Download or read book Developments in Petroleum Engineering 1 written by D.C. Wilson and published by CRC Press. This book was released on 1985-06-27 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the fundamental aspects of petroleum exploitation and production is that of petroleum engineering, ie the assessment and recovery of oil from the various types of oil 'reservoirs'.The importance of effective petroleum engineering has increased dramatically due to a number or of varying reasons. Firstly, recoverable oil reserves should be capable of extended life by application of efficient reservoir depletion methods. Secondly, the average recovery factor does not appear to have increased over the last three decades. Thirdly, the behaviour of reservoirs is still unpredictable in spite of the fact that the principles of oil recovery are better understood. Finally, there has been an enormous growth in the number of computer-based analysis techniques available to the engineer. These factors, taken in conjunction with the fact that many developments have been presented as unpublished papers, have highlighted the need for a series of volumes which will give the engineer a starting point for the collection of up-to-date information.This new series of volumes, Developments in Petroleum Engineering, is intended to fill this gap and will contain reviews of recent developments. The chapters are written by specialists at a level which summarises the progress, but does not necessarily cover every facet and detail, of a particular subject. Rather, they direct the reader to the most useful of the original sources.
Download or read book PVT and Phase Behaviour Of Petroleum Reservoir Fluids written by Ali Danesh and published by Elsevier. This book was released on 1998-05-07 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on PVT and Phase Behaviour Of Petroleum Reservoir Fluids is volume 47 in the Developments in Petroleum Science series. The chapters in the book are: Phase Behaviour Fundamentals, PVT Tests and Correlations, Phase Equilibria, Equations of State, Phase Behaviour Calculations, Fluid Characterisation, Gas Injection, Interfacial Tension, and Application in Reservoir Simulation.
Download or read book Fundamentals of Reservoir Engineering written by L.P. Dake and published by Elsevier. This book was released on 1983-01-01 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book is fast becoming the standard text in its field", wrote a reviewer in the Journal of Canadian Petroleum Technology soon after the first appearance of Dake's book. This prediction quickly came true: it has become the standard text and has been reprinted many times. The author's aim - to provide students and teachers with a coherent account of the basic physics of reservoir engineering - has been most successfully achieved. No prior knowledge of reservoir engineering is necessary. The material is dealt with in a concise, unified and applied manner, and only the simplest and most straightforward mathematical techniques are used. This low-priced paperback edition will continue to be an invaluable teaching aid for years to come.
Download or read book Hydrocarbon Exploration and Production written by Frank Jahn and published by Elsevier. This book was released on 1998-03-13 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on hydrocarbon exploration and production is the first volume in the series Developments in Petroleum Science. The chapters are: The Field Life Cycle, Exploration, Drilling Engineering, Safety and The Environment, Reservoir Description, Volumetric Estimation, Field Appraisal, Reservoir Dynamic Behaviour, Well Dynamic Behaviour, Surface Facilities, Production Operations and Maintenance, Project and Contract Management, Petroleum Economics, Managing the Producing Field, and Decommissioning.
Download or read book Geophysics for Petroleum Engineers written by Fred Aminzadeh and published by Newnes. This book was released on 2013-12-09 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geophysics for Petroleum Engineers focuses on the applications of geophysics in addressing petroleum engineering problems. It explores the complementary features of geophysical techniques in better understanding, characterizing, producing and monitoring reservoirs. This book introduces engineers to geophysical methods so that they can communicate with geophysicist colleagues and appreciate the benefits of their work. These chapters describe fundamentals of geophysical techniques, their physical bases, their applications and limitations, as well as possible pitfalls in their misuse. Case study examples illustrate the integration of geophysical data with various other data types for predicting and describing reservoir rocks and fluid properties. The examples come from all over the world, with several case histories from the fields in the Middle East. Introduces geophysical methods to engineers Helps understanding, characterizing, producing and monitoring of geophysical techniques Updates the changing needs of reservoir engineering
Download or read book Developments in petroleum engineering written by and published by . This book was released on 1988 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developments in Petroleum Engineering written by Arthur Lubinski and published by . This book was released on with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Petroleum Engineering Principles Calculations and Workflows written by Moshood Sanni and published by John Wiley & Sons. This book was released on 2018-10-23 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and practical guide to methods for solving complex petroleum engineering problems Petroleum engineering is guided by overarching scientific and mathematical principles, but there is sometimes a gap between theoretical knowledge and practical application. Petroleum Engineering: Principles, Calculations, and Workflows presents methods for solving a wide range of real-world petroleum engineering problems. Each chapter deals with a specific issue, and includes formulae that help explain primary principles of the problem before providing an easy to follow, practical application. Volume highlights include: A robust, integrated approach to solving inverse problems In-depth exploration of workflows with model and parameter validation Simple approaches to solving complex mathematical problems Complex calculations that can be easily implemented with simple methods Overview of key approaches required for software and application development Formulae and model guidance for diagnosis, initial modeling of parameters, and simulation and regression Petroleum Engineering: Principles, Calculations, and Workflows is a valuable and practical resource to a wide community of geoscientists, earth scientists, exploration geologists, and engineers. This accessible guide is also well-suited for graduate and postgraduate students, consultants, software developers, and professionals as an authoritative reference for day-to-day petroleum engineering problem solving. Read an interview with the editors to find out more: https://eos.org/editors-vox/integrated-workflow-approach-for-petroleum-engineering-problems
Download or read book New Developments in Sustainable Petroleum Engineering written by Rafiqul Islam and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum engineering is an engineering discipline concerned with the activities related to the production of hydrocarbons, which can be either crude oil or natural gas. Subsurface activities are deemed to fall within the upstream sector of the oil and gas industry, which are the activities of finding and producing hydrocarbons. This book presents current research in the study of sustainable petroleum engineering including topics such as optimisation techniques in groundwater monitoring network design for petroleum contaminant detection; a relation-analysis-based approach for assessing risks of petroleum-contaminated sites and an improved model for predicting formation damage induced by oilfield scales.
Download or read book History of Petroleum Engineering written by American Petroleum Institute and published by . This book was released on 2012-07-01 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributing Authors Include James A. Clark, E. DeGolyer, C. A. Warner, And Many Others.
Download or read book Advances in Petroleum Engineering and Petroleum Geochemistry written by Santanu Banerjee and published by Springer. This book was released on 2019-03-11 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume is based on the best papers accepted for presentation during the 1st Springer Conference of the Arabian Journal of Geosciences (CAJG-1), Tunisia 2018. The book is of interest to all researchers in the fields of petroleum engineering, reservoir engineering and petroleum geochemistry. The MENA region accounts for more than 50 percent of the world's hydrocarbon reserves. Despite being the largest oil and gas producer of the world, the MENA countries face routine problems regarding petroleum engineering, reservoir modelling and production optimization. This volume offers an overview of the latest information and ideas regarding reservoir engineering, petrophysical engineering, petroleum system modelling, non-conventional energy resources and environmental impact of oil production. Main topics include: 1. Advances in petrophysical characterization of reservoir rocks2. Enhanced oil recovery methods 3. Advances in petroleum exploration and management 4. Evaluation of hydrocarbon source potential and petroleum system modeling5. Non-conventional energy resources
Download or read book Standard Handbook of Petroleum and Natural Gas Engineering Volume 1 written by William C. Lyons and published by Gulf Professional Publishing. This book was released on 1996-10-16 with total page 1450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum engineering now has its own true classic handbook that reflects the profession's status as a mature major engineering discipline. Formerly titled the Practical Petroleum Engineer's Handbook, by Joseph Zaba and W.T. Doherty (editors), this new, completely updated two-volume set is expanded and revised to give petroleum engineers a comprehensive source of industry standards and engineering practices. It is packed with the key, practical information and data that petroleum engineers rely upon daily. The result of a fifteen-year effort, this handbook covers the gamut of oil and gas engineering topics to provide a reliable source of engineering and reference information for analyzing and solving problems. It also reflects the growing role of natural gas in industrial development by integrating natural gas topics throughout both volumes. More than a dozen leading industry experts-academia and industry-contributed to this two-volume set to provide the best , most comprehensive source of petroleum engineering information available.
Download or read book Fundamentals of Fractured Reservoir Engineering written by T.D. van Golf-Racht and published by Elsevier. This book was released on 1982-04-01 with total page 729 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the modem language of reservoir engineering by reservoir description is understood the totality of basic local information concerning the reservoir rock and fluids which by various procedures are extrapolated over the entire reservoir. Fracture detection, evaluation and processing is another essential step in the process of fractured reservoir description. In chapter 2, all parameters related to fracture density and fracture intensity, together with various procedures of data processing are discussed in detail. After a number of field examples, developed in Chap. 3, the main objective remains the quantitative evaluation of physical properties. This is done in Chap. 4, where the evaluation of fractures porosity and permeability, their correlation and the equivalent ideal geometrical models versus those parameters are discussed in great detail. Special rock properties such as capillary pressure and relative permeability are reexamined in the light of a double-porosity reservoir rock. In order to complete the results obtained by direct measurements on rock samples, Chap. 5 examines fracturing through indirect measurements from various logging results. The entire material contained in these five chapters defines the basic physical parameters and indicates procedures for their evaluation which may be used further in the description of fractured reservoirs.
Download or read book Development in Petroleum Engineering 1 written by R. A. Dawa and published by . This book was released on 1985 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Petroleum Engineering written by and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for this book has arisen from demand for a current text from our students in Petroleum Engineering at Imperial College and from post-experience Short Course students. It is, however, hoped that the material will also be of more general use to practising petroleum engineers and those wishing for aa introduction into the specialist literature. The book is arranged to provide both background and overview into many facets of petroleum engineering, particularly as practised in the offshore environments of North West Europe. The material is largely based on the authors' experience as teachers and consultants and is supplemented by worked problems where they are believed to enhance understanding. The authors would like to express their sincere thanks and appreciation to all the people who have helped in the preparation of this book by technical comment and discussion and by giving permission to reproduce material. In particular we would like to thank our present colleagues and students at Imperial College and at ERC Energy Resource Consultants Ltd. for their stimulating company, Jill and Janel for typing seemingly endless manuscripts; Dan Smith at Graham and Trotman Ltd. for his perseverence and optimism; and Lesley and Joan for believing that one day things would return to normality. John S. Archer and Colin G. Wall 1986 ix Foreword Petroleum engineering has developed as an area of study only over the present century. It now provides the technical basis for the exploitation of petroleum fluids in subsurface sedimentary rock reservoirs.
Download or read book Applying Nanotechnology to the Desulfurization Process in Petroleum Engineering written by Saleh, Tawfik A. and published by IGI Global. This book was released on 2015-10-27 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: As regulations push the fossil fuel industry toward increasing standards of eco-friendliness and environmental sustainability, desulfurization (the removal of SO2 from industrial waste byproducts) presents a new and unique challenge that current technology is not equipped to address. Advances in nanotechnology offer exciting new opportunities poised to revolutionize desulfurization processes. Applying Nanotechnology to the Desulfurization Process in Petroleum Engineering explores recent developments in the field, including the use of nanomaterials for biodesulfurization and hydrodesulfurization. The timely research presented in this volume targets an audience of engineers, researchers, educators as well as students at the undergraduate and post-graduate levels.
Download or read book Unconventional Oil and Gas Resources written by Usman Ahmed and published by CRC Press. This book was released on 2016-04-05 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the shale revolution continues in North America, unconventional resource markets are emerging on every continent. In the next eight to ten years, more than 100,000 wells and one- to two-million hydraulic fracturing stages could be executed, resulting in close to one trillion dollars in industry spending. This growth has prompted professionals ex
