Download or read book Modeling and Computation of Boundary Layer Flows written by Tuncer Cebeci and published by Springer. This book was released on 2009-09-02 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of the book, Modeling and Computation of Boundary-Layer Flows^ extends the topic to include compressible flows. This implies the inclusion of the energy equation and non-constant fluid properties in the continuity and momentum equations. The necessary additions are included in new chapters, leaving the first nine chapters to serve as an introduction to incompressible flows and, therefore, as a platform for the extension. This part of the book can be used for a one semester course as described below. Improvements to the incompressible flows portion of the book include the removal of listings of computer programs and their description, and their incor poration in two CD-ROMs. A listing of the topics incorporated in the CD-ROM is provided before the index. In Chapter 7 there is a more extended discussion of initial conditions for three-dimensional flows, application of the characteristic box to a model problem and discussion of flow separation in three-dimensional laminar flows. There are also changes to Chapter 8, which now includes new sections on Tollmien-Schlichting and cross-flow instabilities and on the predic tion of transition with parabolised stability equations, and Chapter 9 provides a description of the rational behind interactive boundary-layer procedures.
Download or read book Recent Advances in Boundary Layer Theory written by Alfred Kluwick and published by Springer. This book was released on 1998-08-12 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dedicated to Prof. W.Schneider on the Occasion of his 60th Birthday
Download or read book Approximate Turbulent Boundary layer Development in Plane Compressible Flow Along Thermally Insulated Surfaces with Application to Supersonic tunnel Contour Correction written by Maurice Tucker and published by . This book was released on 1950 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: As an application of the method, the contour correction of supersonic nozzles for the effects of boundary-layer development is discussed from the requirement of continuity of mass flow and from the requirement of expansion- and shock-wave elimination.
Download or read book Boundary Layer Theory written by Hermann Schlichting (Deceased) and published by Springer. This book was released on 2016-10-04 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of the near-legendary textbook by Schlichting and revised by Gersten presents a comprehensive overview of boundary-layer theory and its application to all areas of fluid mechanics, with particular emphasis on the flow past bodies (e.g. aircraft aerodynamics). The new edition features an updated reference list and over 100 additional changes throughout the book, reflecting the latest advances on the subject.
Download or read book Analysis of Turbulent Boundary Layers written by Tuncer Cebeci and published by Elsevier. This book was released on 2012-12-02 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis of Turbulent Boundary Layers focuses on turbulent flows meeting the requirements for the boundary-layer or thin-shear-layer approximations. Its approach is devising relatively fundamental, and often subtle, empirical engineering correlations, which are then introduced into various forms of describing equations for final solution. After introducing the topic on turbulence, the book examines the conservation equations for compressible turbulent flows, boundary-layer equations, and general behavior of turbulent boundary layers. The latter chapters describe the CS method for calculating two-dimensional and axisymmetric laminar and turbulent boundary layers. This book will be useful to readers who have advanced knowledge in fluid mechanics, especially to engineers who study the important problems of design.
Download or read book Analysis of Turbulent Flows with Computer Programs written by Tuncer Cebeci and published by Elsevier. This book was released on 2004 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling and Computation of Turbulent Flows has been written by one of the most prolific authors in the field of CFD. Professor of aerodynamics at SUPAERO and director of DMAE at ONERA, the author calls on both his academic and industrial experience when presenting this work. The field of CFD is strongly represented by the following corporate companies; Boeing; Airbus; Thales; United Technologies and General Electric, government bodies and academic institutions also have a strong interest in this exciting field. Each chapter has also been specifically constructed to constitute as an advanced textbook for PhD candidates working in the field of CFD, making this book essential reading for researchers, practitioners in industry and MSc and MEng students. * A broad overview of the development and application of Computational Fluid Dynamics (CFD), with real applications to industry * A Free CD-Rom which contains computer program's suitable for solving non-linear equations which arise in modeling turbulent flows * Professor Cebeci has published over 200 technical papers and 14 books, a world authority in the field of CFD
Download or read book Fluid Mechanics for Engineers written by Meinhard T. Schobeiri and published by Springer Science & Business Media. This book was released on 2010-03-27 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contents of this book covers the material required in the Fluid Mechanics Graduate Core Course (MEEN-621) and in Advanced Fluid Mechanics, a Ph. D-level elective course (MEEN-622), both of which I have been teaching at Texas A&M University for the past two decades. While there are numerous undergraduate fluid mechanics texts on the market for engineering students and instructors to choose from, there are only limited texts that comprehensively address the particular needs of graduate engineering fluid mechanics courses. To complement the lecture materials, the instructors more often recommend several texts, each of which treats special topics of fluid mechanics. This circumstance and the need to have a textbook that covers the materials needed in the above courses gave the impetus to provide the graduate engineering community with a coherent textbook that comprehensively addresses their needs for an advanced fluid mechanics text. Although this text book is primarily aimed at mechanical engineering students, it is equally suitable for aerospace engineering, civil engineering, other engineering disciplines, and especially those practicing professionals who perform CFD-simulation on a routine basis and would like to know more about the underlying physics of the commercial codes they use. Furthermore, it is suitable for self study, provided that the reader has a sufficient knowledge of calculus and differential equations. In the past, because of the lack of advanced computational capability, the subject of fluid mechanics was artificially subdivided into inviscid, viscous (laminar, turbulent), incompressible, compressible, subsonic, supersonic and hypersonic flows.
Download or read book Modeling Complex Turbulent Flows written by Manuel D. Salas and published by Springer Science & Business Media. This book was released on 1999-04-30 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulence modeling both addresses a fundamental problem in physics, 'the last great unsolved problem of classical physics,' and has far-reaching importance in the solution of difficult practical problems from aeronautical engineering to dynamic meteorology. However, the growth of supercom puter facilities has recently caused an apparent shift in the focus of tur bulence research from modeling to direct numerical simulation (DNS) and large eddy simulation (LES). This shift in emphasis comes at a time when claims are being made in the world around us that scientific analysis itself will shortly be transformed or replaced by a more powerful 'paradigm' based on massive computations and sophisticated visualization. Although this viewpoint has not lacked ar ticulate and influential advocates, these claims can at best only be judged premature. After all, as one computational researcher lamented, 'the com puter only does what I tell it to do, and not what I want it to do. ' In turbulence research, the initial speculation that computational meth ods would replace not only model-based computations but even experimen tal measurements, have not come close to fulfillment. It is becoming clear that computational methods and model development are equal partners in turbulence research: DNS and LES remain valuable tools for suggesting and validating models, while turbulence models continue to be the preferred tool for practical computations. We believed that a symposium which would reaffirm the practical and scientific importance of turbulence modeling was both necessary and timely.
Download or read book Viscous Drag Reduction in Boundary Layers written by and published by AIAA. This book was released on 1990 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulent Shear Flows 5 written by Franz Durst and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first four symposia in the series on turbulent shear flows have been held alternately in the United States and Europe with the first and third being held at universities in eastern and western States, respectively. Continuing this pattern, the Fifth Symposium on Turbulent Shear Flows was held at Cornell University, Ithaca, New York, in August 1985. The meeting brought together more than 250 participants from around the world to present the results of new research on turbulent shear flows. It also provided a forum for lively discussions on the implications (practical or academic) of some of the papers. Nearly 100 formal papers and about 20 shorter communications in open forums were presented. In all the areas covered, the meeting helped to underline the vitality of current research into turbulent shear flows whether in experimental, theoretical or numerical studies. The present volume contains 25 of the original symposium presentations. All have been further reviewed and edited and several have been considerably extended since their first presentation. The editors believe that the selection provides papers of archival value that, at the same time, give a representative statement of current research in the four areas covered by this book: - Homogeneous and Simple Flows - Free Flows - Wall Flows - Reacting Flows Each of these sections begins with an introductory article by a distinguished worker in the field.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Aerothermodynamics of Aircraft Engine Components written by Gordon C. Oates and published by AIAA. This book was released on 1985 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Design and R & D engineers and students will value the comprehensive, meticulous coverage in this volume. Beginning with the basic principles and concepts of aeropropulsion combustion, chapters explore specific processes, limitations, and analytical methods as they bear on component design.
Download or read book Further Developments in Turbulence Management written by K. Krishna Prasad and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The thrust of modern research on turbulence in fluids is concerned with coherent structures and modelling. Riblets have been shown to reduce drag, and the papers presented in this volume tackle the main question of the mechanism responsible for this behaviour in turbulent flow. The contributions in this volume were presented at the Sixth Drag Reduction Meeting held at Eindhoven during November 1991. This volume will be a useful reference work for engineers, physicists and applied mathematicians interested in the topic of fluid turbulence.
Download or read book NASA Technical Memorandum written by and published by . This book was released on 1994 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Computation Modeling and Control of Transitional and Turbulent Flows written by Tapan Kumar Sengupta and published by World Scientific. This book was released on 2015-12-01 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The role of high performance computing in current research on transitional and turbulent flows is undoubtedly very important. This review volume provides a good platform for leading experts and researchers in various fields of fluid mechanics dealing with transitional and turbulent flows to synergistically exchange ideas and present the state of the art in the fields. Contributed by eminent researchers, the book chapters feature keynote lectures, panel discussions and the best invited contributed papers."--
Download or read book The Aerothermodynamics of Aircraft Gas Turbine Engines written by Gordon C. Oates and published by . This book was released on 1978 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Aerodynamics of Heavy Vehicles Trucks Buses and Trains written by Rose McCallen and published by Springer Science & Business Media. This book was released on 2004-09 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the carefully edited contributions to the United Engineering Foundation Conference: The Aerodynamics of Heavy Vehicles: Trucks, Buses and Trains held in Monterey, California from December 2-6, 2002. This conference brought together 90 leading engineering researchers discussing the aerodynamic drag of heavy vehicles. The book topics include a comparison of computational fluid dynamics calculations using both steady and unsteady Reynolds-averaged Navier-Stokes, large-eddy simulation, and hybrid turbulence models and experimental data obtained from wind tunnel experiments. Advanced experimental techniques including three-dimensional particle image velocimetry are presented as well, along with their use in evaluating drag reduction devices.
