Download or read book Developments in Thin Walled Structures 3 written by J. Rhodes and published by CRC Press. This book was released on 2012-01-09 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developments in Thin Walled Structures 3 written by J. Rhodes and published by CRC Press. This book was released on 1987-08-28 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the growing interest in weight and cost-conscious design of structures across a range of engineering applications. It discusses linear and sheet structural components, and is concerned with the development of a powerful approach to the analysis of shell mechanics.
Download or read book Developments in Thin walled Structures written by J. Rhodes and published by . This book was released on 1982 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thin Walled Structures written by J.Y. Richard Liew and published by Elsevier. This book was released on 1998-11-27 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin-plated structures are used extensively in building construction, automobile, aircraft, shipbuilding and other industries because of a number of favourable factors such as high strength-weight ratio, development of new materials and processes and the availability of efficient analytical methods. This class of structure is made by joining thin plates together at their edges and they rely for their rigidity and strength upon the tremendous stiffness and load-carrying capacity of the flat plates from which they are made. Many of the problems encountered in these structures arise because of the effects of local buckling. The knowledge of various facets of this phenomenon has increased dramatically since the 1960s. Problem areas which were hitherto either too complex for rigorous analysis or whose subtleties were not fully realized have in these years been subjected to intensive study. Great advances have been made in the areas of inelastic buckling. The growth in use of lightweight strong materials, such as fibre-reinforced plastics has also been a contributory factor towards the need for advances in the knowledge of the far post-buckling range. The conference is a sequel to the international conference organised by the University of Strathclyde in December 1996 and this international gathering will provide the opportunity for discussion of recent developments and trends in design of thin-walled structures.
Download or read book Stability and Vibrations of Thin Walled Composite Structures written by Haim Abramovich and published by Woodhead Publishing. This book was released on 2017-05-29 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stability and Vibrations of Thin-Walled Composite Structures presents engineering and academic knowledge on the stability (buckling and post buckling) and vibrations of thin walled composite structures like columns, plates, and stringer stiffened plates and shells, which form the basic structures of the aeronautical and space sectors. Currently, this knowledge is dispersed in several books and manuscripts, covering all aspects of composite materials. The book enables both engineers and academics to locate valuable, up-to-date knowledge on buckling and vibrations, be it analytical or experimental, and use it for calculations or comparisons. The book is also useful as a textbook for advanced-level graduate courses. Presents a unified, systematic, detailed and comprehensive overview of the topic Contains contributions from leading experts in the field Includes a dedicated section on testing and experimental results
Download or read book The Behavior of Thin Walled Structures Beams Plates and Shells written by Jack R. Vinson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended primarily as a teaching text, as well as a reference for individual study in the behavior of thin walled structural components. Such structures are widely used in the engineering profession for spacecraft, missiles, aircraft, land-based vehicles, ground structures, ocean craft, underwater vessels and structures, pressure vessels, piping, chemical processing equipment, modern housing, etc. It presupposes that the reader has already completed one basic course in the mechanics or strength of materials. It can be used for both undergraduate and graduate courses. Since beams (columns, rods), plates and shells comprise components of so many of these modern structures, it is necessary for engineers to have a working knowledge of their behavior when these structures are subjected to static, dynamic (vibration and shock) and environmental loads. Since this text is intended for both teaching and self-study, it stresses fundamental behavior and techniques of solution. It is not an encyclopedia of all research or design data, but provides the reader the wherewithal to read and study the voluminous literature. Chapter 1 introduces the three-dimensional equations oflinear elasticity, deriving them to the extent necessary to treat the following material. Chapter 2 presents, in a concise way, the basic assumptions and derives the governing equations for classical Bernoulli-Euler beams and plates in a manner that is clearly understood.
Download or read book The Developments Series written by J. Rhodes and published by . This book was released on 1982 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thin Walled Structures with Structural Imperfections written by L.A. Godoy and published by Elsevier. This book was released on 1996-05-10 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin-walled structures are designed with advanced numerical analysis techniques and constructed using sophisticated fabrication processes. There are, however, a number of factors that may result in a structure that is not exactly coincident with what was considered during the design calculations. These features may be associated with changes in the properties of the structure, in the geometry, and many others. But even small changes in the structure may sometimes produce significant changes in the response. The present work is intended to introduce professionals and researchers to the effects of imperfections on the stresses in thin-walled structures. The main idea behind the presentation is that small imperfections may introduce changes in the stresses that are nearly equal to the stresses due to the loads. The book is organized into two main parts. The first part (Chapters 1 to 6) covers the techniques for analyzing imperfections. In the second part the emphasis is on applications, which at present may be found scattered throughout many scientific and professional journals. More practical aspects of imperfections may be found in Chapter 12. It is assumed that the reader is familiar with finite element techniques, and with the basics of shell structures.
Download or read book Thin Walled Structures Advances and Developments written by J. Zaras and published by Elsevier. This book was released on 2001-06-18 with total page 779 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers presented at the Third International Conference on Thin-Walled Structures, Cracow, Poland on June 5-7, 2001. There has been a substantial growth in knowledge in the field of Thin-Walled Structures over the past few decades. Lightweight structures are in widespread use in the Civil Engineering, Mechanical Engineering, Aeronautical, Automobile, Chemical and Offshore Engineering fields. The development of new processes, new methods of connections, new materials has gone hand-in-hand with the evolution of advanced analytical methods suitable for dealing with the increasing complexity of the design work involved in ensuring safety and confidence in the finished products. Of particular importance with regard to the analytical process is the growth in use of the finite element method. This method, about 40 years ago, was confined to rather specialist use, mainly in the aeronautical field, because of its requirements for substantial calculation capacity. The development over recent years of extremely powerful microcomputers has ensured that the application of the finite element method is now possible for problems in all fields of engineering, and a variety of finite element packages have been developed to enhance the ease of use and the availability of the method in the engineering design process.
Download or read book Finite Element Analysis of Thin Walled Structures written by Dr John W. Bull and published by CRC Press. This book was released on 1988-01-25 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes current developments in finite element analysis and the design of certain types of thin-walled structures. The first three chapters lay the foundations for the development and use of finite elements for thin-walled structures, look at finite elements packages and discuss data input and mesh arrangements. The final four chapters use the finite element method to assist in the solution of thin-walled structure problems. Some of the problems solved include; water and air inflated structures; axisymmetric thin shells; ship structures and offshore structures. This book will be an interest to design engineers, researchers and postgraduates.
Download or read book Advanced Topics Of Thin walled Structures written by Haim Abramovich and published by World Scientific. This book was released on 2021-06-10 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique compendium presents some new topics related to thin-walled structures, like beams, plates and shells used in aerospace structures. It highlights their dynamic behaviors and also the correlation between compressive loading and natural frequency to enable a correlation between the two, yielding a valuable non-destructive tool, to predict buckling for thin-walled structures.This useful reference text combines valuable data on metal materials and composite materials together with new adaptive and smart materials like piezoelectricity, shape memory alloys and optic fibers, which form the present state of the art in thin-walled structure domain.
Download or read book Thin walled Structures written by J. Rhodes and published by John Wiley & Sons. This book was released on 1980 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fire Performance of Thin Walled Steel Structures written by Yong Wang and published by CRC Press. This book was released on 2020-04-01 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an authoritative account of the latest developments in fire performance and fire resistant design of thin-walled steel structures. It provides a comprehensive review of recent research, including fire tests of thin-walled steel structural members and systems, numerical modelling of heat transfer and structural behaviour, elevated temperature material properties, methods of improving fire resistance of thin-walled steel structures, and performance based fire resistant design methods. Worked examples navigate the reader through some of the complexities of this specialist subject. This is the first book devoted to the fundamental principles of this emerging subject, as thin-walled steel structures are increasingly being used in building construction. It will be valuable to fire protection engineers who want to optimise fire resistant design of thin-walled steel structures, and specialist manufacturers needing to control fire resistance of thin-walled steel structural systems, as well as to the research community.
Download or read book Cold Formed Steel Design written by Wei-Wen Yu and published by John Wiley & Sons. This book was released on 2019-09-16 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides the latest AISI North American specifications for cold-formed steel design Hailed by professionals around the world as the definitive text on the design of cold-formed steel, this book provides descriptions of the construction and structural behavior of cold-formed steel members and connections from both theoretical and experimental points of view. Updated to reflect the 2016 AISI North American specification and 2015 North American framing standards, this all-new fifth edition offers readers a better understanding of the analysis and design of the thin-walled, cold-formed steel structures that have been widely used in building construction and other areas in recent years. Cold-Formed Steel Design, 5th Edition has been revised and reorganized to incorporate the Direct Strength Method. It discusses the reasons and justification for the various design provisions of the North American specification and framing design standards. It provides chapter coverage of: the types of steels and their most important mechanical properties; the fundamentals of buckling modes; commonly used terms; the design of flexural members, compression members and closed cylindrical tubes, and of beam–columns using ASD, LRFD, and LSD methods; shear diaphragms and shell roof structures; standard corrugated sheets; and more. Updated to the 2016 North American (AISI S100) design specification and 2015 North American (AISI S240) design standard Offers thorough coverage of ASD, LRFD, LSD, and DSM design methods Integrates DSM in the main body of design provisions Features a new section on Power-Actuated Fastener (PAF) Connections Provides new examples and explanations of design provisions Cold-Formed Steel Design, 5th Edition is not only instructive for students, but can serve as a major source of reference for structural engineers, researchers, architects, and construction managers.
Download or read book Light Gauge Metal Structures Recent Advances written by Jacques Rondal and published by Springer Science & Business Media. This book was released on 2007-08-08 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to review recent research and technical advances, including the progress in design codes, related to the engineering applications of light gauge metal sections made in carbon, high strength and stainless steel, as well as aluminium alloys. Included is a review of the new technologies for connections of light gauge metal members. Main advanced applications, for residential, non residential and industrial buildings and pallet rack systems are also covered. For the first time, this book takes into account all the metallic materials now used more and more for structural components. The book will be of great interest not only for researchers but also for design engineers faced to the use of new metallic materials in modern structural applications.
Download or read book Design of Cold formed Steel Structures written by ECCS - European Convention for Constructional Steelwork and published by John Wiley & Sons. This book was released on 2013-08-06 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is concerned with design of cold-formed steel structures in building based on the Eurocode 3 package, particularly on EN 1993-1-3. It contains the essentials of theoretical background and design rules for cold-formed steel sections and sheeting, members and connections for building applications. Elaborated examples and design applications - more than 200 pages - are included in the respective chapters in order to provide a better understanding to the reader.
Download or read book Developments in Thin walled Structures written by and published by . This book was released on 1982 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
