Download or read book Diesel Engine written by Saiful Bari and published by BoD – Books on Demand. This book was released on 2013-04-30 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diesel engines, also known as CI engines, possess a wide field of applications as energy converters because of their higher efficiency. However, diesel engines are a major source of NOX and particulate matter (PM) emissions. Because of its importance, five chapters in this book have been devoted to the formulation and control of these pollutants. The world is currently experiencing an oil crisis. Gaseous fuels like natural gas, pure hydrogen gas, biomass-based and coke-based syngas can be considered as alternative fuels for diesel engines. Their combustion and exhaust emissions characteristics are described in this book. Reliable early detection of malfunction and failure of any parts in diesel engines can save the engine from failing completely and save high repair cost. Tools are discussed in this book to detect common failure modes of diesel engine that can detect early signs of failure.

Download or read book Advances and Technology Development in Greenhouse Gases Emission Capture and Conversion written by Mohammad Reza Rahimpour and published by Elsevier. This book was released on 2024-07-20 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances and Technology Development in Greenhouse Gases: Emission, Capture and Conversion is a comprehensive seven-volume set of books that discusses the composition and properties of greenhouse gases, and introduces different sources of greenhouse gases emission and the relation between greenhouse gases and global warming. The comprehensive and detailed presentation of common technologies as well as novel research related to all aspects of greenhouse gases makes this work an indispensable encyclopedic resource for researchers in academia and industry.Volume 6 titled Methane, Nitrox Oxide, and Ozone Conversion and Applications studies the applications of any greenhouse gases (GHGs) other than carbon dioxide. This book reviews the applications of methane, nitrox oxide, and ozone. It investigates any valuable product fabricated with the inclusion of methane, nitrox oxide, and ozone. The book also reviews recent advances, the largest operating plants and pilots for methane conversion, the economic assessments and cost analysis, and environmental impacts and challenges that are faced when developing these processes - Introduces applications and chemicals produced from methane - Describes nitrous oxide conversion and applications - Discusses about various applications of ozone

Download or read book NOx Emission Control Technologies in Stationary and Automotive Internal Combustion Engines written by B. Ashok and published by Elsevier. This book was released on 2021-11-09 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: NOx Emission Control Technologies in Stationary and Automotive Internal Combustion Engines: Approaches Toward NOx Free Automobiles presents the fundamental theory of emission formation, particularly the oxides of nitrogen (NOx) and its chemical reactions and control techniques. The book provides a simplified framework for technical literature on NOx reduction strategies in IC engines, highlighting thermodynamics, combustion science, automotive emissions and environmental pollution control. Sections cover the toxicity and roots of emissions for both SI and CI engines and the formation of various emissions such as CO, SO2, HC, NOx, soot, and PM from internal combustion engines, along with various methods of NOx formation. Topics cover the combustion process, engine design parameters, and the application of exhaust gas recirculation for NOx reduction, making this book ideal for researchers and students in automotive, mechanical, mechatronics and chemical engineering students working in the field of emission control techniques. - Covers advanced and recent technologies and emerging new trends in NOx reduction for emission control - Highlights the effects of exhaust gas recirculation (EGR) on engine performance parameters - Discusses emission norms such as EURO VI and Bharat stage VI in reducing global air pollution due to engine emissions

Download or read book Proceedings of IncoME V CEPE Net 2020 written by Dong Zhen and published by Springer Nature. This book was released on 2021-05-15 with total page 949 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the latest advances, innovations and applications in the field of condition monitoring, plant maintenance and reliability, as presented by leading international researchers and engineers at the 5th International Conference on Maintenance Engineering and the 2020 Annual Conference of the Centre for Efficiency and Performance Engineering Network (IncoME-V & CEPE Net-2020), held in Zhuhai, China on October 23-25, 2020. Topics include vibro-acoustics monitoring, condition-based maintenance, sensing and instrumentation, machine health monitoring, maintenance auditing and organization, non-destructive testing, reliability, asset management, condition monitoring, life-cycle cost optimisation, prognostics and health management, maintenance performance measurement, manufacturing process monitoring, and robot-based monitoring and diagnostics. The contributions, which were selected through a rigorous international peer-review process, share exciting ideas that will spur novel research directions and foster new multidisciplinary collaborations.

Download or read book Phenolic Compounds in Food written by Leo M.L. Nollet and published by CRC Press. This book was released on 2018-01-29 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phenolic compounds, one of the most widely distributed groups of secondary metabolites in plants, have received a lot of attention in the last few years since the consumption of vegetables and beverages with a high level of such compounds may reduce risks of the development of several diseases. This is partially due to their antioxidant power since other interactions with cell functions have been discovered. What’s more, phenolic compounds are involved in many functions in plants, such as sensorial properties, structure, pollination, resistance to pests and predators, germination, processes of seed, development, and reproduction. Phenolic compounds can be classified in different ways, ranging from simple molecules to highly polymerized compounds. Phenolic Compounds in Food: Characterization and Analysis deals with all aspects of phenolic compounds in food. In five sections, the 21 chapters of this book address the classification and occurrence of phenolic compounds in nature and foodstuffs; discuss all major aspects of analysis of phenolic compounds in foods, such as extraction, clean-up, separation, and detection; detail specific analysis methods of a number of classes of phenolic compounds, from simple molecules to complex compounds; describe the antioxidant power of phenolic compounds; and discuss specific analysis methods in different foodstuffs.

Download or read book Asset Intelligence through Integration and Interoperability and Contemporary Vibration Engineering Technologies written by Joseph Mathew and published by Springer. This book was released on 2018-11-11 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings include a collection of papers on a range of topics presented at the 12th World Congress on Engineering Asset Management (WCEAM) in Brisbane, 2 – 4 August 2017. Effective strategies are required for managing complex engineering assets such as built environments, infrastructure, plants, equipment, hardware systems and components. Following the release of the ISO 5500x set of standards in 2014, the 12th WCEAM addressed important issues covering all aspects of engineering asset management across various sectors including health. The topics discussed by the congress delegates are grouped into a number of tracks, including strategies for investment and divestment of assets, operations and maintenance of assets, assessment of assets’ health conditions, risk and vulnerability, technologies, and systems for management of assets, standards, education, training and certification.

Download or read book Controlling Exposure to Diesel Emissions in Underground Mines written by Aleksandar D. Bugarski and published by SME. This book was released on 2012 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of diesel-powered equipment in underground mining operations provides many benefits to the industry. It also presents many challenges to the health and safety of workers as it is a significant source of submicrometer aerosols and noxious gases. This book was developed to assist the coal and metal/nonmetal underground mining industries in their efforts to reduce the exposure of workers to aerosols and gases from diesel-powered equipment. It includes information collected by researchers at the National Institute for Occupational Safety and Health/Office of Mine Safety and Health Research (NIOSH/OMSHR). Prior to the production of this text, the knowledge on this complex issue was fragmented. The goal of this volume is to make the information available in one easy-to-use reference. The book includes comprehensive, mine-specific programs for use by mechanics, mine ventilation engineers, industrial hygienists, mine managers, union health and safety representatives, and personnel responsible for the acquisition of diesel vehicles, engines, exhaust aftertreatment systems, fuels, and lubricants. The description of methods to reduce exposure to diesel aerosols includes curtailment of diesel particulate matter and gaseous emissions at their source, and controlling airborne pollutants with ventilation and personal protective equipment. This information should also help researchers in industry, government, and academia to identify areas that need to be addressed in future research and development efforts.

Download or read book Engineering Asset Management and Infrastructure Sustainability written by Joseph Mathew and published by Springer Science & Business Media. This book was released on 2012-05-11 with total page 1131 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Asset Management 2010 represents state-of-the art trends and developments in the emerging field of engineering asset management as presented at the Fifth World Congress on Engineering Asset Management (WCEAM). The proceedings of the WCEAM 2010 is an excellent reference for practitioners, researchers and students in the multidisciplinary field of asset management, covering topics such as: Asset condition monitoring and intelligent maintenance Asset data warehousing, data mining and fusion Asset performance and level-of-service models Design and life-cycle integrity of physical assets Education and training in asset management Engineering standards in asset management Fault diagnosis and prognostics Financial analysis methods for physical assets Human dimensions in integrated asset management Information quality management Information systems and knowledge management Intelligent sensors and devices Maintenance strategies in asset management Optimisation decisions in asset management Risk management in asset management Strategic asset management Sustainability in asset management

Download or read book Condition Monitoring and Diagnostic Engineering Management written by A. Starr and published by Elsevier. This book was released on 2001-09-14 with total page 1021 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Proceedings contains the papers presented at the 14th International Conference on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2001), held in Manchester, UK, on 4-6 September 2001. COMADEM 2001 builds on the excellent reputation of previous conferences in this series, and is essential for anyone working in the field of condition monitoring and maintenance management.The scope of the conference is truly interdisciplinary. The Proceedings contains papers from six continents, written by experts in industry and academia the world over, bringing together the latest thoughts on topics including: Condition-based maintenance Reliability centred maintenance Asset management Industrial case studies Fault detection and diagnosis Prognostics Non-destructive evaluation Integrated diagnostics Vibration Oil and debris analysis Tribology Thermal techniques Risk assessment Structural health monitoring Sensor technology Advanced signal processing Neural networks Multivariate statistics Data compression and fusion This Proceedings also contains a wealth of industrial case studies, and the latest developments in education, training and certification. For more information on COMADEM's aims and scope, please visit http://www.comadem.com

Download or read book NOx Trap Catalysts and Technologies written by Luca Lietti and published by Royal Society of Chemistry. This book was released on 2018-06-13 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will be the first to comprehensively present the current research on catalysts used for NOx abatement in lean exhausts.

Download or read book Liquid Biofuels written by Krushna Prasad Shadangi and published by John Wiley & Sons. This book was released on 2021-06-29 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compiled by a well-known expert in the field, Liquid Biofuels provides a profound knowledge to researchers about biofuel technologies, selection of raw materials, conversion of various biomass to biofuel pathways, selection of suitable methods of conversion, design of equipment, selection of operating parameters, determination of chemical kinetics, reaction mechanism, preparation of bio-catalyst: its application in bio-fuel industry and characterization techniques, use of nanotechnology in the production of biofuels from the root level to its application and many other exclusive topics for conducting research in this area. Written with the objective of offering both theoretical concepts and practical applications of those concepts, Liquid Biofuels can be both a first-time learning experience for the student facing these issues in a classroom and a valuable reference work for the veteran engineer or scientist. The description of the detailed characterization methodologies along with the precautions required during analysis are extremely important, as are the detailed description about the ultrasound assisted biodiesel production techniques, aviation biofuels and its characterization techniques, advance in algal biofuel techniques, pre-treatment of biomass for biofuel production, preparation and characterization of bio-catalyst, and various methods of optimization. The book offers a comparative study between the various liquid biofuels obtained from different methods of production and its engine performance and emission analysis so that one can get the utmost idea to find the better biofuel as an alternative fuel. Since the book covers almost all the field of liquid biofuel production techniques, it will provide advanced knowledge to the researcher for practical applications across the energy sector. A valuable reference for engineers, scientists, chemists, and students, this volume is applicable to many different fields, across many different industries, at all levels. It is a must-have for any library.

Download or read book Intelligent Systems Theory Research and Innovation in Applications written by Ricardo Jardim-Goncalves and published by Springer Nature. This book was released on 2020-03-03 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: From artificial neural net / game theory / semantic applications, to modeling tools, smart manufacturing systems, and data science research – this book offers a broad overview of modern intelligent methods and applications of machine learning, evolutionary computation, Industry 4.0 technologies, and autonomous agents leading to the Internet of Things and potentially a new technological revolution. Though chiefly intended for IT professionals, it will also help a broad range of users of future emerging technologies adapt to the new smart / intelligent wave. In separate chapters, the book highlights fourteen successful examples of recent advances in the rapidly evolving area of intelligent systems. Covering major European projects paving the way to a serious smart / intelligent collaboration, the chapters explore e.g. cyber-security issues, 3D digitization, aerial robots, and SMEs that have introduced cyber-physical production systems. Taken together, they offer unique insights into contemporary artificial intelligence and its potential for innovation.

Download or read book Combustion Engine Diagnosis written by Rolf Isermann and published by Springer. This book was released on 2017-05-04 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers first a short introduction to advanced supervision, fault detection and diagnosis methods. It then describes model-based methods of fault detection and diagnosis for the main components of gasoline and diesel engines, such as the intake system, fuel supply, fuel injection, combustion process, turbocharger, exhaust system and exhaust gas aftertreatment. Additionally, model-based fault diagnosis of electrical motors, electric, pneumatic and hydraulic actuators and fault-tolerant systems is treated. In general series production sensors are used. It includes abundant experimental results showing the detection and diagnosis quality of implemented faults. Written for automotive engineers in practice, it is also of interest to graduate students of mechanical and electrical engineering and computer science.

Download or read book Vibration based Condition Monitoring written by Robert Bond Randall and published by John Wiley & Sons. This book was released on 2021-06-08 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration-based Condition Monitoring Stay up to date on the newest developments in machine condition monitoring with this brand-new resource from an industry leader The newly revised Second Edition of Vibration-based Condition Monitoring: Industrial, Automotive and Aerospace Applications delivers a thorough update to the most complete discussion of the field of machine condition monitoring. The distinguished author offers readers new sections on diagnostics of variable speed machines, including wind turbines, as well as new material on the application of cepstrum analysis to the separation of forcing functions, structural model properties, and the simulation of machines and faults. The book provides improved methods of order tracking based on phase demodulation of reference signals and new methods of determining instantaneous machine speed from the vibration response signal. Readers will also benefit from an insightful discussion of new methods of calculating the Teager Kaiser Energy Operator (TKEO) using Hilbert transform methods in the frequency domain. With a renewed emphasis on the newly realized possibility of making virtual instruments, readers of Vibration-based Condition Monitoring will benefit from the wide variety of new and updated topics, like: A comprehensive introduction to machine condition monitoring, including maintenance strategies, condition monitoring methods, and an explanation of the basic problem of condition monitoring An exploration of vibration signals from rotating and reciprocating machines, including signal classification and torsional vibrations An examination of basic and newly developed signal processing techniques, including statistical measures, Fourier analysis, Hilbert transform and demodulation, and digital filtering, pointing out the considerable advantages of non-causal processing, since causal processing gives no benefit for condition monitoring A discussion of fault detection, diagnosis and prognosis in rotating and reciprocating machines, in particular new methods using fault simulation, since “big data” cannot provide sufficient data for late-stage fault development Perfect for machine manufacturers who want to include a machine monitoring service with their product, Vibration-based Condition Monitoring: Industrial, Automotive and Aerospace Applications will also earn a place in university and research institute libraries where there is an interest in machine condition monitoring and diagnostics.

Download or read book Introduction to Diesel Emissions written by Richard Viskup and published by BoD – Books on Demand. This book was released on 2020-03-18 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first invention and development of the functional diesel engine was in 1897 by Rudolf Christian Karl Diesel, German inventor. Until now, this invention has been superseded by the development of very productive engines and mechanics. Current diesel engines are well known to many people around the world and serve in innumerable applications for various types of public transport, light and heavy duty transportation, for automotive, railway, maritime or aviation transportation, in different harsh environments, in construction, in mining, and for diverse industries. The light duty or heavy-duty diesel engines have some drawbacks. One of the main concerns is connected with exhaust emissions generated by diesel engines. This book discusses the generation of diesel exhaust emissions and mitigations, performance, emissions and combustion evaluations, utilisation of alternative biodiesel fuels, comparison of different techniques for measurement of soot and diesel particulate matter, analyses of diesel particulate matter flow pattern, and chemical composition of diesel particulate matter. The main concern of this book is to expand knowledge of readers and bring together the latest research findings related to diesel engine exhaust emissions.

Download or read book Soft Computing in Condition Monitoring and Diagnostics of Electrical and Mechanical Systems written by Hasmat Malik and published by Springer Nature. This book was released on 2020-01-17 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses a range of complex issues associated with condition monitoring (CM), fault diagnosis and detection (FDD) in smart buildings, wide area monitoring (WAM), wind energy conversion systems (WECSs), photovoltaic (PV) systems, structures, electrical systems, mechanical systems, smart grids, etc. The book’s goal is to develop and combine all advanced nonintrusive CMFD approaches on a common platform. To do so, it explores the main components of various systems used for CMFD purposes. The content is divided into three main parts, the first of which provides a brief introduction, before focusing on the state of the art and major research gaps in the area of CMFD. The second part covers the step-by-step implementation of novel soft computing applications in CMFD for electrical and mechanical systems. In the third and final part, the simulation codes for each chapter are included in an extensive appendix to support newcomers to the field.

Download or read book Lubricant Analysis and Condition Monitoring written by R. David Whitby and published by CRC Press. This book was released on 2021-12-22 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Almost all mechanical devices used in every industry require lubrication. Lubricant Analysis and Condition Monitoring explains the benefits of identifying, planning, implementing and using lubricant and machine condition monitoring programmes to extend the lifetimes of both lubricants and machines, to achieve maximum productivity and profitability while reducing impacts on waste and the environment. This book: Offers a comprehensive overview of all types of tests used in lubricant condition monitoring programmes Discusses monitoring the condition of all types of components, machines, equipment and systems used in all industries Considers new and emerging machines, equipment and systems, including electric and hybrid vehicles Suggests which tests to use for each type of machine, equipment or system and, just as importantly, which tests not to use Provides practical examples of how to set up, run and manage condition monitoring programmes and how to achieve significant cost savings through planned and predictive maintenance schedules Gathering vital information that users of lubricants need in one place, this book is of practical use to mechanical, maintenance, manufacturing and marine engineers as well as metallurgists, chemists and maintenance technicians.