, as well as the latest legislation and pollutant emissions procedures. Since publication of the last edition in 2009, a number of emission control areas (ECAs) have been established by the International Maritime Organization (IMO) in which exhaust emissions are subject to even more stringent controls. In addition, there are now rules that affect new ships and their emission of CO2 measured as a product of cargo carried. - Provides the latest emission control technologies, such as SCR and water scrubbers - Contains complete updates of legislation and pollutant emission procedures - Includes the latest emission control technologies and expands upon remote monitoring and control of engines

Download or read book Gas Turbine Engineering Handbook written by Meherwan P. Boyce and published by Elsevier. This book was released on 2017-09-01 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Gas Turbine Engineering Handbook has been the standard for engineers involved in the design, selection, and operation of gas turbines. This revision includes new case histories, the latest techniques, and new designs to comply with recently passed legislation. By keeping the book up to date with new, emerging topics, Boyce ensures that this book will remain the standard and most widely used book in this field. The new Third Edition of the Gas Turbine Engineering Hand Book updates the book to cover the new generation of Advanced gas Turbines. It examines the benefit and some of the major problems that have been encountered by these new turbines. The book keeps abreast of the environmental changes and the industries answer to these new regulations. A new chapter on case histories has been added to enable the engineer in the field to keep abreast of problems that are being encountered and the solutions that have resulted in solving them. - Comprehensive treatment of Gas Turbines from Design to Operation and Maintenance. In depth treatment of Compressors with emphasis on surge, rotating stall, and choke; Combustors with emphasis on Dry Low NOx Combustors; and Turbines with emphasis on Metallurgy and new cooling schemes. An excellent introductory book for the student and field engineers - A special maintenance section dealing with the advanced gas turbines, and special diagnostic charts have been provided that will enable the reader to troubleshoot problems he encounters in the field - The third edition consists of many Case Histories of Gas Turbine problems. This should enable the field engineer to avoid some of these same generic problems

Download or read book Diesel Engineering written by and published by . This book was released on 1923 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Gas Turbines for Electric Power Generation written by S. Can Gülen and published by Cambridge University Press. This book was released on 2019-02-14 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Everything you wanted to know about industrial gas turbines for electric power generation in one source with hard-to-find, hands-on technical information.

Download or read book Industrial Gas Turbines written by A M Y Razak and published by Elsevier. This book was released on 2007-10-31 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Gas Turbines: Performance and Operability explains important aspects of gas turbine performance such as performance deterioration, service life and engine emissions. Traditionally, gas turbine performance has been taught from a design perspective with insufficient attention paid to the operational issues of a specific site. Operators are not always sufficiently familiar with engine performance issues to resolve operational problems and optimise performance.Industrial Gas Turbines: Performance and Operability discusses the key factors determining the performance of compressors, turbines, combustion and engine controls. An accompanying engine simulator CD illustrates gas turbine performance from the perspective of the operator, building on the concepts discussed in the text. The simulator is effectively a virtual engine and can be subjected to operating conditions that would be dangerous and damaging to an engine in real-life conditions. It also deals with issues of engine deterioration, emissions and turbine life. The combined use of text and simulators is designed to allow the reader to better understand and optimise gas turbine operation. - Discusses the key factors in determining the perfomance of compressors, turbines, combustion and engine controls - Explains important aspects of gas and turbine perfomance such as service life and engine emissions - Accompanied by CD illustrating gas turbine performance, building on the concepts discussed in the text

Download or read book Handbook of Diesel Engines written by Klaus Mollenhauer and published by Springer Science & Business Media. This book was released on 2010-06-22 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: This machine is destined to completely revolutionize cylinder diesel engine up through large low speed t- engine engineering and replace everything that exists. stroke diesel engines. An appendix lists the most (From Rudolf Diesel’s letter of October 2, 1892 to the important standards and regulations for diesel engines. publisher Julius Springer. ) Further development of diesel engines as economiz- Although Diesel’s stated goal has never been fully ing, clean, powerful and convenient drives for road and achievable of course, the diesel engine indeed revolu- nonroad use has proceeded quite dynamically in the tionized drive systems. This handbook documents the last twenty years in particular. In light of limited oil current state of diesel engine engineering and technol- reserves and the discussion of predicted climate ogy. The impetus to publish a Handbook of Diesel change, development work continues to concentrate Engines grew out of ruminations on Rudolf Diesel’s on reducing fuel consumption and utilizing alternative transformation of his idea for a rational heat engine fuels while keeping exhaust as clean as possible as well into reality more than 100 years ago. Once the patent as further increasing diesel engine power density and was filed in 1892 and work on his engine commenced enhancing operating performance.

Download or read book Principles of Solar Gas Turbines for Electricity Generation written by Amos Madhlopa and published by Springer. This book was released on 2018-05-11 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book dedicated to solar gas turbines, providing fundamental knowledge and state-of-the-art developments in the field. A gas turbine is a heat engine in which a mixture of fuel and air is burned in a chamber that is an integral part of the flow circuit of the working fluid. The burnt gas mixture expands and turns the turbine, which can be connected to a generator for electricity production. Solar gas turbines offer an important alternative to conventional gas turbines driven by non-renewable, polluting fossil fuels such as diesel or natural gas. The book provides a comprehensive overview of the topic as well as numerous illustrations.

Download or read book Advanced Technologies for Gas Turbines written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2020-04-19 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: Leadership in gas turbine technologies is of continuing importance as the value of gas turbine production is projected to grow substantially by 2030 and beyond. Power generation, aviation, and the oil and gas industries rely on advanced technologies for gas turbines. Market trends including world demographics, energy security and resilience, decarbonization, and customer profiles are rapidly changing and influencing the future of these industries and gas turbine technologies. Technology trends that define the technological environment in which gas turbine research and development will take place are also changing - including inexpensive, large scale computational capabilities, highly autonomous systems, additive manufacturing, and cybersecurity. It is important to evaluate how these changes influence the gas turbine industry and how to manage these changes moving forward. Advanced Technologies for Gas Turbines identifies high-priority opportunities for improving and creating advanced technologies that can be introduced into the design and manufacture of gas turbines to enhance their performance. The goals of this report are to assess the 2030 gas turbine global landscape via analysis of global leadership, market trends, and technology trends that impact gas turbine applications, develop a prioritization process, define high-priority research goals, identify high-priority research areas and topics to achieve the specified goals, and direct future research. Findings and recommendations from this report are important in guiding research within the gas turbine industry and advancing electrical power generation, commercial and military aviation, and oil and gas production.

Download or read book Gas Turbine Performance written by Philip P. Walsh and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: A significant addition to the literature on gas turbine technology, the second edition of Gas Turbine Performance is a lengthy text covering product advances and technological developments. Including extensive figures, charts, tables and formulae, this book will interest everyone concerned with gas turbine technology, whether they are designers, marketing staff or users.

Download or read book Developments in High Temperature Corrosion and Protection of Materials written by W Gao and published by Elsevier. This book was released on 2008-04-09 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: High temperature corrosion is a phenomenon that occurs in components that operate at very high temperatures, such as gas turbines, jet engines and industrial plants. Engineers are constantly striving to understand and prevent this type of corrosion. This book examines the latest developments in the understanding of high temperature corrosion processes and protective oxide scales and coatings.Part one looks at high temperature corrosion. Chapters cover diffusion and solid state reactions, external and internal oxidation of alloys, metal dusting corrosion, tribological degradation, hot corrosion, and oxide scales on hot-rolled steel strips. Modern techniques for analysing high temperature oxidation and corrosion are also discussed. Part two discusses methods of protection using ceramics, composites, protective oxide scales and coatings. Chapters focus on layered ternary ceramics, alumina scales, Ti-Al intermetallic compounds, metal matrix composites, chemical vapour deposited silicon carbide, nanocrystalline coatings and thermal barrier coatings. Part three provides case studies illustrating some of the challenges of high temperature corrosion to industry and how they can be overcome. Case studies include the petrochemical industry, modern incinerators and oxidation processing of electronic materials.This book is a valuable reference tool for engineers who develop heat resistant materials, mechanical engineers who design and maintain high temperature equipment and plant, and research scientists and students who study high temperature corrosion and protection of materials. - Describes the latest developments in understanding high temperature corrosion - Presents the latest research by the leading innovators from around the globe - Case studies are provided to illustrate key points

Download or read book Prime Movers of Globalization written by Vaclav Smil and published by MIT Press. This book was released on 2013-02-08 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: The story of how diesel engines and gas turbines, used to power cargo ships and jet airplanes, made today's globally integrated economy possible. The many books on globalization published over the past few years range from claims that the world is flat to an unlikely rehabilitation of Genghis Khan as a pioneer of global commerce. Missing from these accounts is a consideration of the technologies behind the creation of the globalized economy. What makes it possible for us to move billions of tons of raw materials and manufactured goods from continent to continent? Why are we able to fly almost anywhere on the planet within twenty-four hours? In Prime Movers of Globalization, Vaclav Smil offers a history of two key technical developments that have driven globalization: the high-compression non-sparking internal combustion engines invented by Rudolf Diesel in the 1890s and the gas turbines designed by Frank Whittle and Hans-Joachim Pabst von Ohain in the 1930s. The massive diesel engines that power cargo ships and the gas turbines that propel jet engines, Smil argues, are more important to the global economy than any corporate structure or international trade agreement. Smil compares the efficiency and scale of these two technologies to prime movers of the past, including the sail and the steam engine. The lengthy processes of development, commercialization, and diffusion that the diesel engine and the gas turbine went through, he argues, provide perfect examples of gradual technical advances that receive little attention but have resulted in epochal shifts in global affairs and the global economy.

Download or read book Pounder s Marine Diesel Engines and Gas Turbines written by Doug Woodyard and published by Butterworth-Heinemann. This book was released on 2009-08-18 with total page 925 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its first appearance in 1950, Pounder's Marine Diesel Engines has served seagoing engineers, students of the Certificates of Competency examinations and the marine engineering industry throughout the world. Each new edition has noted the changes in engine design and the influence of new technology and economic needs on the marine diesel engine. Now in its ninth edition, Pounder's retains the directness of approach and attention to essential detail that characterized its predecessors. There are new chapters on monitoring control and HiMSEN engines as well as information on developments in electronic-controlled fuel injection. It is fully updated to cover new legislation including that on emissions and provides details on enhancing overall efficiency and cutting CO2 emissions. After experience as a seagoing engineer with the British India Steam Navigation Company, Doug Woodyard held editorial positions with the Institution of Mechanical Engineers and the Institute of Marine Engineers. He subsequently edited The Motor Ship journal for eight years before becoming a freelance editor specializing in shipping, shipbuilding and marine engineering. He is currently technical editor of Marine Propulsion and Auxiliary Machinery, a contributing editor to Speed at Sea, Shipping World and Shipbuilder and a technical press consultant to Rolls-Royce Commercial Marine. - Helps engineers to understand the latest changes to marine diesel engineers - Careful organisation of the new edition enables readers to access the information they require - Brand new chapters focus on monitoring control systems and HiMSEN engines - Over 270 high quality, clearly labelled illustrations and figures to aid understanding and help engineers quickly identify what they need to know

Download or read book The Design of High Efficiency Turbomachinery and Gas Turbines second edition with a new preface written by David Gordon Wilson and published by MIT Press. This book was released on 2014-09-12 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a comprehensive textbook that introduces turbomachinery and gas turbines through design methods and examples. This comprehensive textbook is unique in its design-focused approach to turbomachinery and gas turbines. It offers students and practicing engineers methods for configuring these machines to perform with the highest possible efficiency. Examples and problems are based on the actual design of turbomachinery and turbines. After an introductory chapter that outlines the goals of the book and provides definitions of terms and parts, the book offers a brief review of the basic principles of thermodynamics and efficiency definitions. The rest of the book is devoted to the analysis and design of real turbomachinery configurations and gas turbines, based on a consistent application of thermodynamic theory and a more empirical treatment of fluid dynamics that relies on the extensive use of design charts. Topics include turbine power cycles, diffusion and diffusers, the analysis and design of three-dimensional free-stream flow, and combustion systems and combustion calculations. The second edition updates every chapter, adding material on subjects that include flow correlations, energy transfer in turbomachines, and three-dimensional design. A solutions manual is available for instructors. This new MIT Press edition makes a popular text available again, with corrections and some updates, to a wide audience of students, professors, and professionals.

Download or read book Maritime Technology and Engineering 5 Volume 1 written by Carlos Guedes Soares and published by CRC Press. This book was released on 2021-07-08 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: This set of two volumes comprises the collection of the papers presented at the 5th International Conference on Maritime Technology and Engineering (MARTECH 2020) that was held in Lisbon, Portugal, from 16 to 19 November 2020. The Conference has evolved from the series of biennial national conferences in Portugal, which have become an international event, and which reflect the internationalization of the maritime sector and its activities. MARTECH 2020 is the fifth of this new series of biennial conferences. The set comprises 180 contributions that were reviewed by an International Scientific Committee. Volume 1 is dedicated to maritime transportation, ports and maritime traffic, as well as maritime safety and reliability. It further comprises sections dedicated to ship design, cruise ship design, and to the structural aspects of ship design, such as ultimate strength and composites, subsea structures as pipelines, and to ship building and ship repair.

Download or read book Integrated Gasification Combined Cycle IGCC Technologies written by Ting Wang and published by Woodhead Publishing. This book was released on 2016-11-26 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated Gasification Combined Cycle (IGCC) Technologies discusses this innovative power generation technology that combines modern coal gasification technology with both gas turbine and steam turbine power generation, an important emerging technology which has the potential to significantly improve the efficiencies and emissions of coal power plants. The advantages of this technology over conventional pulverized coal power plants include fuel flexibility, greater efficiencies, and very low pollutant emissions. The book reviews the current status and future developments of key technologies involved in IGCC plants and how they can be integrated to maximize efficiency and reduce the cost of electricity generation in a carbon-constrained world. The first part of this book introduces the principles of IGCC systems and the fuel types for use in IGCC systems. The second part covers syngas production within IGCC systems. The third part looks at syngas cleaning, the separation of CO2 and hydrogen enrichment, with final sections describing the gas turbine combined cycle and presenting several case studies of existing IGCC plants. - Provides an in-depth, multi-contributor overview of integrated gasification combined cycle technologies - Reviews the current status and future developments of key technologies involved in IGCC plants - Provides several case studies of existing IGCC plants around the world

Download or read book GAS Turbine Combustion Second Edition written by Arthur H. Lefebvre and published by CRC Press. This book was released on 1998-09-01 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised edition provides understanding of the basic physical, chemical, and aerodynamic processes associated with gas turbine combustion and their relevance and application to combustor performance and design. It also introduces the many new concepts for ultra-low emissions combustors, and new advances in fuel preparation and liner wall-cooling techniques for their success. It details advanced and practical approaches to combustor design for the clean burning of alternative liquid fuels derived from oil shades, tar sands, and coal. Additional topics include diffusers, combustion performance fuel injection, combustion noise, heat transfer, and emissions.

Download or read book Energy Data Base written by and published by . This book was released on 1984 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt: